Related
Hi,
Is it possible to upgrade my Qtek 9100 without using an USB cable but a SD card. The reason is that my mini USB connection on the Qtek is broken. So I can't connect the Qtek with my computer.
If it is possible to upgrade with a SD card can anybody tell me how.
I havn't heard of doing it this way in a while. My old T-Mobile Pocket PC Phone Edition. "Space Needle" used to be flashed this way. You would load the Rom onto the SD card and use some type of key combination at boot to load the rom... I'm not sure that it exists with this rom and hardware...
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
Is it possible to make a rom image on a SDcard out of the the ROM's availiable om this forum? And how can this be done.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
would you please tell breifly how can we have rom image on sdcard ????
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
yes i have cid unlocked imate kjam
clemsyn said:
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
Click to expand...
Click to collapse
I have CID unlocked my phone so that's no problem. But how do I upgrade with a SDcard and how to make an image on a SD card.
Who can help.
put your phone in bootloader mode (make sure you have minisd in the slot)...disable activesync on your computer by stopping wcecomm process...then plug in the phone (while it's in bootloader)..then run romupdate_115.exe (look for it in the xda ftp). Then choose the usb connection (I think it's wcusb or something)..press enter..cmd> should appear...then type r2sd all (this will backup everything in the phone to the minisdwhen it completes).
Then when you put it in the phone you want to upgrade..put that minisd in the phone you want to upgrade and put that phone in bootloader. It will ask you if you want to update and press the voice command button to upgrade. Goodluck!
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
Not as far as I know my friend ..... sorry
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
If needed, PM Me and you can send me a MiniSD card to load a rom onto for you. and I'll ship it back. Let me know which rom you want loaded, and I will do it for you.
Actually somebody with an CID unlocked wizard can create an SD image and then upload it to the website for you to upload and use but it will definitely wipe out the data on their SD.
I'm in the same boat. My miniUSB port fell in. I need to get the t-mobile ROM back onto the phone so I have a chance of repair. If anyone could upload a ROM onto the forum that will let me update using a miniSD card I’d be very grateful.
At least I’m not the only one who's USB port has broke!
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
Assuming /dev/sda is the device pointing to your SD card reader, and /tmp/sd.img is the sd card image file, in Linux you can extract it with this command:
Code:
dd if=/dev/sda of=/tmp/sd.img
And you can write it back on another SD card with this command:
Code:
dd if=/tmp/sd.img of=/dev/sda
in Windows you can use psdread.exe and psdwrite.exe, see the wiki for instructions:
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdread.exe
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdwrite.exe
If anyone makes an Original SD ROM of tmobile...Please upload it at ftp. It would help lots of people here in the forum..
Upload of stock TMobile Rom to SD card
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
peraltah said:
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
Click to expand...
Click to collapse
My file isn't from teh FTP, its from my phone. I made a b/u before I installed X's rom on day 3 of my MDA ownership. Like I said, I think there's a way to pull the image off the card, but I'm not going to spend my time looking. If some one wants to find me instructions as well as links to programs needed, I'd be glad to post the image.
Restoring Tmobile USA Rom from SD card
Thats for all the info folks it worked perfectly and I will not have to cough up any money for me voiding the warrenty!!
Good Afternoon,
First i'd like to thank everyone for the great forum we built.
Don't know if anyone explained this before, but i was unable to find.
I've always been able to flash new roms. I've got SPL 1.07.ds. Last Rom I flashed was Finix'n'over 's Ultra Light.
Today, while trying to flash a new rom, i pressed ROMUpdateUtility.exe, as usual, everything seemed ok, but when into spl i just get serial port (not USB port) and PC just can't find the device. Anyone, plz?
Thanks in advance.
pjvieira said:
Good Afternoon,
First i'd like to thank everyone for the great forum we built.
Don't know if anyone explained this before, but i was unable to find.
I've always been able to flash new roms. I've got SPL 1.07.ds. Last Rom I flashed was Finix'n'over 's Ultra Light.
Today, while trying to flash a new rom, i pressed ROMUpdateUtility.exe, as usual, everything seemed ok, but when into spl i just get serial port (not USB port) and PC just can't find the device. Anyone, plz?
Thanks in advance.
Click to expand...
Click to collapse
You could either use the Flash from SD method, or use this Flash Utility attached. Unzip, then copy your RUU_Signed.nbh file to this folder and flash. I apologize, I don't know whose this is, but it works for me every time. I hope it works for you...
thanks for your fast reply.
Will try it as soon as i get home.
Was afraid i might had brick it.
pjvieira said:
thanks for your fast reply.
Will try it as soon as i get home.
Was afraid i might had brick it.
Click to expand...
Click to collapse
I think now days, there are so many work arounds, that it's pretty hard to end up with a permanant brick.
If what I sent does not work, reply back and let us know. I'm sure someone will get it going again.
Update: If it still does not flash using the above method, then try the SD method. Make sure you have an SD Card in your Trinity and that it is NOT an SDHC Card. Be sure it's formatted FAT32 and has NO NAME. Unzip the included attachment, and copy the SSPL.exe to your SD Card's Root Directory. Then rename the RUU_Signed.nbh file from the ROM of your choice to TRINIMG.nbh, and copy it to the Root Directory of your SD Card.
Go to the File Explorer, and browse to the SD Card Root Directory and run the SSPL.exe file. This should initiate the Flash Process. Again, good luck.
On rare occasion, I've not been able to flash any cooked ROM. In this case, flash back the OEM ROM originally installed on your Trinity. After this flash, it will work again with cooked ROMs.
Thanks for your help. None of the methods above seem to work.
How do i flash the original ROM if i cannot flash the TRIN?
Files needed for OEM ROM SD Card Flash
pjvieira said:
Thanks for your help. None of the methods above seem to work.
How do i flash the original ROM if i cannot flash the TRIN?
Click to expand...
Click to collapse
So the SD Method did not work either? Strange, try flashing the OEM, but for that purpose, I always use the SD Card method. So far, it's always worked.
Pull the RUU_Signed.nbh from the OEM ROM and rename it to TRINIMG.nbh, (I've done this step in the Linked zip file) Copy it to your SD Card and try that method... This will flash back your radio also, so you will need to update it again if you've changed it.
For my phone, I use this ROM:
This is the Full ROM - - My Mirror of Full ROM
Click Here for the needed files
Yours might need something else, but this works for me.
Thanks man!!! SD Flash works...
after you repeat the name in second post, i realise what i've done wrong...
TRINIMB.nbh -> On your first post about it, you wrote a "B". No big deal
Thanks a lot for your time!!!
pjvieira said:
Thanks man!!! SD Flash works...
after you repeat the name in second post, i realise what i've done wrong...
TRINIMB.nbh -> On your first post about it, you wrote a "B". No big deal
Thanks a lot for your time!!!
Click to expand...
Click to collapse
Oops! I'm VERY sorry about that. I try to watch my spelling, but I missed it.
Glad it works now!
Reverted back to original ROM. Doesn't change to USB either but forget it... i can always flash it from SD Card...
Thanks again...
pjvieira said:
Reverted back to original ROM. Doesn't change to USB either but forget it... i can always flash it from SD Card...
Thanks again...
Click to expand...
Click to collapse
Are you able to use the USB for Sync and data transfer? Wondering if it could be a bad USB Port on your Trinity. Or cable?
May i have a question?
I flash my PDA with micro sd with adapter.
Is it possible?
Thanks SuperSport!!! You rule... My stupidity got me to this state :S i recall one night, i missed the hole to softreset with stylus.... probably i caught the usb pin, which moved to the top of other pin...
Don't Know how ActiveSync continued detecting device.... got the pin into its correct position... Everything ok now! Thanks a lot for your patience and time man!!!
rubbish.guy said:
May i have a question?
I flash my PDA with micro sd with adapter.
Is it possible?
Click to expand...
Click to collapse
I have done it with an adapter, as long as it's NOT an SDHC card. My 2GB Micro SD in a Mini SD Adapter worked fine. Just be sure to follow the above instructions.
pjvieira said:
Thanks SuperSport!!! You rule... My stupidity got me to this state :S i recall one night, i missed the hole to softreset with stylus.... probably i caught the usb pin, which moved to the top of other pin...
Don't Know how ActiveSync continued detecting device.... got the pin into its correct position... Everything ok now! Thanks a lot for your patience and time man!!!
Click to expand...
Click to collapse
You are VERY welcome. Obviously you are not too stupid. I'm not sure others would have thought to look into the port for the bent pin. Good Work!
Need a favours over here. Recently, i bricked my trinity. P3600 more precisely Dopod D810 (i flashed wrong ROM -> Unpacking cooked rom for trinity but i merge it with -Hermes cmd in NBMerge! houh... so stupid! ). Soo... just not what i expected, Rom flashing stop on half, SR my trin and tada.... 3Color screen bootloader popup! haaarggg, i try flashing another rom using any rom that has same CID *official or cooked rom* (some are 100% thru, but someother not) but like usual it won't start the windows (just blank/black screen with green led[ always on!) Never been like this before! Have been flashing several times using any cooked rom by great chef on trinity but this time! :doh: damn it! my bad.
i found solution on the forum *Unbricking Trinity Stuck on Bootloader* but since my usb port can't be detected on my vista/xp machine, whether i disable AS and changed my usb cable it doesnt work at all, on mtty too! so i can't use that utility. i try run install sspl olipro 1.3 but it never changed my spl at all. now i can't use my trin at all cuz allready dead.
btw this is the info on trin 3color screen bootloader:
IPL 1.00
SPL 3.20 OLIPRO
anysolution for bringing back my trinity from the death? maybe a tools/utility to unbrick trinity from SD or something like that, which not involved any pc connection, without bring this devices to htc center of course.
I hope any expertise on this forum would helped me sort out this probs.
Sorry for my english and thanks for reading my post.
Read this :http://forum.xda-developers.com/showthread.php?t=308691 download splxploit-windows.zip (935.1 KB, 7619 views) put phone in bootloader run splxploit when bootloader change
After this download full rom here is link:http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.exe
Then flash full rom bat do not disconnect usb cable in any step.
Before use any step disable active sync.
Usb are dead
Gsmhacks thanks for ure reply. I have tried that one, and lot read ing on wiki. But since i cant use the usb i cant use that splexploit whether on live linuxcd, or .Net version even win version. The usb port cant be opened . I think i broke the usb pin. From the beginning everytime i flashed my trin i never used ruu utility, i always do the sd card method and that is the best and easiest method and it works for me.
I just curious perhaps can anyone or is there any utility to unbrick trin via sd card. I knew a lot a people has bring their trinity life from dead by using htc stackflow splexploit. I hope that was work for me too! Too bad my usb are dead. Damn!
Here what you need bat only work if you have hard spl
If you install hard spl before brick trinity you can use SD CARD to flash trinity. YOu need to formate sd card to FAT32 with Card Reader donwload full rom here is link: http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.exe
then extract and file RUU_Signed.nbh rename to TRINIMG.nbh and copy it to the root folder of your miniSD card.
Here is full instruction again also first format sd card to FAT32 !!!! VERY IMORTANT to format sd card to FAT32 or all other step will not work THEN:
1. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract (or you can also use winrar via wine).
2. Rename the .NBH file to TRINIMG.nbh and copy it to the root folder of your miniSD card.
3. With miniSD card inserted on the phone, start the bootloader (hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom).
4. You should see the screen pictured on the left, confirm flashing on screen by pressing the power button.
5. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
6. When flashing completes soft-reset your device.
and you will flash and unbrick trinity bat this only work if you install before this hard spl i mean cid unlock trinity. if not you must fix usb port.
That will work? I hope so
Ok then i'll try flashing using that rom. Oo, i have install hardspl btw and so far flashing using sdcard method no probs. But after i bricked my trin flashing doesnt smooth like be4. Always gave me error 0018003 update fail on the halfway, i guess because i have bad nand on trin and probably cuz cooked rom.
Can u give me another link, perhaps on xda ftp. rapids so slow 4 me. Btw i have download dopodasiawwe official rom on xda ftp *twice but still when i tried to run the package it gave me corrupt archive integrity fail w!f.
Thanks gsmhackerns, i downloading the package now!
Perhaps you can find a way to make a goldcard for Trinity?
See http://forum.xda-developers.com/showthread.php?t=437996
That's what i looking for! Thanks.
Humm, superb. Yay, great! Thank you stepw. Even its for elf with a little mod i hope this will work. Once again thank you.
Stepw, i have tried making the gold card, everything went ok. I have temp. cid *supercid* but the probs now is i can't download http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.execan someone uploaded to somewhere else. Rapidshare crap! perhaps on xda ftp.
thanks!
goldcard cannot help in such a situation.
I can however make an SSPL that loads off SD card - just like for kaiser you will be able to use it because you are already on hardspl.
then that will allow you to flash stock SPL.
PM me and send your MSN address, so we can test it out. if it works i'll post it in this thread too in case others get stuck also
cmonex said:
goldcard cannot help in such a situation.
I can however make an SSPL that loads off SD card - just like for kaiser you will be able to use it because you are already on hardspl.
then that will allow you to flash stock SPL.
PM me and send your MSN address, so we can test it out. if it works i'll post it in this thread too in case others get stuck also
Click to expand...
Click to collapse
Indeed. Youre right cmonex, it doesnt make any difference at all 4 my trin. After several tried using and making goldcard 4 trin, finally i made working goldcard4trin, but gosh it still stuck when i tried to update the os (update os fail) humm anyone.
Sorry for wasting your time with Goldcard, I have overlooked that you have a hard spl on your Trinity. In this case goldcard doesn't make a lot of difference.
And there's no trindiag.nb to the best of my knowledge that could be used instead of SSPL cmonex is suggesting to run from SD.
Back to the topic, sounds like you have some "bad" blocks in flash and OS can't be flashed. Bad blocks can be reset with "task 2a" command, see this thread for more details:
http://forum.xda-developers.com/showthread.php?t=330496
The question is how to run it without USB and I don't have an answer for you
Some people have previously mentioned they managed to flash smaller OS images when larger images failed, perhaps if you try flashing some minimal vanilla ROM, it will succeed?
Bad NAND, Yup!
Ya... as i mention before yup i do have bad nand block on my devices. Using manila rom with smaller img size the flash went 'OK'. But it doesn't boot at all infact just black screen with green led on.
Okay the only solution probably use mtty and do task 2a if i'm not mistaken. But like you said "The problem is the USB port". I think the port is ok cuz i already tested it connecting my usb to my trin without inserting the battery and the red led *magenta* is on. humm, weird!
But if something can make it working without involving any pc connection it would be a great achievement. hahah! well i supposed i have to put my trin on bunker before someone can make it happens
I asked SEA in my country and they recommend me to changed the machine it self and they charge me around US $160 ho...ho.. too "wideeeeee" for college boy like me
Same problem, i flashed the rom
RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship
and after that i tried to flash a new radio!
power+cam and the cell phone did not show usb, then i used sspl to rum the radio but it locked at 0%
after that it is stucked at bootloader screen
ipl 1.0
spl 3.20 .....
but no usb and no sd card !!
did i lost the cell phone?
there is no jtag ou something like that ?
so now... you still want this SSPL? i'm thinking of patching one up to automatically run task 2a maybe. or just restore stock spl for warranty service if that's what you have in mind. but you didn't really reply to that offer?
Please if you could build a sspl for this condition it would be enough because once sspl i can run a new ruu with hard-spl again ! the problem i believe was caused becaus this original rom's have a spl.nb inside , in the screen we read teh information about the olipro spl but i thing teh original spl.nb messed up the hard spl!
There is another problem, i formated to fat32 my card and put a TRINIMG.nbh of a rom inside and he did nothing!! same card in elf with ELFIMG.nbh of a rom runs great!!
It means that this spl of mine will not flash from card? goldcar would help?
and cant i flash something in serial ? like a jtag or something?
Anyhelp will be more than apreciated!
sorry the bad english
Needed!
Cmonex, sorry for longtime haven't seeing this thread again. okay i really need your help btw if you willing to help me. The spl your talking about perhaps can sort out the probs (i hope) at least we tried. as for task2a cmd to clear the bad nand block is none usefull for me since usb conn. are definitely drop dead.
how about patch the SSPL to do task2a cmd to solve the bad NAND block first.
dinizbruno said:
Please if you could build a sspl for this condition it would be enough because once sspl i can run a new ruu with hard-spl again ! the problem i believe was caused becaus this original rom's have a spl.nb inside , in the screen we read teh information about the olipro spl but i thing teh original spl.nb messed up the hard spl!
There is another problem, i formated to fat32 my card and put a TRINIMG.nbh of a rom inside and he did nothing!! same card in elf with ELFIMG.nbh of a rom runs great!!
It means that this spl of mine will not flash from card? goldcar would help?
and cant i flash something in serial ? like a jtag or something?
Anyhelp will be more than apreciated!
sorry the bad english
Click to expand...
Click to collapse
no usb, no sd, no chance sorry. jtag it or get it serviced or get another phone.
as for jtag, hermes jtag has been worked out by scholbert. trinity is probably the same, but you will have to find the pins. the rest of the process will be the same.
Dear all,
I can't go to bootloader screen ..fff before I had on my trinity faman 4.03 rom and I would change with the NiAX rom... after 3% restart and I think that my phone brick and my phone stay on htc screen fff please help
I have windows vista and even if i follow all steps pfff it changes nothing...after hard reset ...fff please help ...
I think my trinity is out :-(????????????????????????
Please help,
The O.S is more important to these operations than can be stressed - for a 99% safe flash Win XP is your best bet , I have had nothing but error 260,270 halfway flashed roms and usb faults running on vista and since I had my original bricking episode - NOTHING , I repeat NOTHING including genuine roms has flashed without a recovery or at least without doing something strange in the process - SPLXPLOIT has been a saviour here , without it I would've been lost.
Cant the O.P simply use another machine to test out the USB theory ?
ALIVE AGAINnnnnnnnnnnnn!!!!!!!!
My p3600 was stucked att bootloader, and wont give "usb" and do not read TINIMG.NBH (tried on elf with ELFIMG.nbh and the card was great)!
I did a golcard with the post on elf about it and the cell with the gold card inside was the same, no trinimg.nbh and no usb.............
BUT..............
with the goldcard inside, turned OFF, i placed it on the usb cable off the pc and the device booted to the bootloader screen, but this time he got "USB" , before flashing anything i removed the card , and putted switched off in the usb, booted with "serial" with card and pressing power and then placing usb still "serial" message!
I putted the card, did not switched on , placed on the usb and waited for it to boot for it self , and for my surprise "usb".
Flashed stock rom, and it booted nice!!!
Please try!
saved my day!
sidekraouf95 said:
Dear all,
I can't go to bootloader screen ..fff before I had on my trinity faman 4.03 rom and I would change with the NiAX rom... after 3% restart and I think that my phone brick and my phone stay on htc screen fff please help
I have windows vista and even if i follow all steps pfff it changes nothing...after hard reset ...fff please help ...
I think my trinity is out :-(????????????????????????
Please help,
Click to expand...
Click to collapse
I have to know how to repair my phone please... nobody can explain precisely how to put my phone on bootloader using my sd card directly from my computer under vista...???
Hey guys, i've just upgraded from 2003SE to Hermi WM6 ROM, but i messed something up with the ExtRom cabs (before i read the post on ExtRom) as mine now has no ExtROM
anyway, I want to either reinstall/flash this WM6 Rom again, or another...
how do i do this, with the Wizard it is completely different, and there is a guide in the wiki which is lacking here.
So can someone please tell me to flash OVER my current wm6 rom what steps to take?
thankyou kindly.
first of all, there is no point in flashing the exact same rom, if your device still works. you could simply do a hard reset.
but how did you screw up the extrom, do you mean, you forgot to resize it before flashing?
how much memory do you have?
start->settings->system->memory, then the top left number, storage total
assuming it is, like, 43mb, anything less than 60mb, you really have done something wrong. in that case you need to go back to wm2003, then resize the memory and then flash the new rom.
here is the manual on how to downgrade to wm2003:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
and then here is the manual on how to resize the storage and then upgrade properly:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
thanks chef,.. no i have the correct 60mb memory, but I did not understand what to do with cab1, cab2 etc,,, well i found a thread but now i lost it.. doh!
but thanks, hopefully i can find it again so i can install the add-on cabs correctly
LucaToo said:
Anyway to reset the card without losing everything on it (if I can read it from PC which also died yesterday abd will only boot in safe mode - not a good day for hardware in my house)..?
Click to expand...
Click to collapse
Assuming the card is readable in the PC, you can try using win32diskimager to make a backup image to a file. Then try to burn that to a new card and see if that works. That is the only thing I can think of. Your /data for the hybrid should still be intact on emmc.
Sent from my Nook HD+ running CM10 on Hybrid SD
I have read about 10 pages of charging and syncing problems but they weren't like mine. I flashed hardspl 3.34 and then it all went bad. When it is turned on it wont charge from wall/car/usb. When I put it into bootloader, it seems like my computer recognizes it (it asks me if I want to safely remove hardware) but windows mobile device center doesn't say it's connected, nor does it show up in computer. I did a hard reset and all that. It still has original 6.1 rom. Should I flash another spl? Or another rom? Any suggestions? I really hope I didn't f up my tilt. I finally got it after I bricked my wizard a year ago.
thedon809 said:
I have read about 10 pages of charging and syncing problems but they weren't like mine. I flashed hardspl 3.34 and then it all went bad. When it is turned on it wont charge from wall/car/usb. When I put it into bootloader, it seems like my computer recognizes it (it asks me if I want to safely remove hardware) but windows mobile device center doesn't say it's connected, nor does it show up in computer. I did a hard reset and all that. It still has original 6.1 rom. Should I flash another spl? Or another rom? Any suggestions? I really hope I didn't f up my tilt. I finally got it after I bricked my wizard a year ago.
Click to expand...
Click to collapse
Well, if you are in bootloader and you got the USB sign on it you are ok. Try to flash another rom or reflash your stock rom.
Yes bootloader seems to work and says usb. I think what I did was flashed hardspl 3.29 following the directions in the "flashing your first kaiser rom" thread. But when I flashed 3.34, I flashed it using usb and not an sd card like it said. I just want to go back to original spl and rom.
thedon809 said:
Yes bootloader seems to work and says usb. I think what I did was flashed hardspl 3.29 following the directions in the "flashing your first kaiser rom" thread. But when I flashed 3.34, I flashed it using usb and not an sd card like it said. I just want to go back to original spl and rom.
Click to expand...
Click to collapse
Just look here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Hope that helps
I flashed that rom and it still does the same thing.
thedon809 said:
I flashed that rom and it still does the same thing.
Click to expand...
Click to collapse
Let's try this one my friend http://forum.xda-developers.com/showthread.php?t=335568 probably you can revert back to the original spl and stock rom
What about these steps?
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
I can't do them because my phone won't sync to my computer.
thedon809 said:
I think what I did was
Click to expand...
Click to collapse
That bit made me shiver.
stuntdouble said:
That bit made me shiver.
Click to expand...
Click to collapse
lol, I know that's exactly what I did. I was just saying, that I think that has something to do with it not charging and syncing. I'm not sure though, because I'm not a pro at flashing and all that. I can rebuild an engine, but I can't flash a stupid rom on a phone . Whatever I have to do to fix it, will have to work the next time because I only have about 60% battery left.
thedon809 said:
What about these steps?
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
I can't do them because my phone won't sync to my computer.
Click to expand...
Click to collapse
Anyone have any suggestions on what to do about this? Will using my sd card work? Sorry about the noob questions. I know what it's like helping noobs that have no clue what they are doing.
thedon809 said:
Anyone have any suggestions on what to do about this? Will using my sd card work? Sorry about the noob questions. I know what it's like helping noobs that have no clue what they are doing.
Click to expand...
Click to collapse
You can upgrade SPL via SD but you will need a WM donor phone (spare) or a card reader to format the sd card. Try that and let us know if that worked
gmaniac2008 said:
You can upgrade SPL via SD but you will need a WM donor phone (spare) or a card reader to format the sd card. Try that and let us know if that worked
Click to expand...
Click to collapse
My hp laptop conveniently has an sd card reader.
Ok, to install from sd card, I put stock att hardspl RUU_signed.nbh and KAISDIAG.NBH into sd card, pop it in and go to bootloader? Correct?
thedon809 said:
Ok, to install from sd card, I put stock att hardspl RUU_signed.nbh and KAISDIAG.NBH into sd card, pop it in and go to bootloader? Correct?
Click to expand...
Click to collapse
Follow the instructions of how to flash via sd card from here: http://forum.xda-developers.com/showpost.php?p=2741200&postcount=1
Do I have to change the name of the att hardspl to KAISIMG.NBH?
thedon809 said:
Do I have to change the name of the att hardspl to KAISIMG.NBH?
Click to expand...
Click to collapse
No.
(message too short so adding more letters to post comment.......)