activesync via wifi - PDA2, XDA IIi, 2020i General

hello everybody...could you tell me if is possible to make a microsoft activesync via wi-fi with my XDAIIi???
thanks

It was possible with AS 3.8
Unforunately M$ took it out for AS 4 and I don't think they put it back in for the latest version.

Related

No ActiveSync after 2.16.9.x

Please help. I flashed 2.16.9.x and now ActiveSync doesn't work anymore, it connects all the time. PDA doesn't show activesync syncronization icon.
I tried to flash another versions of ROM, but it didn't help.
The problem may lie with the PC as opposed to the PDA. Have you tried a remove / re-install of AS4.1 on the PC?
Bebbo said:
The problem may lie with the PC as opposed to the PDA. Have you tried a remove / re-install of AS4.1 on the PC?
Click to expand...
Click to collapse
Of course I have. Even I tried on another computer.
vishny said:
Of course I have.
Click to expand...
Click to collapse
Fair enough, I was just trying to help. Perhaps if you had stated that in your original text I would not have provided such an "Obvious" answer. I will leave it up to others now to take guesses as to what you "might or might not have done"......
vishny said:
Please help. I flashed 2.16.9.x and now ActiveSync doesn't work anymore, it connects all the time. PDA doesn't show activesync syncronization icon.
I tried to flash another versions of ROM, but it didn't help.
Click to expand...
Click to collapse
Try to make your computer or laptop restore on earlier date then since it started. I had once this problem i don't know but sometimes it with the system files in computer missing then the problem occurs.
Although my ActiveSync works almost fine after the same rom-upgrade, I encounter its strange behaviour sometimes (rear, not always!) - PDA slows down to a crawl right after you disconnect it from a desktop PC (either USB or Bluetooth). It becomes so terribly slow that it takes 20-30 sec to draw the Comm-manager window! then you better soft-reset, then it works just fine. Why am I... to prove that ActiveSync 4.1 is not quite stable with new ROM version 2.16. There is a bug somewhere, and it has to be reported to i-Mate firmware writers.
Have you followed Microsoft rules about configuring firewalls for ActiveSync 4.1? Does it create a network connection 169.254.2.1 on a desktop PC?
Thank you guys, but I guess my case is harder:
1. I have firewall switched off. I didn't change any setting in computer. I just flashed new ROM.
2. I flashed my original ROM, but it didn't help.
3. I tried to sync on several computers and had the same result.
By the way I cannot return to original ipl/spl, I don't know how to do that.
Today I visited repairing service's office and they've prooved me my device is not broken, it synchronizes succesfully via USB on their computer. :shock:
So, the problem is related to my computer(s). If I'll find something I report in this thread.
it probably has to do with one of the cabs you installed that are on your original extrom or someone elses. Most people who have had problems after the upgrade on an 8125 (Cingular) have installed cingular cabs from the old rom. I had to to figure out the MMS configuration and after I foundthe one that did my activesync no longer worked. after a reflash and only installing some of the default cabs that came with the new rom and manually configuring the mms and gprs I don't have any problems at all.
well maybe it is the version of activesync we are using when this does happen.
I'm running the ROM that came with the Cingular 8125, and it does the same thing ... 1 in 10 times after disconnecting the device from the PC, the 8125 slows to a crawl, and the only way to recover is a soft-reset. 9 out of 10, it works fine.
OS ROM: 1.8.11.1 WWE
Radio: 01.09.11
Protocol: 4.0.13.20
not overclocked
soon to be ROM upgraded (hopefully)
ethorn said:
well maybe it is the version of activesync we are using when this does happen.
Click to expand...
Click to collapse
I use 4.1 for a long time.
I didn't install anything on my pda. It happens even after hard reset. I even tried to flash original rom. In all cases ActiveSync displays "Connecting...", pda even doesn't display sync icon.
I tried to sync with standalone notebook and it was successfull. I'm really shocked why pda cannot sync with my desktop(s). It seems to me it could happen after some windows unattendant updates or something, I'm still investigating...
I have Qtek 9100 and have installed rom 2.16.9 and i also have activesync 4.1 refusing connection to my pda. After some googling i have found this interesting site: http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x-connection.htm
I did cheks described there and found out that activesync doesnt have any network adapters and/or activity. USB driver installs, but it, again, doesnt generate anything. Maybe problem is there?
Ehhh... I even cannot return to any previous rom version, because there is no rapi for updaters to work with
reverting back to original cingular rom
How would you go back to original ROM using Lokiwiz tool if your active sync was working OK?
Thanks,
Each time I have done HARD RESET--I uninstalled active sync from my computer AFTER DELETING PARTNERSHIP. I deleted PC from Active sync on my 8125. I deleted all files on my computer related to active sync using search.
I then reinstalled active sync 4.1, being sure WINDOWS FIREWALL was off. I went thru all the steps with my TREND MICRO VIRUS PERSONAL FIREWALL EXCEPTIONS listed on http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
and I got it to work (1st install always takes time for calendar)
Hope that helps--it seems ridiculous to have redo all that-but so be it.
I'd like to know how to get back to CINGULAR ROM as I am still in 30 day return window.
Well there is a magical combination of buttons as described in http://forum.xda-developers.com/viewtopic.php?t=37386 (somewhere around 2-4 page):
Voice+Camera + Reset. Colored bootloader shows up. After that you can connect it to usb and run .exe with rom you want.
The problem with me is that i dont use any 3rd party firewall (i have hardware router for my connections)
reverting back to original cingular rom
You don't think there would be a problem going DOWN in ROM'S?
Do I need to UNLOCK again first?
I must confess. I did (i think veeery lucky) sucseded in running activesync. Altough what was the cause i cannot say. I reverted to 1.6.7 version of the rom. and reinstall everyting several times. and reboted several time. and i saying loud magical words. (and deleted checkpoint vpn software that i have installed). AND it worked!
Maybe trouble was in vpn soft, but it worked pre 4.1 activesync. So... Here is my experience.
Boki said:
I have Qtek 9100 and have installed rom 2.16.9 and i also have activesync 4.1 refusing connection to my pda. After some googling i have found this interesting site: http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x-connection.htm
I did cheks described there and found out that activesync doesnt have any network adapters and/or activity. USB driver installs, but it, again, doesnt generate anything. Maybe problem is there?
Ehhh... I even cannot return to any previous rom version, because there is no rapi for updaters to work with
Click to expand...
Click to collapse
Thank you very much for this link, it helped me to find the reason. It's not new ROM fault. The Microsoft Firewall Client (ISA 2000 component) on desktop blocks communication between PDA and desktop. I disabled it and now ActiveSync works fine.
Thank you again.
Your Are Welcome

Windows Mobile Device Center Final

The final version of WMDC was posted today. See the link below as the Windows Mobile Device Center Page hasn't been updated yet.
http://www.theunwired.net/?itemid=3591
Or download directly
Download x86 Version Here
http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&DisplayLang=en
Download x64 Version Here
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&DisplayLang=en
Please reply if you have any success syncing the blue angel.
Can someone please upload it or provide alternative link. I cant seem to download it directly from microsoft. Thanks
firebird said:
Please reply if you have any success syncing the blue angel.
Click to expand...
Click to collapse
Hi, did download (the latest on MS website), install and use it without any trouble. It found my exchange setting on my BA and applied them without even asking me! This was last night, will see what happens today!
@ daddy_yankee1980: It is an upgrade to Vista with all the verification required, so even if it is uploaded you will have to be online and connected to MS website (I think).
it is "Microsoft Windows Mobile Device Center Driver for Windows Vista"
not the app
All the beta branding is gone from the application too - so I think its both driver and app.
Maybe you are right, i wont use vista just yet they have to fix a lot of bugs until i start to use it daily
here is links for both builds
x86
amd64
I'm currently using the Helmi AKU3.5 1.4Beta with no sucess to be detected, what rom are you using ?
Are you running the final version of the WMDC ?
Still problems with Vista
I installed the Windows Vista Mobile Device Driver Update Final, but my MDA Vario I is not connected. It is not recognized anyway. Any ideas how to solve this issue?
Thanks.
Markus
RUU
I am using Vista with final WMDC released driver with O2 Atom.
I am able to properly sync. No problems. However I am not able to update the ROM. It goes upto the sensing screen to display the current ROM on device and to be updated ROM info. etc. In the next screen it hangs and after some time of about 1 minute the device update utility says that it is not able to update the device. I even disable the firewall to check if it is issue with firewall. But nope no help. I again checked it with windows xp and active sync v. 4.2 where everything works perfect so no issues with O2 atom.
Any help is appreciated.
SX66 WM5 synched successfully
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
I'm still not able to sync in Vista with WMDC. My BA is saying:
Connection Not Valid: unable to open the connection '`USB'. This Connection is no longer valid or does not exist. Select a different connection and try again.
Click to expand...
Click to collapse
I'm going to try a hard reset on my BA and see if thats the problem.
brandonm said:
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
Click to expand...
Click to collapse
Since I just installed WM5 on my SX66, I was unaware that AciveSync does not backup WM5 devices. I purchased Spb Backup and that works better anyways.
It Works
When I plugged my device in today, the system was able to find drivers. All is good now.

Can't connect to my pc!

I just want to connect so i can update to the newest swedish rom released.
And of course everything else
When i connect the usb to phone i get the alternatives "Activesync" or "disc-unit" or something like that.
I choose activesync.....it connects but after a few seconds it disconnects.
It will show up on my pc but just disconnects right after....it has always worked before.....i really don't know what to do.
Then i use the other alternative to connect.....it seems stable but it is extremely slow.....one mp3 at 3mb takes about 40minutes to upload to phone.
I have the "Official Update 1.37.401.3" installed but i want install the newer one.
Please help me.
My usb cords i have tried using is flawless....everything works.
Im running Vista Ultimate Retail.
Please help me through this ordeal....I'm almost at the point that I'm going tp buy another phone and leave htc forever
I really want this phone to work. It worked before actually...It might be when I updated with the Official Update 1.37.401.3 or exactly a few days after that my problems appeared.
REALLY NEED YOUR HELP XDA-PEOPLE!
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
poedgirl said:
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Click to expand...
Click to collapse
I don't know what bootloader is...sorry. And there was an older rom on the phone before i upgraded.
hms666 said:
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
Click to expand...
Click to collapse
Yes it is enabled.
Windows XP uses Active sync V.4.5.0
Windows Vista uses Windows Mobility center:
http://www.microsoft.com/windows/windows-vista/features/mobility-center.aspx
First check your advanced energy-settings (control panel, system)
To make sure put everything on 10 minutes, as these settings will reset as soon as your new (and faster 1.93) rom is installed.
Connect your phone and make sure you select the sync option, not the external disc option. Make a backup.
Then use an unsigned hard-spl if you have firmware 1.37 or higher. (signed won't work) http://forum.xda-developers.com/showthread.php?t=400950
When finished install the rom you like.
I Resolved It!
I managed to flash my phone with the new swedish official rom.
So I can connect now.
Thanx for helping me.
The problem seemed to be in Windows Vista...it wouldn't allow my HTC to keep beeing connected for too long
I resolved the problem on my other computer.
And I love the speed of the new rom by the way ...It gets better and better all the time.
Thanx again XDA Developers.
have same problem
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Chino68 said:
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Click to expand...
Click to collapse
I used my other computer (Win XP) to flash my htc diamond with the newest swedish rom...and now it will even work connecting to my vista computer.
Good luck with your phone

HSPL Help for AT&T Pure

I am new to the Topaz forums as I just got an AT&T pure and am wanting to start flashing. My battery is over 50%, I am using XP Pro, all my anti-virus is off. I have the device synced but when I try and run Topaz-HardSPL_V5_00R5, I get an Fatal Error that says " Please make sure the device is properly synced, Please retry after syncing the device (via Activesync or Windows Mobile Device Center). The USB cable is working because I installed pocket controller on it and that works fine.
Are you completely synced up with ActiveSync? I assume you have the latest version of activesync aswell. There should be no problem if you are synced up.
Try going to Settings>All Settings>Connections>USB to PC
Whe you get there make sure activesync is checked. Mebe also untick Enable faster data if it's ticked.
Not sure if thats the right way to get there for you as seeing as I have an unlocked D2 and a cooked ROM. But it may be something that simple.
HTC Touch Freak said:
Are you completely synced up with ActiveSync? I assume you have the latest version of activesync aswell. There should be no problem if you are synced up.
Try going to Settings>All Settings>Connections>USB to PC
Whe you get there make sure activesync is checked. Mebe also untick Enable faster data if it's ticked.
Not sure if thats the right way to get there for you as seeing as I have an unlocked D2 and a cooked ROM. But it may be something that simple.
Click to expand...
Click to collapse
Thanks man. I finally installed the cab file on the device itself then it worked. Now to flash and hopefully cook
No problem.

[Q] hp ipaq 6515 cannot connect to activesync

i get this error when i tried to connect to my phone
cannot verify the version of activesync on your device.a program such as firewall may be blocking a port activesync uses to connect to the device,or you may need to upgrade to a more recent version of activesync on your pc
but am using active sync 4.5 version
pls i need help its urgent

Categories

Resources