Database Develop

How to clean WM5

after upgrading to WM5 ill try to install software.... when ill try to downgrading thats work perfect ..but when I try to upgrade again all the installed application before i downgrading is still there ....
how to clean ... the WM5 (hard reset) ....
thankyou ...

Look at the Wiki, the upgrade process. It says so there.

Mastiff said:
Look at the Wiki, the upgrade process. It says so there.
Click to expand...
Click to collapse
thx .. but I allready read WIKI... i still didn find itu how to install clean WM5...

Yes you did. But another thing is that you may not have understood that it was what you read. Look at this quote from the Wiki upgrade part, instruction number 11:
Hardreset based on Screen Information
When you are done, remove your device from the cradle.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse

help
thanks man ... really works....

No problem. I have been there myself (the "read the Wiki" - "I read the Wiki"-part). :roll:

Try this:
http://forum.xda-developers.com/viewtopic.php?t=27966

http://forum.xda-developers.com/viewtopic.php?t=27966
this tools does not work for me....
im using with 3 button ... its works... anyway thanks man....

I tried it, and it didn't work on my BA.

I have tried to upgrade WM2005 Blue Angle WWE PH20B2

I have tried to upgrade WM2005 Blue Angle WWE PH20B2 bt no it not working. Only I can enter the loadre mode by pressing pwer+recorder+reset buttons. Device is not working. Hw can I put the old version Windows 2003SE again?
Thanks in advance.

same problem
i've got the same problem, has anyone got the devicedata from an o2 xda3? or an image file? how coul i fix the bug with the buttons only the bootscreen appears and i have tried a lot of key combinations?
PLEASE HELP

managed flashing back to wwe
ok, well i managed to downgrade and flash to 2003SE again because i couldn't get wm5 to run.
my device is a PH20B1 - it is an xda 3 without camera, pressing windows media and record didn't work with this one :-(
could someone help? i tried nearly every file with everyconfiguration with editfix for wm5... but still the key-problem
greetings
chris

HELP!!! VERY URGENT!!! MY SCREEN FREEZED ON BOOT COLOURS

Hi
I am really desperated
I have upgraded my PDA2K to wm5 and was working ok until today that freezed on the bootable colour screen.
What should I do? Please help me

NO WORRIES at xda-developers
All you need to do is go to the (Boot options) Just reset the device, as soon as it starts quickly press Record and Camera button together before the version appears at the bottom. Use the record button to scroll up and down and camera for switching it to YES or NO. Leave the top one (Enable KITL = No) and the rest of two i-e (Clean Registry Hive) and (Format Storage) change both to YES. Then press Mail button. You will see a white screen, wait for a while, you will see a start up screen for the fresh setup  If the problem still exist then put into Boot Loader (Record + Power and Reset) the device will show you Serial and USB when it is docked with the cradle. First install the W 5 again, hope this will work, if all this doesn’t works, Downgrade it to 2003 SE, Only by installing the correct ROM (available here at XDA-Developers that is without EXT ROM) cause other shipped ROMs won’t work that are provided by vendors. This will work for sure. Later you can upgrade it again with W5. And yes if you want to stick with 2003 se, just unhide the Ext Rom and simply update it with you shipped ROM provided by your device vendor. Good Luck

I'M STILL IN TROUBLE - PLEASE URGENT HELP
Thanks for your kwik reply.
I have tried all that you have porposed but still nothing.
I have tried "Just reset the device, as soon as it starts quickly press Record and Camera button together before the version appears at the bottom. Use the record button to scroll up and down and camera for switching it to YES or NO. Leave the top one (Enable KITL = No) and the rest of two i-e (Clean Registry Hive) and (Format Storage) change both to YES. Then press Mail button. You will see a white screen, wait for a while, you will see a start up screen for the fresh setup" but stucks on the white screen.
I have tried to downgrade following the intructions but when should recognise the ROM comes completely in blank.
Please help.

More info please
Finally I was able to downgrade it. Will leave it like it is. Thanks for your help.
But now I have another problem. is crashing all the time, what can i do?

Prefer (HTC_Blueangel_WM5_Wizard with 1.5 Radio)
:wink: no problem dear, just upgrade it again to W 5 Prefer (HTC_Blueangel_WM5_Wizard with 1.5 Radio) and this time make sure you stop all these services. rapimgr.exe, outlook.exe, winword.exe, wcescomm.exe, wcesmgr.exe.
(Right click on taskbar -> Task Manager. End the mentioned processes) Do Not Install Resco File Explorer cause it hangs!
Hope this time you will be more prepared to face these kind of problems.
And if you really want to stick with 2003 se, format your device with 60 kb and unhide the Ext Rom, when you see the extended Rom in (Settings -> system -> Memory -> Storage Card), then just reinstall your The Original Shipped Rom (2003 SE) that can be downloaded from the carrier.
ROM version: 5.03.02 WWE
ROM date: 03/02/05
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM: 1.1.9.106

Where can I download that from?
thanks for the reply
Where can i download the HTC_Blueangel_WM5_Wizard with 1.5 Radio from?

good decision
Use the current avaialbe Wizard ROM, later upgrade Radio available at http://buzzdev.net/component/option,com_remository/func,fileinfo/id,225/. Just run MaUpgradeUt_noID.exe in Bootloader mode.

good decision
Use the current avaialbe Wizard ROM, later upgrade Radio available at http://buzzdev.net/component/option,com_remository/func,fileinfo/id,225/. Just run MaUpgradeUt_noID.exe in Bootloader mode.

Stuck in BA WM6 Upgrading

I'm Stuck in BA WM6 Upgrading.
I was at the HTC_Blueangel_WM6_Wizzard Upgrade 4
After execute the installer file I performed a Hard Reset
Colored stripes (the bootscreen) will appear on the screen but I can't ge no debugger screen at all: the BA remain in Bootscreen with R 1.11.0 at the right bottom of the screen.The battery was full. I've tried the mtty procedure as well...no way out. Any clue ????

Have you follow all this steps here?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1

Yes I did and now I'm Stuck at
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4

And what device do you have in fact? Qtek 9090? Other??
Mine is a Qtek 9090 and didn't have any trouble...

Same problem here, wm6 was already running; downgraded to 2003 SE to repartition the extrom, wanted to flash to wm6 again; now my xda3 is stucked after flashing, only r 1.10.0 is shown, no chance to carry on...???

I've got imate pda2k ct2cwj...and Heinzibua I'm stuck on R 1.11.00 do you have an Imate as well ??? cause I guess the official XDA procedure doesn't work for this kind of model (mine was an Italian W2003).
I'm very upset about this...

@ conosciani.m
wm6 worked well on my xda3 , problem was only after repartitioning the extrom.

I'm going to think I did somenthing wrong during the extrom steps..so i've returned back to wm2003 and I'm going to try the upgrade again

please tell me, if you find the solution...

running again
i repartitioned storage in 2003SE set to 20000 kb.
flashed to WM6, no problem now, storage is 41,25 MB, but running !!!

I did it too, I had to reinstalled w2003 and dit the Upgrading BA WM6 wizard again.....
after UNHIDE the rom, this time (and not in the previous upgrading), I did it the rom format using MTTY after that I ran the upgrade procedure and I got the WM6 running.
Happy for both of us to reach the goal......

do you have 60 MB storage now ?
can you give me more infos about MTTY ?
thx
tried to set storage to 60mb again, stuck again, also if i do just the same procedure as yesterday it is stuck; start to hate this device.
please tell me, what you did exactly to make it run. tried mtty also, but don´t know, what to do...

try this...
1. downgrade to 2003
2. copy the utils to the phone(extrom utils and repart_doc.exe)
3. install extrom utils...
---a. tap unhide... ok.
---b. tap unlock... ok. may throw an error but still ok...
---c. reset...
4. run Repart_DOC
---a. Set it to 128 byte
---b. Go/Start/Format (it should succeed)
5. reset to bootloader
---(press and hold record + power button then stick reset)
6. flash WM6 ROM
7. cold boot (press and hold power button then stick reset)
8. (optional) if stuck in the "tri-color"(white isnt a color ) screen...
---Hard Reset. Using No/Yes/Yes option.
reading further about the Repart_Doc topics...
128byte is the smallest you can format/resize the extrom
to maximize the storage in WM6.

Thx, that´s exactly what i did many times without success...
but now it works, after upgrading radio rom there also was no problem with upgrading to WM6; 60 MB rom; i only want to upgrade to radio rom 1.15, then i´m happy.
thx everybody for your help

Unable to Load Bootloader

I have tried hitting record + power + reset and still no dice.
I did this last Jan to my BA with few problems, put in the wm6.1
Wanting to install this one WM6.5
I also installed the Wizard Service Tool and it doesnt seem to work. It will give me info but the hard reset and other rom features don't want to work.
is there a workaround for gettin to the bootloader? Or should I take this all as a sign not to brik my phone? ;D
thanks,
chela

hi , i'm new on the forum...i think i've the same problem, on my PDA2K..
I try to install a new rom from wm2003se, using a file called "preparazione BA"( i think i've unlocked the extrom), then i normally setup with the MaUpgradeUt_noID.exe..But now, when the upgrading is completed to wm6, i'm not able to load the bootoption..i can see 4 colour bands (green blue red white) but no option to boot. The rec+photo+reset seem not to work.
Could anyone help me\us??
Regards at all
Davide

after 2 hours..here are some news: my pda2k display became with the 4 color but there was writen something about R none, G none and (version onf the rom i tryed to install) then pressing rec+cam i saw for little fraction of second the menu enable kitl ,clean registry, etc.. and then suddenly the wm6 starts. After installing the OS ask me to reset..Well, it return to the same 4 color, and the only word i see is R1.11.00
I'm getting crazy...
Please big chef tony help me!
i don't know what to do now...i'm little down
Davide

...lol maybe because I dont do this often enough, but this case was solved with a little bit of RTFM!
I didnt realize I was pressing the wrong fsking button! derr!
Here is Chef Tony's post...should carve it into my desk!
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners

Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08

i've solved my problem..reading on other forums, they suggest to install a rom WM5, where there was radio upgrade too..After i was able to install WM6.1 ! Now..i have to wait..and crossing my fingers!
Thank you all, if anybody has question ask me, i'll happy to help you
Bye
Davide

Davidenji said:
Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08
Click to expand...
Click to collapse
Nothing strange about what is in photo #2! That is the debugger screen.
Looks like you got it rolled back to the original ROM but if you decide to put the latest stable ROM 6.5 on there you're going to have to follow the Chef's directions in the above supplied link.
Good luck,
Chela

glad you found it out, you are right, there was something wrong with the radio, which is why in screenshot #1 there is only the radio listed and i think that's also why in #4 the comm icons are red, i've never seen that before, but could also be a custom skin in that rom.
brujeria is right, there is nothing wrong with the 2nd and 3rd screenshot, except for the 2nd one only showing the rom and no radio or protocol, meaning that the device was probably resetted by pulling out the battery and not pushing the reset pin with the stylus, unless that was also a radio issue.
unless you already started customizing your device you should probably think about hard resetting it once again and trying if that works, or even re-flash the rom, without flashing the radio, that way you'd know for sure, if from now on you'll always have to flash a "baked rom" (usually a term for a cooked rom, together with radio and extrom, a full flash, in this case i mean rom and radio rom, since the extrom is not really flashed anymore).
with best regards,
Chef_Tony

i've already customized...a little! Now, everytime i soft reset i read this: R 1.15.00 , G 1337.45 , D 1.21 michy.
I've no problem at moment..but i hope i won't never hard reset!
This Rom (WM6.1 included only Rom upgrade) it's nice, but i'm interested about WM6.5..anyway i think to keep this one untill a problem will come out
P.s. Like you say, now the antenna isn't red anymore..it's bright green
Thank you a lot for the support guys!