SOS.....BA Sms and Camera cannot start...Please help - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Recently after enabling the BT to run Gps on my BA(rom142).my camera and Sms mesaging cannot be activated..(I have to use a com port spp to enable my gps bluetooth.)..I tried many soft resets still the camera and sms messaging cannot be activated. I then uninstalled the Gps program, soft resets and still it does not function.I tried to start from windows directory for camera and it does not start either. I could not find messaging.exe in windows directory....What should I do short of a hard reset.... I installed the gps on my XDA2 however I did not have these problems as experienced on my XDA2s....Pls. HELP.....Many thanks in advance

Related

gps problem with 2 programs

I recently upgtraded my wizard to the clubimate 2.16.9.1 rom. Everything appears to be fine except one issue (ok two that battery is anoying ) at one point before and I dont know if it was with this rom or the stock tmobile rom from last december, but I had 2 programs accessing my gps without a problem. Now however I do not seem to be able to make that happen.
I have paired my bluetooth gps on com 6. I then went into the gps manager (which I enabled) and told it to use com8 for programs and com6 for the gps. Manage gps automatically is selected.
Any device that connects on the software port gets an error saying the port is not available. Any program that connects directly to the gps port works. Its as if the gps redirection stuff isnt actually working. If two programs try to use the same real port for the gps stuff they will fight each other and both lose data.
Has anyone else experienced this? Does anyone have a solution?
I am about out of ideas on this ...
Got exactly the same problem with TT5...
I have the same problem.
I have my Holux GPSlim236 attached via Bluetooth to COM6. WiFiFoFum2 sees it just fine on COM6, so I know the device is working and sending data to my Wizard...
Under the GPS icon on the Control Panel, I have set the hardware port to COM6, the program port to COM8, and the "Manage GPS automatically" box checked.
If I'm understanding right, all programs should then be able to talk to COM8 and get GPS data. I even soft-rebooted to make sure my settings were saved, but WiFiFoFum2 still cannot open COM8 at all!
I've been messing with this all night to no avail.
rreinink and trixter, what GPS unit are you using? I wonder if it's a problem with the GPSlim? Though I don't see how, as it works fine directly, just not through WM5.0's GPS Intermediate Driver layer. Is it maybe a bug with GPSID?
-Pete
I had a similar problem with my Atom and couldn't get the GPS to connect properly when running Destinator. The best solution that I have found so far is a program called GPS Gate - it basically does what the WM5 GPS Manager SHOULD do, except GPS Gate actually works (at least it has for me - I have had no problems using my PPC with the bluetooth GPS and Destinator PN). You can download a trial version (and then purchase if you want to) at:
http://franson.com/gpsgate/download.asp?file=GpsGatePPC.zip&ok=1
Hope this helps.

Successful WM5 Rom Upgrade Tricks to share

Most of you would have upgraded successfully from WM 2003 rom to various WM5 rom. For me, I started using Helmi's 1.30 rom, 1.32 rom, 1.4 and 1.4 vanilla rom, Xplode AKU 3.3 and 3.5, and just on Tuesday, tried Helmi/Logout rom (I choose to call this rom as such as pointed out by Helmi, Logout had used more than 90% of his work).
All the roms are great, but each had given me some problems, due to the fact that I have many programs installed, nothing to blame Helmi, Xplode or Helmi/Logout. All the roms when freshly installed gave me very stable results, i.e. BT and Wifi on off. From Helmi's 1.4 rom, I got to enjoy A2DP. From Xplode's rom, I got to enjoy clean basic BA WM5 rom. From Helmi/Logout rom, A2DP and stable BT and Wifi on off.
This the experience that I want to share, and I hope you will find this useful.
For all the roms so far, what I did was to hard reset, flashed the rom, test that BT and Wifi can on and off, and start installing all my other apps one after another without soft reset, unless the app asks for it. Along the way, I will find that BT and/or Wifi will not start.
With Helmi/Logout rom, I did the same as above. After a number of apps installed, I experience again either BT and/or Wifi problems. Then something hit my mind! Why don't I do a soft reset after each app installation and after that, check for BT and Wifi power on and off. Guess what, I managed to install majority of the apps to my BA and BT and Wifi still powers on without problem. Here's a list of apps I have:
1. PocketZen Phone
2. Pocket Dashboard
3. GPSGate
4. Mapking 7
5. Garmin Que
6. Spb GPRS Monitor
7. Spb Time
8. Spb backup
9. Spb Imageer
10. Resco Explorer
11. Resco Audio Recorder
12. Virtual Pool Mobile
13. Bubble Buster
14. SKTools
15. XCPUScalar
16. GB-Soft Tweak
17. Tengo Thumb
18. Bejeweled
19. Ezdial
20. Lexisgoo English Dictionary
21. psShutXP
22. Styletap Launcher
23. MS VC 1.6
I still have a number of apps that I had not installed but with 23 in and still running fine with BT and Wifi, I'm very satisfied. So I suggest to those who complain about BT and Wifi problem, or any other problem, try what I had done, i.e. do a soft reset after installation of each app and share with others your success.
Hope all of you will find this useful.
Cheers and thanks to Helmi, Xplode and Logout.
Damn, noone figured that out before, that some apps may screw the settings!! :| Gotta do some tests...
So basically we should not bother with preparing an Ext Rom with all the programes we want, and instead Install and Soft Reset each one seperately?
I'll try it next time i flash my rom, thanks!
That was a good share zard!
WiFi now misses firing up in the helmi/logout ROM when it used to be working fine, unfortunately I didn't know which program I installed when it stopped working.
Just some thoughts, if somehow bluetooth/wifi registry settings gets screwed up after prog installation without soft reset, would it help if we change registry file type from hive to file-based? Registry changes gets written immediately each time with file-based, that is what I read somewhere.
Anyway, I really wouldn't mind doing 20+ soft resets just to get that 100% WIFI/BT powering up!
Thanks again!
Fast Battery Drain Problem found
dear all
we Really appricate your post since i have found AKU 3.5,rom 5.04.10wwe
with extend rom Logout 5.04.10 by helmi.
There is Serious issue i have found,Battery Drains in actual Usages for 8hrs.
but may be some fixes may resolve this issue I hope,This rom Very much Stable as i have not checked only WIFi but other applications and third party Softwares does work fine as till now.
after insatlling standarize2.cab and powermanagementpatch_116.cab still this problem not solved for me.
There is One Extreamly diffrent behavior found back light of BA auto swithon if phone is All Keys locked mode or not ,without touching Ba the lights does shows this behavior.May some people has used this rom found this Unique problem till now.
Other problem I found With MS voice Command 1.06 doesnt work with incoming call aleart<other features works perfectly like MENU- profile- music-and etc
I Am very much statsfied with this Rom The most Successful and Stable rom i found Atlast........Thanks to Helmi
Hi Zard
Hi Zard
Thanks for your information, it is very useful.
I am also running on Helmi's / Logout's rom.
I managed to install a lot of programs without affecting BT/WIFI.
I can turn both on / off without a problem. However, I have problem with BT, I can not have two BT devices connected at the same time. When I have my BT headset connected and I try to connect to my BT GPS receiver, it will not work!!
Do you have this problem or do you have a solution for this issue? I did not have this problem on Helmi's 1.4 rom (did not try vanilla though).
Thanks again.
rhmartin said:
That was a good share zard!
WiFi now misses firing up in the helmi/logout ROM when it used to be working fine, unfortunately I didn't know which program I installed when it stopped working.
Just some thoughts, if somehow bluetooth/wifi registry settings gets screwed up after prog installation without soft reset, would it help if we change registry file type from hive to file-based? Registry changes gets written immediately each time with file-based, that is what I read somewhere.
Anyway, I really wouldn't mind doing 20+ soft resets just to get that 100% WIFI/BT powering up!
Thanks again!
Click to expand...
Click to collapse
I don't know about what is the difference between registry file type of hive and file-based but whoever knows and can do something about it would be good. Though it was terrible to do so many resets and I guess its worth it after all.
creations_31 said:
dear all
we Really appricate your post since i have found AKU 3.5,rom 5.04.10wwe
with extend rom Logout 5.04.10 by helmi.
There is Serious issue i have found,Battery Drains in actual Usages for 8hrs.
but may be some fixes may resolve this issue I hope,This rom Very much Stable as i have not checked only WIFi but other applications and third party Softwares does work fine as till now.
after insatlling standarize2.cab and powermanagementpatch_116.cab still this problem not solved for me.
There is One Extreamly diffrent behavior found back light of BA auto swithon if phone is All Keys locked mode or not ,without touching Ba the lights does shows this behavior.May some people has used this rom found this Unique problem till now.
Other problem I found With MS voice Command 1.06 doesnt work with incoming call aleart<other features works perfectly like MENU- profile- music-and etc
I Am very much statsfied with this Rom The most Successful and Stable rom i found Atlast........Thanks to Helmi
Click to expand...
Click to collapse
I just tested MS VC 1.6 and the incoming call alert seems to work only when Notifications is set as 'Annouce notifications through device speaker or wired headset only'. Probably, the BT is still not perfect but still, I'm more than satisfied with the BT now since A2DP works for Media Player, Mapking 7, Garmin Que and even voice dial through Mic of BT headset and voice instructions from BT headset when you activate MS VC 1.6 through the hardware button. Voice dial won't work through BT headset if MS VC 1.6 is activated from BT headset. I'm using i-Tech Clip radio BT headset.
just yesterday, i had that same old problem of BT not turning on... after countless soft resets after either turning BT on comm manager or BT settings, it still wont turn on. wifi is ok, just the bt. so i gave up and went on my day without BT. and just now, after reading these latest posts, decided to test BT again. and it works fine again! no new app installed, nothing changed. it had also happened in the past. hmmmm got you all thinking again i wonder
how do u guys manage to install application in Helmi AKU 3.4 v1.4? Using EXE or CAB?
i just flahsed mine yesterday and when i try to install CAB...it seems that the application is NOT installed correctly..
Hi all,
can anyone let me know where i can find this rom (Helmi/Logout) and may be some installation instructions ?
Thanks in advance
Chris
have u checked thru the forum?
the link for logout rom is existed inside helmi v1.4 thread too.

GPS software freeze when set to the right port, help

i have a tilt along with 3 GPS software: miomap 3.3 oncourse navi6 and google maps. i updated to the latest rom, duttys wm6.1...and gps works
gps works great but now it doesnt work..com port is set to 4 and when i load the gps software, it loads..but when i set the com port within the software..whole phone freezes...i have to soft reset...
all software freezes at "starting..." during program startup
setting to a different com port..i can load the software..but setting the com port in the software freezes again..
i tried to back track...but i cant seem to find the problem besides hard resetting..
anyone have this issue? ..i even tried uninstalling googlemaps/miomap etc but still same issue..
thanks!
found the solution...i used gpstuner!
http://forum.xda-developers.com/archive/index.php/t-287257.html
maybe its googlemaps that messed up the settings, but i dont see any changes in the registry?
http://forum.xda-developers.com/showthread.php?t=360168

Gps dead

Hi to all
I had problem with "quickgps"
then i downloaded it and reinstalled it
after i didn't used my kaiser with gps programs for about a month
Today i have tried to use tom-tom and other gps program
but only result is that tom-tom and others program (igo,google map etc..)
don't find any gps , and message they say is
" no gps ! flight mode"
i tryed to soft reset , disconnect battery but nothing
internal gps like disappeared
I haven't installed any roms and i have only original when i bought it
i would appreciate any help
thank !
check your wireless manager. maybe you have flight mode selected,
your gps is not dead
its something to do with ur configration
either u r in flight mode as the warning message suggest
or
u have changed the port of gps connectivity
Gps still dead
Thank you for quick reply
i tried to check if flight-mode was on or not
then i checked
gps port config here is:
data port :com 4
hardport : none
acces : automatic checked
tom tom igo message is :"no gps device"
igo says :"gps not found"
in these days i never modified these values
i think i have to do a hard reset
i dont know what happened
Thank
You never want to use the GPS Settings applet in the control panel. It will break the GPS and require a hard reset to fix.
accursio1111 said:
i tried to check if flight-mode was on or not
Click to expand...
Click to collapse
What do you mean 'tried to' check? Either you checked comm manager or you didn't. Was it in flight mode or not? I'm sure your GPS hasn't died, it'll just be a configuration issue and if you've been fiddling with settings you needn't have fiddled with and changing them back doesn't work, as NotATreoFan mentions, a hard reset may be the simplest cure (along with caution next time).
I just wish full sized PCs had the simple option of performing a hard reset rather than having to do numerous reinstalls or even a system recovery using a supplied recovery CDROM or hidden partition. PPC users have it easy when it comes to rectifying software 'misconfigurations'.
I had a similar problem, and I flashed another radio than flahsed again to the one that gived me trouble...an bingo, GPS start working again )
GL

GPS doesn't work properly

Hello all,
My GPS was working just fine with several applications like GPSed, the 'new' experia camera with geotagging and so on. Recently I installed CoPilot Live 8 and now wm is not allocating the right port to be used for GPS. Sometimes it just activates my bluetooth. I reset my device to its manufacturer defaults, but still it's not very stable. I also opened a ticket with ALK (CoPilot) support, but I'm hoping that someone has a tip on how I can restore wm. If I let wm manage my GPS settings, most appliactions, do not get the GPS signals. Google maps seems actually be the only one still working, meaning my GPS is not physically broken.
Is there any way I can tweak wm6.1 again so that it will find the correct comport to use for the GPS?
Hope anyone can help as this is quite annoying.
Thanks in advance,
Dan.
There is setting for that. It's called External GPS.
You can set which comport will internal GPS use there too, it's the first page.
Also each GPS application should at least have settings for selection the com port. Some even support native WM api.
Thanks
Thanks for your reply.
I tried that and GPS should be working on com4, but still I got issues with some applications I didn't use to have (gps related).
I will try to seek if there is another com port wich will work fine for all app's.
I was hoping I could keep it as being 'managed' by wm.
Thanks again for your reply!
Dan.
I don't understand that well too .. anyway here is my theory.
Managed by windows may mean two things.
1) Special treatment of com port. Normally only one application can use one com port. And you sometimes want to use more apps form GPS at once. So this specially handles the com port of GPS so it is available multiple times. You can turn this on on third tab of the GPS settings app mentioned above.
2) Using WM driver for GPS, not com port. There is something like that, Google maps can use port or 'windows managed', also Garmin software has either com or 'GPS intermediate driver'. Anyway this is set on application side. When you use this, no com port matters. However if you use com port, it must be the same number as preset on GPS settings, standard is com 4.
There are also other problem with GPS. Try this app:
http://www.chartcross.co.uk/products/WM00002_details.asp
It's simple GPS tester. Try that first, it finds the port and baud-rate of com connected GPS.
Also sometimes GPS does not work in any program, and it can be fixed by forcing re-download of Quick GPS data. Once I had situation where GPS kept loosing signal every 5 seconds, and forced re-download fixed it. So the Quick GPS data can get somehow bad, and it may cause problems too.

Categories

Resources