Database Develop

T-Mobile MDAIII english Version hangs on Boot loader V2.01

Hi to all,
after a few hours i read some posts for "how to upgrading" a MDAIII i give up.
I had to try update my englisch MDAIII from T-Mobile with the boot loader Version 2.01 to the actually german Update. the update fails, and now the MDAIII starts allways with the Boot loader. (first serial, and when i put it into the cradle with USB v2.01
So i will test some tips from this great forum, but nothing it works,
when i will update with a standard update file the display of my mda
displays Radio Stack update and my PC tell me after a while "please contact your Vedor for helping"
I have nothing idea how i become my MDAIII run again.
(With english or german OS)
normaly i think i must use the normal Update from T-Mobile?
But which? My MDAIII is english, but i don´t know it is come
from united states or from england or...???
can i update the boot loader to 2.06?
Now i´m very tired about this.,, uhhh i see im not a expert.. ;-)
Know´s anyone a solution to run my MDA again?
(i have not make a Backup before :-(((
best greetings to the far world!!
Joy

http://forum.xda-developers.com/viewtopic.php?t=15168&start=75

Thank you a7.
first all is the same problem. when i will boot the new firmware, the message diplays on my computer "please contact vendor for helping"
(at the first step from the update software - the radio update)
but:
i renamed the file radio_.nbf to radio_.nb
after restart the update utility the mda is flashing !!
but the radio version is now always old ;-)

U renamed radio_.nbf & it didn't flashed Radio.
I haven't seen that msg "please contact vendor for helping". May be u need 2 flash Radio 2 version 1.06, & then 2 1.06.02.

Thank you, i will try.. it later..
My phone Version is actually:
ROM-Version 1.22.01GER
ROm Datum 10/26/04
Radio Version 0.91.00
Protokoll Vers 1337.27
ExtRom 1.22.118 GER
I musst patch the keyboard layout again ;-)
(English MDAIII with now - german MDAIII Software) ;-)

puhh, tht is not very easy..
i cannot update the radio.
PH20B 0 B GER R 00000000  
   1.22.01 0 1 1.22.118 0.91.00 91.00
and bluetooth not work with Licence sold out...
sometimes i need a better english vocabulary.. sorry..

When always i become a problem with update the radio:
is this a problem of the old Boot loader Version 2.01?
or is this a another Problem?
can i fix this problem with update the MDAIII over SD Card?
Best greetings to all ;-)

Pls help - XDA & Error 100 (Upgrading to WM5)

Hi,
i was using xda 2s, with WM5 (old-build) and several months ago, unaware followed this link:
http://forum.xda-developers.com/showthread.php?t=274505
somehow, i've managed downgrade to WM2003SE again,
using this link:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
(ROM: 1.40.00 WWE
ROM date : 03/10/05
Radio: 1.12.00
Protocol ver: 1337.42
ExtRom: -blank-).
running this version the Bluetooth cannot run, 'license expire'.
Later, I want to try the new ROM (looking for the one with direct push-mail feature) of HELMI in this link:
http://wiki.xda-developers.com/index.php?pagename=Helmi.
When running BAupgrade, received error:
Error 100: Model ID Error 25-N-10-N-N
("the ROM image that you are trying to use is not designed to work with your divice. please check the vender web site and download the correct ROM update")
then tried to run with MaUpgrade, it seem work, but no upgrade at all.
Somebody pls help..
Thank you very much.

u need to use MaUpgrade_NoID instead. it should be on the wiki website somewhere.
also remove the SD card from the slot before doing the upgrading.

Unfortunetely, MaUpgrade_NoID did not work..no upgrade at all..
is it normal if 'Ext ROM : -(blank)-'?
from Start - Settings - System - Device Info
thank-u

Help XDA2s CID preventing me from upgrading with official rom

Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
However, i am stuck halfway. Here is my Devicetype.txt file description. Only managed to get the Devicetype as PH20B, Language ID = WWE. The rest of the info I can't really make out.
Also, when i use the file : xda2nbftool -t -x,
it gave a warning for ms_.nbf
The rest of the files such as nk.nba and radio.nbf were ignored. See pic.
How do i get the rest of the hex addresses for the radio and nk files ?
Could someone help to generate the final nbf files for me or help advise ?
The Official ROM file versions are here :
English ROM
ROM: 1.40.00 WWE
Date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM: 1.40.923 WWE
MMS: 2.0.0.21
BT: 1.0.0 Build 3900
Can anyone help ?

More information on my existing XDA2s firmware :
ROM Version : 5.04.09.WWE
ROM Date : 11/02/06
Radio Version : 1.15.00
Protocol Version : 1337.45
ExtROM Version : (Left Blank)
Never really heard of ROM Version 5.04.09.WWE. And SDIO Card is not detected. Would like to downgrade to the official ROM as i suspect that the SDIO Drivers are not installed in the existing ROM.
Also, i tried using XDAtools\OSimagetool to copy another XDA2s firmware to this XDA2s. But it failed to write generating an error in the pic. Status of Activesync is connected.

mtnbikefreak said:
Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
Click to expand...
Click to collapse
I'm afraid you have read the wrong homework. Those directions are for the Himalaya & Andes, not the angel.
What OS is on the phone now? That will help point to the correct directions needed to reflash the phone.
Flashing to 2003 from WM5 or 6 will vary depending on if the extended ROM has been resized, etc.
Check the angel getting started in the wiki (It's working now)
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted

Oh ... thanks for pointing that out. To answer more questions :
It's running on a generic Windows mobile 5.0. I have a feeling that the Ext rom is already corrupted as the gsm portion of the phone is not functioning properly. I'll do a readup and revert my results. Thanks.

here's the thing. if you have a problem with the CID... all you have to do is find the exe file here named MAUpgradeUt_NoId.exe... use that instead of the exe provided in your Official Rom, i guess that would be WM2003se you are installing.
afaik, extrom havent have a thing to do with the GSM.

Thanks for the reply.
Thing now is that i am trying to downgrade from wm2005 to wm2003 (o2 official asian rom v1.42) But then looks like i am trying in vain.
Tried to do what is in the directions for wm2005->wm2003 by setting it to bootloader mode, doing a hardreset and using maupgrade_no_id with the official nk.nbf
But then it hangs while the check is being done. The xda2s screen shows v2.08 and serial. It changes to usb once the usb cable is plugged in.
Is there any other method i can do to downgrade it ?

help on my Qtek 9090 please

hi
i have QTEK 9090 (PH20B) with wm2003SE
ROM version 1.40.00 WWE
ROM date 03/10/05
Radio version 1.12.00
Protcol version 1337.42
ExtROM version 1.40.730 WWE
when I try to connect to my PC ( i try many ) doesnt connect at all only when i put in bootloader it shows USB V2.06
so please help im trying to upgrade to wm 6.1 but doesnt work
Best regards from me

If you want to connect your phone to your PC, your PC needs to have MS Active Sync 4.5 installed on it so it can recognized your phone. if it shows USB V2.06 then you can go on flashing your ROM to the latest one.

sorry connector problem not software
solved

G4 Wizard Noob...<--Needs a little help

Ok so here is what I have. I have the Cingular 8125 Wizard G4. It has WM5 and I'd like to get WM6 on it. I've look around and followed the fantastic instructions here. This is awesome and my thanks go out to all the people involved with it. Now I'm fairly good with computers so this wasn't that difficult or so I thought. I downloaded the Wizard Service Tool which worked wonderfully and then used HardSPL to unlock it. The instructions didn't match what happened exactly but I'm running Windows 7 with a virtual pc with XP SP3. I worked through most of the bumps dealing with that but my problem comes when I'm trying to use the RUU. Doesn't matter which ROM I choose it doesn't do anything. The phone goes to the tri-color Bootloader Screen but it just stays there. I get no progress while running it (Stays at 0%) It did this when I ran the HardSPL but only sat for 30 secs and then it said it was finished. I've tried 3 or 4 different ROM's and they all do the same thing. My cpu runs at 95% percent and only using less than a gig of ram for the process. It says its running....but over an hour and nothing happening doesn't seem right. Not to mention I have to hard reset my phone and then unlock it again before I can do anything. Any reasons for the hang up on ROM update? I'll post the WST device info at the bottom. Any suggestions would be appreciated. Thanks in advance.
CPU: Texas Instruments - OMAP850
MODEL: Wizard
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ee9df4a2 - 5.00M (0x4fec00)
eea9d13a - 48.23M (0x303c000)
afb25f92 - 50.95M (0x32f4000)
efb25f3e - 2.94M (0x2f0000)
6fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000a7720102101c07791b0606ef
Key Index: 2

Nevermind, I figured it out. I pulled my old P4 out and booted up XP SP3 and then was able to upgrade by ROM through it. I'm thinking it was an issue with Virtual XP dropping the usb connection to the device during set up. It's either that or something to do with the fact I was running 64-bit Win 7. If anyone else runs across this email me and I can point you in the right direction cause I now have WM6.5 on my Wizard and not a brick. Thanks.