Did the unlock thing / WM 2005 upgrade / radio / patchesand everthing yesterday patched and happy , could send text and make calls
sometime today it all went pete tong and I lost the ability to make a connection , is there an easy fix or do i start again ??
Have tried with 02 and vodaphone sims and sims work in another phone
Device Data is P H 2 0 B W W E AT%CID? 5 . 0 3 . 0 2 1.13.00 % 4
Have reflashed the radio and rom , can send and receive sms but cannot make any calls
icon shows I have a phone signal
Darwin said:
Have reflashed the radio and rom , can send and receive sms but cannot make any calls
icon shows I have a phone signal
Click to expand...
Click to collapse
Hi m8 I have the same issue sort of. Can you check to see if the imie number of the phone has changed ? Mine screwed up after flashing the phone and im the same as you . I can send and recieve SMS but cant make or recieve calls ?????
IMEI number has not changed
Related
V1.32.251.1 RUU: v3.13.0.0
Radio: v1.27.00.10
OS: AKU2.3 (14955)
IPL/SPL: 1.00/1.07.0000
Language: ENG (UK), ENG (US), Finnish, Swedish, Norwegian, Danish, German, Italian, French, Spainish, Portuguese, Dutch, Greek.
Changes:
1 Phase in Streaming Player.
2 Phase in HSDPA icon.
3 Fix to ITS #1778 When enabling FDN, only 4 digits can be entered in the PIN2 box. PIN2 should allow up to 8 digits .
4 Fix to Voda sim voice mail missing notification issue. Double check solution is in codebase.
5 Set prefer data call to 3G
6 Fix Radio become "no signal" issue
7 Low volume of alert ting tone when breeze is waken up by an incomming call.
8 Fix Wmodem would be stoped with Win2K OS.
9 Fix cold boot lock up issue.
10 Fix "found display turn off in one minute while playing a WMV file."
11 Fix: Some the reset radio will fail while there is a command is waiting the response.
12 Fix: The RIL driver will read wrong EF between 2G and 3G SIM.
13 If ATA followed a "No carrier", fake a "OK" as a response and see the "No carrier" as a unsolicitd command.
14 Fix "in voice call, if there comes another incomming call, uplink will be mute."
15 Bluetooth HCI transport driver performance improvement.
16 Remove all customization setting.
17 Update Magneto O.S to AKU3.3 build 15671.
18 [AKU 3.3] Incorrect "E" icon on the top of screen is displayed under 3G service.
19 There is no error message when activating PDP with incorrect APN, and system will become strange after that.
RADIO NEWS:
1 PS data stopped after VT call.
2 Fine tune BT quality by changing audio parameter.
1. support [email protected]=0~3 for MFG
3
2. add Athena DPRAM gpio in [email protected] for MFG
4 Protect AMSS.
5 Call Forwarding setting does not work in FET due to redundant "time" included if not "NO REPLY".
6 Remove SMS reply procedure.
7 Don't handle the max length of phone number correctly.
8 CE sent twice +GTKE(menu selection) to radio will cause radio hang.
9 Phonebook will be locked once SIM is PIN1 blocked, and it will never come back until resetting.
10 Send "Done" when rec empty SS_Release_Complete msg .
11 Protocol stack still camps on network when PIN1 is blocked.
12 +CREG may be sent before IMSI attach procedure is completed.
The MO call CCBS no inband tone issue at Sweden 2g/3g network. By disabling the CMSP bit in Classmark 2 and
13
PCP bit in Setup.
14 Return OK and no unsolicited +CREG and +CGREG sent out when manual selection to a forbbiden PLMN.
15 Add debug output to ATDBG when Attach, LAU, and RAU rejected.
16 CHLD=2 has no response when collision with MT disconnection.
17 Add unsolicited +HTCerror to report EF extension full/over boundary condition.
18 There is Incorrect bearer service code of call forwarding, when issue SS string "**21*09011111111*20#".
Fix ORO SIM issue, when user make a MO call, ME perform IMSI detach and then call drop.
19
Unable to receive calls from PABX lines in Australia when calling party subaddress is included in MT setup. This is
20
due to incorrect CLIP format response sent to CE.
When PIN1 is disabled and user forces to issue changing PIN, some SIM card will return incorrect sw1/sw2 and
21
cause wrong UI display.
22 Implement +BANDSET functionality.
GMAC will stock (PS service not possible) when CS_PS registered then LUP failed twice with cause
23
PLMN_NOT_ALLOWED (for instance)
Add AT command [email protected] [email protected] [email protected] to manage the GPS data in EFS. Modify [email protected] let
24
device can do warm and cold start without resetting the device.
25 Implement the Test mode for GPS Cold and Warm start for n times.
If remote call disconnected before STOP DTMF Ack received and modem WON'T response +VTS and reset by
26
WINCE finally.
1. disable USB regulator at default
27
2. let radio USB go to suspend after @USBPOWER=0
28 Add statistcc report for Test mode.
1. Add logs for tracking RTC and Tun
29
2. Preload Almanac data of 20060904
It can't camp on to STARHUB 3G (always seaching signal) while manual sitch to STARHUB 3G band under
30
STARHUB 2G band.
31 When there is a active call, can't make a mo call.
32 Add new +TTYMODE AT command to enable/disable TTY support in radio stack.
33 During SIM Initialization, delay +COTA notification after phonebook cache finish.
When edit the SetNetwork (edit PPLMN), If the user entered PLMN is not in the defult list. It will show "000000" to
34
WINCE. It's saved in SIM correctly but show not correct to user.
35 USSD notification could not be sent to RIL and return USSD Busy to network.
Reset or call failed will happen if network config T314 =0 and T315 !=0 when PS RAB +CS RAB and then radio link
36
failure happened.
37 SMC procedure fails due to simultaneous SMC procedures triggered by Lucent UTRAN.
38 Unable to answer the 2nd incoming call if end the first active call and attempt to answer the 2nd incoming call.
39 It can transmit event for DIAG port to fix Embedded log stall issue.
40 Fix time error of QXDM log.
41 Showing EDGE indicator when Serving cell support EDGE (Enabled for CE after AKU3).
42 Add AT+OSVER for CE to tell radio its version.
43 Fix time error of QXDM log.
44 Drop VT data when PCD=9,0
Phonebook extension support: 1. EF files support (EF EMAILi, EF GRPi, EF GASi, EF IAPi) through AT+PHSM, 2.
45
Support over 1,000 phonebook entries.
Ok...
where ? where ? where ?
Etienne
6 Fix Radio become "no signal" issue
Click to expand...
Click to collapse
YES!
Maybe this will finally fix the disconnect issues I've been having.
Please, please, please upload it
Royan
I will upload it within 12 hours, will send link (45 MEGS)
Yes! Please do. Can't wait to test.
hmmm...
in Changes:
".. 17 Update Magneto O.S to AKU3.3 build 15671..."
in ROM info (?):
OS: AKU2.3 (14955)
Is that right?
Thaaaaanks
i'm installing it
3 % completed
Etienne
Where's the link?
Where is the link please? I went home early from work today hoping to test this new ROM.
OK, it's up at
/Smartphone/Breeze MTeoR/
enjoy!!!!
where ? where ?
Radio 1.29 (!!)
AKU3.3
meaning:
1. great battery life in 2G and improved in 3G.
2. better call stability and reception quality in 3G
3. improved BT stack
I was hoping to download the new ROM but the files are gone.
Any chance to upload them back?
Thank you
no, files are there, I just checked
Uploads folder,
/Smartphone/Breeze MTeoR
have fun!
Perché non metti il link completo?
Non riesco a trovarlo.
Grazie
damn guys!
here's a direct link, woeking, tested:
ftp://xda:[email protected]/RUU_BREE100_1.32.251.1_1.29.00.10_HTC.exe
Finalmente ci sono riuscito.
Grazie e scusami per il fastidio.
New ROM is working fine. Just loaded it this morning. Hopfully the battery will last a bit longer now. I still went ahead and tweaked the display timeout as I've done in the past. This seems to help. I notice that it displays "Test ROM" during boot. Not that it's a biggie but thought I mention it. The EDGE icon still doesn't display as "E". Bummer. I really had hoped this was fixed but sadly no. Overall the ROM seems stable. It did go through the Cold Boot twice. For some reason after it booted the first time it must have had a problem cause on the second boot it did it again. No problems since and all of my apps are running as they should.
Under which bootloader is it running and if I have still the 1.04, can I upgrade directly?
Newbee you know, sorry
Well, the ROM works fine, but it didn't solve my problem of disconnecting from the GSM network.
I still get the "No Service" and "Searching..." messages, and I am still occasionally being disconnected while in call.
Oh well... I guess I'll just have to start the repair cycle, as it has to be a hardware fault in the phone. I don't care that HTC customer support insists that it must be a corrupt ROM, it's the fourth ROM version dammit...
Can someone who has loaded the ROM post the bootloader version?
Friends,
I am facing a unique problem since last 4-5 days now on my 3 month old diamond. Every morning say at after 10:00 am my phone status either shows out of coverage area or switched off to anybody who tries calling me. I usually send sms to my Office team between 9 to 10 in the morning. Sms gets delivered to them too and i get sms back too but suddenly after 10 am or so phone doesn't receive any sms or calls. When i call to my number it says the caller is not reachable or switched off even when it shows full signal strength on the taskbar.
Then i have to go to communications (in touchflo 3d interface) turned the phone to Airplane mode and then back again to phone on mode, then suddenly i receive pending sms and even the calls.
This is started happening since last 4-5 days only. Ha vent installed any software neither ever tried to flash rom. I am using the default ROM only. Please suggest if somebody else is facing the same problem and whats the solution.
Regards,
Vishal
Upgrade of ROM
U will need to upgrade ROM to solve this problem!
Finderup said:
U will need to upgrade ROM to solve this problem!
Click to expand...
Click to collapse
Well i dont think its a ROM problem, coz i am using stock rom only and using it since last 4-5 months with no problem. This has started occuring since last 4 days only
bump.........................
I need help on my Android. I cant text nor call it is a problem for me. Since the backlight problem is fixed. I really wanna use it. I am on Maxis Malaysia please anyone kindly help me fix it? when I called using other numbers. It goes to voicemail, as for message I dont receive any.
I took this last version and no problem for me
http://forum.xda-developers.com/showthread.php?t=666735
hmm, you mean you can text and all. where do you came from?
i'm from belgium, europe, i can text and call and eveything, some times it's buggy but nothing very annoying..
I am from asia. But it doesnt work for me. for the nextwork. which is kinda bugs me a little. still i need thread from others so that they can help me please. TY
the link given by ilgreco112 works for txting and calling
can andriod connect to the network ?
Hmm, it is more to the network than calling and texting
yes it can if you has the network setting
you have to manually type the apn settings
I just can't text and call.
format your sd card or just delete the data.img
then download the may2 version from here http://www.xperia.0fees.net/index.php?p=1_2_Downloads
extract all the files to root of card
replace all
then hit the haret
it will surely work for you
I did it the same. but i wil try remove data.img for once more.
Hi waikeong...
I use the Android 2.0.1 Clean Version UPDATED may2...
o I CAN:
o send/recieve sms
o use 3g data
o use wifi
o recieve calls (with ringtone!)
I CAN'T:
o make calls (it just says, call ended)
o hear a sound when I recieve an SMS or mail...
Tried a reset of data.img, no good...
I manually entered APN settings...
I cant do any of it.
daweeb said:
I CAN'T:
o make calls (it just says, call ended)
o hear a sound when I recieve an SMS or mail...
Tried a reset of data.img, no good...
I manually entered APN settings...
Click to expand...
Click to collapse
waikeong said:
I cant do any of it.
Click to expand...
Click to collapse
I can do all that!
I need more help as possible. I did as sanjay said. but failed.
did you search for the network operators in linux?
if it doesnt txt then you must not be connected to any service operator,
cause usually when you start up it will connect to the operator and download its settings, if you use mms then you may need to add the number or address.
what about using 2g networks?, flight mode ?.
connecting to a service for txting and calling works under windows ?, what rom are you using ?
it should just work straight out of the box with a generic xperia.
i was fiddling with the operators under linux, it stalled wouldnt load again so i deleted the data.img and now back to normal, then i turned it off changed simcard to 2degres and both on the first boot
i dont know what else to tell you, you may need to ask the network provider i didnt find much information on Maxis Malaysia website.
Can you even see a signal strength in the notification bar at the top? or is it showing as disconnected?
Its not the APN settings, because they are only for data connections, and have nothing to do with calls & txt.
The problem may be that android cant read the network settings from the SIM you have? Maybe go to your carrier and ask for a new SIM? (one compatible with android)
Does your carrier sell any android phones?
The phone was working pretty fine 30 min ago when i flashed Darky's 8.0 ROM , when I took it out to make a phone call and it says just "Emergency call only" instead of showing my phone operator (BSNL 3G). I tried rebooting, no luck! Still the same. I replaced the sim with operator (TATA DOCOMO) i got same thing Emergency call only".
Now the Strange thing is that it has signal (full) but I can't make/receive calls . If I go under Settings -> Wifi -> Mobile networks settings and I look for operators it searches and I can see all of them (mine included) but I cannot select it!! Neither mine nor another one ...it just says "Unable to connect. Try later".
Weirdest thing of all is that I AM RECEIVING PUSH EMAILS from gmail!!!
I can browse internet and market. Twitter application is working.
Anyone has a clue about this??? Has it ever happened to anyone?
I have reflashed again with Darky's Rom 8.0 and the Stock ROM but still Emergency call only".
Hope I don't have to reflash some other ROM...
what is your modem? Darky's one?
Sounds like your phone is IMEI locked!? Did you buy a used one? May be stolen.
Sent from my GT-I9000 using Tapatalk
borelis said:
Sounds like your phone is IMEI locked!? Did you buy a used one? May be stolen.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I bought the new one. The problem started after installing voodoo lagfix my IMEI number was gone. I deleted some of the files in /efs folder , installed Darky's 8.0 ROM every thing worked for a while & again there was not data connection.
When i delete the files in /efs folder i can see the Operator Name for some time..
So you did messed up with your EFS? (Which is i think horrible thing to do when not have a backup of EFS)
try to install the modem file from your latest "official" rom (look into samsfirmware.com)
is your imei the same or changed
the only instances ive seen when you cant call or message but can get data is when the imei is blocked
regards
emergency call only
dalco said:
The phone was working pretty fine 30 min ago when i flashed Darky's 8.0 ROM , when I took it out to make a phone call and it says just "Emergency call only" instead of showing my phone operator (BSNL 3G). I tried rebooting, no luck! Still the same. I replaced the sim with operator (TATA DOCOMO) i got same thing Emergency call only".
Now the Strange thing is that it has signal (full) but I can't make/receive calls . If I go under Settings -> Wifi -> Mobile networks settings and I look for operators it searches and I can see all of them (mine included) but I cannot select it!! Neither mine nor another one ...it just says "Unable to connect. Try later".
Weirdest thing of all is that I AM RECEIVING PUSH EMAILS from gmail!!!
I can browse internet and market. Twitter application is working.
Anyone has a clue about this??? Has it ever happened to anyone?
I have reflashed again with Darky's Rom 8.0 and the Stock ROM but still Emergency call only".
Hope I don't have to reflash some other ROM...
Click to expand...
Click to collapse
same problem with me . my canvas 4 shows emegency call only .. its happened after restore of imei .
how to fix that problem
Hi it already does 3 days that my phone doesn't receive/send SMS , it say's the error message that my SMS couldn't be sent. I unlocked my phone, rooted it ,got gingerbread 2.3.6 then tried to go on Cyaogenmod, it bootlooped my phone. I finally fixed it and now I'm only with gingerbread 2.3.4,no root but.. I'm not receiving SMS or i can't send them still. When I'm opening my phone I can receive and send for the first minute after that it doesn't want to.. So please help me I'm a little frustrated.. 3 days........... -_-
New: Just activated the airplane ON and OFF , and when it was off I was able to receive SMS and now .. nothing.
CouilleBleu said:
Hi it already does 3 days that my phone doesn't receive/send SMS , it say's the error message that my SMS couldn't be sent. I unlocked my phone, rooted it ,got gingerbread 2.3.6 then tried to go on Cyaogenmod, it bootlooped my phone. I finally fixed it and now I'm only with gingerbread 2.3.4,no root but.. I'm not receiving SMS or i can't send them still. When I'm opening my phone I can receive and send for the first minute after that it doesn't want to.. So please help me I'm a little frustrated.. 3 days........... -_-
New: Just activated the airplane ON and OFF , and when it was off I was able to receive SMS and now .. nothing.
Click to expand...
Click to collapse
Ok i am a noob at this but i had a similar problem though it didnt even work for that 1 min.
my problem was the imei number got corrupted..when i checked the imei(using *#06#) it said "?"
so u may want to check ur imei number.
I took my phone to service centre as I had no choice -.-