My current situation is that i just got the Qtek 9000, only problem i am experiencing so far is that it wont recognice my sim card... It states that there is no sim card in the mobile...
My curret rom is the english edition
WWE
R 1.03
G 42.36.P8
D 1.13.64
Problem partially solved
Found the problem, that my sim card is a 16 bit, and the Qtek 9000 dosnt support 16 bit, but 32 bit...
Related
Hey guys iam planning to buy 2gb mini sd , my question is wheather mini s will act strange if i use it currently iam using 512mb (its very uncomfortable to use).
So guys pls say me will it slow my ppc or it will be normal like now (with 512mb).
Im using a 2 gb mini sd in my qtek 9100 right now without problems.
No, it works fine, I manage 3 Wizards all of which have 2GB miniSD cards. They sometimes won't detect but I find this is an issue with the port rather than the card. You just need to re-insert it multiple times.
surfer said:
Im using a 2 gb mini sd in my qtek 9100 right now without problems.
Click to expand...
Click to collapse
No, it works fine, I manage 3 Wizards all of which have 2GB miniSD cards. They sometimes won't detect but I find this is an issue with the port rather than the card. You just need to re-insert it multiple times.
Click to expand...
Click to collapse
Thnkx man tommarow evening i will be using 2gb card with faria rom (latest 8mb rom) i hope everything goes fine!!!
i have 2 gb sandisk card no probs here
run 02 xda mini s with qtek rom
hi all... I have a problem with my treo 750v,
since yesterday the device is keep searching.
Can anyone tell me what to do??
Thank you...
you should check your SIM card, it may have been loose from the slot. If not put another SIM in to see if your SIM in corrupt. Then you can figure out if the problem is with the device itself.
I already try diferent SIM card but still the same...
I have upgraded my Qtek 9090 to WM6. After that I also upgraded the radio to 1.15.
But when I removed the battery to insert the SIM card the bootloader didn't show the R 1.15.
The radio as I presume was loaded on the nonpersistant memory for some reason. I asume this because the backup battery of the device was drained at that time.
My question is how can I install the radio to the persistant memory of the ppc?
PS. The method I used to upgrade the radio was the second one from the wiki instructions.
I got Qtek 9100 wm5 pda, I am trying to upgrade to htc kitchen wm6.1 rom. As per various instructions given in XDA developers, I am trying but when update bar reaches 99%, in my PDA bar turns red and in pc it shows an Error, and later gives instruction for recovery, i did repeated this several times, but same problem occurs.
What do you suggest me? either rom is not appropriate for my Qtek 9100 or there is another problem?
PDA specifications are following:
Qtek 9100, with wm 5
PU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004295703
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
2dea5f7e - 1.87G (0x77e60200)
0e9e43aa - 9.99M (0x9fd800)
8ea9d13a - 43.24M (0x2b3e000)
0fb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
2fb25fba - 3.06M (0x30fc00)
kindly help me...........
same problem..
Hi !! I have the same probelm .. have u found another rom wm6 for ur qtek 9100 ??? If u have please tell me witch one .. I cant find any .. thanx !!
here you go
jaffer707 said:
I got Qtek 9100 wm5 pda, I am trying to upgrade to htc kitchen wm6.1 rom. As per various instructions given in XDA developers, I am trying but when update bar reaches 99%, in my PDA bar turns red and in pc it shows an Error, and later gives instruction for recovery, i did repeated this several times, but same problem occurs.
What do you suggest me? either rom is not appropriate for my Qtek 9100 or there is another problem?
PDA specifications are following:
Qtek 9100, with wm 5
PU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004295703
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
2dea5f7e - 1.87G (0x77e60200)
0e9e43aa - 9.99M (0x9fd800)
8ea9d13a - 43.24M (0x2b3e000)
0fb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
2fb25fba - 3.06M (0x30fc00)
kindly help me...........
Click to expand...
Click to collapse
hi there!
first of all your device is still locked
you wont be able to give it a new OS unless you UNLOCK with soft SPL or HARDSPL
thn you will be able to do as you wish
Good luck
4 you 2
debastien said:
Hi !! I have the same probelm .. have u found another rom wm6 for ur qtek 9100 ??? If u have please tell me witch one .. I cant find any .. thanx !!
Click to expand...
Click to collapse
hi there!
1st of all unlock the device if need to be unlocked!
2nd try the "SEARCH" button instead
3rd try on XDA2 roms or CRACING roms or SNN roms or ANGEL roms, perhaps PDAviet, maybe aonther ones i cant remember now
life goes easier when people search dont you agree???
GOOD LUCK
I M NEW HERE ! I HAVE QTEK 9100 WM5 AND I HAVE QTEK 9100 ROM FILES IN MY PC BUT MY DEVICE CHARGING / USB CHIP IS BROKEN AND I CHARGED MY BATTERY VIA MULTI CHARGER ! I WANT TO KNOW ANY POSSIBLE WAY TO UPGRADE IT VIA BLUETOOTH...
I DOWNLOADING TWO SOFTWARES FOR UPGRADE CAN ANYONE TELL ME WHICH ONE SHOULD I INSTALLED ON MY DEVICE???
QTEK 9100 ROM WITH PUSH EMAIL OR RUU_Prodigy 3821 382124 026911 TMO HR WWE Ship
AND IS IT SAFE TO UPGRADE IT OR NOT???
PLZZZ HELP MEE
MIR MOHIB said:
I M NEW HERE ! I HAVE QTEK 9100 WM5 AND I HAVE QTEK 9100 ROM FILES IN MY PC BUT MY DEVICE CHARGING / USB CHIP IS BROKEN AND I CHARGED MY BATTERY VIA MULTI CHARGER ! I WANT TO KNOW ANY POSSIBLE WAY TO UPGRADE IT VIA BLUETOOTH...
I DOWNLOADING TWO SOFTWARES FOR UPGRADE CAN ANYONE TELL ME WHICH ONE SHOULD I INSTALLED ON MY DEVICE???
QTEK 9100 ROM WITH PUSH EMAIL OR RUU_Prodigy 3821 382124 026911 TMO HR WWE Ship
AND IS IT SAFE TO UPGRADE IT OR NOT???
PLZZZ HELP MEE
Click to expand...
Click to collapse
better you try to flash rom Via MicroSD Card
how man my card corrupt and card reader doesn't pick it!!!!
Better to discard the brick and buy a phone.
I don't mean to be cruel, but honestly if your SD card doesn't work and your USB doesn't work, I believe there is no way to flash a new ROM.
MIR MOHIB said:
how man my card corrupt and card reader doesn't pick it!!!!
Click to expand...
Click to collapse
look at how to repair corrupted sd card? --- > http://forum.xda-developers.com/showthread.php?t=367912
brother i have seen it but still no help my original problm is ths
i formatted my card using card studio in qtek 9100 it formatted 100 % but when i attached it on the card reader then to PC! PC doesn't show this cardddddd help meeee
MIR MOHIB said:
brother i have seen it but still no help my original problm is ths
i formatted my card using card studio in qtek 9100 it formatted 100 % but when i attached it on the card reader then to PC! PC doesn't show this cardddddd help meeee
Click to expand...
Click to collapse
whether card reader ( without SDCard ) recognized on your PC ??
yes i formatted my brothers micro SD card very easily using card reader but when ever i entered my card PC doesn't show????
MIR MOHIB said:
yes i formatted my brothers micro SD card very easily using card reader but when ever i entered my card PC doesn't show????
Click to expand...
Click to collapse
here, try with SD/SDHC Memory Card Formatting Software and you can get it at http://panasonic.jp/support/global/cs/sd/download/sd_formatter20.html
Hello to all,
I have big problem with my BA GSM... I have done a lot of research but I can't solve my problem...
I have upgraded my BA (SPV M2000 ORANGE UK) from win 2003 SE to Win 6.1, Win 6.5 Win 5... But in all ROM versions I don't have a possibility to make or receive call... Phone is on automatic search for network and always founds my home network, but when I'm supposed to receive a call, network is going down (just loose it). When I want to make call same thing happens. When I switch to manual searching for network I get this message: "Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again"
I have tried to change radio ROM to every version you have on forum (right now I am on last 1.15), but still same problem.
When I was on the win 2003 SE, I have to use unlocker to make GSM working and that is working just fine... But when I upgrade to any other version of ROM or radio ROM, GSM doesn't function like it should...
Device information for my BA:
Operatior Version: wm 6.1 ppc Pho...
ROM version: Black Skin HT4...
ROM date: 08/08/08
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM version: 1337.45
ExtROM version: Black Kernel
Model no: PH20B
Many thanks in front for any idea
Try going back to the original ROM or reflashing you current one. I had a similar problem where my sim was not inserted completly and would keep dropping in and out.
Thanks for respond I already tried to change sim card, but same thing happened... I don't know where I can found the original ROM for my SPV M2000 orange UK to try to fix my GSM... Does anybody now where I can found the original ROM for my baby ?
Here are 2 places for the original ROMs, also with original radio ROM.
http://firmware.atspace.com/Blueangel.html
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Thank you for help, I restored phone to shipped ROM RUU_v2.5_OrangeUK_v5.40.1.179.ship and everything works fine... I have don't have any problems..
Is that mean that now I can't upgrade my windows to any other windows for my phone, or I should try again with some differed ROM...do you have any idea what is best ROM for my BA ?
Working Device information:
Operator version: 5.40.1.179
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.06.02
Protocol version: 1337.38
ExtROM version: 1.40.179 WWE
You should be able to upgrade to other ROMs, I am not to sure why you had the problem with so many different ROMs. I use xplode's R7.1 WM6.5 ROM, but there are other to use. swampy395 also has a pretty good 6.5 ROM.
http://forum.xda-developers.com/showthread.php?t=482997
also make sure to remove the sd card AND the sim card from the device before upgrading and have the battery charged 100%, that should do the trick
please delete
Unfortunately its impossible to change ROM...I tried every Xplode ROM from ver 5 to 6.5, and also I tried swampy395 ROM... Always the same problem remains - GSM drop after I try to call or receive phone call, and after that, no SERVICE at all... I switched to every radio ROM from 1.00.00 - 1.15
I think I'm doing everything ok:
1) removed SIM card & memory card and confirmed that battery is 100% full
2) Entered bootloader and start MaUpgradeUt_noID
3) After upgrade is finished, I have done hard reset and entered in boot menu then do NO YES YES
4) After system is normally booted, I inserted SIM card, switched phone ON and reset it after that, because radio ROM need to boot also
And that's the way I have done upgrade
wow, that's a tough one.
question: i saw, the shipped rom you used, was orange uk, is your phone actually a british orange branded one, or was that just a test shipped rom?
have you ever, in wm2003 or wm6 tried running xda unlock? http://forum.xda-developers.com/showthread.php?t=240784 to get a sim unlock or just for fun?
and let me just throw one more thing in the discussion, the newer roms seem to support newer sim cards that wouldn't have worked with wm2003, maybe that is true the other way around as well, maybe your sim card is too old to work in "your new phone". happened to me once with another phone. contacted my operator and they sent me a new sim card, with the same number. a copy of my old card, just on the new ones.
have you ever tried it with another sim card?
wow, that was all i can come up with, your problem is really complicated and you already tried so much yourself, there is hardly anything to suggest anymore
Chef Tony my friend,
I have to unlock my phone when I receive it from UK (ORANGE UK is phone for sure) I do unlock with xdadev_all_unlock-v1.6_138.exe and its successful. I do unlock again for many times with new ROMs but nothing happened. I also try 4 different SIM card and there is no change... I will contact my network operator to see what they think...
Many thanks for helping me
Hi there. Have you solved this problem?
Best regards
Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before
Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before
And after i upgrade the rom my youtube player doenst work!
please make sure, you tested all the things suggested before. plus after posting three posts in a row, i would have expected a little more information, like rom version, country, carrier, radio version and so on. there is nothing new to say, if we have to guess everything.
about youtube, well, that depends on what rom you are using, you might even be able to just go on the site in your browser, of if you want a faster and more reliable solution, try -=this=-
Im still on wm2003... there is no solution for me