Hi,
i have upgraded to WM6 to Tofclock's version and all was fine, now i cannot sync with either of my PC's running XP and Vista. i get a "device not recoginsed" error message and my Himalaya has locked up?? is there another way of going back to WM2003 ?
any help would be greatly appreicated.
You have a activesync 4.5 ???
problems!!
i am using active sync on my laptop running XP and i've tried windows mobile device center on my PC running Vista. if i thought it would work i'd hook up my himalaya to my Wii..... ?
try going to settings>connections>USB to PC and enable the option if it isnt n if it is try disabling it.
make sure u are connecting ur USB cable directly to ur PC not via a hub..also make sure if ur Connector is soldered in the right place..maybe its broken or moving..some times i also get this type of error..try to softreset also and restart ur windows too
problems !!
thanks guys all sorted, it was the "usb to pc" link that was unticked.
thanks again
Related
Anyone got any problem when upgrading Rom on WIndows Vista and using the Windows Mobile Device Center instead of the traditional ActiveSync? It won't seems to connect to the device again once the device is restarted into the RGB screen [after the starting the Rom upgrade process]. After a few seconds, it got the connection error code on your PC. I soft reset the device and no upgrade has been installed. Any ideas?
I try removing the connect via USB check box and use Mtty to check the connections to my device. But after I have done that, the PC won't connect my device to my computer at all... hence, I can't get use Mtty to check the connections.
So I have no idea why this is happening on Vista. It works fine when I am using my old XP computer when I upgrade to the test ROM. Any suggestions will be appriciated. Thanks a lot of your help in advance.
Pete
http://www.modaco.com/Upgrading-to-Vista-Be-aware-RUUs-wonand39t-work-t251768.html
Looking to upgrade to Windows Vista? You might just want to keep an XP partition on your machine, as ROM upgrades via the normal RUU client do NOT work from within Vista, due to changes in the way the OS accesses the device. This also prevents IMEI-check unlocks from working on Vista.
Click to expand...
Click to collapse
Problem lies with vista, but I have read somewhere a solution is underway, or allready here...
Hi..huge problem here...
..I've been uisng Faria for about a week....very nice ROM...but yesterday i installed CheckNotification (for deleting old/duplicate niotifications..) and my AS stop working...
I tried mayn things from this forum..from switching to "COM connection" with USB switch, unchekd/checked USB to PC option....but nothing help.
When i cradle my Qtek 9100, ActiveSync detect phone...and status Synchronizing is in ActiveSync........but when it gotta be synchroniezd there is an error : ActiveSync cannot connect to the Windows Mobile Device...
I've even tried switch to USB mode (softreset+rec button) to make new ROM install from beginig, but I can't...i get error... ERROR 260 Update Error.
I'm not shure that CheckNotification software is guilty for all that..buw, before it's installation everything worked OK.
I noticed a few things..
when i cradle phone and my ActiveSync is in status Synchornizing...there is no sync sign on ma PDA in Start line as usually
my Contacts dissapeard
my Tasks/Appointments dissapeard..
I hope...i didnt' fuc*** up my PDA.
Any help? Please.....
Thank U very much!
Luka
akulp said:
Hi..huge problem here...
..I've been uisng Faria for about a week....very nice ROM...but yesterday i installed CheckNotification (for deleting old/duplicate niotifications..) and my AS stop working...
I tried mayn things from this forum..from switching to "COM connection" with USB switch, unchekd/checked USB to PC option....but nothing help.
When i cradle my Qtek 9100, ActiveSync detect phone...and status Synchronizing is in ActiveSync........but when it gotta be synchroniezd there is an error : ActiveSync cannot connect to the Windows Mobile Device...
I've even tried switch to USB mode (softreset+rec button) to make new ROM install from beginig, but I can't...i get error... ERROR 260 Update Error.
I'm not shure that CheckNotification software is guilty for all that..buw, before it's installation everything worked OK.
I noticed a few things..
when i cradle phone and my ActiveSync is in status Synchornizing...there is no sync sign on ma PDA in Start line as usually
my Contacts dissapeard
my Tasks/Appointments dissapeard..
I hope...i didnt' fuc*** up my PDA.
Any help? Please.....
Thank U very much!
Luka
Click to expand...
Click to collapse
i had the same problem and i did the following and solved the problem:
1. uninstall outlook (2003 or 2007 or other)
2. uninstall active sync
and after that reset computer and hen install
1. outlokk
2. install activesync
and u r donw. U can backup outlook files or sync again !! but it will solve the problem because sometimes he active sync misses up with exchange seerver and doing the following steps will solve the problems !!
I already tried that...i even trie updating from bootloader from other comp...but nothing....can I update ROM from SD?..and how ?
My Blue Angel Activsyn Is Not Recognized By The Pc For A Reason I Do Not Know , Tried Many Times Hard Reset Soft Reset , Mtty Tool
Bootloader Mode Nothing Is Working If Any One Has An Idea How Can I Upgrade Or Even Re Falsh The Same Rom I Will Appreciate It Thanks
mohannad18 said:
My Blue Angel Activsyn Is Not Recognized By The Pc For A Reason I Do Not Know , Tried Many Times Hard Reset Soft Reset , Mtty Tool
Bootloader Mode Nothing Is Working If Any One Has An Idea How Can I Upgrade Or Even Re Falsh The Same Rom I Will Appreciate It Thanks
Click to expand...
Click to collapse
You MUST flash via sync, there is no method available to flash from SD card. Are you using XP or Vista? There is a known issue with Vista not liking the BA. Are you manually putting the BA into bootloader mode then placing in the cradle or trying to do it some other way? The method that works 100% for me is to manually put in bootloader mode (power+reset+record), this gives me a screen that says Serial at the top and a version number at the bottom, there is no backlight and when I then place it into the cradle Serial changes to USB. At this point on the computer run MA_Upgrade and everything should work. Keep in mind that I will never use Vista so if you are the YMMV.
will i could manually go to bootloader mode but the time i place device on cradle " unknown device" appears and running the maupgrade.exe leads to blank upgrade rom version several times i have done it ??? any suggestions
i have windows xp , activsyn 4.5 , bootloader ver 2.06
mohannad18 said:
will i could manually go to bootloader mode but the time i place device on cradle " unknown device" appears and running the maupgrade.exe leads to blank upgrade rom version several times i have done it ??? any suggestions
i have windows xp , activsyn 4.5 , bootloader ver 2.06
Click to expand...
Click to collapse
As silly as this sounds, try a different USB port. Also make sure you are directly connected to the computer not via a USB hub.
tried more than one computer for connection and more than 4 ports still i got the same " usb device not recognized"
mohannad18 said:
tried more than one computer for connection and more than 4 ports still i got the same " usb device not recognized"
Click to expand...
Click to collapse
Try a different cradle/cable.
The time I had this exact problem, it turned out of be a broken wire in the data cable.
i bought another cradle still i hvae the same message " usb device is not recognised"
Hrmm... I'm going to throw out a few ideas to look at. Some probably don't apply since you tried this on another machine, per your post, but it can't hurt in regards to this issue...
Try uninstalling activesync, reboot, reinstall, reboot. The 'drivers' that are used are installed with activesync.
If you have any 3rd party USB drivers, try reinstalling them.
Disable 'advanced network functionality' on the phone
Backup your phone and hard reset
Do you have anything that monitors the USB port on the machine you are trying to do this on?
Make sure you are using activsync 4.5 or newer. Other than that and what you already read here I can think of nothing.
i have tried so many versions of activesyn 3.x-4.5 with reboot each time of installation ,advanced network diabled, still the same thing " usb device not recognized"
sorry for inconvenience what is usb moniter machine??
BA - Does the activesync (3x-4.5) - work via bluetooth 4 U/G's ?
Angel - Does the activesync's (3x-4.5) - work via bluetooth 4 U/G's?
(no cradle / no usb) , but file transfere's work ok, via BT exchange folder (paired)
for running the ====#====#===#XDATools#==#=== & the #====#====#====#special_rom_1.2.exe#==#
angel of the ph20b
1.31.00 wwe
rom 12/13/04
1.06.00FM
1337.38,
ext rom 1.31.139wwe - flavours
my BlueTooth is belkin F8T008 (belkin say it uses comm4) - (BlueAngel say it uses - in comm5 / out comm 6), & activesync4.5 says (no-way, even adding ports, then removing all under comm9 etc)
(if I could run them from midlet, from sd say )
ASK B4 U TRY ??? (101/Flash4dummies/NewbiesTube . . . .YouNube? where ()not the wiki() - Im getting to be a silver surfer, already!
followed a few tutorials, none look like my sp3, on xp-pro, I also have no outlook, etc (no excel, - NO office!), but I only came for a soft-key fix/addon = 4midlet's)
tried removing the pair'ings from regedit(then regclean). Oh and when running activesync from BA, I cannot even get a PC (discoverable 'n all devices 'n all services ect
and breathe!
Oh and any reply's would be gratefully received, B4 '2010', that is -
shame the bolt that was shot, was just too soon, so no score for the aim, though! -
usb activesync problem
usb activesync problem
ignore the previous post - cannot connect to activesync via bluetooth!
radio upgrade worked !!!!!!!!!!!!!!!!!!!!!!!!!!!
special_rom_1.2.exe, unzipped to a xdatools folder
running start.bat, after activesync's finnished sync-ing
in the dos window I get a get device error
and
error 011:execute remote comms prog error
I'm VNese, my level of Eng is poor. but I think u should check your USB port. Do u use full of usb port? may be, the power in USB port is low -> error. Or hardware(USB chip) is bad. check more
Shot in the dark but I had the same problem with a friends 6700. I found out that the antivirus/firewall/internet security suite was blocking the proper ports needed to connect. When I disabled the software for a moment, attempted a sync it would work, then I could turn the software back on and be fine. If I disconnected and reconnected it would only charge. Give that a whirl.
Hello guys/girls
I read about the "ROMS" just yesterday and I want to
try it to. But when I try to HARD_SPL my X1 it goes wrong.
When I hook up my X1 with the pc the windows mobile device center
just doesn't recognize the phone. I did turn activesync 'on' on the phone.
But WMDC just keeps saying 'not connected.
I work with Windows 7. Might that be a problem??
Please help me. I want to join the fun of a X1
AlfaJoker said:
Hello guys/girls
I read about the "ROMS" just yesterday and I want to
try it to. But when I try to HARD_SPL my X1 it goes wrong.
When I hook up my X1 with the pc the windows mobile device center
just doesn't recognize the phone. I did turn activesync 'on' on the phone.
But WMDC just keeps saying 'not connected.
I work with Windows 7. Might that be a problem??
Please help me. I want to join the fun of a X1
Click to expand...
Click to collapse
hi you should try to reinstall the driver's for the phone so the pc can pic it up ! because you have changed the spl ITS A DIFFERENT SIGNAL GOING OUT TO THE PC !!
IF THIS FAILS !! in this forum is the s/e offical rom APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010 LOAD THE kovsimg.nbh DIRECT TO YOUR MEMORY CARD
turnerhall said:
hi you should try to reinstall the driver's for the phone so the pc can pic it up ! because you have changed the spl ITS A DIFFERENT SIGNAL GOING OUT TO THE PC !!
IF THIS FAILS !! in this forum is the s/e offical rom APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010 LOAD THE kovsimg.nbh DIRECT TO YOUR MEMORY CARD
Click to expand...
Click to collapse
DOWNLOAS THE ROM YOU WANT DIRECT TO YOUR MEMORY CARD VIA CARD READER OR GO INTO SYSTEMS CONNECTION -USBTOPC AND CHARGE SETTING TO DISK DRIVE !! after thats done remove battery you maye have to rename the download kovsimg.nbh !1 pot phone in flash mode ie holding power button and down volume button after yoou put back the battery
try turn off "enable faster data connection" on youre phone.
settings>connections>usb-to-pc
Try switching USB ports. Sometimes my USB hub doesn't work and I have to use the ports on my computer.
Your usb port might not be providing enough power. My desktop has a P45-UD3P motherboard and those ports don't recognise the X1, but my laptop (HP 6930p) does. I need to use one of those two-port usb cables to get my desktop to work with the phone.
Did you try selecting "End a partnership" via Windows Mobile Device Center and then try connecting your device again? I've always had connection problems when flashing my phone and this method works 100% of the time Aloha for now.
and don't use usb hub
Hi, I've an Ba with WM6.5 in it. But when I want to reflash it, the BA wasn't detected by my computer. I've put it into the bootloader mode, but it just shows Serial, even I've waiting for almost 2 hours. But when I boot the OS, it can connected to the PC via ActiveSync. What's going on here?? Is my BA or my cradle broken??
are you running XP if so open CTRL ALT DEL then look for wscesscom or somthing and end task and then WcessMgr OR somthing and end task and try
You should see Troubleshooting in the WIKI ~ http://forum.xda-developers.com/wiki/ActiveSync
I've done all of that, but still not working. I think it's not in the activesync, because I can connect my BA to the PC, the problem looks like in the bootloader mode.... It just standing there shows "serial" and "V2.07", even I've connect it to the USB port... Any ideas??
Is there are any possibility I can repair my bootloader (if it's really broken)??, or Can I reflash my BA with other way around?? Without using the bootloader maybe??
UPDATE:
Later, I think I began to recognize the problem...
In every tutorial for Win7 that I read (this tutorial and d-two's tutorial), I was ask to update the driver of "Microsoft USB Sync". But in my case, that "Microsoft USB Sync" wasn't shown. I think it's because I haven't sync my BA with the PC yet (I've just reinstall my Windows, so all of the setting is gone). If you sync your BA, you will get the "Microsoft USB Sync" on your device manager.
But now, the problem is, I can't sync my BA with the PC, because of error in my PIM (Contact, Calendar, Task, Phone, Messages, etc). I only able to explore my devices through ActiveSync/Windows Mobile Device Center, not synchronize it. Even my ActiveSync/WMDC shows an error on the connection. So, I can't update/install the driver for "Microsoft USB Sync", because my BA have an error connection with the PC. Any ideas to solve it??
And would cloning method worked for my devices?? I mean, I get a cloning from another BA, install it in my BA, and then repeat the reflash process with my preferred ROM??
Please, need help over here....
try a hard reset
Broken Power Switch ...
Dear experts,
My device is PDA2K, last week i did upgrad from original windows to WM6.5 Pro_QVGA, Radio 1.12.00 ...... but the power switch is broken
..... as your experience how did that happened!!!! it was on cradle connected to WinXP, but since that day i'm trying to do flashing to install another Windows ...... i failed ...
Please Please Please .... Help me to do flashing or formating from pc or sd card ... because i'll never get into bootloader in my life.
Thank you ...