I have a Tilt, I unlocked and changed the radio and also the rom.
The Rom version is 3.29.707.0 WME
Radio version 1.65.20.29
Protocol 25.88.40.04H
The rom is L26_Kaiser_Diamond_V5_3.29.707_HB
All works, I can make calls, photo, 3g. But when someone calls me the telephone doesn't ring or vibrate. On the screen it tells me that someone is calling but no noice o vibration.
But when I go to Noice and notification and I play the sound the telephone rings and vibrates.
Ring type: Vibrate and ring
Ringtone Ring-Innovation.
What can I do to solve this problem? Thanks!
A. flash a new ROM. This is a common bug in that ROM.
B. Read the thread about L26 instead of wasting a new thread.
C. Post this question in the thread about this ROM?
D. Don't flash any more ROM's until you appreciate reading.
mercadocel said:
I have a Tilt, I unlocked and changed the radio and also the rom.
The Rom version is 3.29.707.0 WME
Radio version 1.65.20.29
Protocol 25.88.40.04H
The rom is L26_Kaiser_Diamond_V5_3.29.707_HB
All works, I can make calls, photo, 3g. But when someone calls me the telephone doesn't ring or vibrate. On the screen it tells me that someone is calling but no noice o vibration.
But when I go to Noice and notification and I play the sound the telephone rings and vibrates.
Ring type: Vibrate and ring
Ringtone Ring-Innovation.
What can I do to solve this problem? Thanks!
Click to expand...
Click to collapse
Is the phone volume turned up?
I turned it completely down and sounds will still play through the notifications settings.
SouthernLuke said:
Is the phone volume turned up?
I turned it completely down and sounds will still play through the notifications settings.
Click to expand...
Click to collapse
Yes is completely turned up, the most strenght noice and doesn't vibrate and no noice =(
What rom it good?
mercadocel said:
Yes is completely turned up, the most strenght noice and doesn't vibrate and no noice =(
What rom it good?
Click to expand...
Click to collapse
every rom is good...just depends which one u like more so go and start testing
bapssystupr3m3 said:
every rom is good...just depends which one u like more so go and start testing
Click to expand...
Click to collapse
Thanks for your answer! I am flashing with Dutty's Diamond V1 Build 19588
When it finish i tell you the news =)
Thanks!
I have came across the problem before (once or twice a week), for some odd reason some times when I have used my bluetooth headset it will try to send all sound (music, tones, rings) to my bluetooth headset and the only way I have found to fix this is a soft reboot, turning off the bluetooth on the phone doesn't help.
SOLVED!
Dutty's Diamond V1 Build 19588
I had this same issue with v2 v3 and now in v5 of the l26 roms. It would not ring, but the phone had sound.
What I did to fix it was go to Start->Settings-> Sounds and Notifications and change the Incomming ringtone to another tone. What was strange is if I changed it back to the defaulted ring tone it wouldn't work again.
When I tried changing the ring tone from with in start>settings>phone it wouldn't work it had to be from Start->Settings-> Sounds and Notifications.
Did your phone have any sound?
I have the same issue. Have sound for everything but the ringing. Vibration works, visual notificatoin of incoming call is there but not the ring. I tried several ring tones both in settings->phone and setting->sounds and notifications, as suggested by arlop, didn't work. I have the stock ROM and radio. I did install a few 3rd party apps, and deleted them one by one with soft resets in between to find the culprit , but even without any it doesn't ring. Next step: hard reset, memory wipe. Then: Get phone replaced.
I am assuming y'all noticed that the L26 ROMs had the ringtones removed, right?
No ringtone, no sound.
Related
I Installed WM05 for my BA but when any one call me my phone start ringing after the 5th ring is there any solution for this problim
Thunder said:
I Installed WM05 for my BA but when any one call me my phone start ringing after the 5th ring is there any solution for this problim
Click to expand...
Click to collapse
Mine starts after the 2nd. I think is a redraw problem. All the programs on this platform have the same issue (i.e. slow redraws) even the after the glyphcache workaround.. :?
arieltools said:
Thunder said:
I Installed WM05 for my BA but when any one call me my phone start ringing after the 5th ring is there any solution for this problim
Click to expand...
Click to collapse
Mine starts after the 2nd. I think is a redraw problem. All the programs on this platform have the same issue (i.e. slow redraws) even the after the glyphcache workaround.. :?
Click to expand...
Click to collapse
My phone starts ringing after 4-5 rings even though the screen shows that there's an incoming call. But it vibrates at the 1st ring if vibrate is enabled.
Yup, I think is a redraw problem. Furthermore, if your ring tone is a mp3 with some formart hard to decode, i guess (only guess) it will add more delay.
[quote="kli
My phone starts ringing after 4-5 rings even though the screen shows that there's an incoming call. But it vibrates at the 1st ring if vibrate is enabled. [/quote]
The WiFi fix made my phone ring with a delay. Try without it.
Mastiff said:
The WiFi fix made my phone ring with a delay. Try without it.
Click to expand...
Click to collapse
Mine rings after two rings as well.. on IVAN rom with RAMDISK.
ANY SOLLUTION YET.
I was complaining same problem ,now I removed D3d driver and smartf -ilter now it rings on the second ringtone
It's an old bug that seems to appear in all the 1.5 versions. Make sure you stick to WAV ringtones and avoid MP3's, which should help keep it to a couple of rings delay.
Read this thread
http://forum.xda-developers.com/viewtopic.php?t=42674
It's solved.
Hello all,
I have noticed the following problem lately on my TyTN2 (original Norwegian ROM): After a while, the phone goes silent. It doesn't vibrate or ring when I receive messages and phone calls.
This seems to apply only to the ring/SMS tones. It plays sound files fine, and I am able to make a phone call.
Has anyone else experienced this? Any solution?
jahnotto said:
Hello all,
I have noticed the following problem lately on my TyTN2 (original Norwegian ROM): After a while, the phone goes silent. It doesn't vibrate or ring when I receive messages and phone calls.
This seems to apply only to the ring/SMS tones. It plays sound files fine, and I am able to make a phone call.
Has anyone else experienced this? Any solution?
Click to expand...
Click to collapse
Check that you didn't change the settings in the Sounds and Notifications settings menu.
Make sure that under the Sounds Tab the Programs box is checked along with the Notifications box.
I forgot to mention that after a soft reset, it's back to normal.
It seems like the settings aren't changed.
My phone has developed a strange problem whereby it no longer makes any audible tone when someone rings! If I set it to vibrate, it does indeed vibrate, but if its set to ring, its completely silent. The incoming call notification is displayed from S2U2, and I’ve tried changing the ringtone to ensure it wasn’t having difficulty finding the file, but it doesn’t seem to work. I’ve verified the volume is set to ring, but its still not working. Has anyone experienced this or able to suggest a possible fix?
6.1 stock att tilt
I have the same problem and really like some help towad this matter. see mines is a little different it rings,but it's low but once the call comes to the end of the call volume get loud like it should at the begening. i thinks the cause of this is the s2u2 on my tilt . everything works but incoming call is so low ,I do't know someone was calling until they hang up the volume comes back it's like s2u2 ver.136 muffes my ringtone untile the call end someone please take the time out and give alittle help over here plz asp.
I have the same problem too. I changed from ATT stock ROM to Garmin DK 1.2 ROM and then after a month, the phone stopped ringing for incoming calls. I upgraded the ROM to Garmin DK 2 and the problem temporarily vanished and then started again after about a month.
Does anyone know about this problem? For now, I am installing the HTC Kaiser ROM to test if that solves the problem.
random freezing
I've been having the similar issues with my tilt. It freezes and will vibrate when a call comes, but no sound and it won't stop vibrating until i soft reset. It does it randomly and sometimes it freezes before the number can be displayed so it is shown as an unknown number and i don't know who's calling because after the phone restarts the last call is not in the history. I have a few programs installed like skyfire, tcpmp, s2p, and i use my bluetooth headset at almost all times and i still can't answer with the headset on. I also have the HTC home plugin installed but it came with the windows mobile 6.1 update.
idea
Hya,
I had the same problem with my Niki and it intercame even with the Kaiser.
On Niki the problem was on WM6.0 .. after I upgraded no problem came. The "vibration freeze" never happened again and it's ringing every time.
On Kaiser the problem was in mirror. The ringing functioned well with WM6.0 and the problem came with the upgrade to WM6.1.
I can only think that the problem was that the ROM was broken but not sure.
An idea which I can gave to you to resolve a bit the problem is to install SPB phone suit where you can set ringtones to the calls, SMS, MMS and e-mails (and on newer versions maybe to many other things). It worked on my Niki `till I didn't upgraded (I didn't try it on WM6.1).
Never tried on Kayser but it worked for sure on Hermes.
Just try it, you can be sure that you don't brake anything and SPB phone suite for me was a usefull prog. Friendly interface, easy use and VERY usefull.
Have luck
Hi!
I have got a peculiar porblem. Searched for someone with similar problem. Doesn'r seem to get one!
Whenever an incoming call is not answered in my touch viva, the volume of ringer increases automatically. If it is silent come to vibrate, if it is in vibrate then comes to Ringing mode. I cannot rely on silent mode anymore while in meetings.
I have Touch viva, Wm6.1 and few third party softwares installed but not anything related to sound or calling function related..
Please let me know if someone has already killed this bug!!
Regards and thanks!
Elmad.
i've never seen problem like this ... but anyway did ya try to see the settings of your sounds under start-settings-sounds there check the there ... or if didn't work try to flash ur rom again if u want 6.1 use the original from htc and if u want 6.5 there are alot of rom in the forum ... i use evolution as 6.5
elmad83 said:
Hi!
I have got a peculiar porblem. Searched for someone with similar problem. Doesn'r seem to get one!
Whenever an incoming call is not answered in my touch viva, the volume of ringer increases automatically. If it is silent come to vibrate, if it is in vibrate then comes to Ringing mode. I cannot rely on silent mode anymore while in meetings.
I have Touch viva, Wm6.1 and few third party softwares installed but not anything related to sound or calling function related..
Please let me know if someone has already killed this bug!!
Regards and thanks!
Elmad.
Click to expand...
Click to collapse
if uve installed SRS WOW HD,then u might have it as a problem.
Hi,
is it possible to mute the volume of the ringtone easily?
For example, on blackberry, your phone's ringing, you just press on button, it's not ringing anymore but the call is still pending for the personn calling you. So you'r just shutting it up for that one call
Do you know/think it's possible on Kaiser?
Thanks
D
yes it is a feature but i can't remember if it works on the stock/official WM6.0/WM6.1. so it might depend on which ROM you are using and which dialer it has. since you didn't specify which ROM you are using, i can't be sure of what i am suggesting to you.
i am SURE the following technique works on all the custom ROMs i have tried (and i have tried MANY!). on some of these custom ROMs, there was even a button on the incoming call screen to silence the ring.
the technique: when the phone is ringing, simply roll the jog wheel (on the left side of the device) and that should silence the ring for the current incoming call.
Hi,
thanks for answering!
My rom is la "WM6.5.5|101m|6.5 kernel|Full Roms By jjblaster3|upd 23529|translatable|16/Feb/2010" from this link: http://forum.xda-developers.com/showthread.php?t=567850
I just put it yesterday on my phone so i didn't have time to try what you suggested me.
I don't know if it will help you to tell me if the feature is on my new rom
yes i have used that ROM and it DOES support the feature. i think it will also provide a button on the incoming call screen to silence the ring in addition to the jog wheel method.
That's cool I'll try it soon, thanks