Download problem - MDA III, XDA III, PDA2k, 9090 Software Upgrading

hi,
i have a download problem about the wm5 upgrade files. (ftp://xda:***@ftp.xda-developers.com/BlueAngel/BA_WM5/Shipped_Extracted_Updates/WM5_pack_V3.rar).
address is dosn't work.
is there another way to download wm5 files and patches?
please help me! [/quote]

Related

QTek 9090 Rom Update Dead

Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny
i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]
Danido said:
Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny
Click to expand...
Click to collapse
Danny, check my reply at http://www.pocketpc-club.nl/forum/showthread.php?t=45319&page=3
Grtz,
DUTCH
Serial 2.06
dear Danido,
i got the same issue and i got over it.
u need to go to search and find this file:
PDA2k_CDLWWE_11222_169_10200_SHIP
then do the installation while your ppc is in the cordl with power supply.
good luck
helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
You cant post personal info...
muppet said:
i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]
Click to expand...
Click to collapse
[email protected]
helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Reply With Quote
Click to expand...
Click to collapse
Erase your email if you want to share your mail to anybody pm them please. maybe you can find out the answer but if you post here please ask by this way i know is slow... but many people can check the answer if you all post all the process.
[email protected] said:
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Click to expand...
Click to collapse
since you already have a problem, please use windows xp for now.
i would try to actually downgrade to stock ROM first (please refer to wiki to get the correct stock from your device)
secondly, i would try
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP

Help ,, can not receving any files from BA to PC !!!

hi
my BA is connected Ok with ActivSync 4.1 (4841)
I cant receving any files from my BA
But I can send files
any one can help me plz :roll:
thanx
I am using WM5
( Ivan v4 R3)
my Device Qtek9090
i cant recieve files from my ba either....
neither can i. haven't tried to search for it yet.
The first thing i can think of is some plugin logout had in his rom to use the ba as a sd card reader.
that was the WM5 Mass storage app... it's on the FTP as a cab I believe
EDIT: Think this is it... WM5 Storage
thats the oem package for the aku 2.3 dev packages, not a cab people can use
Iam still can not recive any files from my BA ,
please help
I am using this room for now :
Helmi AKU3.0 1.2b
WM5
but I am still have the same proplem please help
Abdullah85 said:
Iam still can not recive any files from my BA ,
please help
I am using this room for now :
Helmi AKU3.0 1.2b
WM5
but I am still have the same proplem please help
Click to expand...
Click to collapse
thats strange, U hv the problem on the both roms? what connection u use? is there any firewall? cos I never had this issues on any off my rom.
hi
I thinking it from my PC , cuse I sync with another pc then its work 100%
but I dont hav any firewall in my PC !!
my connection I use : USB cardle
how can I get off that proplem ??
thanks ya Helmi
To generaqlize, you may sync and transfer files on another pc but you can not do it on yours, right ?
If this is the case, so the problem is not in your Blueangel, it is in your PC.
There are few things that you may do:
1. Reinstall Activesync (or install version 4.2)
2. Check your Firewall, Antivirus, and network settings.
3. Reinstall Windows and all should work
xplode
xplode said:
3. Reinstall Windows and all should work
xplode
Click to expand...
Click to collapse
good one
but it should be used as a very last resort.
Yeah, thats why I wrote it as option 3

After upgrade contacts not working

Hi i have a problem with the contacts button. When a want run contact list its blink only and close. Please help me solved my problem i am beginner. Thanx
If you provide more information maybe someone will help you
Which rom do you use ?
I have helmi aku 3.5 v 1.4 but i tried xplode aku 3.5 too and i had the same problem. Before i had a BA 5.1.1700 build 14343 version and my device is qtek 9090.
i think that this is hardware problem, you must contact any near service for repairs
But when i upgrade my device to previous windows (5.1.1700) contacts works correctly.
Do you have any additional software installed? Make sure you've follow the installation in wiki and do not install any 3rd party software.
i ve installed only Rom, radio and extrom, nohing else and it doesnt work. When i install sim manager i dont copy sim contacts to contacts list cause it freezes.
which extrom you install ?
if it is by some operator as ms_.nbf this is the problem
Look when i install only ROM without extrom i have this problemm too so i think that the extrom isnt problem.
Problem Solved
Will you share with us what causes the problem, for future reference
1.Rename file pim.vol to e.g. pi.vol
2.Soft reset
3.Delte pi.vol
4.Backup contacts with PPCBckpContacts
i just got the same problm today. where do i get the pim.vol file?
What's the resolution? just curious.
ljex said:
Problem Solved
Click to expand...
Click to collapse
ok nvmnd. founf pim.vol and renamed.softreset and now i have Contacts.
thx for the solution

Crash when upgrading my trinity

Hi everybody,
I have a problem with my pocketpc.
I have flashed my trinity with the radio version 1.41.00.11 and the ROM WM6 2.2.
At this step, all is OK but when my pocketpc restart, I have the HTC screen and next the pocketpc is blocked with a write screen.
I have done a hard reset, and the result is the same.
Can you help me, please ?
Thanks a lot.
Flash again the rom
thanks for your response
I can't flash again because the pocketpc is unavailable
I can't access to the phone explorer via windows
Do you know by which way I can flash ?
Thanks
you might find the answer here http://trinityguides.info

Lastest Radio cannot be found

Hi all,
Looked in the wiki for ages and cant find the lastest radio's for the blue angel.
Could someone please direct me to the right place to find them and kindly tell me the best radio to flash as well.
Kind regards,
Jason
well read here
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
xplode said:
well read here
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
Click to expand...
Click to collapse
sorry about that, i thought it wasnt since the FTP links didnt work on my computer at home but did at work.
by any chance do you know how why i cant download these at home? i've downloaded them but cant send them via gmail as they dont allow it and i dont have a medium to save it on, doh!
thanks for your help again
When i try to upgrade either in bootloader or connection in activesync, i get error 120 country error.
can anyone tell me how to get round this please
hi all, i was able to upgrade my radio with WM6 downloading it from te wiki further down the page under
1.15.00 Radio Type I
ftp://xda:[email protected]_I/radio_.nbf

Categories

Resources