BA Win 5 Syn. and WiFi problem,please Help - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I upgraded my XDA 2s to WM5 and patched all the problems and got them worked i:e:Camera,Album,blue tooth,backlight, Buttons,MMS, andVideo.
1) But I can not Sync through craddle just does not find the device, but can easliy Sync through blue tooth and infra red.
2) WiFi easily finds the network and shows connected and shows the signal strength as well, but once I open the explorer type the addrtess press go after a moment an error message shows up saying Page can not be found. I tried so much to find the solution but in vain I must have reloaded the upgrade more than 50 times but failed every time to fix it.
Can any one up there could help please.

Related

problems installing 20070418_RUU_Trinity_LVSW_WWE_1.25.0.8_GPS_AKU3.5. 2

Hi All.
I just purchase a new unlocked HTC P3600 (1.15.405.5 is the verision that the device came with from the store) here in Canada.
This unit came from the store with the GPS icon available in SETTINGS/CONNECTION connections.
I have spent the last week reading, and reading, and rereading all you guys great posts on the new "cooked" ROM updates provided for FREE from some of the members/developers here, and the hints and tips for usability! Thank you all for this site and forum!
Now, into my question.
With the verision of the ROM that I have, is the GPS activated? I do see the GPS icon in the I have installed both google maps and live search which both software seem to have GPS functionality built in. I would like to get these programs to work with my built in GPS. However, it is a bit confussing when reading through all the posts on GPS to figure out what are my GPS settings that I should use from this particular ROM verision? I spent 2 hours trying every single combination of GPS program port (COM0-9 and GPD1-9) and GPS hardware port (COM0-9), with out success with either of the two softwares (live search or google maps). Both give an 'can't communicate with GPS' errors, with any of the combination settings.
FYI- I turned on the 'manage GPS automatically' when trying these comb settings. Each time I tried a different setting, I didn't do a soft reset.. just changed the GPS settings.. and then went back into one of the two program mentioined above and tried.. each time it fails with 'can't commicate with GPS'.
Question: do I have to do a softreset everytime I change the GPS settings? AGain, the device manual has NO documention on how to setup the GPS settings.. and the forums is somewhat confusing as I don't know if these methods are ROM specific or not.
Is there any utility that I can use to see if my GPS is activated/working under my current ROM?
Secondly, if my ROM is too old and I need an updated verision.. I have a small problem here too...
I downloaded LVSW ROM: 20070418_RUU_Trinity_LVSW_WWE_1.25.0.8_GPS_AKU3.5.2, which from what I have been reading here.. is a exellent ROM! But I have problems installing it...
My battery is 100% charged.. I am using my USB cable with my laptop (so powerfailure won't 'brick' my phone) running Win XP SP2 with ActiveSynch 4.5.
I make the activesch connection fine.. I lauch the .exe from the ROM.. i get past step 3 in the wizard... by clicking NEXT to install the ROM.. on the phone a verification prompts me to allow this program to run.. but as soon as I click accept/allow.. the wizard on the laptop immidately loses connection with my phone and says 'can't communicate'.. on my phone i get a red, green, blue and white bars with the text.. TRIN100, IPL_SSPL by Des, TRIN100, SPL-1.07.ds, and in the white area it says serial.
Thank god it didn't 'brick' my phone.. a softset brings my phone back to normal. I have tried this twice.. but same error problems...
I just want to get the GPS workings with my currently ROM with live search or google maps OR install this new ROM and get the GPS working with the same 2 programs.
If anyone can assist it will GREATLY be appreicated!!! I hope have i provided enough details for some of you PROs out there to assist me... lol.. hopefully I am not doing something stupidly wrong!
Thank you,
Chris
ps: In regards to my above post, I have tried the recommended baud rate of 4800, 9600, and even 57600..in the GPS settings again.. no luck...
Thank you,
Chris.
Hello did you upgrade the radio rom???
If not go here and do it,
you really nead that...
RADIO_ROM_1.38.00.11_Only_SSPL.rar
Hi Audsim.
Thank you kindly for the note and the link. I have already downloaded it.
Is this all I need to get the GPS working?
Yes you have to update also the radio part to enable the gps on your device...
Ausdim,
Thank you very much for you help. The radio update ROM installed perfectly!
I thought I would also mention that I found a 'work around' for the LVSW install problem (referenced in my post above) for those that might have the same problem.
Every time, I would try and install the LVSW ROM... on the last step in the wizard, I would get an error on my laptop 'connection error - can't communicate with the pda' and I would get a colored screen on my phone.
Before, I would just unplug the USB from the phone, do a soft reset to bring the phone back to normal and try again.
What worked, is that I left the USB plugged in after this error. I close the install app down and reopenned it (yes the phone was still on the colored screen).. then I would go through the install wizard again..and it worked!!
Very odd behavour as I followed the provided installation instructions to the T, but atleast I got it working and all is well!
Thank you again!
Regards,
Chris

Activesync connectivity! GRRRR!

All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
ActiveSync
Moved message
Needs a little bump here
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Sounds like something has changed on your PC, perhaps via a Windows Update. Have you checked to see if your firewall is the culprit?
You may also want to do a clean uninstall and then reinstall Activeswync 4.5 and create a new partnership with your device.
You can also try restoring your PC back to a date that you were able to use Activesync....
This happens to me rather frequently (I am looking for an ActiveSync replacement because of it).
However, I fix it by either soft reset of the device, PC, or sometimes both. If that doesn't work, you need to delete the partnership with the PC and reconnect.
RK
...any solutions yet?
I just got my kaiser 3 weeks ago after using a wizard for almost 2 years. what a great phone the wizard was... I kinda miss using it! Anyhow, i just experienced the sudden activesync failure. I now get random activesync openings on my kaiser with the message "To synchronize your device with a desktop computer... yada yada".
I have already setup a bogus server and set the scheduling to manual.
I have compared the wizard registry to the kaiser registry by searching every instance of 'activesync' and couldnt find anything.
I also deleted all instances of activesync in the notification queue and had memmaid rebuild it.
The device will connect to activesync but pops an error message that it could not synchronize and goes into a guest account setting. So for now I am having to use pimbackup to backup my data on the kaiser, bluetooth it to my wizard, then sync the wizard with my laptop to get the data into outlook. I am considering a hard reset but kind of want to wait until the at&t 6.1 official Rom comes out. I am also considering Chapura Pocketmirror Professional which worked well on an old Ipaq i had (wm2k3) that had sync issues. I also want to get this resolved so i can practice loading a new rom on the wizard. So....
Anyone have a fix yet? I hope so!!!
Oh, and for reference (to answer questions from other threads), my kaiser battery drains 4 to 5 times faster than the wizard in side by side use, and the kaiser definitely does not have a transflective screen while the wizard does... bummer. but the kaiser is tremednously faster!
1. Disconnect the device from your computer.
2. Try going to your device and select:
start->settings->connections->USB to PC.
3. Uncheck "enable advanced network functionality"
4. Reconnect the device.
Active Sync....
Hi,
You can try "PocketMirrorĀ® Professional 2.2.4 for Windows Mobile", its a pretty good syncronization tool, but it costs a few bucks...
I've been using the trial version of PocketMirror and must say its pretty good with my TYTN 2.
Regs,
The Reaper.
... my thoughts exactly
yeah, i tried the usb to pc option as well. even downloaded a cab from another thread that allowed me to choose rndis or usb mode. neither worked. I will probably use pocketmirror pro as well...
Hi, I just flashed a new ROM on my Orbit that works brilliantly, no issues at all, apart from the fact that the computer now doesn't see the device at all. Not even the blo-blong sound when you connect any USB device. The only thing I get connecting the cable is charging the battery. And if I start Active Sync on my Orbit I get the same message as mystic_nacho:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC"
I just tried an hard reset to try to fix the issue - no success..
Before flashing everything was fine..
Btw, my wife Diamond doesn't connect either, and it never did it: something related to the TouchFlo thing?
Any idea?
The ROM I flashed is
gullums TouchFlo2D beta 4
update
I found the Diamond 'Getting started disc' and installed the Windows Mobile resources tool...
The disc I have from the Orbit box is for Windows Mobile 5, I guess it's not worth to find it out and try...
Nothing changed, anyway.
update 2
Yesterday night out of the blue - while the Orbit was still connected to the pc - ActiveSync started to work... F. knows....
i had the same problem - sync was working fine and then stopped. what worked for me was to go to USB to PC under settings and uncheck "enable faster data syncronization".
hi,
i also had sync. problems in the past.
searched for months.. since i figured out that some registry entries on my PC where missing!
imported the mayor setting from my brothers PC and TADAAAAAA. problem solved.
search my threads and maybe you 've luck with my soloution!
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Have you recently used a memory cleaning Application like memmaid, Clear Temp, or SKTools? You might have cleaned out some important notification files, like repllog,exe that is used for activesync.
I had the same thing happen to me when I first used these cleaners. I had to do a hard reset on the phone to make it work again found out about the remedies listed below after the reset.
I have heard others were successful repairing these notification Queue's with MemMaid. You can hold your stylus on the repllog,exe notification, and a popup up will appear, asking you to Recreate ActiveSync, or rebuild notification Queue. I don't know if this feature is available in Clear Temp, or SK tools.
I've also heard of restoring activesync by unchecking all of the folders, syncing, and then adding each folder back to the list, one by one, until all is restored.
I too have just developed the same problem.
I have 2 TYTN II' one will sync fine the other wont.
It all went horribly wrong after I tried to install Wisbar and an Ipod theme, after I uninstalled it, cos it didn't work I found I could no longer sync with USB to PC and the sync option is greyed out on my phone. The phone will charge with some of my usb cables, but now even seems fussy about which cable will charge and some now won't.
I am given to wondering whether the usb connection on my Phone is the problem...everything else seems to be working fine.
I have even installed different ROMS via the memory card still the problem persists.
I would love someone to come up with a fix
**UPDATE**
Well I now have got it working, in my case I was right, the usb connection on the phone was to blame. I took it to a mobile repair shop, I told the guy that I thought it was faulty he took one look at it and said that I had a bent pin, he got a little tool out and teased it back into position, sure enough when I got home it worked fine so now I am able to sync again. Not sure how long it will last though.
**Update 2**
Failed again, at least I know what's wrong now.

Activsync doen't work properly

Hi,
I upgraded to several different versions of WM6.x (almost all above) but have the same problem. After UG I can't install any software through AS or browse the device with Explorer. Explorer shows no contents and the software screen opens but shows only a frame. I had the same problem with a Hermes and solved it by unchecking the extended network options in settings>connections>USB to PC but when I do that with the MDA II it freezes when I place it in the docking station. I then have to SR. I replaced the serialusbfn.dll with the one available on another post but AS will no longer recognize the device.
Any ideas? I've downgraded to WM2k3SE until I find something that works.
Btw, yes I did do a proper HR (n, yes,yes)
Cheers
First of all you need AS-4.5
If yes, check the settings in windows firewall.
If you are using some other firewall or virus guard, disable it temporarily.
Right click on AS icon in system tray & select Connection manager, enable USB.
Delete previous partnerships in AS.
Restart the PC & try to connect.
If it fails you can follow the diagnostic procedure which gives a error code, or possible cause. Check the error code with Microsoft web site.
You can also try to uninstall & reinstall AS
Hi,
I've tried all of that before (should have said so, b4). Here is a little more info:
I sync with 2 different computers, one at home (no network) and one at work (network). Both run WinXP Pro. I only have this problem with the work computer and only when WM6.x is intalled on a MDA II. The problem goes away when using WM2k3SE or when using a Hermes with WM6.x. Since the Hermes works without problem, I don't think it's the desktop.
Something causes the MDA to freeze when activesynce starts. Even the charging light stays on when I pull the unit out of the docking station. Backlight stays at full brightness and it doesn't go to sleep after a time. No buttons (even on/off) work. I can only SR.
Help!
Known problem
Read and try this:
http://forum.xda-developers.com/showthread.php?t=396081
Hi Muckelmaus,
thankx but I tried that. It causes the device to not be seen at all. I cradle it and nothing happens.
Cheers

Help! Problem with WMDC (No partnership)

After performing a ROM update and managing a few "finicky" syncs with exchange server info plugged in, I suddenly could not sync at all with WMDC. In fact, all I get is the "connecting" sign followed by a big red "X" and the word ERROR.....nothing else. No error number or anything....... there is no partnership established and when I click on set up new device partnerships, My Diamond shows up as a "Guest".
I can still browse the contents but I can't get it to sync at all! I am so annoyed with this.... its 6.30am and I can't walk away from it. Searched everywhere and only found a post from the Kaiser forum where someone seemed to have a similar problem. THere were no replies to that post.
Can someone help me? Things I have tried to do so far include going into "USB to PC" and unchecking the box that says " Enable advanced network functionality"...I have also tried uninstalling the drivers and reconnecting. Drivers seem to install fine but WMDC still gives that stupid error and no explanation whatsoever.

questions about connections

Hi
I'm new to this forum I hope you'll forgive me if I have asked something which has already been asked.
I have two problems with my xda11i after installing the rom with o2 programs removed.
firstly , every time I plug the unit onto the cradle it displays the following message
"Cannot connect with current connection settings. To change your connection settings tap settings"
I assume it means the USB connection, strangly it is already connected and am able to synchronise the xda, as well as add new files to the storage area. I guess it isn't doing any harm, but am just wondering why I'm getting this message.
The only connection i have entered is one for o2 gprs, oddly this is what my next question relates to.
I have entered the connection for GPRS manually, and this allows me to connect fine and browse the internet. but i used to be able click on the "G" icon at the top of the screen and go to "disconnect" - yet this option is no longer there. Any ideas?
Thank you for taking the time to read my message.
Kind Regards
Andrew

Categories

Resources