Related
Ok ive got an xda2i and mini s.
I have tomtom on the 2i (not changed it over to the mini s cos i like the larger screen) I want to get a stereo head set for use on the motorbike so i can listen to music, also want to be able to listen to tom tom comands. When a call comes in take the call as i pull over. (saves takin off the helmet).
Does the xda2i support A2DA?? its standard UK spec with only the O2 upgrades from them.
Now using the jabra 205 headset i have at the mo, i know i can play music (poor quality) and have tomtom run at the same time. Thing is when a call comes in the music and tomtom mute and the call comes through (which is good) but when the call ends the music and tomtom revert to the xda2i. i have to press the button on the headset to switch back.
Is there also a good voice dial for the xda2i.
So if the xda2i does support a2da will it do what i want?? I know that if it will ill have to strip the system and fit it to the helmet (doesnt bother me if it will work as im an electronics engineer)
You can download the audio bluetooth from Broadcom via google (Broadcom Corporation BT-PPC AV is the download you may want to check out).
http://forum.xda-developers.com/showthread.php?t=281310
Can A2DP
XDA 21 support A2DP
gone to that link... thanks. ive dloaded the file but have no idea what to do with it. im serious i have no idea at all. i need complete idiot guide for it.. post in the other location or here, i dont mind
many thanks
cool i got the file installed and have nice clear sound, it switches between a call and wmp BUT if i run tomtom5 the music starts to drop out.. big gaps and the same happens with the tomtom comands. this happens to tomtom even if i dont have wmp running.
getting fed up with this stuff now. at least with the wired headphones it all works....
Did you install any battery monitoring software...
the xda is from a hard reset, tomtom 5.2 installed, then the A2DP cab. thats it.. not even put on my contacts or anything. totaly clean. then added the BT-Q800 GPS and its little test program which only when run is used to find which com port the gps is running on. used the setting from that to set tomtom correctly.
TT tested with the gps fine.
then added the headset. tested fine.
BUT when i try to have both the GPS and headset working thats when it gives up. i have a feeling its going to be something to do with the bandwidth on bluetooth.
The audio starts to chop up as the GPS is connected. Ive not tried it with the wired gps though
What your Roms and Ext, version
OK..I bought this 3.5 mm jack from Seidio one end has the 3.5mm jack other end has the mini usb port that fits into the phone (kaiser)
when I got the adaptor in the mail I noticed the in the middle of the jack is a microphone with a call and end button.....
my radio in my truck has a mp3 input for such things as Ipod or anything that has a output going in to a input....anyway hooked it up (which only took 5 seconds) and BAM.....all of sudden got a phone call .....I heard my dad loud and clear through every speaker in the car ....the little microphone was so clear ....I asked my dad if he could tell I was talking to him through this little mic...he thought I was on my phone....it's so cool hearing your conversation through every speaker in my truck .....and "no bluetooth car kit needed"!!!!!
Peace
mike
I have Interest how much do you want incl shipping to SC
WOW
I'd love try it as my MB has a mp3 jack nd it would simplify things and help me preserve the tilt's battery by not hving the BT radio on!
Thanks for the great tip!
DEM
@mike19722
Check your PM.
Wouldn't mind taking one off your hands.
I've got one of those jacks in my stereo too! I'd love to give it a go!
I gotta get one! I don't see that specific one at the Seidio site though. Can we get a link please? Thanks!
Can you please provide a link or a part number from the website? TIA
mrintegra said:
Can you please provide a link or a part number from the website? TIA
Click to expand...
Click to collapse
Thislooks to be the part...
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=866
Hey guys, here you go. this is the one you've been looking for.... i snagged this one, and it it works great.
http://www.moguldepot.com/seidio-mini-usb-to-3mm-adapter/73A75A2812A.htm
What about getting the sound (driving instructions) in your speakers while using naviagtion SW like TomTom/MioMap/iGO? Can You hear that?
Will this work at same time as You play MP3 on your device?
well, i listen to my mp3's and use selectradio to stream sirius and when i receive a call, it puts the music on hold, i push the button to take the call and then resumes the music when i'm done with the call. as for the nav. stuff, i haven't tried, but i'll give it a shot tomorrow if i remember...
devildogthug said:
well, i listen to my mp3's and use selectradio to stream sirius and when i receive a call, it puts the music on hold, i push the button to take the call and then resumes the music when i'm done with the call. as for the nav. stuff, i haven't tried, but i'll give it a shot tomorrow if i remember...
Click to expand...
Click to collapse
Thanx for Your efford, Please tell me which Nav SW Your are using as well.
I'm currently using Parrot MK6000 car-kit and it's NOT performing as I would like even if it has A2DP support. Meaning due to slow performance of the BT car-kit I'll miss the first spoken words of the driving directions if I use TT navigation SW. So instead of "In 300 meters turn right" I'll get "...urn right" if I'm lucky. I can't change the way to get the sound in the internal speaker of my device. I can just turn off/on sound in TT.
With MioMap/iGO I'll not get the driving directions via BT but via the interal speaker of the device until I start using the Media player. Strange.
Compability with HTC TyTN II according to Parrot:
http://www.parrot.com/usa/support/o.../?idproduct=20&idbrand=41&idmodel=672&etape=3
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Well with mine i have some hickus but it just happpends once a while.
Most irritating about Diamond and BT in my opinion is that wa have no equalizing for it. and the sound setup from the begining is horrible.
Asked here if anyone has a solution before but none replied.
But as far 2 your problem no. And i use a Pioneer system in my car.
Mauser.NET said:
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Click to expand...
Click to collapse
HI
Same was happend with me (Opel), when my battery is low.
orsiga said:
HI
Same was happend with me (Opel), when my battery is low.
Click to expand...
Click to collapse
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Mauser.NET said:
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Click to expand...
Click to collapse
I've a JVC head and my bluetooth has no problem.
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
davemazo said:
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
Click to expand...
Click to collapse
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Mauser.NET said:
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Click to expand...
Click to collapse
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
davemazo said:
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
Click to expand...
Click to collapse
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Mauser.NET said:
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Click to expand...
Click to collapse
Thanks again Mauser. I tried various settings but without any success, I think the phone is just not compatible with the Honda. Having said that I don`t have much luck with bluetooth at all on the phone. More often than not It just won`t detect other bluetooth devices and when it does it won`t send or receive files so it`s time for it to go and I can go back to a trusty Nokia
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Rapier said:
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Click to expand...
Click to collapse
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Yes, I have an Audi UHV 6634. Thank you for the info, I'll try that and post the results here. Though, my car-kit is not the advanced one and I don't have to sync anything with it (contacts or something else). It's most working as a plain hands-free device, no extra functions...speaking of which, I've noticed that on the phone is detected as "hands-free"...why not "car-kit" as I know a car-kit has other functionality as well? This is the "standard" BT device for any audio enhancements (even if it is a car-kit not a BT headset), or I have to activate something to be recognized as car-kit?
Mauser.NET said:
Jetware? I have also limited the phonebook sync to max 5 entries to debug
Click to expand...
Click to collapse
my Honda system doesn`t read the sim I can only dial out via handsfree using contacts i`ve entered into the Honda system otherwise I either have to read the number to the system and it will ring out (most of the time anyway) or make the call on the phone (illegally obviously) cancel the call and then say "redial" and the system makes the call. So uless I`m misunderstanding this setting I don`t think it will help me.
I`ve searched the Jetware website and I couldn`t find a fix for my Honda
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Rapier said:
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Click to expand...
Click to collapse
No thanx! I'm glad I could help
Mauser.NET said:
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Click to expand...
Click to collapse
Hello,
I have a Mercedes car kit and facing the same issue as you: everything works perfectly for a few days when hard-resetting my device, even with my 500+ contacts (they are loaded in less than a minute), but after a few days/weeks I can't get to have my call history or contacts displayed in less than half an hour!
Yesterday I thought I'd just hard reset my device because I had this problem again, but unfortunately it didn't work!
Guess what I have done differently this time: yes, I backed up and restored my call history, which I hadn't done the previous times! So I guess it is indeed related to the call history, but I can't test for now!
I have installed JetWare and limited the call history to 5 numbers, I'll try this tonight and I'll keep you informed...
Hello,
So I have tested this yesterday (installed Jetware and limited the call history to 5 numbers), and now it works FLAWLESSLY! I can browse through my 500 contacts instantaneously when I pair my phone with my Mercedes car kit.
So, in my case it was also clearly the CALL HISTORY that was causing problems... A BIG BIG thanks to Mauser for pointing out this!
I'm also having problem connecting my Diamond to my Volvo S80. All the other functions work except that I could not hear the other party through my car stereo and I also could not diconnect the call with my car end key.
I'll try the Jetware and I'll report back later. Thanks for the pointer.
turt said:
A BIG BIG thanks to Mauser for pointing out this!
Click to expand...
Click to collapse
No thanx! ... glad I could help
Hi Guys,
i have this problem for a long time and didn't find anything about it in web or in xda forums.
I have a HTC Dream + HBH-IS 800 Sony Ericsson Headset.
When i listen to music via A2DP the connection is not very stable...
the connection interrupts very often for about 2 or 3 seconds, then works for about 3 seconds.
This only happens when i am outside, not in buildings. I this the reason is because of interferences. The connection gets better when i move the G1 into a specific orientation (upper side up) and don't turn my head to the right
On my old Windows mobile phone i played around with bitpool (=ratio between quality and connection stability by constant bitrate) settings... is there a possibility to get the connection more stable, when playing around with this setting?!
How can this setting be changed on android?
Further information:
-ROM Cyanogen 4.2.5 but same problem on stock ROM
-HTC Dream has been replaced one by a new device -> same problem
-Headset was never exchanged, but worked perfectly on my old Touch Pro with WM 6.1
Thanks for your help
There is a known issue on the Bluetooth stack and is suppose to be fixed in the Elclair 2.0 fix, the temporary work around is to first pair and connect then disconnect and reconnect it again i'm having to do that several times a day when i use my RocketFish bluetooth stereo headset. Hope that helps
thanks for this workaround, will try it tomorrow and will post if it works for me too
hmm, didnt really work for me... no change after pairing disconnecting and connecting again.
i wonder why this only happens outside, not in buildings... another frequencys which interferences maybe?!
Be sure to disable wifi.
Not trying to hi-jack your thread. If you want me to open another i will. However this is a BT question as well.
my G1 is set to connect to my stereo in my car. Pioneer BT head unit. I find that i have to manually tell it to connect every time i get in the car. When i had a blackberry before it would just connect every time on its own without me doing anything once i made the initial connection.
Any ideas?
thanks.
Press1Now said:
There is a known issue on the Bluetooth stack and is suppose to be fixed in the Elclair 2.0 fix, the temporary work around is to first pair and connect then disconnect and reconnect it again i'm having to do that several times a day when i use my RocketFish bluetooth stereo headset. Hope that helps
Click to expand...
Click to collapse
Worked on Dell Streak A1.6
I have Dell BH200 headset as well, and I have the same exact problem its like the audio stutters but when I first connect it its more stutter than music so you can barely even understand the music until after 30secs when it starts to normal out.
ATM im runnning Stock 1.6 for G1, im going to try Cyanogenmod 6.0 tomorrow and see if anything changes.
but everyday I go back and forth with my laptop and phone since my headphones run for atleast 3-4 days.
wow, finally someone having the same problem.
and even the same description of the connection issues.
I recently bought a orange SanFran and, as the device is fairly cheap, a nokia bh-504 along with it.
The connection isnt stable even when I put it in my breast pocket.
As soon as I move my head to the right, the streaming stops. Completely.
I can easily stop the music when holding my hand in front of the right earpiece.
so i will try the disconnect / connect again "workaround", but I don't think that will help.
I paired the same headset with my gf's netbook and I could walk through the whole apartment and the signal was stable even through up to 4 walls.
so no one here knows how to tweak BT settings in android?
Hey guys, i`ve been browsing the site for a while and thought it about time to make an original contribution. I was looking for a blue tooth headset and my searches here lead me to the MW600. quite a few people were asking about it so i thought it a good opportunity to give my review now that i have one!
from the start then, i bought this as i have a very nice pair of headphones i wanted to use with the phone, but could not be doing with cords. most bluetooth headsets have their own headphones which i get along with even less. this seemed a perfect solution to both problems.
the box it comes in is flimsy at best, indeed the plastic tab to hang the box on is completely lose, useless for hanging up in a shop.
out the box, its a lot smaller than i imagined but a bit thicker too. it comes with a charger that handily also fits the HD2 which is an added bonus and un expected!
when i paired up to the phone i was very surprised to find that the unit displayed the song info correctly. i honestly did not expect this to work outside of a sony erricson phone but it works! the next track and previous track buttons work as well, as does the play and stop buttons.
the hands free works fine as well with the person who called me not knowing i was on a hands free.
the volume control is awful, they decided to use a slider that half the time does not register me raising the volume and when it does its impossible to get the right volume setup, its either too high or too low and the slider is too imprecise to get the setting i want!
I cannot comment on the enclosed head phones as i never used them!
When i play some music through the device ( and that is of course what its for) the results are slightly dispaointing. the sound is okay, but that is about as best as i can describe it. maybe its because i am spoilt by the good quality output from the 3.5mm jack on the phone, maybe i am just used to having some EQ on (which the unit does not provide for and the phone says it cannot apply `audio booser` without somer thing being plugged in the 3.5mm jack) but the bass is there (thanks on no small part to the ehadphones rather than the unit) but the mid seems `transparent` with no real hit and the highs are annoyingly 'sparkly'. This os of course my opinion, and others may find the output perfectly fine and for comparison i also do not like the output of ipods as i find their mid lacking as well so if your happy with i pod output you maybe happy with this units output,
I have never needed to re charge the unit yet after 3 days of having it and listing to it in the morning for 2 hours and on the way home for an hour so the battery seems quite good.
I love the unit but the quality of the output means i will only really use it when i have to, prefering to use the audio jack output, i am however going to look into how the unit works as i suspect the phone is sending SBD encode audio and not the native mp3. if i can ge tthe unit to decode MP3 and the phone to send mp3 then i think we have a winner!
For reference i used CD originals encoded to lame 3.98 -V1.
just ordered mine. thanks for the review. i will also post up my opinion of the headset when it arrives. if it is as good as the include wired version, that will be good enough for me.
Hey thanks for the review as I'm getting one but you didn't speak about the radio does it work? anything else? cheers mate
Thanks for your review.
But could you edit it so that it's not so hard to read?
Spaces between a few sentences would suffice.
Thanks for the review, install WOW SRS and it should improve the sound quality via bluetooth but it will kill audio booster when plugged with the 3.5mm jack and always use WOW SRS.
Vrery nice, all working apart from Cyberon voice dialer, you can initiate Cyberon voice application by clicking the phone button on headset but can't pass voice to the phone as it doesn't recognize voice. It looks like the problem relates to cyberon not mw600.
idonxda said:
Vrery nice, all working apart from Cyberon voice dialer, you can initiate Cyberon voice application by clicking the phone button on headset but can't pass voice to the phone as it doesn't recognize voice. It looks like the problem relates to cyberon not mw600.
Click to expand...
Click to collapse
It's a problem with the HD2 bluetooth stack. I managed to get it working with a new radio, a Miri ROM & a modified Cyberon cab
MrGubby said:
It's a problem with the HD2 bluetooth stack. I managed to get it working with a new radio, a Miri ROM & a modified Cyberon cab
Click to expand...
Click to collapse
Hi Thanks, can u plz tell me the version of radio and rom? i need everything to be working!
Anyone else had any experience of this device on HD2? Probably going to but one but would like more reviews before I do.
idonxda said:
Hi Thanks, can u plz tell me the version of radio and rom? i need everything to be working!
Click to expand...
Click to collapse
Hi, I'm using a Miri 6.5.x ROM version V.10 with Radio 2.08.50.08_2
MrGubby said:
Hi, I'm using a Miri 6.5.x ROM version V.10 with Radio 2.08.50.08_2
Click to expand...
Click to collapse
Hi i can not seem to find v10 only see 6.0 and 7.0 any chance of a quick tutorial aswell. Someone else installed duttys rom for me. Advise please as i would like to get this bluethooth button working with cyberion voice using Sony Erricson MW600 stero head set.
The links to the modifyed cabs also please.
badman112 said:
Hi i can not seem to find v10 only see 6.0 and 7.0 any chance of a quick tutorial aswell. Someone else installed duttys rom for me. Advise please as i would like to get this bluethooth button working with cyberion voice using Sony Erricson MW600 stero head set.
The links to the modifyed cabs also please.
Click to expand...
Click to collapse
The Miri V10 ROM is on the HTCpedia forums (I think it is V11 now, not tried it)
Just got mine, tried it and I have to say:
THE MUSIC QUALITY IS CRAP!!!!!
headphones arrived today. WOW. excellent audio and far better than oem headphones. have yet to play with it on radio etc, but so far very impressive.
I have a problem
After the end of any audio file
Lose "stereo audio" connection
and have to push the play button to reconnect "stereo audio"
and also
After the end of calls
Lose "Hands Free" connection
and have to push the Talk button to reconnect "Hands Free"
but if i received a call
"Hands Free" reconnect automatically
But there is a delay for two seconds
I do not know this is normal?
Like power autosaving!!!
this is definately not normal. mine works flawlessly. no need to reconnect ever. i would suggest checking your bluetooth settings and pairing settings again to make sure everything is correct.
I am using smartWatchM with Sony Ericsson MBW-150
I think there is a conflict between the Watch and mw600 connection
The problem is from latest windows build (23569) & (21903 )
When i go back to an old build like (23519)
There is no conflict between the Watch and mw600 connection
Waiting for a solution to this problem or update for Windows without problems
Delays
Does anyone else experience a 3-5 sec delay when the HD2 jumps 1 song/chapter forward?
My combination gives a this delay, which is especially annoying when listening to audiobooks!
I miss a few seconds of every new chapter, need to manually jump 1 chapter forward and the back again.
Does not appear when manually going forward/reverse only when HD2 is in control.