Hi,
I got a K-JAM and I need to use it inside my Intranet.
When I tried to insert a DNS address and a WINS address when configuring a GPRS connection I have found that I cannot insert three-digit octets but only two-digit octets.
e.g. I cannot insert an address like 192.168.0.5 but only 19.16.0.5 since I cannot insert the '2' digit of '192'
Does someone had the same problem?
I have the last Italian build
Rom version: 1.3.9.2
Radio version: 01.04.10
ExtROM version: 1.3.9.102
Related
After upgrading an i-Mate PDA2K (PH20B 0 B WWE E CDL__001 1.40.00 0 0 1.12.00 12.00) to WM5 BA TuMa v1.3 Release, ActiveSync via USB does not connect successfully.
Have tried all of the following without success:
- hard reset PDA;
- re-flash PDA, tried over 8 different WM5 ROM (including Logout, ArtZ, Ivan) all with the same problem;
- deleted all previous partnerships;
- Windows SP2 firewall disabled;
- set remote-NDIS host to use server-assigned IP address;
- reset IP on host computer (i.e. netsh int ip reset c:\resetlog.txt);
- uninstall/reinstallation of ActiveSync 4.1;
- uninstall/reinstallation of ActiveSync 4.2 beta;
- uninstall/reinstalled USB controller drivers;
This problem was experienced on two separate computers, none of which are running any software that modify the standard windows networking software.
When placed in cradle, ActiveSync on device reports that device is connecting, but, eventually fails with support code: 0x85020010.
Interestingly, when device is restored back to original shipped WM2K3SE ROM (PDA2k_WWE_14000_176_11200.exe), ActiveSync can connect successfully again via USB.
Any other suggestions to get ActiveSync via USB working under WM5?
Also, is it normal that once a BA has been upgraded to WM5, that you can no longer use BaUpgradeUt.exe and must always use MaUpgradeUt_noID.exe for future flashing? I lost the ability to use BaUpgradeUt.exe after the first upgrade.
Solution Found
Oops!
I forgot about the Firewall Client of Microsoft ISA Server 2004! Although it was disabled, it still must have been interfering with ActiveSync.
Uninstalling this ISA Firewall client software and restarting ActiveSync solved the problem.
Operator version : AKU3.2
Rom V 5.04.06 WWE
Rom date 03/02/05
Radio v 1.12.00
Protacol v 1337.42
Ram size 96mb
Flash size 32mb
Storage size 43.26nb
Model PH20B
Pocket PC
IMEI 3530300008641
GetData: PH20B AT%CID?
5 . 0 4 . 0 6 . 1.3 1.12.00 % 4
1st problem: Downloaded the Radio 1.15
and unrared it, fixed country code. (That was the error when tried to run it)
The download (Radio 1.15)does not show the ms_.nbf or the nk.nbf
Shows: Getdevice, Enter BL, BAupgradeut, HTCRUU.dll, HTCRUU and the radio_ (just like that, no ext.)
downloaded MaUpgrade_noid.exe. when I ran this gave me: Unable to locate Component. (this application failed to start because RUU.dll was not found. Re-installing the application may fix this problem
Please help
primbcadman said:
Operator version : AKU3.2
Rom V 5.04.06 WWE
Rom date 03/02/05
Radio v 1.12.00
Protacol v 1337.42
Ram size 96mb
Flash size 32mb
Storage size 43.26nb
Model PH20B
Pocket PC
IMEI 3530300008641
GetData: PH20B AT%CID?
5 . 0 4 . 0 6 . 1.3 1.12.00 % 4
1st problem: Downloaded the Radio 1.15
and unrared it, fixed country code. (That was the error when tried to run it)
The download (Radio 1.15)does not show the ms_.nbf or the nk.nbf
Shows: Getdevice, Enter BL, BAupgradeut, HTCRUU.dll, HTCRUU and the radio_ (just like that, no ext.)
downloaded MaUpgrade_noid.exe. when I ran this gave me: Unable to locate Component. (this application failed to start because RUU.dll was not found. Re-installing the application may fix this problem
Please help
Click to expand...
Click to collapse
Just rename the HTCRUU.dll to RUU.dll and you're good to go
thanks for help now new problem
new when I try to download get error:101 connection error
and ends my connection to active sync
By the way this is a fantastic place great people here
why is contacts so limited on the ba w5.o?
it doesnt exactly show the contacts in thesim and you cant send contacts to the sim! or is that just me ?
I have this problem too on my pda2k
My Device Info ;
Operator Ver ; AKU3.2
Rom Ver ; 5.04.06 WWE
Rom Date ; 03/02/05
Radio Ver ; 1.12.00
Protocol Ver ; 1337.42
ExtRom Ver ; Helmi V1.1
My Problem is ;
When I try to make a call after 5 seconds it is kicking me out from phone keypad section to Today Screen.
Also my contats menu not opening.
When I click contacts on Phone menu it's never opening.
Hi,
I'm trying to enable my BA (Helmi/Baniaczek R2) to use WPA encryption with my Netgear router.
Can this be curently enabled? If not, is there someone (Baniaczek?) who could add suppot for WPA (and replace WEP) in this ROM?
Thanks
DEVICE: BA (Orange SPV M2000)
ROM: Helmi_BA_WM2k5_AKU3[1].5_v1.4.CF2.R2
RADIO: 1.15.00
With my router, Netgear DG834GT, BA works well with WPA protection enabled.
Great. Thanks. I set it up and all works perfectly.
I get the same problem i cant connect with any security on
isnt there any other software to conntect rather can using the windows software
Did you check that the shared key is exactly the same? Some apps need the hex version of the key, so try that.
If you do not connect all then this could be an access list problem (based on the MAC address of your PDA). Check this.
If yu provide more info about the problem it will help...
HTH
Link: "http://bit.ly/sgA8o1" (copy paste this in your browser as i apparently can not post links, sorry!)
Folow the guide on that page or:
Code:
Want that fancy WiFi Hotspot internet sharing Tethering feature on you Windows Phone 7 device? If you are a Samsung Omnia 7 owner today is your lucky day. T-Mobile Germany pushed out a new firmware last night version I8700XXKI4 with the tethering / Internet Sharing feature enabled (thanks for the tip guys!). I’m a nice guy so I grabbed the firmware file and uploaded it so you can manually install it on your handset. Follow the instructions below (same a before and I’m not responsible if it doesn’t work for you):
- Download the firmware here (remember that’s not the OS but only the firmware bits) then download the WPupdate tools from here.
- Unzip the Tools in a folder then unzip the firmware in the same folder as the tools.
- Plug in your device, wait until the Zune client starts and then close it.
- Run the the Updater and press S or B (depending on the size of your balls..)
- your phone will then reboot in download mode and update (don’t unplug it or do stupid things with your PC during the whole process..)
Please note that this won’t work if you are running the latest I8700XXKI3 firmware from SFR (there’s a conflict with the 5.9.1.4 bootloader and maybe others too) so you will have to painfully revert back to an older firmware like the T-Mobile RC1 here (I8700XXKH2).
You should then have the following:
OS Version: 7.10.7720.68
Firmware revision number: 2424.11.9.4
Hardware revision number: 3.15.0.4
Radio software version: 2424.11.9.1
Radio hardware version: 0.0.0.800
Bootloader version: 5.9.3.0
Chip SOC version: 0.36.2.0
Enjoy tethering your handset!
Direct Rom download link: http://bit.ly/rOyGCG
Direct Tools download link: http://bit.ly/sOTNzl
P.s: That is not my guide! I had the French SFR bootloader problem, i reverted as he said and it worked seamlesly. You loose all data though!
didn't work for me, unbranded omnia7
here's error from logs dir "UpdateErrors"
ERROR: E_GENERAL_FILE_COLLISION : File Name: CSC_Config.xml :
Following Package on the Device already contains this file:
Package: CSCPackage FROM Version: 0.0.0.0 TO Version: 2250.19.7389.4880 GUID = {C3AD84D2-E6AB-4FEF-9DC8-C76A9A864731}
But following Update Package is causing a File Collision because it also contains this file and it is trying to add it to the Device :
Package: \OSRoot\Application Data\Microsoft\DeviceUpdate\Packages\5FF6E1CF-87C8-4B68-A2B6-B7912F7292AE.1.pks\I8700DTMKI4.cab.pkg FROM Version: 0.0.0.0 TO Version: 2250.19.7720.6464 GUID = {39813B40-A115-11DF-981C-0800200C9A66}
ProcessGraphs :CheckFileOwnsership returned E_GENERAL_FILE_COLLISSION
ERROR: UpdateOrderFromFileList: MAIN OS Update: MAIN OS Update Failed with HRESULT : 0x8018001e
=====================================================================
GOOD PACKAGES AND BAD PACKAGES LIST
=====================================================================
UpdateOrderFromFileList failed with code 0x8018001e
BAD PACKAGE: I8700DTMKI4.cab.pkg ERROR CODE: 0x8018001E Total number of Bad Packages: 1
Process Failed with code 0x8018001e
UpdateValidator finished at 06:30:19 02/28/1980
================================================
START OF ULDR \ UPDATEAPP ERROR MESSAGES
ERROR: 0x8018001e : Updatevalidator in ULDR reported this error. Update cannot continue.
ideas on how to avoid it???
yes, i had the same error, just follow the instructions on that page, install the older mango version
here is the post where you downgrade your mango rom.
http://bit.ly/pK0v0N
Beware!!! If you follow the instructions in that post you will void your warranty, your new rom will be a T-mobile german rom (you will have to manualy change the language in english), t-mobile also will be all over your phone, lot's of crappy apps that you will have to uninstall manualy! Your search provider in internet explorer will be a combination of tmobile and german google, you can change that in the settings menu.
Direct Link for the rom Download http://bit.ly/tvsHop
In the archive you will find a bunch of files.
* WP7 Downloader Ver 7.41 for Publish (Add OASIS Latin).exe
* Samsung_Mobile_USB_Driver(V5.2)_V1.2.1050.0.exe
* PDA_I8700XXKH2_sec.nb0
* I8700XXKG2_02_RC1.bin
* I8700DTMKH2_ENG.PKS
* EBOOT_I8700XXKH2_CO04_REV02_sec.eb0
* CSC_I8700DTMKH2.csc
First unarchive in a folder.
Then install the samsung mobile driver (if you don't already have it)
Open the app WP7 Downloader Ver 7.41
load everything like in the attached photo
put your phone in download mode (with phone turned off press volUp+cameraButton and then power up while keeping those buttons pressed)
connect the phone and press start. Don't do any funny stuff on your pc. I prefer to do that on a laptop with full battery charge and plugged in!
After this install your phone should look like this :
Software: windows phone 7.5
os version: 7.10.7720.68
firmware revision number: 2424.11.8.2
hardware rev number: 3.15.0.4
radio soft. vers.: 2424.11.7.2
radio hardw. vers.: 0.0.0.800
Bootloader: 5.8.0.8
Chip SOC version 0.36.2.0
Now you can update to the new T-mobile rom that has thethering enabled!
thanks for the info but I think i will just wait for an official unbranded update maybe...
My omnia was a branded T-mobile DE before and i unbrande just because i don't like splash screens of something I'm not using
It's like having a bmw with a ducati engine
I have a tablet with no 3g so i was kinda desperate!