Hi,
is it possible to mute the volume of the ringtone easily?
For example, on blackberry, your phone's ringing, you just press on button, it's not ringing anymore but the call is still pending for the personn calling you. So you'r just shutting it up for that one call
Do you know/think it's possible on Kaiser?
Thanks
D
yes it is a feature but i can't remember if it works on the stock/official WM6.0/WM6.1. so it might depend on which ROM you are using and which dialer it has. since you didn't specify which ROM you are using, i can't be sure of what i am suggesting to you.
i am SURE the following technique works on all the custom ROMs i have tried (and i have tried MANY!). on some of these custom ROMs, there was even a button on the incoming call screen to silence the ring.
the technique: when the phone is ringing, simply roll the jog wheel (on the left side of the device) and that should silence the ring for the current incoming call.
Hi,
thanks for answering!
My rom is la "WM6.5.5|101m|6.5 kernel|Full Roms By jjblaster3|upd 23529|translatable|16/Feb/2010" from this link: http://forum.xda-developers.com/showthread.php?t=567850
I just put it yesterday on my phone so i didn't have time to try what you suggested me.
I don't know if it will help you to tell me if the feature is on my new rom
yes i have used that ROM and it DOES support the feature. i think it will also provide a button on the incoming call screen to silence the ring in addition to the jog wheel method.
That's cool I'll try it soon, thanks
Related
hi , when i call someone i got a very silent dial tone .
any one know how to raise the volume of the dial tone?
i have on original htc tytn 2 with original rom.
(soft reset is not helping)
thanx
kekelen said:
hi , when i call someone i got a very silent dial tone .
any one know how to raise the volume of the dial tone?
i have on original htc tytn 2 with original rom.
(soft reset is not helping)
thanx
Click to expand...
Click to collapse
Mobile phones don't have dial tones, unless you have a Jitterbug phone. You are hearing some other tone, or maybe the sound you are hearing is a byproduct of some part of the phone. For example, on the older model Motorola V3's the EL keypad backlight would emit a low volume tone when lit. Does your "dial tone" stop when the backlight dims or shuts off when in a call? If so then you are hearing the backlight. Most people can't hear it because it is above the range of normal human hearing.
If it is the backlight you are hearing you cannot increase the sound. It is what it is.
-Jay
props for knowledge of the jitterbug.
ChumleyEX said:
props for knowledge of the jitterbug.
Click to expand...
Click to collapse
Yeah, we really ragged on Jitterbug for that (and other things) in another forum I'm in when they first came out.
-Jay
i think i expressed my self wrong.
when i want to call someone and i press his number and then press the call button u should here a sound that the phone is ringing (on the other side).
and that ringing sound is very silent.
is there a way to increase the volume on the ringing sound.
kekelen said:
i think i expressed my self wrong.
when i want to call someone and i press his number and then press the call button u should here a sound that the phone is ringing (on the other side).
and that ringing sound is very silent.
is there a way to increase the volume on the ringing sound.
Click to expand...
Click to collapse
If turning the volume wheel does not do it then there is no way I know of.
-Jay
not just 'a bit silent' then?
no it is realy silent .jou can hear it but if you hold your phone 20-30cm from you ,you cant hear it .
also when putting it on speaker you cant hear it.(because then you are more than 30 cm from your phone.)
when the pickup the sound is fine and loud.
I have the same probleme with my blackstone and its very annoying. if there is some noise you cant heard dial tone when you call someone.
or any on screen buttons in the HTC dialer. anyone know how to get rid of it? its supppper annoying
A little more information would be helpful -
1. does this tone happen when you press a button while on a call?
2. if it does - does your other party hear it or only you?
3. what buttons does it happen on touch screen buttons or only the buttons on the front of the phone?
4. is this when you have speaker phone on or a headset or simply using the phone?
5. is it only when you hang up or any button at any time while on a call?
6. do the buttons make normal sounds when you are NOT on a call?
7. have you turned off sound on your buttons - have you at least tried this to see if it kills the problem?
Bill
when in the dialer go Menu->Options then Keypad: Off
ahh keypad tones off got rid of the annoying beep lol thanks! wish there was a way i keep the beep for the numeric keypad without the obnoxious beep that came out of the speakerphone part rather than the ear piece when backspace/ call history/ speed dial is pressed
jut realized it still makes the annoying noise when it connects to a call
i found that someone had my exact problem on a wings smartphone. they edited the registires in order to turn it off. i played arround with mine all day but no luck. here is the thread if anyone can apply it to a kaiser id be very greatful!
http://forum.xda-developers.com/showthread.php?t=356416
I love this bluetooth headset. I was in a really noisy resturant, my friend could not even hear the noise on the other end. This jawbone has some serious noise cancelling technologies. Then I went into the bathroom where the music was insanely loud (mexican mariachi stuff) and still friend couldn't hear any music at all.
Weird but cool.
But when I press the button on my headset to hang up a call, it tries to open up the voice recorder/voice calling app on the tytn2. Very annoying.
Do any of you know how turn off this feature? I just want to stop the call. Thanks.
All I can say is that it isn't normal behavior...sorry.
I see that behavior all the time with 2 Jawbones, push button to end call, the call ends but voice dialer opens. I just keep quiet and it cancels itself, very irritating I agree.
RemE said:
I see that behavior all the time with 2 Jawbones, push button to end call, the call ends but voice dialer opens. I just keep quiet and it cancels itself, very irritating I agree.
Click to expand...
Click to collapse
Never heard of that problem. MAybe its the dialer or even the rom ur using to cause this problem? Have u tried a different rom with ur bluetooth? Also try to install a different dialer and see if that helps. My jawbone works perfect on my att tilt!
deeznuts said:
Never heard of that problem. MAybe its the dialer or even the rom ur using to cause this problem? Have u tried a different rom with ur bluetooth? Also try to install a different dialer and see if that helps. My jawbone works perfect on my att tilt!
Click to expand...
Click to collapse
You using stock ROM or custom ROM?
this happens to mine as well. From what I've observed, it seem like a delay of some sort when you press the button to hang up, and then the call has already hung up on the other end, and instead of hanging up the call, the phone will just turn on the voice dialer.
it is almost certainly what fakts13 posted as a cause. I've never seen mine launch the voice recorder when hanging up from a call.
It is exactly what fakts13 said. A single button press on the Jawbone can answer or hang up a phone call, but it will also activate voice dialing if no phone call is active. The only problem that you are experiencing is that your other caller is hanging up before you, so there is no active call whenever you press the button on your Jawbone. Since there is no active call, the button press launches Voice Dial on your TyTN II. You could always disable Voice Dial altogether if you never use it.
HI guys! I have a little problem on my wings: when I'm already on a call and someone calls me, I don't recevive any acoustic alert; I mean, the screen shows me that there is another incoming call but if I have the phone at my ear I can't see the screen. Is there a way to make the phone ring or vibrate or anything else that tells me that there is another call??
THX
Settings=>Phone=>Call Waiting. Make sure "Provide call waiting notifications" is checked and then go into Settings=>Accessibility and change your In-call alert volume to increase the tone.
Thanks. I found out that I had changed too many keys in the registry
Hey folks any idea on this?
I've had my Diamond for just over 12 months until now ring tone has worked fine when i get an incoming call but now it's stopped working. I usually have it set to "vibrate then ring" but now it just vibrates, i've tried all the options including just plain and simple "ring" but to no avail. Interestingly when i preview it when i've made a change it plays the ring tone for incoming call fine so the speaker must be ok. I've also changed the ringtone played as well but has the same net result.
any thoughts welcome
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Viffer800 said:
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Click to expand...
Click to collapse
Spot on mate!! Many thanks for that as you say no idea how mine came to be on silent for Ring either. Thanks again