i get this error when i tried to connect to my phone
cannot verify the version of activesync on your device.a program such as firewall may be blocking a port activesync uses to connect to the device,or you may need to upgrade to a more recent version of activesync on your pc
but am using active sync 4.5 version
pls i need help its urgent
Related
I buy an HTC P3600 at second-hand, and I don`t have usb driver for Windows XP, my phone version is WM 5.1.465, can anyone help me with driver pls?
No driver needed.
there's no driver needed when you connect your ppc to the pc, however you need to install the microsoft's ActiveSync software to be able to synchronize your ppc with pc...
you can find more information and download activesync here: http://www.microsoft.com/windowsmobile/activesync/default.mspx
Hi,
i have upgraded to WM6 to Tofclock's version and all was fine, now i cannot sync with either of my PC's running XP and Vista. i get a "device not recoginsed" error message and my Himalaya has locked up?? is there another way of going back to WM2003 ?
any help would be greatly appreicated.
You have a activesync 4.5 ???
problems!!
i am using active sync on my laptop running XP and i've tried windows mobile device center on my PC running Vista. if i thought it would work i'd hook up my himalaya to my Wii..... ?
try going to settings>connections>USB to PC and enable the option if it isnt n if it is try disabling it.
make sure u are connecting ur USB cable directly to ur PC not via a hub..also make sure if ur Connector is soldered in the right place..maybe its broken or moving..some times i also get this type of error..try to softreset also and restart ur windows too
problems !!
thanks guys all sorted, it was the "usb to pc" link that was unticked.
thanks again
Hi,
I have a TyTN II, and I can not connect to my PC XP SP3 (even with Vista), I installed ActiveSync 4.5, which is not detected automatically, and the USB cable is only charge the battery .
Also for bluetooth not it is possible to create a PAN network , that this is a hardware problem?
Here is the ROM informations :
ROM version: 4.30's Schaps
ROM Date: 08/28/07
Radio version: 1.27.12.11
Protocol version: 22.45.88.07H
I have done a Hard Reset and a soft reset and it works yet.
In Bootloader mode, when I plug the USB, i have always "Serial" at the screen.
I really need because I use it primarily with Visual Studio, and without synchronization with ActiveSync, I can do nothing !
I've tried to flash my Kaiser using microSD Card , but i need HardSPL on my device , witch require ActiveSync
Many thanks .
Sorry for my bad English , I'm not a native speaker....
Hello,
With XP SP3, try removing the all existing partnerships on the Phone and PC and then try connecting...(on the phone.. start>programs>activesync>menu>options>delete, likewise, delete the partnership on the PC)
On vista you need WMDC , activesync will not work...
Hope this helps...
Hi,
Thanks for the answer, I found the solution :
I was using USB cable of my memory card Reader, I tried with another (Sony HandyCam original USB cable) , and it works like a charm under XP and Vista ( Microsoft Windows Mobile Device Center )
I hope this will help someone.
Thanks again.
Hello everyone, I have a problem with my HTC Kaiser II with WM 6.1 features:
- Version ROM : 3.29.408.0 ITA
- Date of ROM : 05/07/08
- Version of RADIO: 1.65.16.25
- Version of product: 25.83.40.02H
The OS PC used is Windows XP Professional, use Activesync to connect.
I had problems with my Kayser and I had to do a hard reset on it. Now when I connect it to the PC does not recognize it and show the following message "USB Device Not Recognized". Previously I could connect it to my PC.
I have uninstalled and reinstalled ActiveSync but the problem remains
Can someone help me.
pappesca said:
Hello everyone, I have a problem with my HTC Kaiser II with WM 6.1 features:
- Version ROM : 3.29.408.0 ITA
- Date of ROM : 05/07/08
- Version of RADIO: 1.65.16.25
- Version of product: 25.83.40.02H
The OS PC used is Windows XP Professional, use Activesync to connect.
I had problems with my Kayser and I had to do a hard reset on it. Now when I connect it to the PC does not recognize it and show the following message "USB Device Not Recognized". Previously I could connect it to my PC.
I have uninstalled and reinstalled ActiveSync but the problem remains
Can someone help me.
Click to expand...
Click to collapse
try using another usb cable, uninstall and reinstall ActiveSync, do not enable a firewall on your PC ....
I tried using another usb cable, uninstalled and reinstalled ActiveSync. I tried another to do a hard reset on it but the problem remains.
Thanks for your time
pappesca said:
I tried using another usb cable, uninstalled and reinstalled ActiveSync. I tried another to do a hard reset on it but the problem remains.
Thanks for your time
Click to expand...
Click to collapse
maybe you need update HTC USB Sync Drivers look method update in Win XP ---> http://forum.xda-developers.com/showpost.php?p=3932818&postcount=2
I can not do what is mentioned in post at some point show the message "no information for the device"
hi .... i have the same problem , please help me if you solved the problem thx
pappesca said:
Hello everyone, I have a problem with my HTC Kaiser II with WM 6.1 features:
- Version ROM : 3.29.408.0 ITA
- Date of ROM : 05/07/08
- Version of RADIO: 1.65.16.25
- Version of product: 25.83.40.02H
The OS PC used is Windows XP Professional, use Activesync to connect.
I had problems with my Kayser and I had to do a hard reset on it. Now when I connect it to the PC does not recognize it and show the following message "USB Device Not Recognized". Previously I could connect it to my PC.
I have uninstalled and reinstalled ActiveSync but the problem remains
Can someone help me.
Click to expand...
Click to collapse
In case you use Fast data synchronization uncheck that option in connection USB TO PC and connect usb cable.
I'm trying to flash a ROM on to my HTC HD7 and I am having a problem when I try to establish an Activesync connection with my phone. I have HSPL all set up on my device (an unlocked T-mobile HD7 on Rogers) the phone OS version is 7.0.7004.0 and my bootloader version is 3.1.2250.0(119314).
I have tried to soft-reset, hard-reset etc. and these things haven't worked. When I run Task 29 I get to the part where it tries to verify if I have an active connection with Activesync (or Sync Center or whatever) and it fails to work. I have a Windows 7 32-bit computer. I have checked my flash versions, .net framework version and everything in between, nothing seems to be wrong and can't figure it out!
If anyone can help me establish a connection with the Sync Center I would be very grateful.
Thanks!