Related
Hi,
Setting up my SBS2003 for push mail on my Qtek 9100.
I have been following the Microsoft setup white papers.
(Step-by-Step Guide to Deploying Windows Mobile-based Devices with Microsoft Exchange Server 2003 )
Trouble is the certificates seem to be causing the problem.
I copy across the only one found in my server clientsapps/sbscert directory ,( its called SBSCert.) to my qtek and it wont run.
It says cannot access certificate.
I tried loading the spaddcert file then adding the certificate and it says not a valid certificate.
CAn someone help me on this?
thanks,
Dave.
Hi,
Check out http://www.msexchange.org for MS Exchange information.
They have lots of information of MS Exchange server stuff. This site is mainly for the XDA/MDA related stuff.
-Tim
I'm going to assume you've already created a certificate (easiest way is through the Connect to Internet Wizard)
On your SBS server run mmc from the Run line. Then go to File - Add/Remove Snapi-n. Click Add and add the Certificates snap-in.
Then open the Certificate snap-in. Drill down to Trusted Root Certification Authorities\Certificates and locate the certificate that you created. Right click , All Tasks, Export. Export to der encoded binary (the first one). Now copy that file to your device, execute and all should be well!
Hope that helps.
thanks but i'm not sure now what I'm looking for.
Anybody who has it working can you provide me with some help.
You need to export the certificate you created and then install it on your device.
To export:
Open internet explorer and then click,
Tools - internet options - content - certificates - trusted root certificates
locate the one you created, highlight it and then click export.
Follow through the instructions, and export it to a location where you can find it.
After you've exported it copy the exported cert' to your device.
Finally on your device navigate to the certificate and click on it.
Well it seems to be working at the moment.
Dr Puttingham has been a great help.
Just trying to sort it out so that I can turn SSL back on but other than that its working just fine.
Introducing the SslChainSaver
Here's a GREAT lil util I found that makes this all just a little easier!
http://blogs.msdn.com/windowsmobile/archive/2006/08/11/sslchainsaver.aspx
I ran into this as I'm writing a cab will install my self gererated cert from my customized Extended ROM along with my many registry tweaks, etc and discovered that it's not that easy!
I am having a similar problem. My work's certificate is issued internally. I used Sslchainsaver to get the root.cr file and installed it on my T-Mobile MDA (on Cingular network). When it attemps to syncronize I get the following error:
You have an incorrect SSL certificate common name in the Host Name field. For example, you may have entered www.tailspintoys when the common name on the certificate is actually www.wingtiptoys.com. Make sure the server name is entered correctly.
Support Code: 0x80072F06
Any help would be really appreciated since I have been trying to get this to work for quite sometime now.
Thanks
@azaouk - my rule of thumb has always been to name this with the Fully Qualified Name (FQN) of my mx record. For instance say my domain is www.whyeatme.com. I would typically create a "A" record for "mail.whyeatme.com" or such. Then I create my self gernerated certificate with that same name. It's telling you what it's complaint is ...
Dr Puttingham said:
I'm going to assume you've already created a certificate (easiest way is through the Connect to Internet Wizard)
Click to expand...
Click to collapse
Hi all !
So... how about assuming I didn't create the user certificate yet...
The thing is, I already had to do that for one user, worked fine, created a user.cer file, and already have a mobile.cer file, if I put them both on a windows mobile device, mails arrive from the exchange server.
Now I have to do this again, but I don't remember how I did it and however I did this all alone last time, it seems I'm unable to retreive that path again...
So, I'm not sure we are talking about the same method here, I do this very very simple, but I'm sure someone here can tell me how I just get that cer file for a specific user.
Thanks in advance !!
Michel
Hi all
First of all great forum, found lots of help in here so far.
But I have come up blank with my current problem, tried to google and all, to no avail...
I want to use my TyTN II to log on to my bank on PIE, but the bank use signed JAVA applets, and the closest I came was thunderhawk. But none of the browsers for PDA seem to be able to use signed applets.
My bank has no plans whatsoever to implement web access from PDA´s or WM powered devices, so I´m still trying to find a way to run signed applets in PIE.
You could argue that I should figure out another way to access my info (sms, phone call and stuff), but this has intrigued me so I´m bend on trying to figure out a way
If any of you have an idea or solution, please let me know
Hey guys and girls,
I am am about to give up on my search for a working, cisco compatible, VPN client for Windows Mobile 6 on my Kaiser.
After some research I found out that one of the following clients should work with Cisco networks: MovianVPN, BluefireVPN and AnthaVPN.
Got myself a copy of each software, but none works.
MovianVPN v4.01 - most promissing, cause Cisco profiles can be directly importet. but it seems to be only for WinMo2003. Installations works without problems, but afterwards you can't start the client.
BluefireVPN v2.1.1 - installation doesn't even work
AnthaVPN v7.5 - installation without problems, client runs without problems, but: after installation the Kaiser can't establish a w-lan connetion anymore (not at all! even when Antha isn't running) Antha installs an own weird w-lan driver, which seems to mess things up
Please! I am close to madness. There must be someone out there wo knows a way how to connect to Cisco VPN with the Kaiser!
Thanks for any helpfull answer in advance!
regards,
cartonneexpress
NCP Secure
Hi,
I have used NCP secure to connect to a cisco VPN, here are a few links:
Compatability List: http://english.cyprotect.com/main0182.php(check for kaiser, it's mentioned somewhere)
NCP Secure Link: http://www.ncp.de/en.html
Hope this helps...
AnthaVPN support - nice try... but, ...nope
AnthaVPN support just sent me the following:
>>
Check this option from a forum:
After installing anthaVPN and change the registry entro from "2" -> "1" WIFI works correct.
HKLM\Comm\TNETW12511\Parms\HTCPowermode=1
<<
I looked at the registry, but had to find out that this entry was already set to "1" at my device.
it sounded so promising...
NCP Security Client...
Hey Reaper,
thanks for the advice! Installation of NCP was no problem. Everything seems to work fine afterwards.
But I have some trouble converting my Cisco profiles to NCP. NCP doesn't accept /convert the Cisco profiles (.pcf). I tried to create a new NCP profile with the information I got out of the Cisco ones. This is all the information that was in there:
Host
GroupName
GroupPWD
(after connection Cisco asks me for my personal login name and pwd)
I tried to bring these informations into a NCP profile, but it didn't work. Can you tell me how I must create the NCP profile?
Thanks,
cartonneexpress
By the way, I'm still open for other suggestions! Especially how to get MovianVPN working. Cause I could use the existing .pcf profile with it! Isn't there a coder out there who knows how to get a WinMo2003 programm running on 6.1?
Hi all,
I just upgraded my HD from Davideuck_6.5_V-3 to V-4, to solve the problem i had with ActiveSync and Exchange Server. (Error Code 0x80070057)
Still, I get the same error:
After the first sync, code 0x80070057 and no more synchronisation with the server. After I delete the setup or hard reset the device, it works again for one sync.
Could this happen to be a WM 6.5 problem?
Regards, Greg
Maybe you should post this in the thread for Davideuck's rom, instead of starting a new thread?
Google is your friend...
This error code has something to do with a large no. sub-folders (20 or more).
http://www.google.com/search?q=0x80070008
Out of Memory.
Sorry, had the wrong error code (copy-paste), but believe me, I googled it a lot...
does your exchange server use ssl?
rklosinski said:
does your exchange server use ssl?
Click to expand...
Click to collapse
Yes, it does.
Have gone back to a 6.1 Rom. Everything seems to work fine now.
greg2011 said:
Yes, it does.
Have gone back to a 6.1 Rom. Everything seems to work fine now.
Click to expand...
Click to collapse
I have 6.5 and i have the same problem. Deleting and creating again gives one Instance of Sync but then again the error appears from the 2nd time onwards.
i Like the 6.5 - can someone please help me with the error?
to all
salim1001 said:
I have 6.5 and i have the same problem. Deleting and creating again gives one Instance of Sync but then again the error appears from the 2nd time onwards.
i Like the 6.5 - can someone please help me with the error?
Click to expand...
Click to collapse
Hi all,
I posted some comments on this already in the WM6.5 thread of Davide.
I am on his ROM and everything works perfect. I can sync in an sort that is possible.
the errorcode is not unique und has several meanings
I think if it does not work over the air, it is an issu in the connection settings. Can you surf the web using only phon uplink ? If not, delet the proxysettings in the connection string.
If yes it seems you are having an issue with the certificate, this might be related to 6.5 but dont think so really. I have enrolled certificates to my device for WIFI Access and it works too. I can even sync using WiFi.
On last guess: change the local to German, test and change back. Please provide feedback to this last guess
drhoros said:
Hi all,
I posted some comments on this already in the WM6.5 thread of Davide.
I am on his ROM and everything works perfect. I can sync in an sort that is possible.
the errorcode is not unique und has several meanings
I think if it does not work over the air, it is an issu in the connection settings. Can you surf the web using only phon uplink ? If not, delet the proxysettings in the connection string.
If yes it seems you are having an issue with the certificate, this might be related to 6.5 but dont think so really. I have enrolled certificates to my device for WIFI Access and it works too. I can even sync using WiFi.
On last guess: change the local to German, test and change back. Please provide feedback to this last guess
Click to expand...
Click to collapse
Im sorry, but none of your guess helped me to fix the problem . I think, I'll downgrade to davideuck V3
hi,
I think we found a solution. on the 2k3 exchange server we configured only html-messages (not html or plain text). up to now, the second, third sync and the automatic direct push works fine with 2k3. to configure the exchange server:
Exchange System Manager -> „Internet-message-format“.
Attention! this is not the solution for everyone. In a heterogen mailenviroment with MACs und Unix this could produce some problems!
have fun
greg2011 said:
Hi all,
I just upgraded my HD from Davideuck_6.5_V-3 to V-4, to solve the problem i had with ActiveSync and Exchange Server. (Error Code 0x80070057)
Still, I get the same error:
After the first sync, code 0x80070057 and no more synchronisation with the server. After I delete the setup or hard reset the device, it works again for one sync.
Could this happen to be a WM 6.5 problem?
Regards, Greg
Click to expand...
Click to collapse
I have the same issue, i tested the Davideuck_6.5V4 and Miri 6.5 V1 & V3, synchronisation worker on the beginning now I have the same issue, may be link to 6.5 and Activesync4.5...
0x80070057 is related only to emails. if you uncheck email sync in active sync rest works ok.
chalx said:
0x80070057 is related only to emails. if you uncheck email sync in active sync rest works ok.
Click to expand...
Click to collapse
It's right, but it's better with emails...
Someone found a solution?
trappers said:
hi,
I think we found a solution. on the 2k3 exchange server we configured only html-messages (not html or plain text). up to now, the second, third sync and the automatic direct push works fine with 2k3. to configure the exchange server:
Exchange System Manager -> „Internet-message-format“.
Attention! this is not the solution for everyone. In a heterogen mailenviroment with MACs und Unix this could produce some problems!
have fun
Click to expand...
Click to collapse
I give up same problem again....and the message format is plain text again on my mobile. no chance to change.....
dam...back to wm6.1
direct push without mail is nothing
Hi All,
I am not sure if you already have an answer for this but this is what i did which resolved the similar problem for me.
Sounds Easy!!
1 - uncheck all (emails,contacts,calendar etc) from options
2- save the uncheck.
3 - go back and check back again but only your calendar and save it and hit sync. Once this is done, check another one and sync and then another and sync and Hopefully this should resolve the issue for everyone who is getting an error for 0x80070057.
Please Note : check one item and Sync. checking all and syncing would pop up an error again.
Enjoiiiiiiiii
Hey Guys,
I'm trying to setup my Exchange Server 2010 for Active Sync with my O2 XDA Diamond 2 (HTC Touch Diamond 2 bought at O2 Germany). Synchronization without SSL works just fine, but since I don't like my Login to be sent in clear text, I'm trying to setup SSL support, and that's where the problems started. Since I'm using my own CA the certificates issued aren't recognized as trustworthy. This applies to the SSL-certificates too.
When I try to install my own root-cert. on the device (by dubble-clicking on the cert) it says "Certificate successfully installed", but when I take a look into the cert.-store it has only been installed as "Zwischenzertifizierungsstelle" not as "Stamm/Root". I've been searching for hours now, but I can't come up with a resolution. Even tried to copy the registry keys under HKCU\Comm\Security\SystemCertificates\ but had no success either.
Hope someone can help me with my problem cause I really don't want to spend money for those expensive certs just for private use.
Cheers and keep up the good work!
Try this cab, should disable certificate warning.
Thanks for the hint, but as far as I know those are only the certificates for unsigned apps. Didn't have any problems with that yet, thank you anyway.
Maybe O2 locked the root certificate store. Anybody knows something about that? Especially how to unlock the store without HardSPL?