Related
I purchased my HTC Touch Diamond few days ago and I have the following problems:
Item 1:
After testing several programs (Tomtom7, googlemaps, etc.) internal GPS has never work.
QuickGPS works ok (because in reality only uses the data connection).
The phone was originally with ROM 1.37.456.2, and I also tried with Elite 1.0 ROM. With both ROMs internal still do not work.
Any suggestion?
Item 2:
When I receive a call usually the "Answer" button is pressed in the case involuntarily. Thus the call is answered without knowing it.
Is there any way to minimize this problem?
Of course I appreciate any suggestions.
Ricardo from Uruguay.
Do you have A-GPS (Assisted GPS) enabled with AdvancedConfig ?
If so, disable it.
Very strange...
Can you give us your Radio version ?
Did change something ont the GPS settings ?
Please find the solution at my post
http://forum.xda-developers.com/showthread.php?t=408560
GPS doesn't work
I have Agps Disable.
I have already done many Hard Resets.
Now I am using "HTS GPS Tool". In the setting tab aI can see a lot of information coming, but Satellites used is 0.
Of course no other navigation software is working.
Do you recommend any other ROM?
Thanks in advace for any suggestion.
Ricardo.
I have the same problem
I have AGPS disable
The first time, i run my tomtom 6, it works very well, after i reboot my diamond, it doesnt work any more, i wait all the time for the signal GPS
I use the original ROM, but i dont think it is the ROM problem
This is a common problem.
Don't bother messing around with settings it wont work, just do a hard reset and the GPS should come back
PaulusUK said:
This is a common problem.
Don't bother messing around with settings it wont work, just do a hard reset and the GPS should come back
Click to expand...
Click to collapse
everybody do that ?
If your programs wont access GPS, and you get no GPS by altering the 'external GPS' to com port 4 (program) and Com 0 or 2 (hardware) and ticking the 'let windows manage GPS' box, then GPS will not appear unless you do a hard reset
PaulusUK said:
This is a common problem.
Don't bother messing around with settings it wont work, just do a hard reset and the GPS should come back
Click to expand...
Click to collapse
so, do u mean that, one time i do a soft reset, then a hard reset have to be done for GPS?
My Diamond once lost the ability to get any GPS signal, but this is how I fixed it...
1. Go to "externalGPS" then "Access" tab then Untick the checkbox then hit ok
2. Turn the device off
3. Turn it back on then tick the checkbox then hit ok
It should now find a signal (May take about 2 mins the first time)
I've spent hours reading every thread on here and other forums about GPS not working and changing every com port in gps manager, and nothing worked.
Its just so much quicker to do a hard reset.
Don't waste your time. If you can't get GPS back by changing the com port settings a couple of times, then don't mess with it all night. Do a hard reset and get on with your life
I had similar issues. Seemed to get solved for me by repeatedly selecting and uselecting the "Use GPS" in Google maps. Not sure if it's the same issue but it solved it in my case.
My gps stopped working, too. When I pleaded for help here, Akito gave me this solution:
"The HTC GPS tool is for download at http://rapidshare.com/files/84815853...C_GPS_TOOL.cab and it's discussed here http://forum.xda-developers.com/showthread.php?t=360477 .
In the first screenshot in that thread you can see a drop-down box which says "hot start". What I do is to first click the button "open"... then in the tab "sattelite" my problem gets confirmed (can't see any sattelite then). I go back to the first tab, I click the drop-down box, select "cold start", click Nav. Init. click the button close and immediatly open.... et voila, it works again. Sounds quite complicated, however once you've done it a 1st and 2nd time, it's a piece of cake lol"
It worked immediately. Try it - and you will send the kindest thoughts to Akito, too.
When I used HTC tool, the only port that could be opened was port 3 and 7. After opening either of these, when I pressed INIT, I got the response "Unable to Send NMEA command"
So there was definitely some problem with the GPS being "seen"
Hi everyone
I have spent a lots of hours searching for the answer to bad gps reception on diamond, through different forums.I was about to sell the diamond when I finally came with a solution and that is Hard Reset after each Rom flashing.
For a few days I could not get a gps fix, no matter what I did. I tried Quick gps, Gps tool , Google map, iGo8 and Garmin. Somewhere I read that it could be the Rom I am using. So today I flashed 4 different roms including Dutty's, bepe and panosha but no gps fix. Finally I did a Hard reset and viola, it found the satellites within 10 seconds inside near the window on all the different Gps softwares without any problem.
So here is the procedure:
***After a ROM flash finish the usual soft reset and stuff and then do a HARD RESET. Download the data through Quick Gps and your gps should work properly at its default settings.***
Actually I found that Diamond is faster than TYTNII for getting the Gps fix.
Now if the Cooks can find out what causes this behaviour so we do not have to do a hard reset after every new flash.
Please share the findings.
Cheers!!!
********* Ok I have been flashing all the new roms and Gps was not working even with the hard reset. Finally I flashed CT's Beta lite2 Rom, did a hard reset and viola Gps is working flawlessly for the last three days. This Rom is actually the fastest and very clean among all the other roms I tried ( no offence to all the other great Cooks ). Please try it and share your findings!
Well, now i know why i dun have GPS problems...
i hard-reset after each flash ... just a habit inherited while using artemis...
Hi, nice tip
When you had done a hard reset, is the GPS working fine after several reboot ?
It will be nice if someone on XDA or HTC find a solution
Yes its working fine since then and I have done several soft resets.
Fine here. The only thing that made the GPS not work for me was turning on A-GPS.
Doesn't work for me. I have changed my ROM to bElite 0.93, have done a hard reset, loaded quickgps data and still no fix after half an hour on the window.
Try going outside in the clear. If you get the fix then its the location of your window.
try using HTC GPS Tool, it fixed for me once:
http://forum.xda-developers.com/showthread.php?t=360477
install the cab, run it, then choose "Cold Start" let it run for awhile then try using your GPS software again.
Re: GPS Not Working
tararura said:
Hi everyone
I have spent a lots of hours searching for the answer to bad gps reception on diamond, through different forums.I was about to sell the diamond when I finally came with a solution and that is Hard Reset after each Rom flashing.
For a few days I could not get a gps fix, no matter what I did. I tried Quick gps, Gps tool , Google map, iGo8 and Garmin. Somewhere I read that it could be the Rom I am using. So today I flashed 4 different roms including Dutty's, bepe and panosha but no gps fix. Finally I did a Hard reset and viola, it found the satellites within 10 seconds inside near the window on all the different Gps softwares without any problem.
So here is the procedure:
***After a ROM flash finish the usual soft reset and stuff and then do a HARD RESET. Download the data through Quick Gps and your gps should work properly at its default settings.***
Actually I found that Diamond is faster than TYTNII for getting the Gps fix.
Now if the Cooks can find out what causes this behaviour so we do not have to do a hard reset after every new flash.
Please share the findings.
Cheers!!!
Click to expand...
Click to collapse
HI, ... Hard Reset,- you mean reformatting the internal storage as well? - i've done hard reset but still the gps can't fix location- says in HTC GPS tool - Mode 2: Not Fix
thanks
Mode 2: Not fix...
And the sattelites numbers show just #? Or u can see actual sattelite numbers?
Reason I'm asking is, if you just see #... then ur GPS is scr###d up and the cold start could really help.
If you do see the actual numbers, but no reception bars, then you have to get ourside into the clear sky. Be aware that nowadays windows are protective for keeping the heat of the sun outside. At the same time it keeps GPS for 95% out too.
akito said:
Mode 2: Not fix...
And the sattelites numbers show just #? Or u can see actual sattelite numbers?
Reason I'm asking is, if you just see #... then ur GPS is scr###d up and the cold start could really help.
If you do see the actual numbers, but no reception bars, then you have to get ourside into the clear sky. Be aware that nowadays windows are protective for keeping the heat of the sun outside. At the same time it keeps GPS for 95% out too.
Click to expand...
Click to collapse
Thanks akito- there's numbers-- as if it's a poor signal... same location in my window with the BT Gps receiver gives me 3D in Mode 2 almost instantly. - i'll keep trying. again thanks
You haven't been playing around with the GPS settings in the configuration of 'external GPS'? The standard settings are: GPS program port COM4 / Hardware port = none with a baud of 4800. Access tab should have GPS set to be managed automatically. Also, you have not enabled AGPS in any way like with a registry key or the advanced config program?
akito said:
You haven't been playing around with the GPS settings in the configuration of 'external GPS'? The standard settings are: GPS program port COM4 / Hardware port = none with a baud of 4800. Access tab should have GPS set to be managed automatically. Also, you have not enabled AGPS in any way like with a registry key or the advanced config program?
Click to expand...
Click to collapse
all is in default (Diamond Project Rom) as i just did a hard reset - a gps is disabled via advance config.
akito said:
Mode 2: Not fix...
And the sattelites numbers show just #? Or u can see actual sattelite numbers?
Reason I'm asking is, if you just see #... then ur GPS is scr###d up and the cold start could really help.
If you do see the actual numbers, but no reception bars, then you have to get ourside into the clear sky. Be aware that nowadays windows are protective for keeping the heat of the sun outside. At the same time it keeps GPS for 95% out too.
Click to expand...
Click to collapse
hi, nice tip
i have the same problem -> mode 2 : fix not vailble
I can see the satelite numbers, and there is some red in the reception bars (not for all, just 3), but wherever i run my navigation software (tomtom 6), why i cant get the signal GPS???? 20mins waiting, i think it is enough.
I had disabled AGPS
coca8888 said:
hi, nice tip
i have the same problem -> mode 2 : fix not vailble
I can see the satelite numbers, and there is some red in the reception bars (not for all, just 3), but wherever i run my navigation software (tomtom 6), why i cant get the signal GPS???? 20mins waiting, i think it is enough.
I had disabled AGPS
Click to expand...
Click to collapse
same probleme
solution for fix not vaible
the gps is broken ?
My problem is not the fix, but rather the lag and lack of precision while navigating...
I have more or less 5 seconds of lag, and the precision is awful...
If I use a BT external receiver connected to Diamond, than I don't have this problem...
It seems that the receiver is refreshing to less, or the communication between the receiver and the GPS software is too slow...
HastaSSSS
derkie said:
all is in default (Diamond Project Rom) as i just did a hard reset - a gps is disabled via advance config.
Click to expand...
Click to collapse
I've fixed my gps problem. I just tried to force change the gps port from settings>external gps from port 4 to port 6 and in my tomtom, i choose other receiver then tap port 6,was showing poor signal- i minimized tomtom, opened htc gps tool opened port 4 at 4800 cold start> gives me error message that the port is closed and it will force open nmea but still fail, in this part i tapped nav init.. then closed it- opened port 6 in cold start> showing all sat in #### instead of numbers. then closed it. then go to settings>external gps> then choose port 4, opened tomtom then went to gps configure and now change it to built in gps... i get full 3d 6 green bars indoor. all ok even after a hard reset. Thanks
Yeah...but how to solve the lag and accuracy issues...?...
HastaSSSS
s1rl4ncel0t said:
Yeah...but how to solve the lag and accuracy issues...?...
HastaSSSS
Click to expand...
Click to collapse
So far i dont have accuracy issue. i tried igo8 using bt receiver (SiRF III) compared it to the internal gps- it's just the same , internal gps loads even faster- In TomTom7- if i use bt receiver, some voice instructions is not complete unlike the internal gps which is flawless- maybe it's the rom/radio...
I don't have any problem
"Bonjour" (since I am french !!! )
I tried the GPS with TomTOM V7 = no problem
with garmin XT no pb
First idea
Within the programm window I have a "fast GPS" programme
Do you have this ?
Did you run it ?
Second idea
You should enable Agps in advanced config
On my diamond if I disable it doesn't work anymore
Third idea
Try to see if "GPS utilities" works
Google it it's a basic cab file for showing basic GPS (position, speed, elevation.... )
Let me know
Diamond FrencH Rom 1.37.406.1 FRE
Programs
google maps
live search
I've tried everything and I don't want to do a hard reset. Currently it won't let me use my gps, i tried download quick gps and that didnt change anything, I tried changing around the com ports, it just never worked since the start.
gps tool says
Fix not available for gnss dop and active satlaties
GPS fixed data says lattitude and longitude of a bunch of 0's
I see a bunch of red dots when I click on satelites? but it also says mode 2: fix not availible on the bottom of that screen
Try flashing the radio with the same version you use now. It's an effective way of resetting the GPS. Has worked for me before. Actually as late as yesterday
just tried the quadband radio update and it didn't work
adilkhan1214 said:
just tried the quadband radio update and it didn't work
Click to expand...
Click to collapse
Send it back for a new one.
Have you installed VOIP , that killed my gps?
I am also having the same problem, If i use the GPS tool or similar it can see 2 or 3 satalites but does not ever get a fix, really annoying!!!
Can anyone confirm for me if i should have assisted gps enabled or disabled (keep reading mixed info so i dont know if this works or not)
Many thanks
Paul
I had problems with the GPS too but now works great.
1) go outside !
2) disable A-GPS features ( Parameters -> Advanced GPS ), you can try to re-enable it later
3) let window Manage GPS ( Parameters -> GPS (third tab) -> check Let windows manage...)
4) launch HTC GPS Tool ( you will find links in the forum, search for this tool)
5) Open the right Port (as configured in Pameters -> GPS (first tab) )
6) Wait !!! ( for me it takes between 1 and 2 minutes to have a fix when outside )
k so i tried that, disabled a-gps, soft-booted device, checked settings in control panel (com 4, non, 4800, windows managed). Loaded gps tool stood outside and have 10 mins i can see the satalites but it is not locking or fixing my position. I also notice that on the satalite view i can see 5 red bars then they disappear for a few seconds then come back again, is this normal
Ok i never saw Red bars
only grey when no fix and blue when get a fix.
adilkhan1214 said:
Programs
google maps
live search
I've tried everything and I don't want to do a hard reset. Currently it won't let me use my gps, i tried download quick gps and that didnt change anything, I tried changing around the com ports, it just never worked since the start.
gps tool says
Fix not available for gnss dop and active satlaties
GPS fixed data says lattitude and longitude of a bunch of 0's
I see a bunch of red dots when I click on satelites? but it also says mode 2: fix not availible on the bottom of that screen
Click to expand...
Click to collapse
You have to hard reset your phone, believe me it's works after that. Some peeps had the same problem.
Yep, tried that too,, did hard reset this morning after reading that it works on another thread. Still nothing,
I am using TLR V3 Firmware and the 025 radio.
I am using the same radio as you though with elite 3.0. I haven't managed a fix yet, not with this or dutty's v2 with its included radio.
with the stock rom and 0.9 radio I could get a fix fine.
I had exactly the same problem as this on my kaiser. bloody annoying and not a problem I ever experiencd with my n95. perhaps it is something to do with nokia testing their products properly, who knows.
try this,
Advance your clock so that quickgps gets outdated, update quickgps
put back the clock to the correct time, quickgps will get outdated again, dont update quickgps, try to get a fix, will take sometime cause the GPS is cold booted now
then update quickgps after that
coding said:
I had problems with the GPS too but now works great.
1) go outside !
2) disable A-GPS features ( Parameters -> Advanced GPS ), you can try to re-enable it later
3) let window Manage GPS ( Parameters -> GPS (third tab) -> check Let windows manage...)
4) launch HTC GPS Tool ( you will find links in the forum, search for this tool)
5) Open the right Port (as configured in Pameters -> GPS (first tab) )
6) Wait !!! ( for me it takes between 1 and 2 minutes to have a fix when outside )
Click to expand...
Click to collapse
Where is this parameters and advanced gps tab?
Thanks for the advise i tried it but still nothing.
In GPS tool i can see lots of satlites but it will not get a fix and along the bottom of the screen i have about 5 red bars (i guess these are the satalites it is talking to)
this is getting really frustrating as i want to use this device as my sat nav, I will buy tomtom once i know it is working but i dont want to if it is going to be a waste of money
Paul
YAY I Got it Fixed
HI
Thanks again for everyone who has replied to help out with this. I have managed to find a fix.
I found this thread over at expansys
http://www.expansys.com/ft.aspx?k=100176
Installed the piece of software discussed in this thread, it looked at the gps and reported that it is acutally running at 9600 baud, the peice of software also picked up a fix in less than 30 seconds,
So i loaded up HTC GPS tool, set it to comm 4, 9600 and started in in hot start mode, stright away i get a fix.
Now i am really happy
Paul
adilkhan1214 said:
Programs
google maps
live search
I've tried everything and I don't want to do a hard reset. Currently it won't let me use my gps, i tried download quick gps and that didnt change anything, I tried changing around the com ports, it just never worked since the start.
gps tool says
Fix not available for gnss dop and active satlaties
GPS fixed data says lattitude and longitude of a bunch of 0's
I see a bunch of red dots when I click on satelites? but it also says mode 2: fix not availible on the bottom of that screen
Click to expand...
Click to collapse
you must try Radio 1.13.25.24...it can be fix your problem.1 week ago i get this error but when i flashed 1.13.25.24 the problem has solved here is the link:
http://www.mediafire.com/?tjmgzm0nz0y
alternative link:
http://www.megaupload.com/?d=USMNPAS1
i stongly suggest after flashing radio, make hard reset...
adilkhan1214 said:
Programs
google maps
live search
I've tried everything and I don't want to do a hard reset. Currently it won't let me use my gps, i tried download quick gps and that didnt change anything, I tried changing around the com ports, it just never worked since the start.
gps tool says
Fix not available for gnss dop and active satlaties
GPS fixed data says lattitude and longitude of a bunch of 0's
I see a bunch of red dots when I click on satelites? but it also says mode 2: fix not availible on the bottom of that screen
Click to expand...
Click to collapse
you must try Radio 1.13.25.24...it can be fix your problem.1 week ago i get this error but when i flashed 1.13.25.24 the problem has solved here is the link:
http://www.mediafire.com/?tjmgzm0nz0y
alternative link:
http://www.megaupload.com/?d=USMNPAS1
i stongly suggest after flashing radio, make hard reset...
My gps has been working fine all the time i have had my diamond and worked even better since the orange update a few weeks ago. But yesterday in tom tom and google maps my hardware is not detected. I have tried differnt settings as mentioned on the forums here but still cant get it working. I just wondered if there was another way of trying it again b4 i have to do a hard reset. Any help would be appreciated.
swiftkill3r said:
My gps has been working fine all the time i have had my diamond and worked even better since the orange update a few weeks ago. But yesterday in tom tom and google maps my hardware is not detected. I have tried differnt settings as mentioned on the forums here but still cant get it working. I just wondered if there was another way of trying it again b4 i have to do a hard reset. Any help would be appreciated.
Click to expand...
Click to collapse
- - -
Hi,
it happened exactly the same situation to me then i installed HTC GPS TOOL (i found it on XDA but now i don't remember in which post, just use search) that i run before launching tomtom.
Hope it helps.
Panco
what settings do i need to use on there as i cant get it to connect on any port?
I have the HTC GPS Tool, on my Ignito the port is COM4 and it will connect at any baud rate.
I suggest you set the tool to - COM port: COM4 - Baudrate:38400 - Set the drop down box to 'Cold Start'
There is a label that says 'Open' , Click on it and it should change to 'Close' and you should start receiving data in the output window.
Check the drop down is set to 'Cold Start' and click on 'Nav Init' to reboot the GPS hardware.
If you are seeing any data in the O/P window then the GPS hardware is recognized and working.
HTH
Kim
just tried those settings but get " open com port failed" message.
Oops! Then it sounds like an OS problem or a hardware fault although that's pretty unlikely.
Unless anyone else has a better idea then maybe you need a hard reset?
If it's a WM problem then a reset will cure it
You can reset and leave the Internal Storage data intact, but you'll lose all your installed apps and data on the device of course, so backup (you probably know all this already )
EDIT: Just checking - you didn't change the com port accidentally somewhere did you
windows settings are set to com 4, none and baud to 4800 as i have seen on other posts but still no joy.
i cant even seem to do a hard reset as everytime i try as soon as i touch the red reset button the phone soft resets and doesnt come up with the hard reset menu. I am holiding volume down and enter quite firmly.
You can also hard reset from >Start>Settings>System>Clear Storage with the option to leave the Internal Storage drive untouched
done a hard reset and everything is working fine again! thx for your help
I tried everything and i am jst giving up. what can i do to make this friggin gps work? I followed everything meticulously on ppcgeeks http://forum.ppcgeeks.com/showthread.php?t=36639 without any luck. google maps keeps search for satelites, and nothing. always number is zero. do you have any idea what could be wrong? i am on telus cdma network btw.
hi friend...
1st in which area of this sad world do you live??
2nd what is your mobile operator??
3rd do you have a costant/flat umts/gprs connection trought your mobile??
bye,
davide
i live in toronto. i had blackberry curve before this and the gps was smooooth.
this one is being alil biatch.
i am with telus
the third question i don't understand, but my blackberry curve was also with telus, for a week before diamond arrived and the gps was excellent. i don't know why diamond gps is so screwed up. as i said, my diamond is the cdma version. any help is much appriciated, thank you.
I think to know what can be... I mean that happened something similiar to me, but because I cook a new rom every week the problem has disapperead itself.
Anyway I think it can depend by an old problem relative to a dns library that can be overwritten by some software, like for ex some voip software, this cause the internal gps to stop working.
Just tell me if your gps is detected, I mean if your software (for ex tomtom) searches for sats or it says something similar to "gps not found".
If your gps is detected but the software searches sats for infinite time you must look this procedure:
I strongly suggest, just for have a fast response, to use a software like "gps tool" (download from here): go in an open space & install the cab file, then choose com4 => select "clear memory" => & finally "open", go to information window & wait for at least 5 minutes (you must be patient the 1st time), until you read: mode 2D fix... the bars go from red to green, when you have a fix press (in the 1st page) "nav init", after few seconds you can press "close" & exit the program, now open you favorite nav software & you'll get a fix in few seconds.
Instead if your gps isn't detetced you must look this procedure:
hard reset your mobile, because your dns dlls are corrupted
let me know if you have results... bye,
davide
Hi bro!its me again!
suiller said:
I think to know what can be... I mean that happened something similiar to me, but because I cook a new rom every week the problem has disapperead itself.
Anyway I think it can depend by an old problem relative to a dns library that can be overwritten by some software, like for ex some voip software, this cause the internal gps to stop working.
Just tell me if your gps is detected, I mean if your software (for ex tomtom) searches for sats or it says something similar to "gps not found".
If your gps is detected but the software searches sats for infinite time you must look this procedure:
I strongly suggest, just for have a fast response, to use a software like "gps tool" (download from here): go in an open space & install the cab file, then choose com4 => select "clear memory" => & finally "open", go to information window & wait for at least 5 minutes (you must be patient the 1st time), until you read: mode 2D fix... the bars go from red to green, when you have a fix press (in the 1st page) "nav init", after few seconds you can press "close" & exit the program, now open you favorite nav software & you'll get a fix in few seconds.
Instead if your gps isn't detetced you must look this procedure:
hard reset your mobile, because your dns dlls are corrupted
let me know if you have results... bye,
davide
Click to expand...
Click to collapse
This has always worked for me as well......and I have to do this often as I'm always flashing Radios to try and find the "Optimum" one
suiller said:
I think to know what can be... I mean that happened something similiar to me, but because I cook a new rom every week the problem has disapperead itself.
Anyway I think it can depend by an old problem relative to a dns library that can be overwritten by some software, like for ex some voip software, this cause the internal gps to stop working.
Just tell me if your gps is detected, I mean if your software (for ex tomtom) searches for sats or it says something similar to "gps not found".
If your gps is detected but the software searches sats for infinite time you must look this procedure:
I strongly suggest, just for have a fast response, to use a software like "gps tool" (download from here): go in an open space & install the cab file, then choose com4 => select "clear memory" => & finally "open", go to information window & wait for at least 5 minutes (you must be patient the 1st time), until you read: mode 2D fix... the bars go from red to green, when you have a fix press (in the 1st page) "nav init", after few seconds you can press "close" & exit the program, now open you favorite nav software & you'll get a fix in few seconds.
Instead if your gps isn't detetced you must look this procedure:
hard reset your mobile, because your dns dlls are corrupted
let me know if you have results... bye,
davide
Click to expand...
Click to collapse
yup!work for me too!
hey ninja, lol. how's it going
suiller thanks for the help. i am going to give that a try. i hard reset my rom. i am on juicy 2.5. but it didn't change much. do you think if your first option does not help. i should flash another rom, maybe stock rom, and then put the one i want?
it depends... like mentioned above if your GPS works it just a gps cache problem, in fact soon as cooked the gps cache is empty or corrupted, so it must be reinitialized, doing so the 1st time takes long time
instead if your gps isn't detected, you can check in a minute also by lanuching gps tool, it is yet configured to look at com4 (default com port for gps in htc brand, the problem is somewhere else, I mean that probably the problem could be also in the rom you are using, if the 1st procedure does not work, try to restore your original rom, before carrying back your mobile for warranty be sure it isn't "self-mistake" (for ex by installing an "unofficial" rom)
for what I can say I cooked almost everything & just happened one time, many months ago in my opinion 99,9% of cooked roms doesn't touch gps at all, so I sincerely didn't remember what's happened that time
bye,
davide
hi. thanks for all the help guys.
i tried the gps tool. i installled it and selected clear memory, open, and it never stopped going through the numbers. same numbers again and again, but when i clicked setting it said mode 2 not fixed.
if i recall properly, the gps message i got from google maps was gps not found, but i am not sure ithat it's the rom's fault. it's very popular on ppc geeks. i tried qualcom method to solve the problem but it did nothing. mdata, info, is saved on my hone but no change. so i will try disabling agps, if no help i hard eefresh, or put another rom, if all faili go to fet it replaced, again.
thanks for all you support
ok, i reflashed to stock rom, tried the gps tool, it keeps showing the same method and won't stop. do i need to wait for it to stop?, cuz when i go to information it says mode 2 not fixed.
i am going to hard refresh, and put juicy 2.5 back on, and wait for your help. if nothing i will take it to the store.
I hope you don't have A-GPS cofigured...this will surely screw up your GPS
in tweak diamond, agps is enabled. when i disable it and go to quick gps, it gives me an error, when its enabled quick gps downloads.
should i disable a-gps in tweak diamond?
sure friend, AGPS should be disabled if your provider isn't able to "provide" you that service, beucase it takes busy over & over your gps chipset
there 3 modes to update gps sats positioning:
1) quickgps, simply it's a database where are stored circles/ellipses made by sats, because they are always the same, that data are predicted, so for this reason those values are good also for the near future (at max 1 week), this is the "old" method used by years to make fixing times faster, even if resulting position isn't very accurate
2) AGPS, this should be the last & most intelligent feature, of course your provider must be able to provide that data, if your provider can do this it simply compares your current position (cell broadcast) with the ones stored in their database, and provides automatically to your mobile (trought a regular gprs or umts service) updates positioning, if your provider isn't able to provide this service your gps chipset will be always busy because it scans the network continuosly and other software like for ex tomtom wont be able to access the gps chipset anymore because like told above it is busy by another application
3) classical method, I call old school, and this is also the more realistic method, even if 1st time can take very long and if you don't use very much your navi software it is very annoying because sats runs fast simply it needs a program like gps tool or gps test to full the gps cache (1st time is totally empty), where will be stored current sats position (circles/ellipses), this method can also be reached with last modern navi software, like for ex tomtom7, you must leave it runs until it finds something, remember that 1st time can take up to 20 minutes... it depends also by region & sky conditions, in general in a good environment (ex openspace) for me & in my experience it never took over 5/10 minutes
so if your provider doesn't provide AGPS service simply turn it off and re-run the 3rd method in an open space and you'll see that something will happen
anyway if trought gps tool you are able to open the com4 port and you see data flows it means that your gps chipset is recognized, you have just to wait, if you want a faster/simpler app search here around for "gps test"... simply run it, it detects automatically your gps com port & starts to discover sats
hoping to have cleared something about gps system
bye,
davide
ok, i reflashed stock telus rom, then i flashed juicy 2.5, hard reset and here i am. i got diamond tweak, disabled a-gps:
with a-gps disabled, quickpgs does not update any more. gives me an error at the end.
so i am going to do clear memory with gps tool, but does baudrate matter? when i turn it on it is set at 5600 should i change it to 4800?
do i need to be in an open area when clearing memory, or it does not matter?
if this wont work, i will go in throug hqualcom, and make sure i have the settings posted on ppc geeks forum. i hope something will turn up.
what is the connection though. if a-gps is disabled, quick gps does not download. but when its enabled it does. does it mean telus supports a-gps or it shows that there is an internal problem with my gps?
thanks for all the help.
i installed gps test. it shows yellow circle and GPS starting up. above it shows hdop 50.00 Fix 1D, and baudrate is set at 9600.
does this also take a long time, or is it a good sign. if it shows this, does it mean my gps is working, but only needs to be reconfigured somewhow?
i was just outside for 1 hour, with the gps tool turned on. nothing. it keeps clearing memory, or so it says, but when i look the same numbers show up. i waited for an hour till it got dark and cold and went back. gps test shows starting up gps but never getsa round to it either.
i duno what to do anymore.
ah, where is everyone?
holy crap, finally, i solved it.
I had the same problem after setting AGPS in Advanced Configuration Tool. Nothing I did: soft reset, hard reset even installing new ROM resolved the issue. Finally I found the problem: Go to Programs-settings-phone-services-Location setting-get settings-On. This allows your phone to tell your GPS where you are. The GPS now finds satellites in a few seconds.
Click to expand...
Click to collapse
it was an old habit of disabling gps to emergency only. i didn't realize it would screw me over on a pda. well. nice nice nice.
thanks for all your help everyone, you ahve been great.
this means that your mobile provider supports AGPS feature
so it must turned on... well done