Related
Folks,
Used to have a HTC Universal (Vodafone v1640) that I never got working with Vodafone Live in the UK. Now have a v1615 (Kaiser) and wondering if this device can be made to work and access Vodafone Live.
I'm fairly technically literate (though not an expert!) and have to admit to getting a touch lost on a couple of things I've read on various websites. Not to sure how to change registry settings on my machine, but no probs learning, and very familiar with all the standard wap settings etc required.
My v1640 used to just hang if i pointed it to "www.live.vodafone.com", my Kaiser will now access the site but gives the following error in Explorer:
"Unable to determine IP address from host name for www.live.vodafone.com
The dnsserver returned:
Name error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL. Check if the address is correct"
I never got this error message on the 1640 - it just sat there and did nothing. So i'm wondering if this is any further progress or not? Or are these HTC devices (as Vodafone confirmed today) just not meant to connect to Live without serious tweaking.
I am more than happy to have a hack at my machine but am slightly lost at where to start here in order to achieve this on my brand new device for which there still doesn't seem to be much info.
Have Vodafone got this device almost ready to access Live? Or is one of the posts i've seen somewhere just a fantasy?!
All I really need is just a basic guide going through it with this new device.
Can't believe Vodafone don't have this working in the first place...
Thanks.
Isn't it live.vodafone.com rather than www.live.vodafone.com?
yes, and you need some proxy settings as well to use it. the only way I got Live.vodafone.com to work was by adding it as a modem connection under my work network if you are looking to use it as a data plan only and it will only work with EAS and PIE, no VOIP or messenger will work. As for using the vodafone live site, you need to change some regkey settings that will fool the the vodafone proxy to think that you have an approved handset for vodafone live, you should find examples in this forum if you search around, I think Modaco also has some entries on this. Bottom line is that Vodafone never intended to let it be used with PPC, because once they loose that control they cannot sell their services, advertise etc which is why it's a relatively useless solution for anyone who use their offer of 500 MB for 10 Eur or something along those lines.
Cheers
LBN
Thanks guys. Yes - it is just live.vodafone.com - was too busy with work...
Ok, starting to get an idea of what needs to be done. Have seen so many posts on various websites that I wasn't quite sure where to start.
I'm guessing that changing the regkey settings is the first thing to try then? Is there an easy to use registry tweaking tool?
Been messing around for a while now and nothing I do seems to make any difference!
I've tried all kinds of different Reg Key settings, every combination of wap and internet access points, and nothing seems to change anything.
Basically no matter what i enter, (either wsp://live.vodafone.com or http://live.vodafone.com) it only connects through a wap connection, and it only brings up a very basic vodafoneLive series of text based web pages with no access to anything interesting.
Do WM6 devices such as mine have different Reg Key settings / areas that need modifying? I'm surprised that putting Nokia settings in, or any other setting has no effect at all!
Anyone??
The vodafone live portal requires a "template" to be present at the vodafone end which defines which screen size and content the device can handle. Unless Vodafone have created one for the v1615, you will need to alter the useragent to look like a device which does have a template...
Without a devices presenting its self as a supported device, you will not be able to access live services.
Why not look at the user agent of the Treo 500v? That is the frist real consumer WM device which has the ability to view the live portal.
Gotcha. Makes sense, thanks for the tip.
Any idea where to find details of a Treo 500v user agent?? Will give it a go if I know where to find one!
Hi,
Take a look at
http://www.modaco.com/Vodafone-Live-Settings-t259142.html
Guys,
I just got a Vodafone Treo 750v which i really like. but it doesn't have Vodafone Live or Mobile TV access on it as standard. I managed to get my Tytn II working (with your help and the Modaco forum) several months ago and now I'm trying to see if you or anyone can get my 750v working.
First thing i did was install a cab file (from the thread in the post above) on my machine and setup a wap connection and i was straight in to Vodafone Live all of a sudden. Got to mobile tv page but Windows media player wouldn't connect via wap. So went to xda-developers page and downloaded the HTC v2.10 streaming player and installed it and set it up to connect via wap.
Success, almost - choosing a channel to watch now launches the HTC player and starts to buffer the video but when it gets to almost 100% buffered and is ready to start showing video it suddenly hangs, then has an error and wants to send an error log to Microsoft. Its almost like the HTC player is missing something or some codec or dll file.
Anyone know how to crack this last bit? Anyone use a different Streaming media player to do this?
Hope someone can help!
Paul
Hi all
First of all great forum, found lots of help in here so far.
But I have come up blank with my current problem, tried to google and all, to no avail...
I want to use my TyTN II to log on to my bank on PIE, but the bank use signed JAVA applets, and the closest I came was thunderhawk. But none of the browsers for PDA seem to be able to use signed applets.
My bank has no plans whatsoever to implement web access from PDA´s or WM powered devices, so I´m still trying to find a way to run signed applets in PIE.
You could argue that I should figure out another way to access my info (sms, phone call and stuff), but this has intrigued me so I´m bend on trying to figure out a way
If any of you have an idea or solution, please let me know
Hi everyone,
i went to a 3store today to get a TYTN 2 on 3 network UK. I thought we could use the free skype minutes they offer on other handsets, but they said no, use the wifi!!!
I was wondering if anyone knows a way to connect to their skype service. Thanks
PS: Please include links to any software or recent methods you might know.
Hi, I'd also like to know if this possible. Have a 3 PAYG sim and get 30 days free skype when I pay for the internet add-on but cannot work out how to use the 3G network for my calls. Cheers
I think fring will do what you want.
The website says you can make skype calls.
www.fring.com "fring is based on a unique thin-client technology that for the first time enables true VoIP over 3G, GPRS and WiFi networks"
I installed it on my stock rom AT&T Tilt (Kaiser) but have not tested.
I hope that helps.
j
any java skype client in the uk?
jlewisdaville said:
I think fring will do what you want.
The website says you can make skype calls.
www.fring.com "fring is based on a unique thin-client technology that for the first time enables true VoIP over 3G, GPRS and WiFi networks"
I installed it on my stock rom AT&T Tilt (Kaiser) but have not tested.
I hope that helps.
j
Click to expand...
Click to collapse
Thanks but i think for that you should have access to the internet. I can easily use the skype program instead. The problem is that skype is not the type of skype 3 network is using ( they use a java based program).
I read an article and someone had used the skype from a LG phones with 3 and Esmertec Jbed, but that was an Australian version. does anyone have a UK version?
This would rock if it is possible! Anyone know where to download a UK version?
I think we need to find someone with a non nokia phone from 3 UK, so he can give us the jar file. preferably LG
What do you think?
anyone from uk? or anyone knows a professional UK website? please
Anyone found this?
Can anyone with a TyTn II from the 3 network confirm if it comes with Planet 3 and Skype software installed?
I use Three...
Ah, you forgot to read the ultra-small fine print that states that the offer for *all* phones has expired and it's now only on *selected* handsets that seem to exclude the TyTN 2, also you can't get the sim-only and install the Three free Skype or Live Messenger on a non-Three phone+rom without some custom ROM hacking.
To make matters worse, if you get the £5 Unlimited Internet Access, the small print is that Three block Skype and Live Messenger so they can't be used (thought I think you can buy the £10 option that allows them?) - even if you want to pay for them outside the unlimited bundle. You can use IM+ BeejiveIM etc, to access Live Messenger though, and as far as I'm aware it seems to be included in the Unlimited access...
Oh, and if you want to access Planet3/My3 on your phone you can do so, but first you need to go into Advanced Config and change your "User Agent Custom Base" to "HTC_TyTN_II Mozilla/4.0" and then use the URL "http://mobile.three.co.uk/837_sc/index.do"
The Planet3/My3 will only work when accessing the page though the 3 connection and not WiFI or ActiveSync, but is acuttaly pritty nifty at checking you accound balance, tops ups, addons and such like.
Percz said:
Ah, you forgot to read the ultra-small fine print that states that the offer for *all* phones has expired and it's now only on *selected* handsets that seem to exclude the TyTN 2, also you can't get the sim-only and install the Three free Skype or Live Messenger on a non-Three phone+rom without some custom ROM hacking.....
Click to expand...
Click to collapse
Thanks a lot for the information you provided. Damn it, I made a big mistake as i could've got the Nokia N95 with Skype and Live Msg + unlimited internet for £5 cheaper every month...!
Hi guys,
This is a solution for the Skype on Three network issue. I had placed it on another forum (http://www.3g.co.uk/3GForum/showthread.php?p=385677) and one guy has reported it working, but apparently, it might not work with WM5, only with WM6. Please give it a whirl and let me know if it works for you.
Feedback is great for both me as well as others
**********************************************************
Annuntio vobis gaudium magnum
(I have great and joyous news)
I believe that I have succeeded in getting the native Iskoot WM6 client for Skype to connect to the Three/3 service. I am still testing it and would appreciate your feedback.
Steps
a) Download and install the Iskoot client for Windows Mobile 6 . Try the direct link here (http://www.iskoot.com/pc_download/Wi...1.54_WMpro.CAB)
b) After installation, start the application, but DO NOT sign in. Instead exit it. The reason for doing this is to create the default registry entries for Iskoot.
c) Now start your favourite registry editor (I personally use Resco Registry Editor, but you should be able to use any. Please do not ask me how to use the registry editor. This is not the appropraite forum.)
d) Head for the following location in the registry: HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE
e) Update all the following entries to the same value "http://mobile.three.co.uk/948" (do not include the "double quotes")
BackupHost
CallUrl
DefaultSkHost
Pushhost
f) Exit the registry editor of choice and start and log into Iskoot. This might take some time. It took me about five minutes.
It should now be configured to connect to the 3 Skype service. To cross-verify, check that the registry key HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE\Cal lNumber has the value +447838333894 (the 3 Skype dial-out number). It should be automatically added by the software.
As I have mentioned earlier, I am still testing this. However, with this implementation, it should not use your included minutes, but the free Skype allocation. Please test the same and let us all know if that is the case or you have noticed that your inclusive minutes have been used up.
I do not know how to modify cabs. But if somebody can rebuild the original Iskoot cab with these settings built-in, that would be great.
I have noticed that the sound quality on this is considerably better as compared to the Skype Java client.
Legalese: The above is merely advisory and there is no warranty, implied or otherwise, for the same.
**********************************************************
Thanks for the information. I tried it on my Hermes and it worked great.
Unfortunately, when I tried the same thing on my Kaiser, all I ever get is "Currently unable to connect".
I can't see why there would be any difference between the two phones, but the Hermes never fails and the Kaiser never succeeds!
Any suggestions?
Thankshttp://forum.xda-developers.com/images/icons/icon7.gif
stooby said:
"Currently unable to connect".
Click to expand...
Click to collapse
thanks for the info but unfortunately i get the same error meesage as i am using !!
secret.simon said:
Hi guys,
This is a solution for the Skype on Three network issue. I had placed it on another forum (http://www.3g.co.uk/3GForum/showthread.php?p=385677) and one guy has reported it working, but apparently, it might not work with WM5, only with WM6. Please give it a whirl and let me know if it works for you.
Feedback is great for both me as well as others
**********************************************************
Annuntio vobis gaudium magnum
(I have great and joyous news)
I believe that I have succeeded in getting the native Iskoot WM6 client for Skype to connect to the Three/3 service. I am still testing it and would appreciate your feedback.
Steps
a) Download and install the Iskoot client for Windows Mobile 6 . Try the direct link here (http://www.iskoot.com/pc_download/Wi...1.54_WMpro.CAB)
b) After installation, start the application, but DO NOT sign in. Instead exit it. The reason for doing this is to create the default registry entries for Iskoot.
c) Now start your favourite registry editor (I personally use Resco Registry Editor, but you should be able to use any. Please do not ask me how to use the registry editor. This is not the appropraite forum.)
d) Head for the following location in the registry: HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE
e) Update all the following entries to the same value "http://mobile.three.co.uk/948" (do not include the "double quotes")
BackupHost
CallUrl
DefaultSkHost
Pushhost
f) Exit the registry editor of choice and start and log into Iskoot. This might take some time. It took me about five minutes.
It should now be configured to connect to the 3 Skype service. To cross-verify, check that the registry key HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE\Cal lNumber has the value +447838333894 (the 3 Skype dial-out number). It should be automatically added by the software.
As I have mentioned earlier, I am still testing this. However, with this implementation, it should not use your included minutes, but the free Skype allocation. Please test the same and let us all know if that is the case or you have noticed that your inclusive minutes have been used up.
I do not know how to modify cabs. But if somebody can rebuild the original Iskoot cab with these settings built-in, that would be great.
I have noticed that the sound quality on this is considerably better as compared to the Skype Java client.
Legalese: The above is merely advisory and there is no warranty, implied or otherwise, for the same.
**********************************************************
Click to expand...
Click to collapse
The iskoot link is http://www.iskoot.com/pc_download/WindowsMobile/iSkootForSkype1.1.54_WMpro.CAB
How do you get the address http://mobile.three.co.uk/948? I am looking for the same thing for three italy, so I cannot use that url. I have Kaiser and a three skypephone, wich include 10 hours per day of free skype call, so I will love to use the iskoot software on Kaiser and lunch outside the windows the Amoi!
Thanks
Masy said:
thanks for the info but unfortunately i get the same error meesage as i am using !!
Click to expand...
Click to collapse
For Windows Mobile 6.1, MS .net Framework 3.5 is required, otherwise, "Currently unable to connect" error might appear
SkypeOut is officially supported (if not, very soon) by 3UK,
http://www.skype.com/intl/en-gb/allfeatures/3skypephone/overseascalling/
with some restrictions (read the small print!)
I failed to get Skypein to work, however.
And Skypeout is a bit unstable at the moment, might be 3UK is upgrading their servers...
alex_time said:
How do you get the address http://mobile.three.co.uk/948? I am looking for the same thing for three italy, so I cannot use that url. I have Kaiser and a three skypephone, wich include 10 hours per day of free skype call, so I will love to use the iskoot software on Kaiser and lunch outside the windows the Amoi!
Thanks
Click to expand...
Click to collapse
I think what some people did is to download a java version of the iskoot (for other non-WM phone) and decompiled the java class/jad file and find the URL string. I guess if you can somehow intercept the outgoing network traffic from a 3 customized iskoot client running on another phone (perhaps on a Symbian phone trying to communicate to the server via wifi, which wouldn't connect successfully I believe, but still let you), parse the network packet to find out its intended destination will do the trick too.
deityuk said:
I think what some people did is to download a java version of the iskoot (for other non-WM phone) and decompiled the java class/jad file and find the URL string. I guess if you can somehow intercept the outgoing network traffic from a 3 customized iskoot client running on another phone (perhaps on a Symbian phone trying to communicate to the server via wifi, which wouldn't connect successfully I believe, but still let you), parse the network packet to find out its intended destination will do the trick too.
Click to expand...
Click to collapse
Thanks for the tip, but the problem is that the only phone with skype is the amoi 8512 (http://www.3skypephone.com/english/index.html have you ever seen it?) I do not have x-series with skype, but a specific offer wich works only with this phone. This phone does not have wifi, so I cannot sniff packet through network, and the iskoot client is not java, but specifically made for it (when I run it, the Java log does not apper), so I do not know how I could extract the url. The only thing I have done is to get its user agent to replace it on the Tytn II, the Amoi 8512 user agent is " [FONT="]Amoi 8512/R22.0 NF-Browser/3.3[/FONT]" without double quote, of course.
alex_time said:
Thanks for the tip, but the problem is that the only phone with skype is the amoi 8512 (http://www.3skypephone.com/english/index.html have you ever seen it?) I do not have x-series with skype, but a specific offer wich works only with this phone. This phone does not have wifi, so I cannot sniff packet through network, and the iskoot client is not java, but specifically made for it (when I run it, the Java log does not apper), so I do not know how I could extract the url. The only thing I have done is to get its user agent to replace it on the Tytn II, the Amoi 8512 user agent is " [FONT="]Amoi 8512/R22.0 NF-Browser/3.3[/FONT]" without double quote, of course.
Click to expand...
Click to collapse
I was in your situation until a week ago when I found the 3 UK setting. It is so frustrating that I knew all it requires is a correct URL address yet I didn't know what it is!
What you may want to try is to first identify which X-series phone that 3 Italy support apart from the skypephone. And then change your Tytn II 's broswer agent string to one of those phone that use a JAVA iskoot client instead of a native client like Symbian client. Then use your phone browser to 3 ITA portal and try to download the iskoot (Skype) software. 3 ITA server should now think that you have a compatible phone so it will present you with the Java client. Once you go the .jar file, you can proceed to extract the URL from there...
I think people used SEW910I to get the 3 Australia client.
Try this for the Browser agent string:
SonyEricssonW910i/R1CA Browser/NetFront/3.4 Profile/MIDP-2.1 Configuration/CLDC-1.1
I tried the above suggestion myself to try to get the URL from 3 UK's client, but I can't remember why I stopped, and then later I found that the URL is already know on some other forums on the Internet...
Good luck!
deityuk said:
I was in your situation until a week ago when I found the 3 UK setting. It is so frustrating that I knew all it requires is a correct URL address yet I didn't know what it is!
What you may want to try is to first identify which X-series phone that 3 Italy support apart from the skypephone. And then change your Tytn II 's broswer agent string to one of those phone that use a JAVA iskoot client instead of a native client like Symbian client. Then use your phone browser to 3 ITA portal and try to download the iskoot (Skype) software. 3 ITA server should now think that you have a compatible phone so it will present you with the Java client. Once you go the .jar file, you can proceed to extract the URL from there...
I think people used SEW910I to get the 3 Australia client.
Try this for the Browser agent string:
SonyEricssonW910i/R1CA Browser/NetFront/3.4 Profile/MIDP-2.1 Configuration/CLDC-1.1
I tried the above suggestion myself to try to get the URL from 3 UK's client, but I can't remember why I stopped, and then later I found that the URL is already know on some other forums on the Internet...
Good luck!
Click to expand...
Click to collapse
You are right, it is frustriating knowing I cannot use my Kaiser just because I do not know a simple url!!
I will have a look at this right now. Thanks for your help
Hi guys,
I have had to get a new Tytn II here in Australia due to water damage on previous model .... a real fun time
Previous model had WM60, this one has WM6.1.
W 61 is creating a problem cos I run a program called Winterface. I love it - does what I want. However the previous manner in which Winterface operated (notifications, program handling ...) is not happening.
I contacted Winterface and they asked me to download newest version to see if that would fix things. I have but I cannot install it.
I get the following message:
"The file PowerDemon' cannot be opened. Either it is not signed with a trusted certificate, or one its components cannot be found. If the problem persists, try reinstalling or restoring this file. "
So is there a way of disabling certificate checking from within 6.1??
looked on the phone and via google but nuthin has come up...
Cheers
Get Kaiser Tweak for this forum and there is a setting where you can disable certificate checking. It sounds like it's more of an app problem than anything else.
Thanks for that - i have installed Kaiser Tweak and the problem persists. Definitely an app issue. The VITO support is helping me at the moment so hopefully a resolution is in sight.
cheers
shaunl said:
"The file PowerDemon' cannot be opened. Either it is not signed with a trusted certificate, or one its components cannot be found. If the problem persists, try reinstalling or restoring this file. "
Click to expand...
Click to collapse
Well, you have your answer right there.
Only 2 choices: either ask Vito to correctly signed their apps and files (most likely), or they really gave you crappy app with something missing.
BTW: Vito is well-known crapapp maker.
It started as very innovative company - now its just moneymaking crapola.
shaunl said:
"The file PowerDemon' cannot be opened. Either it is not signed with a trusted certificate, or one its components cannot be found. If the problem persists, try reinstalling or restoring this file. "
Click to expand...
Click to collapse
Well, you have your answer right there.
Only 2 choices: either ask Vito to correctly sign their apps and files, or they really gave you crappy app with something missing.
BTW: Vito is well-known crapapp maker.
It started as very innovative company - now its just moneymaking crapola.
@MACkjam
No user of commercial software (which he *paid for*) should have ever resolve to "unlocking" his phone or such in order to use the commercial software on it, man... its a blasphemy
Just to be certain, check the security level with this tool on your Kaiser:
http://www.microsoft.com/downloads/...8C-D587-47E0-908B-09FEE6EA517A&displaylang=en
It may still be an unsigned module problem... Be careful when you change security levels, it may be impossible to reset them without a hard reset.
Hi guys,
VITO responded to my email outlining that disabling the security check did nothing.
A new version of Winterface was released (1.15) and voila it installed and runs as it used to under W6.0. VITO help was great and it looks like problem solved.
-888- - I was interested in your comment on VITO being a crapapp maker. I have found Winterface, SMS chat and zoomboard really good apps - in fact the best I have seen for Win Mobile. Just my opinion of course.
many thanks to everyone for their input and help - really appreciated!
BTW - I will be using Kaiser to reset the certificate checking.
Cheers
Shaun
Hi all,
I just upgraded my HD from Davideuck_6.5_V-3 to V-4, to solve the problem i had with ActiveSync and Exchange Server. (Error Code 0x80070057)
Still, I get the same error:
After the first sync, code 0x80070057 and no more synchronisation with the server. After I delete the setup or hard reset the device, it works again for one sync.
Could this happen to be a WM 6.5 problem?
Regards, Greg
Maybe you should post this in the thread for Davideuck's rom, instead of starting a new thread?
Google is your friend...
This error code has something to do with a large no. sub-folders (20 or more).
http://www.google.com/search?q=0x80070008
Out of Memory.
Sorry, had the wrong error code (copy-paste), but believe me, I googled it a lot...
does your exchange server use ssl?
rklosinski said:
does your exchange server use ssl?
Click to expand...
Click to collapse
Yes, it does.
Have gone back to a 6.1 Rom. Everything seems to work fine now.
greg2011 said:
Yes, it does.
Have gone back to a 6.1 Rom. Everything seems to work fine now.
Click to expand...
Click to collapse
I have 6.5 and i have the same problem. Deleting and creating again gives one Instance of Sync but then again the error appears from the 2nd time onwards.
i Like the 6.5 - can someone please help me with the error?
to all
salim1001 said:
I have 6.5 and i have the same problem. Deleting and creating again gives one Instance of Sync but then again the error appears from the 2nd time onwards.
i Like the 6.5 - can someone please help me with the error?
Click to expand...
Click to collapse
Hi all,
I posted some comments on this already in the WM6.5 thread of Davide.
I am on his ROM and everything works perfect. I can sync in an sort that is possible.
the errorcode is not unique und has several meanings
I think if it does not work over the air, it is an issu in the connection settings. Can you surf the web using only phon uplink ? If not, delet the proxysettings in the connection string.
If yes it seems you are having an issue with the certificate, this might be related to 6.5 but dont think so really. I have enrolled certificates to my device for WIFI Access and it works too. I can even sync using WiFi.
On last guess: change the local to German, test and change back. Please provide feedback to this last guess
drhoros said:
Hi all,
I posted some comments on this already in the WM6.5 thread of Davide.
I am on his ROM and everything works perfect. I can sync in an sort that is possible.
the errorcode is not unique und has several meanings
I think if it does not work over the air, it is an issu in the connection settings. Can you surf the web using only phon uplink ? If not, delet the proxysettings in the connection string.
If yes it seems you are having an issue with the certificate, this might be related to 6.5 but dont think so really. I have enrolled certificates to my device for WIFI Access and it works too. I can even sync using WiFi.
On last guess: change the local to German, test and change back. Please provide feedback to this last guess
Click to expand...
Click to collapse
Im sorry, but none of your guess helped me to fix the problem . I think, I'll downgrade to davideuck V3
hi,
I think we found a solution. on the 2k3 exchange server we configured only html-messages (not html or plain text). up to now, the second, third sync and the automatic direct push works fine with 2k3. to configure the exchange server:
Exchange System Manager -> „Internet-message-format“.
Attention! this is not the solution for everyone. In a heterogen mailenviroment with MACs und Unix this could produce some problems!
have fun
greg2011 said:
Hi all,
I just upgraded my HD from Davideuck_6.5_V-3 to V-4, to solve the problem i had with ActiveSync and Exchange Server. (Error Code 0x80070057)
Still, I get the same error:
After the first sync, code 0x80070057 and no more synchronisation with the server. After I delete the setup or hard reset the device, it works again for one sync.
Could this happen to be a WM 6.5 problem?
Regards, Greg
Click to expand...
Click to collapse
I have the same issue, i tested the Davideuck_6.5V4 and Miri 6.5 V1 & V3, synchronisation worker on the beginning now I have the same issue, may be link to 6.5 and Activesync4.5...
0x80070057 is related only to emails. if you uncheck email sync in active sync rest works ok.
chalx said:
0x80070057 is related only to emails. if you uncheck email sync in active sync rest works ok.
Click to expand...
Click to collapse
It's right, but it's better with emails...
Someone found a solution?
trappers said:
hi,
I think we found a solution. on the 2k3 exchange server we configured only html-messages (not html or plain text). up to now, the second, third sync and the automatic direct push works fine with 2k3. to configure the exchange server:
Exchange System Manager -> „Internet-message-format“.
Attention! this is not the solution for everyone. In a heterogen mailenviroment with MACs und Unix this could produce some problems!
have fun
Click to expand...
Click to collapse
I give up same problem again....and the message format is plain text again on my mobile. no chance to change.....
dam...back to wm6.1
direct push without mail is nothing
Hi All,
I am not sure if you already have an answer for this but this is what i did which resolved the similar problem for me.
Sounds Easy!!
1 - uncheck all (emails,contacts,calendar etc) from options
2- save the uncheck.
3 - go back and check back again but only your calendar and save it and hit sync. Once this is done, check another one and sync and then another and sync and Hopefully this should resolve the issue for everyone who is getting an error for 0x80070057.
Please Note : check one item and Sync. checking all and syncing would pop up an error again.
Enjoiiiiiiiii