my device is pda2k or BA
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.12.00
Protocol version 1337.42
ExtROM version: 1.40.169 WWE
all of a sudden the bluetooth on my device did not send or receive
i tried several times the blue light flashes always but my device cannot be seen by other devices and cannot send or receive
is there any thing to install to solve the problem ????
is there any thing to do to know whether its a software or heard ware issue?????
pleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeease help
use a registry editor go to "HKLM\Software\Microsoft\obex\" here change the value of Dword "IsEnabled" from 0 to 1. and also turn on beam while transfering.
it works for me.
thank you
thank you
but where can i get the registry editor for my pda2k
please tell me
from here
http://www.phm.lu/products/PocketPC/RegEdit/
dear krishan2207
i did it just like you said but it didnot work
please please please
any helppppppppppppppppppppppp
please help
my problem didnot resolved
u should try a hard reset or rom change.
dear krishan2207
i did the hard reset several times and
i did re install the WM2003SE after the hard reset but it didn't work
coz i find the same
today paper after re installation of the WM2003SE rom ?????????
is there any way to delete or formating the old rom ( completely ) before the installation rather than the hard reset
please help
many thanx 4 your follow up
y u r not giving a chance to wm6 or 5.
dear krishan2207
i am not afraid of upgrading
i am afraid of downgrading back to wm2003
i want to know if the extended rom return to its original setting
i think u r very new to all this.dont worry man u can return it back.
dear krishan2207
i ve changed my rom to wm6 & back to wm3 several times
but blue tooth still not working
i think it is a problem in BT driver
any help with that please
another Q ?
how can i remove my old rom completely ie not up grade or replace i want to delete my rom completely before i install the new rom
thanx 4 help
DrAsd
hv u done a hard reset after upgrade if no, chk the wike and u can not empty(completely remove) your rom. when u upgrade or downgrade ur rom all files get changed but U HV TO DO A HARD RESET. MUSTTTTTT.
i did the hard reset before & after up grading & downgrading
and the same result was found
any help with the blue tooth driver ??
Same here, tried everything
I bought a T-Mobile branded Blue Angel used at an electronic swapmeet last month. I thought the unit was in good working order as I tested the voice GSM calling ok. Now I found that the Bluetooth does not work at all. I tried upgrading to WM6 and downgrading back to 2003SE and did many hard reset all along. It'll not find any BT devices, not can be found by others. It shows up as if it is working, in the BT stack, as well as the LED, but no communication at all. I think the chip is dead.
I wonder how I can get this repaired, and how much it would cost me. It's a bummer, otherwise it's working fine.
Hi all, I 've just update my Tilt to the WWE WM6.1 ROM, but after that, when I connect the Tilt with my computer & soft reset the tilt, it will hangs at startup screen, if I disconnect it & soft reset, it becomes normal, anyone has this problem too?
here is the information of my tilt:
ROM ver: 3.28.405.0 CHT <----I sure I load the WWE 6.1 ROM to it?
ROM date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
this is just the tip of the iceberg. wait until you notice other issues, especially if you were using lots of 3rd party software. core media player and skype are two very commonly used pieces of software that dont work as well. i have spent the whole of sunday torturing myself with this update.
i tried to be careful and waited until the official rom update appeared. i was patient and i thought i was wise, but it didnt help. i might have to revert back to 6.0 after a few days of testing
This should have been posted in the ROM section but anyways you need to check out this to see how pissed people are about it so dont think its just yourself
http://forum.xda-developers.com/showthread.php?p=2233188#post2233188
i need help with my phone, ive tried almost all, just udpated my cingular sx66 from wm2003 to wm6 through wiki, almost nothing is working perfectly, my wifi has to click many times in order to turn on, bluetooth paired with my jabra, awful, intermitent sound, can't watch youtube, and many times the phone icon turns off and when i turn it on, it says no service, ive tried with many sims but i have to soft reset almost always in order to read the sim, i already unlock it with the unlocker provided here, ive tried searching for the latest radio rom but i have no idea how to update, tried to install extended rom, no idea, did all the instructions in the sx66 standardization project, it is just a folder with a lot of cabs but not even the auto install runs or do anything, please i need help, i cant use the phone, ive searched and couldn't find anything
thanks for the help
mine working fine... try to hard reset again. btw ur flasing who's ROM?
ok the first thing is that whenever u take the battery out from BA u must soft reset it by the stylus.
and radio link is
http://rapidshare.com/files/131754772/BA_RRPT_Radio_11500.rar.html
upgrade procedure is same as u did before.
i just upgraded using the wm6 Ba wiki, no issue with that, i used the same radio rom you posted 10 times but it never updates, it stays, in "updating device, don't disconnect" for more than 8 mins, so I suppose is not working
rom version: 5.60.00
rom date: 03/02/05
Radio version: 1.02.10
protocol version 1337.35
extrom version: 1.40.125
i think that the extrom installed,
this is something wrong with ur device radio cause i hv sucessfully updated my radio using that files. and also given it to other xda-developers.com members for update and they did it sucessfully.
Too Bad, Ive Tried Everything, The Worse Things Is That I Have Three Exact Phones
please visit :
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
for make sure your upgrade is valid.
and i suggest this rom :
http://forum.xda-developers.com/showthread.php?t=406372
thanks, this new rom worked perfect, the only thing is that i don't see the htc home as I used to see it with the hour, weather, i just see on the bottom, the ultimate launche but is different, i installed all cabs,e xt roms and extra cabs, im i missing something, thanks
Hi Guys,
thanks for the good job you'all are doing. Will appreciate whatever help i can get to resolve this issue with my phone. I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. Since then i have noticed that sometimes it seems my phone is dialing itself or a call is coming in. The funny part is though every other function is working i wont be able to answer this phone. It will seem to hang. Then after a while i will get the cprog.exe error. To be able to make phone calls i have to soft reset the phone. i have had to hard reset my phone twice already with no solution. Also googling has not been able to provide any answer too. I just sent an email to HTC Technical support now but with experience i doubt if i will get any useful response. So this is my last resort.
It is also pertinent to note here too that intermittently i do get the tmail.exe errors.
Hi,
I am having the same problem after the upgrade..frequently its becoming stoned! requiring restart many time during the day...which was not the case before...anybody has got any solution???
I love my TyTn II but not the 6.1 ..its not stable!
azuka said:
Hi Guys,
I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. ........ errors.
Click to expand...
Click to collapse
Azuka, who so ever upgraded to 6.1 from HTC experienced the same problem even i myself suffered the same. So your only solution is to downgrade to 6 but before doing that you must HardSPL your phone ...
Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.
NotATreoFan said:
Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.
Click to expand...
Click to collapse
Thanks for your reply. Your two words "Bad Flash" got me thinking. How could that be. I thought so too and had to re-download the file from htc website and re-installed.
About HardSPL'd your phone, from reading the wiki i now know what it is. But there is no instruction out there to HardSPL'd. Do i need to get the file and copy unto my phone or what?
thanks.
Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.
NotATreoFan said:
Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.
Click to expand...
Click to collapse
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.
azuka said:
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.
Click to expand...
Click to collapse
I have the freezing issues too. Two things has helped me reduce the frequency (and improve general responsiveness of the device):
1. I've disabled the HTC task manager application - that helps a lot on responsiveness
2. Each time I soft reset the phone, I manually kill the mstli.exe process - that helps a lot on the freezing issues.
regards,
Spip
Just to share some experiences
So I have the TyTN II and I recently upgraded to the official HTC WM6.1.
I have none of these problems of screen freezing, unstable rom, etc etc etc...
However, I do suffer from occasional program error message and asks me quite a few times to send the report to microsoft.
But this only happens when I load certain third party softwares and then close them down.
I attribute this to compatibility issues with WM6.1...maybe I'm wrong. But that's what I think anyway.
azuka said:
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Click to expand...
Click to collapse
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.
I had this issue and it was just down to previous HardSPL being left at an early version (I think around 1.02) on the device and if you apply this latest HTC stock ROM update you get a bad flash and freezing especially in the threaded SMS app.
Install any HardSPL later than 3.00 then redo the ROM update and it should cure it.
Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.
NotATreoFan said:
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.
Click to expand...
Click to collapse
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution
if u need upgrade or downgrade then u r speaking about a need for hardspl
dkiersz said:
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution
Click to expand...
Click to collapse
Just a quick update. After HardSPL-ing my phone it worked well for sometime then the tmail.exe error surfaced. I have only had the cprog.exe error - where a call comes in and i can not answer neither can i make another call until i soft reboot - has only happened once or twice. Apart from these the phone has been working well.
Anyway i just got a reply from my earlier mail to HTC and thought i should post if here for people's information. Apparently they are aware of these issues and working on them. Read for yourselves:
New Response From [ Maha Mamer (Qatar Support (Tech)) ]
Thank you for contacting HTC Corporation Middle East Support Dear Mr. Felix First of all we are very sorry for our late reply Please, if your problem still exist with this error message, you can try one of two options. 1- go to Start> Settings> System(tab)> error reporting> and disable the error reporting option. 2- If this did not solve your problem, then you might need to get back to WM6.0 until we finish our update for the new release of WM6.1 with the new modification for our web site. Please do not hesitate to contact us back for any inquires. Please note that you could also contact us by phone on our hot lines. http://www.htc.com/mea-en/CA_Hotline.aspx?region=MEA Sincerely, thank you for choosing HTC Corporation HTC Corporation Middle East Support Team http://www.htc.com/mea-en/default.aspx
Just an observation here:
After reading somewhere on these pages that the erratic behavior of TYTN II could be due to bluetooth adapter i decided to go some days without my Motorola S9 bluetooth ear piece i am yet to experience any of the issues i had before. Could the bluetooth software for WM 6.1 be the issue?
Momentary Freezing - Resolved?
azuka said:
Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.
Click to expand...
Click to collapse
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
wa4cbg said:
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Click to expand...
Click to collapse
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.
How to Stop Momemtary Freezing
azuka said:
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.
Click to expand...
Click to collapse
I am looking for a solution. Not using Blue tooth to use a device that costs over 600.00 just doesn't make sense to me.
Is there a ROM hardSPL combination that will give me freeze-free performance or is this an HTC problem that is not solvable. I just can't believe that every Kaiser user that has upgraded to wm 6.1 has the same issue that I have with momentary freezes that last up to 5 seconds.
Is the solution another ROM, another Hspl, another phone? Who can help me resolve this issue? Is there a better place to post this?
Thank you
Freezes and locks.
Prior to my upgrading my AT&T Tilt to WM6.1 which I did today. I was experiancing LONG freezes, listening to music or just waiting for menus. I could not determine any specific software that was the cause. I tend to install a lot. Did a hard reset, didn't install the AT&T bloat, reinstalled my primary apps MS Voice Command 1.6 (a Must). Still same issues... Occationally could NOT answer calls. Hit the green button, or the answer option on screen. the onscreen 'answer' would flash, but I could not use the phone until a soft reset. LONG process when you are waiting for a call back.
AT&T sent me a new phone which I got and installed the NEW wm 6.1 before anything. Worked pretty well, but I had not made any calls or recieved any all day. I did listen to several hours of music on my Motorola S9 headset and made sure Audible Player would work. Two apps I use daily.
All seems well, except NOW I get the cprog.exe error. I decided to test my phone with a simple incoming call. Before I ended it, it went dead. Not sure what the HardSPL is yet. Will look into that. Just thought I'd let others know that the lag, AT&T seemed to think was a hardware issue so they replaced my Tilt.
Software installed; MS Voice Command 1.6, Live Search, Audible Player, TCPMP, FlashBundle, GPSToday. Pretty much it besides the AT&T bloat that came with the ROM. Good luck
My tytn ii device information details:
ROM Version : 3.34.721.2 WWE
ROM DATE : 09/30/08
Radio Version : 1.71.09.01
Protocol Version : 25.75.40.02.eMo
The problem happened this morning, while the unit was booting up, on the PASSWORD, the unit will automatically soft reset, so I press the soft reset again, still the problem persists, at the end , I then removed the battery and the unit performed normally.
What's causing for concern is what could be the problem? Why is the unit automatically performing a soft reset?? What could be wrong?