windows 2005 - PDA2, XDA IIi, 2020i General

hi all can anyone tell me if windows 2005 is available for my xda2i plz

nope. unfortunately not. and most likely will not be for a while.

unfortunately there wont be any at all unless someone is able to make it compatable but o2 say there wont be a wm5 update threre was even a partition which failed misserably

Related

Problem upgrading in VISTA

Hi. im tryin to upgrade my BA with Helmis latest version (1.4 or 1.4 vanila) ant it seems windows vista doesnt cooperates with me.
i follow the instructions. i even tryed to use the 2003 downgrade method but i get the error that the BA is not connected in the craddle.
i wonder if vista screws the communication.
anyone solved this?
thanks
so far there is no solution to this yet.
ok, so its a know issue. i thought that i was doing something wrong.
another thing is that i run getdevicedate. the devicedata.txt has strange characters in the operator code.
also, if i run baupgradeut.exe it gives me a country id error and some wierd characters...
is this a vista problem?
muppet said:
ok, so its a know issue. i thought that i was doing something wrong.
another thing is that i run getdevicedate. the devicedata.txt has strange characters in the operator code.
also, if i run baupgradeut.exe it gives me a country id error and some wierd characters...
is this a vista problem?
Click to expand...
Click to collapse
no it's not vista problem. sometimes i see those funny characters in devicedata.txt as well, dont worry about that. and about bupgradeut.exe gives u country error code, use maupgrade_noid.exe instead, it will fix it.
Hi. tks.
but the maupgrade_noid.exe gives me an error also(error 101 connection error). should i be in bootloader?
should i also run the setoperator.bat first? the tproblem is that i dont know it cause its corrupt in devicedata.txt
weird
imatrix said:
no it's not vista problem. sometimes i see those funny characters in devicedata.txt as well, dont worry about that. and about bupgradeut.exe gives u country error code, use maupgrade_noid.exe instead, it will fix it.
Click to expand...
Click to collapse
this is anoying how some people wont tell where to get it from, pm or something atleast
rnbguy said:
this is anoying how some people wont tell where to get it from, pm or something atleast
Click to expand...
Click to collapse
You can't expect people to keep replying to stupid questions! There is no Windows Vista for the PDA2K or ANY PDA for that matter. Windows Vista is a PC operating system not a PPC operating system!
As for problems connecting a PPC to Windows Vista you may want to download the latest versions of Windows Mobile Device Centre Driver for Vista:
ftp://xda:[email protected]/Uploads/Software/WMDC_drvupdate-x86.rar
ftp://xda:[email protected]/Uploads/Software/WMDC_drvupdate-amd64.rar
still problems with AKU2.0 T-Mobile MDA Vario I and Vista
I installed the Windows Vista Mobile Device Driver Update Final, but my MDA Vario I is not connected. It is not recognized anyway. Any ideas how to solve this issue?
Thanks.
Markus

windows vista-wizard upgrade utility here but.....need help

ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Version
Is it version 2.6?
robjae said:
Is it version 2.6?
Click to expand...
Click to collapse
no......... but it works with vista with the original rom.
Tmo
There is a 2.6 on the T-Mobile site for the MDA.
faria said:
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Click to expand...
Click to collapse
Faria, I dont know how to remove the coutry id check but will be great if you upload it to the ftp for those that have problems(like me) using old ruu in vista.
Thanks.
XP OS & Vista OS
I have not been successful in getting this to work in Vista OS, so I just created a partition and installed XP as second OS. Hey, it works until bugs worked out of Vista.
XP OS & Vista OS
I have not been successful in getting this to work in Vista OS, so I just created a partition and installed XP as second OS. Hey, it works until bugs worked out of Vista.
Hi Faria!
Just to let you know that I've just contacted the guys at I-mate regarding this problem and they said there's already one version coming soon.
Hope it does not take so long!
Regards,
RUU from Cingular
I can flash my phone with Vista, with the offical Cingular 2.25 (which uses RUU 2.5.2) ROM. When I replace the nk.nbf, it can't open the file. Maybe this helps. If anyone knows what the RUU looks for in the rom file, maybe we could fix it.
Did you tried tools than enable all buttons of an application ? (I've done than quite a long time ago and it worked) ?
EDIT : have a look at http://www.angelfire.com/falcon/speedload/Enabler.htm
any luck on this?
faria said:
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Click to expand...
Click to collapse
could u please give me the vista update utility?

Wrong device upgrade, none of Wm5 is working

Hello! I talked to xplode about this and he had no clue what could it be...
soul_train said:
...When I run Device Software Update Utility I go to next. It finishes with updating info I go to next. And then it says "This ROM update does not design for your device, please get a proper ROM upgrade and thry again...
Click to expand...
Click to collapse
-------------​
xplode said:
Strange, works fine here, try to repeat the procedure afterall you upgrade with noid, it is not likely to get error like this
Click to expand...
Click to collapse
Don't know where is the problem. I have Helmis 1.4 3.5AKU... I have thryed both new WM-s and On both I get the same problem. So if anyone knows help would be appreciated. Thanks!
Soul Train
I got the same error message. I tried to change operater, but that didn't do the trick, so I'm still on the case
Edit: I'm normaly using Windows Vista, but I still have my XP installation, so I tried to boot in XP an run the upgrade from there. This worked fine, so mayby it's a problem with Vista althroug it should work. So my best advice is to try reboot you system, i know it's not alot of people who runs dual boot systems as standart
hagsted said:
I got the same error message. I tried to change operater, but that didn't do the trick, so I'm still on the case
Click to expand...
Click to collapse
What WM do you have? Shoud I try to Revert back to Wm2003 and try like that?
I upgraded from Helmi's Aku 3.2 to Xplore's 3.5 R4. If you have the posibility, try to connect your BA to anothor PC and run the update from there, I think it's a problem caused by Windows on the specific pc.

Trying to rebuild the bios on my borrowed machine

Hi,
I do help someone can advise me. I am in the difficult position of having borrowed an O2 XGAii and having the hubris to try and upgrade the bios. The process failed and now the device is completely dead and wont respond in any way. The owner is asking for it back. Any clues on how I can fix it or even who I can take it too in Sydney, Australia to fix it for me?
Thanks in advance
erm i suppose u mean a xda2 or the xda2i?
as this is the forum for the xda2i
if the device is showing boot loader on the screen then just rerun the update but not on a pc running windows vista or it will fail, u have to use a xp or xp pro pc. you will find the bios updates in the forums, but make sure you are sure which pda you have.

Windows Mobile Upgrade TREO 750 - so confused and lost - NEED HELP!

OK, I am sure this question has been asked a bunch of times but I want to make sure I get the most recent answer.
I just purchased an unlocked Treo 750 off Ebay with the 5.0 OS on it. Obviously I want to upgrade the system to 6.0 or 6.1 but which one do I want and where can I find the download since it's not available on Palm's website anymore???
I have an XP Operating System and Microsoft 2007 on the computer that I will be syncing it to and I am under the impression that 6.1 (which I think is the most recent upgrade) only works with Vista.
My carrier is AT&T
Please help. I'd like to get this sorted so i have everything ready to go when I receive my new Treo next week. I currently have a Centro and am very excited about upgrading to the 750.
I am sure the answer is somewhere here but I can't seem to find it!
Thanks so much!!!
go here for the @TT wm6 official update: HERE WMSix Off + ActiveSync
Now depending if you have a minisd or not, download the appropriate version you need. If you choose the desktop update (USB SYNC cable needed), make sure to install activesync first.
If you have a minisd, just save the CHEEIMG.nbh to the root of the memory stick, and enter bootloader by holding the media button and hitting reset.
After updating to WM6, follow the UNBranding and UNlocking post to update to 6.1
but can I use this download if my phone is NOT AT&T? My carrier is AT&T but I don't know if it's an actual AT&T phone - I jusr know that it's unlocked.
Yes, you should be able to use it.
WM6.1 does not require Vista. Don't know where you got that from. In fact, you will probably be upgrading to 6.1 using an SD card in the Treo, and not your PC.
In case you don't already know this, there is not an official update for 6.1 on the Treo, you will be using a hacked ROM if you decide to go with 6.1.

Categories

Resources