Problem with USB and Bluetooth [ActiveSync] - Tilt, TyTN II, MDA Vario III General

Hi,
I have a TyTN II, and I can not connect to my PC XP SP3 (even with Vista), I installed ActiveSync 4.5, which is not detected automatically, and the USB cable is only charge the battery .
Also for bluetooth not it is possible to create a PAN network , that this is a hardware problem?
Here is the ROM informations :
ROM version: 4.30's Schaps
ROM Date: 08/28/07
Radio version: 1.27.12.11
Protocol version: 22.45.88.07H
I have done a Hard Reset and a soft reset and it works yet.
In Bootloader mode, when I plug the USB, i have always "Serial" at the screen.
I really need because I use it primarily with Visual Studio, and without synchronization with ActiveSync, I can do nothing !
I've tried to flash my Kaiser using microSD Card , but i need HardSPL on my device , witch require ActiveSync
Many thanks .
Sorry for my bad English , I'm not a native speaker....

Hello,
With XP SP3, try removing the all existing partnerships on the Phone and PC and then try connecting...(on the phone.. start>programs>activesync>menu>options>delete, likewise, delete the partnership on the PC)
On vista you need WMDC , activesync will not work...
Hope this helps...

Hi,
Thanks for the answer, I found the solution :
I was using USB cable of my memory card Reader, I tried with another (Sony HandyCam original USB cable) , and it works like a charm under XP and Vista ( Microsoft Windows Mobile Device Center )
I hope this will help someone.
Thanks again.

Related

Problems!!

Hi,
i have upgraded to WM6 to Tofclock's version and all was fine, now i cannot sync with either of my PC's running XP and Vista. i get a "device not recoginsed" error message and my Himalaya has locked up?? is there another way of going back to WM2003 ?
any help would be greatly appreicated.
You have a activesync 4.5 ???
problems!!
i am using active sync on my laptop running XP and i've tried windows mobile device center on my PC running Vista. if i thought it would work i'd hook up my himalaya to my Wii..... ?
try going to settings>connections>USB to PC and enable the option if it isnt n if it is try disabling it.
make sure u are connecting ur USB cable directly to ur PC not via a hub..also make sure if ur Connector is soldered in the right place..maybe its broken or moving..some times i also get this type of error..try to softreset also and restart ur windows too
problems !!
thanks guys all sorted, it was the "usb to pc" link that was unticked.
thanks again

Ba Upgrade Via Sd Card Or Bluetooth

My Blue Angel Activsyn Is Not Recognized By The Pc For A Reason I Do Not Know , Tried Many Times Hard Reset Soft Reset , Mtty Tool
Bootloader Mode Nothing Is Working If Any One Has An Idea How Can I Upgrade Or Even Re Falsh The Same Rom I Will Appreciate It Thanks
mohannad18 said:
My Blue Angel Activsyn Is Not Recognized By The Pc For A Reason I Do Not Know , Tried Many Times Hard Reset Soft Reset , Mtty Tool
Bootloader Mode Nothing Is Working If Any One Has An Idea How Can I Upgrade Or Even Re Falsh The Same Rom I Will Appreciate It Thanks
Click to expand...
Click to collapse
You MUST flash via sync, there is no method available to flash from SD card. Are you using XP or Vista? There is a known issue with Vista not liking the BA. Are you manually putting the BA into bootloader mode then placing in the cradle or trying to do it some other way? The method that works 100% for me is to manually put in bootloader mode (power+reset+record), this gives me a screen that says Serial at the top and a version number at the bottom, there is no backlight and when I then place it into the cradle Serial changes to USB. At this point on the computer run MA_Upgrade and everything should work. Keep in mind that I will never use Vista so if you are the YMMV.
will i could manually go to bootloader mode but the time i place device on cradle " unknown device" appears and running the maupgrade.exe leads to blank upgrade rom version several times i have done it ??? any suggestions
i have windows xp , activsyn 4.5 , bootloader ver 2.06
mohannad18 said:
will i could manually go to bootloader mode but the time i place device on cradle " unknown device" appears and running the maupgrade.exe leads to blank upgrade rom version several times i have done it ??? any suggestions
i have windows xp , activsyn 4.5 , bootloader ver 2.06
Click to expand...
Click to collapse
As silly as this sounds, try a different USB port. Also make sure you are directly connected to the computer not via a USB hub.
tried more than one computer for connection and more than 4 ports still i got the same " usb device not recognized"
mohannad18 said:
tried more than one computer for connection and more than 4 ports still i got the same " usb device not recognized"
Click to expand...
Click to collapse
Try a different cradle/cable.
The time I had this exact problem, it turned out of be a broken wire in the data cable.
i bought another cradle still i hvae the same message " usb device is not recognised"
Hrmm... I'm going to throw out a few ideas to look at. Some probably don't apply since you tried this on another machine, per your post, but it can't hurt in regards to this issue...
Try uninstalling activesync, reboot, reinstall, reboot. The 'drivers' that are used are installed with activesync.
If you have any 3rd party USB drivers, try reinstalling them.
Disable 'advanced network functionality' on the phone
Backup your phone and hard reset
Do you have anything that monitors the USB port on the machine you are trying to do this on?
Make sure you are using activsync 4.5 or newer. Other than that and what you already read here I can think of nothing.
i have tried so many versions of activesyn 3.x-4.5 with reboot each time of installation ,advanced network diabled, still the same thing " usb device not recognized"
sorry for inconvenience what is usb moniter machine??
BA - Does the activesync (3x-4.5) - work via bluetooth 4 U/G's ?
Angel - Does the activesync's (3x-4.5) - work via bluetooth 4 U/G's?
(no cradle / no usb) , but file transfere's work ok, via BT exchange folder (paired)
for running the ====#====#===#XDATools#==#=== & the #====#====#====#special_rom_1.2.exe#==#
angel of the ph20b
1.31.00 wwe
rom 12/13/04
1.06.00FM
1337.38,
ext rom 1.31.139wwe - flavours
my BlueTooth is belkin F8T008 (belkin say it uses comm4) - (BlueAngel say it uses - in comm5 / out comm 6), & activesync4.5 says (no-way, even adding ports, then removing all under comm9 etc)
(if I could run them from midlet, from sd say )
ASK B4 U TRY ??? (101/Flash4dummies/NewbiesTube . . . .YouNube? where ()not the wiki() - Im getting to be a silver surfer, already!
followed a few tutorials, none look like my sp3, on xp-pro, I also have no outlook, etc (no excel, - NO office!), but I only came for a soft-key fix/addon = 4midlet's)
tried removing the pair'ings from regedit(then regclean). Oh and when running activesync from BA, I cannot even get a PC (discoverable 'n all devices 'n all services ect
and breathe!
Oh and any reply's would be gratefully received, B4 '2010', that is -
shame the bolt that was shot, was just too soon, so no score for the aim, though! -
usb activesync problem
usb activesync problem
ignore the previous post - cannot connect to activesync via bluetooth!
radio upgrade worked !!!!!!!!!!!!!!!!!!!!!!!!!!!
special_rom_1.2.exe, unzipped to a xdatools folder
running start.bat, after activesync's finnished sync-ing
in the dos window I get a get device error
and
error 011:execute remote comms prog error
I'm VNese, my level of Eng is poor. but I think u should check your USB port. Do u use full of usb port? may be, the power in USB port is low -> error. Or hardware(USB chip) is bad. check more
Shot in the dark but I had the same problem with a friends 6700. I found out that the antivirus/firewall/internet security suite was blocking the proper ports needed to connect. When I disabled the software for a moment, attempted a sync it would work, then I could turn the software back on and be fine. If I disconnected and reconnected it would only charge. Give that a whirl.

Upgrading to WM6.5 on XDA IIs - Error 150 Maupgrade

Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!
please add which rom you currently use, do you have activesync installed
Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !
Sorry !
Yes I have Activesync installed (for another palmsize divice).
What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.
Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.
night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.
Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.
you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync
Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.
For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5

Connection problem HTC Kayser II with ActiveSync and

Hello everyone, I have a problem with my HTC Kaiser II with WM 6.1 features:
- Version ROM : 3.29.408.0 ITA
- Date of ROM : 05/07/08
- Version of RADIO: 1.65.16.25
- Version of product: 25.83.40.02H
The OS PC used is Windows XP Professional, use Activesync to connect.
I had problems with my Kayser and I had to do a hard reset on it. Now when I connect it to the PC does not recognize it and show the following message "USB Device Not Recognized". Previously I could connect it to my PC.
I have uninstalled and reinstalled ActiveSync but the problem remains
Can someone help me.
pappesca said:
Hello everyone, I have a problem with my HTC Kaiser II with WM 6.1 features:
- Version ROM : 3.29.408.0 ITA
- Date of ROM : 05/07/08
- Version of RADIO: 1.65.16.25
- Version of product: 25.83.40.02H
The OS PC used is Windows XP Professional, use Activesync to connect.
I had problems with my Kayser and I had to do a hard reset on it. Now when I connect it to the PC does not recognize it and show the following message "USB Device Not Recognized". Previously I could connect it to my PC.
I have uninstalled and reinstalled ActiveSync but the problem remains
Can someone help me.
Click to expand...
Click to collapse
try using another usb cable, uninstall and reinstall ActiveSync, do not enable a firewall on your PC ....
I tried using another usb cable, uninstalled and reinstalled ActiveSync. I tried another to do a hard reset on it but the problem remains.
Thanks for your time
pappesca said:
I tried using another usb cable, uninstalled and reinstalled ActiveSync. I tried another to do a hard reset on it but the problem remains.
Thanks for your time
Click to expand...
Click to collapse
maybe you need update HTC USB Sync Drivers look method update in Win XP ---> http://forum.xda-developers.com/showpost.php?p=3932818&postcount=2
I can not do what is mentioned in post at some point show the message "no information for the device"
hi .... i have the same problem , please help me if you solved the problem thx
pappesca said:
Hello everyone, I have a problem with my HTC Kaiser II with WM 6.1 features:
- Version ROM : 3.29.408.0 ITA
- Date of ROM : 05/07/08
- Version of RADIO: 1.65.16.25
- Version of product: 25.83.40.02H
The OS PC used is Windows XP Professional, use Activesync to connect.
I had problems with my Kayser and I had to do a hard reset on it. Now when I connect it to the PC does not recognize it and show the following message "USB Device Not Recognized". Previously I could connect it to my PC.
I have uninstalled and reinstalled ActiveSync but the problem remains
Can someone help me.
Click to expand...
Click to collapse
In case you use Fast data synchronization uncheck that option in connection USB TO PC and connect usb cable.

[Q] Can't Change to USB?? Need Help ASAP!!!

Hi, I've an Ba with WM6.5 in it. But when I want to reflash it, the BA wasn't detected by my computer. I've put it into the bootloader mode, but it just shows Serial, even I've waiting for almost 2 hours. But when I boot the OS, it can connected to the PC via ActiveSync. What's going on here?? Is my BA or my cradle broken??
are you running XP if so open CTRL ALT DEL then look for wscesscom or somthing and end task and then WcessMgr OR somthing and end task and try
You should see Troubleshooting in the WIKI ~ http://forum.xda-developers.com/wiki/ActiveSync
I've done all of that, but still not working. I think it's not in the activesync, because I can connect my BA to the PC, the problem looks like in the bootloader mode.... It just standing there shows "serial" and "V2.07", even I've connect it to the USB port... Any ideas??
Is there are any possibility I can repair my bootloader (if it's really broken)??, or Can I reflash my BA with other way around?? Without using the bootloader maybe??
UPDATE:
Later, I think I began to recognize the problem...
In every tutorial for Win7 that I read (this tutorial and d-two's tutorial), I was ask to update the driver of "Microsoft USB Sync". But in my case, that "Microsoft USB Sync" wasn't shown. I think it's because I haven't sync my BA with the PC yet (I've just reinstall my Windows, so all of the setting is gone). If you sync your BA, you will get the "Microsoft USB Sync" on your device manager.
But now, the problem is, I can't sync my BA with the PC, because of error in my PIM (Contact, Calendar, Task, Phone, Messages, etc). I only able to explore my devices through ActiveSync/Windows Mobile Device Center, not synchronize it. Even my ActiveSync/WMDC shows an error on the connection. So, I can't update/install the driver for "Microsoft USB Sync", because my BA have an error connection with the PC. Any ideas to solve it??
And would cloning method worked for my devices?? I mean, I get a cloning from another BA, install it in my BA, and then repeat the reflash process with my preferred ROM??
Please, need help over here....
try a hard reset
Broken Power Switch ...
Dear experts,
My device is PDA2K, last week i did upgrad from original windows to WM6.5 Pro_QVGA, Radio 1.12.00 ...... but the power switch is broken
..... as your experience how did that happened!!!! it was on cradle connected to WinXP, but since that day i'm trying to do flashing to install another Windows ...... i failed ...
Please Please Please .... Help me to do flashing or formating from pc or sd card ... because i'll never get into bootloader in my life.
Thank you ...

Categories

Resources