Related
I'm Stuck in BA WM6 Upgrading.
I was at the HTC_Blueangel_WM6_Wizzard Upgrade 4
After execute the installer file I performed a Hard Reset
Colored stripes (the bootscreen) will appear on the screen but I can't ge no debugger screen at all: the BA remain in Bootscreen with R 1.11.0 at the right bottom of the screen.The battery was full. I've tried the mtty procedure as well...no way out. Any clue ????
Have you follow all this steps here?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1
Yes I did and now I'm Stuck at
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4
And what device do you have in fact? Qtek 9090? Other??
Mine is a Qtek 9090 and didn't have any trouble...
Same problem here, wm6 was already running; downgraded to 2003 SE to repartition the extrom, wanted to flash to wm6 again; now my xda3 is stucked after flashing, only r 1.10.0 is shown, no chance to carry on...???
I've got imate pda2k ct2cwj...and Heinzibua I'm stuck on R 1.11.00 do you have an Imate as well ??? cause I guess the official XDA procedure doesn't work for this kind of model (mine was an Italian W2003).
I'm very upset about this...
@ conosciani.m
wm6 worked well on my xda3 , problem was only after repartitioning the extrom.
I'm going to think I did somenthing wrong during the extrom steps..so i've returned back to wm2003 and I'm going to try the upgrade again
please tell me, if you find the solution...
running again
i repartitioned storage in 2003SE set to 20000 kb.
flashed to WM6, no problem now, storage is 41,25 MB, but running !!!
I did it too, I had to reinstalled w2003 and dit the Upgrading BA WM6 wizard again.....
after UNHIDE the rom, this time (and not in the previous upgrading), I did it the rom format using MTTY after that I ran the upgrade procedure and I got the WM6 running.
Happy for both of us to reach the goal......
do you have 60 MB storage now ?
can you give me more infos about MTTY ?
thx
tried to set storage to 60mb again, stuck again, also if i do just the same procedure as yesterday it is stuck; start to hate this device.
please tell me, what you did exactly to make it run. tried mtty also, but don´t know, what to do...
try this...
1. downgrade to 2003
2. copy the utils to the phone(extrom utils and repart_doc.exe)
3. install extrom utils...
---a. tap unhide... ok.
---b. tap unlock... ok. may throw an error but still ok...
---c. reset...
4. run Repart_DOC
---a. Set it to 128 byte
---b. Go/Start/Format (it should succeed)
5. reset to bootloader
---(press and hold record + power button then stick reset)
6. flash WM6 ROM
7. cold boot (press and hold power button then stick reset)
8. (optional) if stuck in the "tri-color"(white isnt a color ) screen...
---Hard Reset. Using No/Yes/Yes option.
reading further about the Repart_Doc topics...
128byte is the smallest you can format/resize the extrom
to maximize the storage in WM6.
Thx, that´s exactly what i did many times without success...
but now it works, after upgrading radio rom there also was no problem with upgrading to WM6; 60 MB rom; i only want to upgrade to radio rom 1.15, then i´m happy.
thx everybody for your help
Hi all,
I tried to upgrade my MDA compact II (HTC Charmer) to WM6, but during the first step, downgrading to the "no vendor" version I made a mistake. A used a wrong version, it was for Prophet. After the final reboot, the device froze in the splashscreen "T-Mobile". After that I tried to do exactly the same with a "Charmer" version, but it didn't help me, the situation was the same.
However, now I'm able to flash successfully only the last vendor provided ROM update "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe", but it doesn't help me anyway, my Charmer is still freezing in the splashscreen. I tried to downgrade it , but the application gives the following error: "UPGRADE ONLY". When I try to make a hard-reset, and after that to confirm the factory settings by pressing "Yes" (green) button, the result is "Format FAT partition" and then "format is failed".
Only the bootloader is working now as well as the battery charging. Please, help me to turn back to the life my Charmer!
And one additional question: can I perform a CID unlocking just by ROM-flashing or the device must be fully operable?
Flash this:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
After that, you should be able to make hard reset. If you succeed, flash "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe" - that.
Hello there,
I am a new use an recently got an MDA PM200. I am in exactly the same situation as petrun. I have tried the flash suggested by vlodeck but it doesn't work, saying incorrect vendor ID (I guess that's because it's for a Prophet?).
What should I do next...?
Thanks.
OK, I succeed with a little progress. Many thanks to vlodeck, I will try to explain what happend...
I successfully flashed my Charmer with this Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Full link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
But it was possible only by using this "No ID" update application, not original one, maybe because my device is still locked:
Full link:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
After that I succeed to format the FAT partition (finally ). But I cannot after all to flash the latest official MDA compact II firmware. There is two possible events, which I experienced:
1. When I try to use the original flashing application, I get the following response: "UPGRADE ONLY".
2. When I try to flash the official MDA compact II ROM, but through the "No ID" application, I get "INVALID COMMAND".
Just for explication, now my device cannot boot, it freezes in the splashscreen (it is Qtek now, not T_Mobile...) and the following versions could be read:
IPL 2.06
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
So, how I can do that? What should I do further? I would like to unlock my Charmer, but should I firstly make it operable?
Thanks in advance for your help, guys!
By the way, all described above I tried sevetal times with the same result.
The other thing is that... all links about the CID unlocking downloads, which I found here are no longer active. Any alternatives?
Rise from the dead!
Incredibly, but it's a fact! After successfull FAT formating I probably didn't wait long enough. Today I turned on my Charmer and several seconds after the splashscreen "QTEK" it successffully booted in WM5, performed all settings and finally started to work!
It's GSM module works, the Bluetooth works, I am able to start different applications. Just the camera does not work. And the most strange thing for me is that this ROM was for Prophet, not for Charmer
So, after all, how to proceed to upgrade to WM6? Now the bootloader is above ver.2.
Should I firstly flash it with proper ROM (for Charmer) or it's not necessary?
Should I unlock it as is now (Prophet ROM)?
Vlodeck, I rely mostly on you, since the WM6 with Touch FLO is your creation.
Thanks!
You dont have to CID unlock. Just flash that WWE T-mobile WM5 AKU2 for Charmer. Good luck.
Maybe I am boring, but steel need an advice: I cannot flash "WWE T-mobile WM5 AKU2".
1. The original RUU gives me "UPGRADE ONLY", maybe because my SPL after flashing the Prophet ROM is 2.20
2. This "NO ID RUU":
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
reaches 2% and gives "INVALID COMMAND", after that - only bootloader screen.
3. This "NO ID RUU":
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
cannot open the nk.nbf image (but works with other images), I don't know why.
What is the solution? Any ideas? Maybe some tool to downgrade the SPL to ver.1? I tried (it perhaps was bad idea)"RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" and IPL became 1.12, but SPL remained 2.20... and Charmer didn't boot after that. After flashing the Prophet ROM it works again and IPL is 1.12, SPL is 2.20
In brief... how to flash successfully the last Charmer ROM?
If you cant flash the AKU 2 charmer rom, then go for AKU3.3 rom (can be german, that doesnt matter). Once done that, flash wm6.
Success
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
petrun said:
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
Click to expand...
Click to collapse
WHERE I CAN GET BOUTH FILES cert_spcs.cab and enablerapi.cab
AND WHAT VIRSION OF PROPHET ROM SEND ME WORKING LINK THX DEAR
Charmer Stuck At Splash Screen
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
MDA2 CANNOT CONNECT WITH ACTIVE SYNC
Of course it cannot connect with ActiveSync, the device doesn't boot. One certain solution for bricked Charmer is Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Use this link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
In order to flash this, you should enter the bootloader, without using the ActiveSync. After that try to perform a hard reset, you probably will succeed to format the FAT partition.
if you cannot connect the pda to pc HOW CAN U PUT THE ABOVE PROPHET RUU ON CUREENT?
I have a charmer and I was trying to update to wm6. I can´t because the ipl is 1.12. I updated rom to german aku 3.3. But I can´t hard reset. format error. I´m trying to put prophet rom to format it, but when I send the prophet rom, it always give me an error at 95%. error 326 - this nbf file cannot be used fo your pda phone. please check your nbf file. the aku3.3 rom flashes ok. any idea?? I try tu send a radio rom. after that is the same. 95%error. please help. I can´t bring my charmerback to life.
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Yallah said:
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Click to expand...
Click to collapse
same problem here... any suggestions or is my charmer bricked?
have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.
Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD
Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?
I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.
Hi everyone.. First post and I think this is a great site. I've managed to flash a wm6 rom to my Orange SPV m700, and although it worked great for a while, I decided to flash my radio rom (initially 1.16.00.00) to 1.50.08.11 not a great idea it would seem, as after a successfull (so it seemed) flash and a reboot, the I now appear to be missing both a radio rom and a gps rom!?!
Can anyone help? I've tried flashing back to a 'orangeuk' WM5 backup (created by someone on this this forum) and I'm having no luck what so ever. The downgrade to WM5 stalls at 82%. My gut suspicion is that it's failing at the radio rom, and I can (sort of) prove this when trying to flash the radio rom - it fails at 0%
PLEASE HELP
Update on this.
Downgraded from 1.30 Hard SPL to 1.20, tried flashing Radio Rom, again no joy. Have also attempted upgrade from SD card - again no joy.
Anyone?, Anyone?... Bueller?.. Anyone?
Just to add, there's no Radio/GPS or IMEI number.. I've seen other people with the same problem but no 'real' guide to fixing..
Just tried (on a whim) to downgrade the radio software down to to 1.16.00.00 using the SD card (basically trying to use Pof's unlocker radio rom) but still no joy, using the SD card just get's about 10% of the way along the progress bar and stops..
I'm struggling here folks
k0pp0 said:
Just tried (on a whim) to downgrade the radio software down to to 1.16.00.00 using the SD card (basically trying to use Pof's unlocker radio rom) but still no joy, using the SD card just get's about 10% of the way along the progress bar and stops..
I'm struggling here folks
Click to expand...
Click to collapse
Try Des' Crash Proof SPL in my signature.
i have same problem .... can't find a solution if you manage to fix it please post
Never did get this working, ended up having to get a replacement phone.. Just debating trying it again, as my current (white) Orange SPV M700 hangs nearly every saturday (bizarre).
hi, I tryed to downgrade my qtek 9090 to wm2003se but I had no success.. i would do it because i have some problems with bluetooth. in this forum I found this article which explains how to fix bluetooth problems ( http://forum.xda-developers.com/showthread.php?t=274425 ) but I'm not able to find all files nedeed... is here someone who can help me? it's the same for me downgrade the rom or fix bluetooth problem.
I have the original rom downloaded from www.pocketdevice.it but when I try to install it, the installation software sais that with wm5 it cannot install the rom (ROM.Qtek.9090.v.1.40.04 ITA).
please excuse me for my bad english! I hope that I've been quite clear to explain my problem..
edit:
I found this page http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade but
# Qtek 1.40.556
# Qtek 1.40.553
# Qtek 1.40.147
doesn't work...
edit 2:
I tryed to restore an old backup but wm5 doesn't accept wm2003se's backup.. wm5 doesn't accept backup at all.. uff..
first to exclude the most common mistakes:
- did you set the phone in bootloader before starting the flashing?
- did you use the BAupgrade_noID.exe, instead of the BAupgrade.exe?
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Lollo_RM said:
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Click to expand...
Click to collapse
I know that, when you try and flash the original rom or original updates, you usually don't have to do the things above, but, when i had to downgrade to wm2003se, it wouldn't have worked without.
1. i try and attach the _noid.exe that i downloaded with a helmi rom, as google wouldn't find a direct download source and i wouldn't want to search this forum forever, and as you don't search it yourself, i assume you don't want to spend more time looking for it as well. Anyway, the noid.exe is the same flashing prog as the original but it bypasses the check for country id and other crap.
2. the bootloader mode is also essential because, well... i don't know, why exactly, but i assume that not all roms and flashing software manage to enter the bootloader mode correctly, or too late, and you could get stupid errors like it was the wrong device for that flash.
so, i hope, the upload worked, it is everything you need to flash your device, either put the "nk.nbf" of your rom in there, or unpack the original rom and put the noID file in that folder and start it
ok, i did exactly what you wrote and now everything work! thank for you help!
why would you even downgrade? i upgraded mine to wm6 and i think i'm not going back to 2003se
first of all, because english is not my mother language and the os language is english. i found some problems using bluetooth and wifi connections and i could not download the right patch so i decided to downgrade to wm233se
SIM TOOL KIT is the only reason one would want to downgrade
Maybe you could try an 6.1 ROM.
RUU_BA_xplode_WWE_6.11.00 works perfectly and has an standard wm6
interface.