Database Develop

HELP!!! VERY URGENT!!! MY SCREEN FREEZED ON BOOT COLOURS

Hi
I am really desperated
I have upgraded my PDA2K to wm5 and was working ok until today that freezed on the bootable colour screen.
What should I do? Please help me

NO WORRIES at xda-developers
All you need to do is go to the (Boot options) Just reset the device, as soon as it starts quickly press Record and Camera button together before the version appears at the bottom. Use the record button to scroll up and down and camera for switching it to YES or NO. Leave the top one (Enable KITL = No) and the rest of two i-e (Clean Registry Hive) and (Format Storage) change both to YES. Then press Mail button. You will see a white screen, wait for a while, you will see a start up screen for the fresh setup  If the problem still exist then put into Boot Loader (Record + Power and Reset) the device will show you Serial and USB when it is docked with the cradle. First install the W 5 again, hope this will work, if all this doesn’t works, Downgrade it to 2003 SE, Only by installing the correct ROM (available here at XDA-Developers that is without EXT ROM) cause other shipped ROMs won’t work that are provided by vendors. This will work for sure. Later you can upgrade it again with W5. And yes if you want to stick with 2003 se, just unhide the Ext Rom and simply update it with you shipped ROM provided by your device vendor. Good Luck

I'M STILL IN TROUBLE - PLEASE URGENT HELP
Thanks for your kwik reply.
I have tried all that you have porposed but still nothing.
I have tried "Just reset the device, as soon as it starts quickly press Record and Camera button together before the version appears at the bottom. Use the record button to scroll up and down and camera for switching it to YES or NO. Leave the top one (Enable KITL = No) and the rest of two i-e (Clean Registry Hive) and (Format Storage) change both to YES. Then press Mail button. You will see a white screen, wait for a while, you will see a start up screen for the fresh setup" but stucks on the white screen.
I have tried to downgrade following the intructions but when should recognise the ROM comes completely in blank.
Please help.

More info please
Finally I was able to downgrade it. Will leave it like it is. Thanks for your help.
But now I have another problem. is crashing all the time, what can i do?

Prefer (HTC_Blueangel_WM5_Wizard with 1.5 Radio)
:wink: no problem dear, just upgrade it again to W 5 Prefer (HTC_Blueangel_WM5_Wizard with 1.5 Radio) and this time make sure you stop all these services. rapimgr.exe, outlook.exe, winword.exe, wcescomm.exe, wcesmgr.exe.
(Right click on taskbar -> Task Manager. End the mentioned processes) Do Not Install Resco File Explorer cause it hangs!
Hope this time you will be more prepared to face these kind of problems.
And if you really want to stick with 2003 se, format your device with 60 kb and unhide the Ext Rom, when you see the extended Rom in (Settings -> system -> Memory -> Storage Card), then just reinstall your The Original Shipped Rom (2003 SE) that can be downloaded from the carrier.
ROM version: 5.03.02 WWE
ROM date: 03/02/05
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM: 1.1.9.106

Where can I download that from?
thanks for the reply
Where can i download the HTC_Blueangel_WM5_Wizard with 1.5 Radio from?

good decision
Use the current avaialbe Wizard ROM, later upgrade Radio available at http://buzzdev.net/component/option,com_remository/func,fileinfo/id,225/. Just run MaUpgradeUt_noID.exe in Bootloader mode.

good decision
Use the current avaialbe Wizard ROM, later upgrade Radio available at http://buzzdev.net/component/option,com_remository/func,fileinfo/id,225/. Just run MaUpgradeUt_noID.exe in Bootloader mode.

I am stuck in 4 colored screen or can't exit BootLoader (softreset didn't help)...

Hi folks,
i tried the upgrade like in "HTC_Blueangel_WM6_Wizzard" is discriped,
but after a hardreset i can't start my device or get in debugger screen!
I only see the boot screen with "R 1.10.00" displayed.
Any help would be welcome!
My device
Modell: PH20B1
CPU: Intel PXA263 400 MHz
RAM: 128 MB
Flash: 32 MB
ROM: 1.31.01 GER 12/13/04
Radio: 1.10.00
Protocoll: 133.7.391
ExtROM: 1.12.169 WWE
iso

i also experience this problem. can any one help us?

iso0815 said:
Hi folks,
i tried the upgrade like in "HTC_Blueangel_WM6_Wizzard" is discriped,
but after a hardreset i can't start my device or get in debugger screen!
I only see the boot screen with "R 1.10.00" displayed.
Any help would be welcome!
My device
Modell: PH20B1
CPU: Intel PXA263 400 MHz
RAM: 128 MB
Flash: 32 MB
ROM: 1.31.01 GER 12/13/04
Radio: 1.10.00
Protocoll: 133.7.391
ExtROM: 1.12.169 WWE
iso
Click to expand...
Click to collapse
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.]
I hope this will help to resolve the problem
Take Care
ENJOY

Old Bootloder?
Software Solutions said:
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
Click to expand...
Click to collapse
THX for your hint, but this is what doesn't would work!
When i press the two buttons, like you descriped and it is shown in wiki, no meue is shown?!
Maybe Bootloader of my BA is not the newest? = R 1.10.00
Could you tell me how i can update it?
iso

iso0815 said:
THX for your hint, but this is what doesn't would work!
When i press the two buttons, like you descriped and it is shown in wiki, no meue is shown?!
Maybe Bootloader of my BA is not the newest? = R 1.10.00
Could you tell me how i can update it?
iso
Click to expand...
Click to collapse
The bootloader is included in the ROM that you flash onto the device so that is not the issue. You must press the two buttons and hold them until the menu appears. It may take several attempts to succeed. The R that you are referring to represents Radio and has absolutely nothing to do with anything other than GSM operations.

Kasush said:
The bootloader is included in the ROM that you flash onto the device so that is not the issue. You must press the two buttons and hold them until the menu appears. It may take several attempts to succeed. The R that you are referring to represents Radio and has absolutely nothing to do with anything other than GSM operations.
Click to expand...
Click to collapse
okay... thanks for you info, but...
if R 1.10.00 is not the version of Bootloader i got no other on screen.
I pressed the record and media button while reset and after.
I pressed the buttons similar and step by step.
I pressed the buttons after battery reconneced.
I wait after reset without pressing buttons... nothing more happens then a screen with stipes an "R 1.10.00" is displayed in right bottom.
Buttons were working fine while i used WM2003 SE on the device, so i think bottons are not the problem... but where is the bug?
I am getting crazy... ???!
Maybe i should use a other rom?
Or try to use mtty? (see above)
iso
Added:
I used mtty like discriped in http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP but after Reset no difference... :-(

So, in the three stripes screen you only see R 1.01.00 and no G xxxx.xx nor D x.xx.xx.xxx ?
Maybe that means that you have no OS installed. Have you tried reflashing the ROM ?
Also, which ROM and program are you using to flash ?
JP

i dont know about R G and D terminologies...
but we think "R 1.10.00" stands for your RADIO Version... not the ROM.
and since you're not showing the "G xxx.xx" and "D x.xx.xx.xxx"...
i second JP... it's a bad ROM Flashing...
try to flash back the old rom and retry the upgrade.

Used tools..
THX for helping me...
I only used the tools of "HELMI_BA_WM6_R0_Public" archiv FLASH.
GetDeviceData.exe
MaUpgradeUt_noID.exe
RUU.conf
RUU.dll
EnterBL.exe
nk.nbf -> wm6-rom
and i have installed MS-Activesync 4.5.
I flashed the original o2-rom back and it works. WM2003 SE booting.
Than i flashed the HELMI_BA_WM6 and it was completed with 100%, no errors, but then after hardreset the same screen with stripes an R 1.10.00
Any more ideas?
iso

Same for me.
Any solutions?

Maybe this is helpful for you
bj_b4

Guys i think i have a similar problem.
I flashed my BA many times and it worked, back and forth WM5 to WM6 and so forth, until on Fri. I had accidentaly moved files and then deleted them from the windows dir. When I flashed the then WM6 to downgrade to WM5, it worked. When I used DOC resize tool to format my storage (didn't know about th mentined method) as usual (this worked many times before) & flashed to to WM6 then it got stuck at the 4 colors.
I tried what is wrote here and I am stuck at the white screen. nothing happening. It's been like that for an hour now. If i soft reset it, and try again it's the same nothing has changed.
any ideas?

[help] TyTN II always crased/hang

i bought my TyTN II yesterday, but it alwasy hang, i install nothing.. when hang at first time was after i used camera, then i remove the battery(i forgot that i can use soft reset) and then i try to personalize my device, then it hang again, so i soft reset, but after booting, it show notice that shell32.exe error, i try to hard reset but still hang sometimes, never go well, every times i'm using it, sometimes it stuck, i cant click it, so i have to soft reset it. i dont know what should i do... >_<
i bought it and already installed with
WM 6.1 pro
CE OS 5.2.19212 (build 19212.1.0.3)
ROM ver. : 3.29.707.0 WWE
ROM date : 05/07/08
Radio ver. : 1.65.16.25
Protocol ver : 25.83.40.02H
please help me, do i have to return the phone or i can repair itu by myself, but not void the warranty.. thanks..

Unable to Load Bootloader

I have tried hitting record + power + reset and still no dice.
I did this last Jan to my BA with few problems, put in the wm6.1
Wanting to install this one WM6.5
I also installed the Wizard Service Tool and it doesnt seem to work. It will give me info but the hard reset and other rom features don't want to work.
is there a workaround for gettin to the bootloader? Or should I take this all as a sign not to brik my phone? ;D
thanks,
chela

hi , i'm new on the forum...i think i've the same problem, on my PDA2K..
I try to install a new rom from wm2003se, using a file called "preparazione BA"( i think i've unlocked the extrom), then i normally setup with the MaUpgradeUt_noID.exe..But now, when the upgrading is completed to wm6, i'm not able to load the bootoption..i can see 4 colour bands (green blue red white) but no option to boot. The rec+photo+reset seem not to work.
Could anyone help me\us??
Regards at all
Davide

after 2 hours..here are some news: my pda2k display became with the 4 color but there was writen something about R none, G none and (version onf the rom i tryed to install) then pressing rec+cam i saw for little fraction of second the menu enable kitl ,clean registry, etc.. and then suddenly the wm6 starts. After installing the OS ask me to reset..Well, it return to the same 4 color, and the only word i see is R1.11.00
I'm getting crazy...
Please big chef tony help me!
i don't know what to do now...i'm little down
Davide

...lol maybe because I dont do this often enough, but this case was solved with a little bit of RTFM!
I didnt realize I was pressing the wrong fsking button! derr!
Here is Chef Tony's post...should carve it into my desk!
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners

Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08

i've solved my problem..reading on other forums, they suggest to install a rom WM5, where there was radio upgrade too..After i was able to install WM6.1 ! Now..i have to wait..and crossing my fingers!
Thank you all, if anybody has question ask me, i'll happy to help you
Bye
Davide

Davidenji said:
Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08
Click to expand...
Click to collapse
Nothing strange about what is in photo #2! That is the debugger screen.
Looks like you got it rolled back to the original ROM but if you decide to put the latest stable ROM 6.5 on there you're going to have to follow the Chef's directions in the above supplied link.
Good luck,
Chela

glad you found it out, you are right, there was something wrong with the radio, which is why in screenshot #1 there is only the radio listed and i think that's also why in #4 the comm icons are red, i've never seen that before, but could also be a custom skin in that rom.
brujeria is right, there is nothing wrong with the 2nd and 3rd screenshot, except for the 2nd one only showing the rom and no radio or protocol, meaning that the device was probably resetted by pulling out the battery and not pushing the reset pin with the stylus, unless that was also a radio issue.
unless you already started customizing your device you should probably think about hard resetting it once again and trying if that works, or even re-flash the rom, without flashing the radio, that way you'd know for sure, if from now on you'll always have to flash a "baked rom" (usually a term for a cooked rom, together with radio and extrom, a full flash, in this case i mean rom and radio rom, since the extrom is not really flashed anymore).
with best regards,
Chef_Tony

i've already customized...a little! Now, everytime i soft reset i read this: R 1.15.00 , G 1337.45 , D 1.21 michy.
I've no problem at moment..but i hope i won't never hard reset!
This Rom (WM6.1 included only Rom upgrade) it's nice, but i'm interested about WM6.5..anyway i think to keep this one untill a problem will come out
P.s. Like you say, now the antenna isn't red anymore..it's bright green
Thank you a lot for the support guys!

Did i destroy my phone?

Hello, i was tired of duttys rom so i decided to install the orginal 6.5 windows rom.
It got to 16% and then it got stuck, i tried again a couple of times but it stopped at 16% all the time.
Then i tried to hard reset it, nothing.
Now i tried to install the newest dutty rom.
Now i'm stuck at the "Touch diamond 2" loading screen.
How the hell do i fix it?
Also it loads the RGD thing, but then it just freezes

Please help :s

What does your SPL show?

My spl? Do you mean the RGD thing? if so:
R: 4.49.25.91
G: 61.44etc.25.35U
D 2.53.Dutty

No, put the topaz in bootloader and you can see your actual SPL

SPL-1.33.0linex (stupid 5 mins for edit..)

- Turn off your device using the power button
- When the device is turned off press simultaenously the volume down button + Power button
- Your device will startup in Bootloader mode with band tricolor

Thanks for the help. You sure saved my weekend.
(Got help over pm)

**Deleted**

Nuggi, would you be so kind and share the info with the rest of us, as I have exact same problem as you did in the first post.
Phone dropped to ground, screen got bit smashed so I thought to send it to repair. I put original SPL and 6.1 rom inside and boom, doesn't boot anymore.
EDIT: Found this post, checking now if it works. http://forum.xda-developers.com/showthread.php?p=7191733#post7191733
EDIT2: Success! The software started all fine.