just got it today - PDA2, XDA IIi, 2020i General

hi all i have been using the xda2 mini s for the past 2 weeks as i got one on a contract 2 weeks ago from o2 . anyway took the phone home took the o2 active stuff out of it and filled the phone up with spread sheets and all my contacts and lots of other things . the phone was to slow to use for what i can see . maybe it was all the stuff i had in the phone i am not sure . also the keyboard was starting to get a bit loose after 2 week down the line . so i thought today i have had enough of this crap phone its going back . so of i went with the phone boxed and everything as new back to the o2 shop to state to them it was slow and i have hard reset the phone about 3 times and that it was just not up to cutting the cream if u asked me . so the guy said no bother at all i will just give u another phone . and i said no i dont want another mini i want the xda2i to replace it . so he did and now i have something i can use and depend on . i said to the guy that my old p900 was faster than the mini he laughed . i dont care what he thinks i no for sure that the p900 was faster than the mini . any way i am happy i have the xda2i instead of the little unusable mini
just my 0.02 pence worth

I know what you mean, I had a Motorola A1000 which has the same Symbian UIQ OS as the P900 and it was a nippy blighter although the built in GPS was shoddy.
But overall the hardware side of things the processing power isnt a scratch on the mini or the 2i.
Due to Symbians nature of running a very small kernal and also stored on a lot less space makes it seem so much better.
The only problem I found with Symbian OS's is they're not(or wern't) majorly supported like WM03/05.
If you could re-compile a Symbian UIQ OS for the 2i that would be a beast of a device.

u r right mate about the os would be good and stable . anyway thats about 3 hours i have been playing with the 2i and its fast real fast for what i can see . i hooked up to the net on it tonight and i could not find how to disconect from the net .... also whats the best place to get a card for it i was looking to get a 2 gig card what do u guys use in your xda2i

Disconnect from the net by holding down the red hard button on the bottom until it wines!
My old Xda IIi (i killed it a few days ago, cracked screen and completely dead when I woke up, don't know how it died overnight) never had a problem with memory cards... this one locks up sometimes if i have one in.
My advice is to either go for a number of SD cards (512Mb ish), the cheapest you can find, or go for a Kingstone 2Gb.

Related

Help on a Non-Windows Based Phone

Hi Everyone
I Have a friend who has just recently bourght a sony ericsson w910i
the flick of the wrist to change a song phone...
he got it when it was brand new in shops
it has developed a problem...
after turning it on after 20seconds or less it restarts and just goes into a continus loop....
i know xda-developers work on windows based phones but i just wanted to see if xda could strech there maverloss tecnical wings of theres and see if we could get this fixed!
lets see if we could put a smile back on his face!
chears
Westie
This handset is less than a year old, why not just send it back for software upgrade?? As you are from the UK also, not many people do know this but all mobile phones now have a 24 month warranty (they dont tell you this to stop you from taking your phone back but this is EU law)
just found out this is a world wide problem is so bad that some operators who sold the phone are asking for there return!!
http://techdigest.tv/2007/11/orange_recalls.html
touch wood i dont think this has ever happeded to SE before but it has happened to nokia a couple of times!
glad we can get around theses problems!!

I'm never buying another HTC phone...MicroP Error, AGAIN.

Ok so here's the story:
Got my HTC Diamond (unlocked version) back in June 2008 for about $700 USD.
Few months later the backlight stops working and it gives me the microp version mismatch error.
I send it in to HTC for repairs, a month later I get it back, working again.
Now I've had the phone back for about a month, and today I turn on the phone and guess what: NO BACKLIGHT! When it finally does boot up (without the backlight) it gives me the MicroP version mismatch error AGAIN.
What a piece of junk. In less than one year this phone has died twice on me. I still have old sony and nokia phones from 6 or 7 years ago that work 100%, yet my HTC Diamond has died twice in less than a year?
I'll never buy another HTC phone. </rant>
That sucks that you of all people ended up getting the 1/100000 lemons out of the factory. I've gone through a few HTC's and have NEVER had a problem with them, as I'm sure not many have.
I'd give it another chance if it was me, god knows I love WinMo.
yeah...well i just called HTC repairs again. they said they will pay to have it shipped back to them for repairs, again.
hopefully it doesn't take too long...
i still think it's funny that the crappy free phones i have from years ago still work great, but this $700 phone keeps breaking on me! grrrrrr
It's because those 'cheap crappy phones' have 1-10 components inside, whereas the Diamond has 10x that (g-sensor,gps,wifi,etc) so there's so much more possibility of something breaking.
I think you've just been very unlucky, I've owned tones of phones and not one of them has ever failed on me.
I would suggest that if your Diamond fails again (touch wood it doesn't ) demand a new one as replacement, as it's probably beyond repair.
Bad luck for you.
I ve had HTC devices for about 4 years and never ever had a problem. I even dropped my HTC Wizard twice and stepped on It. And it still works !!!!
So Go and buy a Iphone
sony and nokia phones ... how many? why changing to htc if your phoneS works 100%? work both phoneS together 100% (sony 30% and nokia 70%).
i was the master of making a phone unflashable and unusable.
1. prophet: soundproblem ... after looking inside and try to repair = death
2. artemis: during flashing pull usb-cable = never starts again
2.1 artemis: after more than 100 try-flashing for reanimation the resetbutton gone to god
3. eten x800: 2 days old in germany, no roms, try something like x500 udlr = unflashable since today but function o.k.
4. diamond: 1 day - 1 hour - first think was flashing. it flyes with me to Turkey, drinks water, fly to wall (2 times), flashing and cooking, i think i would marry it.
today its a htc what you never buy, tomorrow its a palm and the day after its an other phone. do what you want and have fun with your new never-want-buy-xyz-phone ....
my oppinion is: i cant understand why you posting here ... ?
xavierdemon said:
I think you've just been very unlucky, I've owned tones of phones and not one of them has ever failed on me.
I would suggest that if your Diamond fails again (touch wood it doesn't ) demand a new one as replacement, as it's probably beyond repair.
Click to expand...
Click to collapse
I agree with this comment! After two attemps at resolving the same issue, any manufacturer should replace the handset completely.
Best of Luck
i must say
only had HTC phones since 2002
not once has one broke down on me....
i have dropped a few....but thats me....not the phone
HTC the only one !
I´m a big fan of HTC. Now i have a Diamond. Earlier: qtek, nokia, motorola, soyericson and more....
From heavy models on 2 kilos in 30 years!
I think i never have another brand then HTC anymore, This is the best phones.....
okokur said:
sony and nokia phones ... how many? why changing to htc if your phoneS works 100%? work both phoneS together 100% (sony 30% and nokia 70%).
i was the master of making a phone unflashable and unusable.
1. prophet: soundproblem ... after looking inside and try to repair = death
2. artemis: during flashing pull usb-cable = never starts again
2.1 artemis: after more than 100 try-flashing for reanimation the resetbutton gone to god
3. eten x800: 2 days old in germany, no roms, try something like x500 udlr = unflashable since today but function o.k.
4. diamond: 1 day - 1 hour - first think was flashing. it flyes with me to Turkey, drinks water, fly to wall (2 times), flashing and cooking, i think i would marry it.
today its a htc what you never buy, tomorrow its a palm and the day after its an other phone. do what you want and have fun with your new never-want-buy-xyz-phone ....
my oppinion is: i cant understand why you posting here ... ?
Click to expand...
Click to collapse
Man.... Stay away from anything that looks like a mobile phone !!!
yeaa bro.....u were just unlucky......
i owned almost 5 HTC phones in these 4 years back.......and never had to face such kind of situation....
infact i love HTC for its performance and value for money price...
it is always a best phone to have....no matter wht model is...
@ asrdias
never, sir ...
i forgot the points
2.2 artemis: bought a broken artemis on ebay for 50€ and make from two damaged orbits one functionally orbit.
2.3 artemis: using a german cooked rom from htc-developers;
2.4 artemis: 100% no problems !!!
3.1 send x800 earpiece for spend somebody and used for me an earpiece from an old handy. 100% no problems !!!
i hope, in future i can write
4.1 diamond: tv-out (what ever, negative or postive message)
if you are angry about my first post, please excuise me, i am 36 years old and have the last time english 20 years ago. somethings comes/reads harder than i really meaning ...
okokur
I am having the exact same problem as the OP (microP error). Can anyone plz point me to a solution..
Is this a hardware or software problem ?
Can i get rid of it by flashing ?
archeopetrix said:
I am having the exact same problem as the OP (microP error). Can anyone plz point me to a solution..
Is this a hardware or software problem ?
Can i get rid of it by flashing ?
Click to expand...
Click to collapse
im interested in that too, my phone does the exact same, and a friends.
is there any "home solution"
My Diamond broke twice during the first 2 months (overheated and wi-fi became dysfunctional). A friend's Diamond overheated so much whilst navigating that it broke too.
I've had mine for almost a year now but my next one will definitely be an IPhone. My Diamond has been immature and unstable from the beginning, requiring third-party software and registry patches for basic functionality like setting touchscreen sensitivity and the integration of the address book into the phone user interface is just moronic. Scrolling is plain awkward in TF3D, nothing like the smooth control you have on the Iphone.
My first HTC was a Qtec S200 and it was better in every respect except that it lacked GPS. More robust, better battery life, better GSM sensitivity, better wifi range, better touchscreen sensitivity. Solid as a brick.

Help Please! My Sons Tilt is Failing....

Ok.... I have had my Tilt for a year & 1/2... My (then) 14 y/o son became very envious of my phone... We are not a "rich" family and my son saved up for months and finally could afford the phone last year... He bought it 100% on his own, as well as pays his own prepaid AT&T Go minuites for it....
About 6 months after he got it, we got the typical USB problems... We worked around them by syncing via Bluetooth, and buyign spare batteries as well as a stand alone battery charger.. Everything worked great until this week... Tuesday night, it said the Sim was not there... I tried the placing tape on the back of it, and that didn;t seem to help... tried a few other things I read, nothing seemed to help except when we first booted up the phone with it the keyboard slid out... As long as we didnt; close it, it would work (Atleast for TXTing)... But even that was sketchy at best... since then that stopped working completley, and as of lastnight the touchscreen died... Any suggestions at all? Please don't tell me to go search for answers on google... I have already looked.. If there is no hope, please send cash offers if you are intersted in buying it... Thanks in advance for your help....
Teej53214 said:
Ok.... I have had my Tilt for a year & 1/2... My (then) 14 y/o son became very envious of my phone... We are not a "rich" family and my son saved up for months and finally could afford the phone last year... He bought it 100% on his own, as well as pays his own prepaid AT&T Go minuites for it....
About 6 months after he got it, we got the typical USB problems... We worked around them by syncing via Bluetooth, and buyign spare batteries as well as a stand alone battery charger.. Everything worked great until this week... Tuesday night, it said the Sim was not there... I tried the placing tape on the back of it, and that didn;t seem to help... tried a few other things I read, nothing seemed to help except when we first booted up the phone with it the keyboard slid out... As long as we didnt; close it, it would work (Atleast for TXTing)... But even that was sketchy at best... since then that stopped working completley, and as of lastnight the touchscreen died... Any suggestions at all? Please don't tell me to go search for answers on google... I have already looked.. If there is no hope, please send cash offers if you are intersted in buying it... Thanks in advance for your help....
Click to expand...
Click to collapse
You can try to tighten all the screws around the sim card slot and make sure that nothing is obstructing the door from locking tight.
Try a hard reset to reset all the software. I would say to try to re-install the rom, but you say the usb port is bad. Other than that, it is warrantied for a year, call the store or HTC and see if there is anything that they can do for you.
I will try that... but I am thinking maybe it is the ribbion that connects the screen to the motherboard seeing as everything on that part id the problem (touch screen, sim card, screen flickering now).. it is defintley out of warranty as well
Teej53214 said:
I will try that... but I am thinking maybe it is the ribbion that connects the screen to the motherboard seeing as everything on that part id the problem (touch screen, sim card, screen flickering now).. it is defintley out of warranty as well
Click to expand...
Click to collapse
well, maybe you can fix the kaiser completely. cnn.cn is selling usb connectors http://cnn.cn/shop/htc-oem-connector-p-4745.html
and here you'll get a new htc kaiser flex cable assembly (thats the part name, google for it to find other offers) http://www.diytrade.com/china/4/pro...TN_II_Kaiser_HTC_P4550_Flex_Cable_Ribbon.html

R.I.P My TyTN

Its served me well for the past year but now i fear it has gone kaput..
2 days ago i noticed my homescreen had "no service" listed.
strange as i normally receive a 3g signal fine in my area with no loss..
So i figured take the sim out,
give it a clean and pop it back in
That came the same thing,
"no service"
So i took that sim out and tried my others [o2/tmobile and lebara]
Same thing, wouldn't get a signal..
==
So afraid to say this thing may end up on ebay or in the free ads as a faulty/repair handset as im lost with what to do.. >__<
Any advice guys?
[EDIT]
Yes the phone was unlocked,
must've been through atleast 14 different roms over time but that shouldnt effect this surely.. o__O
Have you tried a hard reset or reflash?
If your phone still dead..when there's a dead body...commonly there's always an autopsy . It can be hardware (antena), maybe something is loose in there.
Try hard-reset if not working flash stock and see if disabling 3G helps... Check no problems carrier side.
As Mr Clown said genrally a way to fix you just have to try every scenario and if not then might be hardware @ which point you can decide if worth the time/outlay?
Thanks guys for the info,
@MrClown I have tried a had reset to only end up in the same situation,
I will attempt a stock rom flash tonight to see if that helps
@Stylez Again i will try a stock flash and see if it helps,
Found a good one on the wiki so that should help
My guess is hardware related as the phone had been dropped a few times in the house albeit over many months not repeatedly,
I'll report back later guys
so thanks for the advice
hey dude! all is not lost! this is a common problem with the kaiser due to the sliding mechanism, i.e. "moving parts". over time, the wear and tear often causes the "main flex cable" to become loose/faulty. i had the same problem at the beginning of may 2010...had it fixed in 1 week and it worked fine. then i got an HD2 in june 2010 but the kaiser still works just fine!
i had made up my mind that the kaiser needed to be replaced the day it went bad. BUT i did not give up hope on it and decided to have it repaired because it is worth more in the second hand market with working phone functionality. did a simple cost-benefit analysis and figured i'd have it repaired AND get an HD2.
wouldn't you know it, i ended up GIVING the kaiser to my brother...had i sold it to a potential buyer, i'm certain it would be worth more if the phone parts work.
...and just to summarize! HD2 is GREAT! but i really miss the hardware keyboard of the kaiser and the super duper redundancy the kaiser had in terms of buttons...D-PAD+jog wheel+arrow keys on hardware keyboard, THREE OK buttons...count them! TWO start menu buttons. oh and the HD2 has a soft reset button in a REEAAAAAALLLLLLYYYYY difficult to access area behind the battery cover, unlike the kaiser's super friendly poke-the-stylus-in-the-hole approach. BUT i highly recommend the HD2 if you still fancy windows mobile...fast, HHUUUUUUGGGEEEE screen, and it seems android just might happen soon on the HD2.
ASCIIker said:
hey dude! all is not lost! this is a common problem with the kaiser due to the sliding mechanism, i.e. "moving parts". over time, the wear and tear often causes the "main flex cable" to become loose/faulty. i had the same problem at the beginning of may 2010...had it fixed in 1 week and it worked fine. then i got an HD2 in june 2010 but the kaiser still works just fine!
i had made up my mind that the kaiser needed to be replaced the day it went bad. BUT i did not give up hope on it and decided to have it repaired because it is worth more in the second hand market with working phone functionality. did a simple cost-benefit analysis and figured i'd have it repaired AND get an HD2.
wouldn't you know it, i ended up GIVING the kaiser to my brother...had i sold it to a potential buyer, i'm certain it would be worth more if the phone parts work.
...and just to summarize! HD2 is GREAT! but i really miss the hardware keyboard of the kaiser and the super duper redundancy the kaiser had in terms of buttons...D-PAD+jog wheel+arrow keys on hardware keyboard, THREE OK buttons...count them! TWO start menu buttons. oh and the HD2 has a soft reset button in a REEAAAAAALLLLLLYYYYY difficult to access area behind the battery cover, unlike the kaiser's super friendly poke-the-stylus-in-the-hole approach. BUT i highly recommend the HD2 if you still fancy windows mobile...fast, HHUUUUUUGGGEEEE screen, and it seems android just might happen soon on the HD2.
Click to expand...
Click to collapse
Well if you'll care to enlighten me on where i could get this repair done id be most glad,
Wont be handing it to the people in my local market to fiddle with as i dont trust them at all
As in regards to the previous two guys a stock rom didnt help at all it still refuses to get a signal,
so its definatly something to do with this "flex cable"
But in regards to the HD i wont be getting one,
Most likely i'll be getting another xda exec [htc universal] for my social needs,
I have a tendancy of using dated hardware and pushing their limits
sure dude! i'm just going to post links here of THREE other threads about this issue (so you can verify with some more testing if the flex cable is really the actual issue), in which i have contributed my experience. you can read my posts there as well as all the other very helpful posts of other members.
http://forum.xda-developers.com/showthread.php?t=515264
http://forum.xda-developers.com/showthread.php?t=692530
http://forum.xda-developers.com/showthread.php?t=620069
summary: first try some of the debugging techniques mentioned in the above threads and look for signs that the flex cable is indeed faulty. if so, you have 2 options:
1. get a do-it-yourself kit (available on many websites and also on ebay) and errrr do it yourself!
2. have someone reliable and experienced with such repairs carry out the repair.
i had to go for option 2. and i had to rely on the parts that the service repair guy had to offer (he cannibalized the flex cable from a tilt so the front camera of my tytn2 is no longer detected!).
i totally understand the need to milk out every last drop from these expensive devices. i truly respect the tytn2 even though it is an old device. that little bugger still has so much potential. hope this helps!
Ahhh much thanks for the information man,
You have no idea how appreciative i am
Its definatly a hardware issue so its gonna have to be a replacement fixup for myself,
Looking into this listing on ebay:
http://cgi.ebay.com/HTC-TyTN-II-P4550-Kaiser-Flex-Sim-Card-Slot-Repair-Part-/290442707411?cmd=ViewItem&pt=PDA_Accessories&hash=item439fbc01d3
Essentially from hong kong as usual but that looks like it would do the job,
The only problem now is that i have ZERO experience with mobile based mainboards and hardware changing,
Give me a pc or mac anyday and ill be done in seconds but im afraid im blank for mobile operations,
Would any UK members be able to give advice as to somewhere i could get this fitted?
Only option i can think of is at the carphone warehouse..
as in my first post i dont really wish to give this to the market people for a botched job
And much thanks to ASCIIker for all the helpful information,
cos id really dread getting rid of my TyTN II >_<

Concerned about my Xperia Z's glasses

Hi guys! So .. I wanted the Z since release but I couldnt affort it back then .. so i saved my money and I was able to buy a used one (but still with the printed film on it) with simlock for cheap (because of the simlock) .. then I removed the simlock and Im actually ready to go .. while ive been doing all this and earlier I read articles about the phone .. everyone loved it .. So then i ordered it. Now i should be ready to go but while searching for some good custom roms on here ive also took a look into the troubleshooting thread...and i found some very major problems .. for example the lifting backplate when the phone is heating up or in sunny and warm weather conditions...that wasnt that much of a problem for me tbh...but then I found the posts about the sudden cracking screens or back glasses when taking it out of the pocket or because of changing weather conditions ... so that made me really concern about my device and I stopped using it now. and im thinking about selling it (its still has the printed film so its still kinda new) and getting an HTC One or something .. but i actually want to keep the Z I love the design and the ability to get a 32gb (or even 64?) micro sd card in it ...I also know about the flaps wearing out soon but I dont rely on the waterproof thing anyway . I also noticed that there have been much more english people complaining about cracked glasses .. when I take a look at german forums or enter the problem in google there arent that much people complaining (maybe because of the climate thats different in germany) ... so .. what would you suggest me to do? Id also like to know how much people there are that have the phone (nearly) since it was released and are still happy with it .. and id also like to know some more MAJOR problems..so hopefully you can help me and give me an advice!
greetings

Categories

Resources