I Installed WM05 for my BA but when any one call me my phone start ringing after the 5th ring is there any solution for this problim
Thunder said:
I Installed WM05 for my BA but when any one call me my phone start ringing after the 5th ring is there any solution for this problim
Click to expand...
Click to collapse
Mine starts after the 2nd. I think is a redraw problem. All the programs on this platform have the same issue (i.e. slow redraws) even the after the glyphcache workaround.. :?
arieltools said:
Thunder said:
I Installed WM05 for my BA but when any one call me my phone start ringing after the 5th ring is there any solution for this problim
Click to expand...
Click to collapse
Mine starts after the 2nd. I think is a redraw problem. All the programs on this platform have the same issue (i.e. slow redraws) even the after the glyphcache workaround.. :?
Click to expand...
Click to collapse
My phone starts ringing after 4-5 rings even though the screen shows that there's an incoming call. But it vibrates at the 1st ring if vibrate is enabled.
Yup, I think is a redraw problem. Furthermore, if your ring tone is a mp3 with some formart hard to decode, i guess (only guess) it will add more delay.
[quote="kli
My phone starts ringing after 4-5 rings even though the screen shows that there's an incoming call. But it vibrates at the 1st ring if vibrate is enabled. [/quote]
The WiFi fix made my phone ring with a delay. Try without it.
Mastiff said:
The WiFi fix made my phone ring with a delay. Try without it.
Click to expand...
Click to collapse
Mine rings after two rings as well.. on IVAN rom with RAMDISK.
ANY SOLLUTION YET.
I was complaining same problem ,now I removed D3d driver and smartf -ilter now it rings on the second ringtone
It's an old bug that seems to appear in all the 1.5 versions. Make sure you stick to WAV ringtones and avoid MP3's, which should help keep it to a couple of rings delay.
Read this thread
http://forum.xda-developers.com/viewtopic.php?t=42674
It's solved.
Related
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
I have a Tilt, I unlocked and changed the radio and also the rom.
The Rom version is 3.29.707.0 WME
Radio version 1.65.20.29
Protocol 25.88.40.04H
The rom is L26_Kaiser_Diamond_V5_3.29.707_HB
All works, I can make calls, photo, 3g. But when someone calls me the telephone doesn't ring or vibrate. On the screen it tells me that someone is calling but no noice o vibration.
But when I go to Noice and notification and I play the sound the telephone rings and vibrates.
Ring type: Vibrate and ring
Ringtone Ring-Innovation.
What can I do to solve this problem? Thanks!
A. flash a new ROM. This is a common bug in that ROM.
B. Read the thread about L26 instead of wasting a new thread.
C. Post this question in the thread about this ROM?
D. Don't flash any more ROM's until you appreciate reading.
mercadocel said:
I have a Tilt, I unlocked and changed the radio and also the rom.
The Rom version is 3.29.707.0 WME
Radio version 1.65.20.29
Protocol 25.88.40.04H
The rom is L26_Kaiser_Diamond_V5_3.29.707_HB
All works, I can make calls, photo, 3g. But when someone calls me the telephone doesn't ring or vibrate. On the screen it tells me that someone is calling but no noice o vibration.
But when I go to Noice and notification and I play the sound the telephone rings and vibrates.
Ring type: Vibrate and ring
Ringtone Ring-Innovation.
What can I do to solve this problem? Thanks!
Click to expand...
Click to collapse
Is the phone volume turned up?
I turned it completely down and sounds will still play through the notifications settings.
SouthernLuke said:
Is the phone volume turned up?
I turned it completely down and sounds will still play through the notifications settings.
Click to expand...
Click to collapse
Yes is completely turned up, the most strenght noice and doesn't vibrate and no noice =(
What rom it good?
mercadocel said:
Yes is completely turned up, the most strenght noice and doesn't vibrate and no noice =(
What rom it good?
Click to expand...
Click to collapse
every rom is good...just depends which one u like more so go and start testing
bapssystupr3m3 said:
every rom is good...just depends which one u like more so go and start testing
Click to expand...
Click to collapse
Thanks for your answer! I am flashing with Dutty's Diamond V1 Build 19588
When it finish i tell you the news =)
Thanks!
I have came across the problem before (once or twice a week), for some odd reason some times when I have used my bluetooth headset it will try to send all sound (music, tones, rings) to my bluetooth headset and the only way I have found to fix this is a soft reboot, turning off the bluetooth on the phone doesn't help.
SOLVED!
Dutty's Diamond V1 Build 19588
I had this same issue with v2 v3 and now in v5 of the l26 roms. It would not ring, but the phone had sound.
What I did to fix it was go to Start->Settings-> Sounds and Notifications and change the Incomming ringtone to another tone. What was strange is if I changed it back to the defaulted ring tone it wouldn't work again.
When I tried changing the ring tone from with in start>settings>phone it wouldn't work it had to be from Start->Settings-> Sounds and Notifications.
Did your phone have any sound?
I have the same issue. Have sound for everything but the ringing. Vibration works, visual notificatoin of incoming call is there but not the ring. I tried several ring tones both in settings->phone and setting->sounds and notifications, as suggested by arlop, didn't work. I have the stock ROM and radio. I did install a few 3rd party apps, and deleted them one by one with soft resets in between to find the culprit , but even without any it doesn't ring. Next step: hard reset, memory wipe. Then: Get phone replaced.
I am assuming y'all noticed that the L26 ROMs had the ringtones removed, right?
No ringtone, no sound.
I have a serious problem with my new diamond....
When I get an incoming call, I often miss the call because the phone is really slow to ring/vibrate...
I can see that at least for two of callers rings before it rings/vibrates on my end, the touch pad lights up/flashes. But unless you are physically watching your phone all the time, you have no chance to react in time..
Especially becase the lag-of-death os (wm6) takes eternity to figure out that Im actually frantically pressing 'answer call'
Is there some sort of registry hack for this?
Disabling the phone skin helps (download Schap's Advanced Config) and gives you back about 10Mb of memory. Also, some people say that moving from a .wav ringtone to an mp3 helps. I've not tried the latter but it certainly helped on previous PPCs.
Don't have any suggestions for your problem, but I do have a question of my own:
Who hangs up after 2 rings!?!
Who designs a phone that doesn't ring the first three times and then starts ringing? What's the point?
aydc said:
Who designs a phone that doesn't ring the first three times and then starts ringing? What's the point?
Click to expand...
Click to collapse
And the answer to that would be - HTC
BTW just a suggestion, if it might help ...
You can set alerts for missed calls - Start - Settings - Sounds and Notifications.
So.. in case someone does give you a missed call (one or two rings and then disconnects) - you will be notified with a sound. As opposed to pulling the phone out of your pocket - after 30 minutes and then noticing that you have a few missed calls from people who disconnected after 2 rings
Hope this helps.
the thing is that when the phone starts ringing, I need to react... it does actually happen that it is not in my hand, but on the table somewhere etc..
then by the time it rings the second time I get to it, and press answer.. wm6 then takes 2 years to figure out that the moron holding the phone has actually pressed te button..
by then its up to at least 5 rings on the other end... then a lot of people hang up...
what I would like was to tweak the phone to ring immedeately instead of the initial blinking for two rings...
yea someone do help out in this aspect please...
i for one have free incoming call.. so its pretty wasteful to call back a missed call when actually i could have answered it fast enough..
and im using a mp3 ringtone.. din see much improvement..
As told before: seems the diamond dialer interface is causing most of the pain. disabling it makes it respond faster.
but maybe...
someone made a custom VGA version of our Diamond dialer skin: http://forum.xda-developers.com/showpost.php?p=2365614&postcount=16
perhaps if we install this we get our Diamond skin back but without delay (???). it's worth a try, I will try it later.
disadvantage: 5 Mb extra storage space consumed.
I just did some testing on my Diamond.
I have a .wav as ringtone, am using the new dailer interface and am not using TF3D.
The phone starts ringing after the caller hears the second ring on his end, not too bad is it?
Also, I noticed disabling the new dailer interface also disables the "flip the phone to mute" option?
yes its bad.. or not good enough...
did you notice that the ring on your diamond is in fact blinking for those two first rings?
So the phone knows someone is calling you, but delays the ringing?
It's really not that big a deal..
I mean.. so it rings a few seconds later... I mean.. err.. compare that to.. NOT BEEPING AT ALL when you receive an SMS (thanks for the tweak) or an EMAIL (hoping to find a tweak)..
Yeah, it's a problem.. just not that big a problem.
you can setup notifications in the advanced section of the sounds menu.
and even if you couldnt I dont see how one flaw should excuse another?!
kurgandk said:
you can setup notifications in the advanced section of the sounds menu.
and even if you couldnt I dont see how one flaw should excuse another?!
Click to expand...
Click to collapse
Mate, you SERIOUSLY think that there were tonns of people who DIDN'T think of setting up the Sounds and Notifications Menu!!
Needed a registry tweak (for the SMS) and as far as I know, some are still having a problem with the Email (auto retrieval) - notification.
More importantly, nobody is saying that the delayed ring IS NOT A FLAW..
I just said.. a few seconds delay is not THAT big a deal. It's not a matter of EXCUSE one FLAW by looking at the other. Definitely not. A problem is a problem. I was just highlighting that a few seconds delay in notification is not THAT BAD as opposed to not being notified (by a sound) AT ALL
L o r d R a j said:
Mate, you SERIOUSLY think that there were tonns of people who DIDN'T think of setting up the Sounds and Notifications Menu!!
Needed a registry tweak (for the SMS) and as far as I know, some are still having a problem with the Email (auto retrieval) - notification.
Click to expand...
Click to collapse
hmm what can I say it works here, ive setup a sound, that pings when theres new mail, and then a little later it vibrates...
More importantly, nobody is saying that the delayed ring IS NOT A FLAW..
I just said.. a few seconds delay is not THAT big a deal. It's not a matter of EXCUSE one FLAW by looking at the other. Definitely not. A problem is a problem. I was just highlighting that a few seconds delay in notification is not THAT BAD as opposed to not being notified (by a sound) AT ALL
Click to expand...
Click to collapse
well for me its bad, and theres plenty of other people that feel likewise..
I agree it is bad and would also like a solution.
Most people who ring me get two rings before my phone even plays the MP3 and 2 rings later the answer phone kicks in.
It would be nice if the MP3 played as soon as the LED flashed like it should..
kurgandk said:
hmm what can I say it works here, ive setup a sound, that pings when theres new mail, and then a little later it vibrates...
Click to expand...
Click to collapse
Well Good for you.
kurgandk said:
well for me its bad, and theres plenty of other people that feel likewise..
Click to expand...
Click to collapse
**** happens. All the best.
RSkillz said:
I just did some testing on my Diamond.
I have a .wav as ringtone, am using the new dailer interface and am not using TF3D.
The phone starts ringing after the caller hears the second ring on his end, not too bad is it?
Also, I noticed disabling the new dailer interface also disables the "flip the phone to mute" option?
Click to expand...
Click to collapse
what do you mean with " new dialer interface", the white Diamond interface that comes with the diamond ROMs or the cab file I referred to?
pietrucci said:
what do you mean with " new dialer interface", the white Diamond interface that comes with the diamond ROMs or the cab file I referred to?
Click to expand...
Click to collapse
I mean the default dailer interface m8. I'm calling it the 'new dailer' because the tweak set you back to the old one (default WM6.1).
Sorry for confusion
Ok you guys and dolls with the slow response: what ROM are you using?
I use the 1.93 (from Walshieau) en did the test many times today with the diamond dialer active. Result: the moment the phone goes over my Diamond responds. Exactly at the same time!
I did it with the device on, device off, waited 10 minutes, all the same result: immediate answer.
Are there any guys who use 1.93 and experience the delay or am I the only lucky bastard?
BTW: I use radio 1.00.25.05
I have one problem with my Diamond, I'm living in sweden and our oparator is tele2 which let the phone ringing just 4 times at the incomming call then going to answer machine, the problem is the HTC touch Diamond start to ring at the 3rd one, means just have two incomming ring , I have lots of missed call per a day, How can I solve this problem plz.
In the option menu, when your are one the page with number to call, there is a few of possibility:
vibrate in first, then ring (your case)
vibrate AND ring
...
Select vibrate and ring, your diamond will ring immediatelly at the first ring...
Excuse my english, i'm french...
[email protected] said:
In the option menu, when your are one the page with number to call, there is a few of possibility:
vibrate in first, then ring (your case)
vibrate AND ring
...
Select vibrate and ring, your diamond will ring immediatelly at the first ring...
Excuse my english, i'm french...
Click to expand...
Click to collapse
Not on my XDA Ignito; Even if vibrate and ring is set the lights flash for at least 2 incoming rings before the phone rings and vibrates
Ringing problem!
I have one problem with my Diamond, I'm living in sweden and our oparator is tele2 which let the phone ringing just 4 times at the incomming call then going to answer machine
Click to expand...
Click to collapse
If that is an operator setting maybe it's possible to change it in your operators' voice mailbox settings?
Thank you for your reply, I ve gott another mobile phone SE and it getting the incoming call with the first ringing, but with the diamond it is ringing after 2 incoming signal? I think there is a problem with the setting or some thing else but cann't get it back...any one can help its appreciated.
Its not from the operator and neither from signal setting.
Many have had same problem, i think there is a thread about this some where. I solved it by increasing the amount of time before my voicemail picked up (need to talk with your phone company about that) and using a .wav ringtone format. Sorry no "easy" fix
Thanks Hippo-DK , how can I find that thread? I'm in need to get this broblem solved, how can I do mailbox? or what?
He's right in the fact that you have to contact your cellular provider to increase the rings before going to voicemail, but you can't keep it from waiting 2 rings before actually ringing. It's a problem that no one has found a direct solution for.
Hi,
Good day, I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Thanks a lot.
Hi,
Also, I remembered something I want my mobile to vibrate then ring but I think it's not doing this with all contacts sometime it's ring sometime it "vibrate then ring"
How can I solve this ?
Desigen said:
I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
Click to expand...
Click to collapse
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
Click to expand...
Click to collapse
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
Click to expand...
Click to collapse
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Click to expand...
Click to collapse
If you're expecting to receive calls through it all the time then you need to have the TyTN IIs bluetooth enabled all the time, how else is it going to communicate with the phone otherwise? To anticipate your next question, yes that uses lots of battery power so you may need a spare battery or two when you're out and about handsfree (or you could just use the wired headset that came with the phone for no additional battery drain).
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Flying Kiwi said:
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
Click to expand...
Click to collapse
Hi, when I want to reject the call I mute the phone by using the wheel button then press the red button "reject button" or touch the screen on "reject" word. None of the above work. They all failed. The phone not ringing but the call doesn't end. This happen from time to time. Not always.
Flying Kiwi said:
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
Click to expand...
Click to collapse
Yes, my ROM is WWE and I installed FJE application and I want the default input method to be Keyboard.
Flying Kiwi said:
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
Click to expand...
Click to collapse
No problem, I attach the two error I get
Flying Kiwi said:
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Click to expand...
Click to collapse
I don't have any contact with special ringtone, all my contacts are Outlook.
Regards,