G4 Wizard Noob...<--Needs a little help - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Ok so here is what I have. I have the Cingular 8125 Wizard G4. It has WM5 and I'd like to get WM6 on it. I've look around and followed the fantastic instructions here. This is awesome and my thanks go out to all the people involved with it. Now I'm fairly good with computers so this wasn't that difficult or so I thought. I downloaded the Wizard Service Tool which worked wonderfully and then used HardSPL to unlock it. The instructions didn't match what happened exactly but I'm running Windows 7 with a virtual pc with XP SP3. I worked through most of the bumps dealing with that but my problem comes when I'm trying to use the RUU. Doesn't matter which ROM I choose it doesn't do anything. The phone goes to the tri-color Bootloader Screen but it just stays there. I get no progress while running it (Stays at 0%) It did this when I ran the HardSPL but only sat for 30 secs and then it said it was finished. I've tried 3 or 4 different ROM's and they all do the same thing. My cpu runs at 95% percent and only using less than a gig of ram for the process. It says its running....but over an hour and nothing happening doesn't seem right. Not to mention I have to hard reset my phone and then unlock it again before I can do anything. Any reasons for the hang up on ROM update? I'll post the WST device info at the bottom. Any suggestions would be appreciated. Thanks in advance.
CPU: Texas Instruments - OMAP850
MODEL: Wizard
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ee9df4a2 - 5.00M (0x4fec00)
eea9d13a - 48.23M (0x303c000)
afb25f92 - 50.95M (0x32f4000)
efb25f3e - 2.94M (0x2f0000)
6fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000a7720102101c07791b0606ef
Key Index: 2

Nevermind, I figured it out. I pulled my old P4 out and booted up XP SP3 and then was able to upgrade by ROM through it. I'm thinking it was an issue with Virtual XP dropping the usb connection to the device during set up. It's either that or something to do with the fact I was running 64-bit Win 7. If anyone else runs across this email me and I can point you in the right direction cause I now have WM6.5 on my Wizard and not a brick. Thanks.

Related

"NO GSM" error after upgrade PDA2K from WM2003 to

Dear folks,
After upgarding my PDA2k from WM2003 to WM5, an error "NO Gsm" was displayed with system boot. Anybody has experience such a problem like this and could resolve it?
Latest Device Information after upgrade:
Oprator Version: AKU3.3
Rom Verion: 5.04.06.WWE
Rom Date: 03/02/05
Radio Version:
Protocol Version:
ExtTom: 13
CPU: Intel(R) PXA263
Speed: 400 MH
Flash: 32 MB
Ram Size: 96 MB
Falsh Chip: 28f128k3
Data Bus: 32 bits
Storage size: 60.30 MB
LCD: 240 x 320 TFT
Colors: 65532
Mode: PH20B
Platform: Pocket PC
Imei:
Caller Duration: Can't be accessed
please help.
Thanks
Happened to me, but disappeared after the first reset.
Brazilian Joe said:
Happened to me, but disappeared after the first reset.
Click to expand...
Click to collapse
________________________
Thanks for your feedback. Idid so mant times; it won't function.
aku 3.3? where?
No Radio ROM / GSM on reset - possibile solutions
I've had this problem too. After playing a few times with upgrade/downgrade to WM5/2003SE, there are some times when a simple soft-reset will work, and sometimes when it won't. You'll know whether it'll give you GSM by checking whether the Radio ROM version is displayed on the boot loader screen (bottom right hand corner immediately after a soft reset) . If it's 0.0 or similar, then try re-resetting -- this may fix it.
I also had a problem where I either installed some really rogue software that ruined the radio somehow, and wouldn't resolve with umpteen resets. In this case, I just flashed the radio ROM again. If this doesn't work, then you may consider hard-resetting, reinstalling the Radio ROM and WM2003 at the same time, then re-upgrading to WM5 if necessary.
My PDA2K did this with all the WinMo 5 roms I used.
What I finally figured out which seemed to work with me, is that if I took the battery off the phone or did a soft reset with the stylus I would not have my Radio Rom.
If I used software to perform the soft reset it worked fine. So I put 2003 back on my phone and it seems to work fine with that.

8125 Not running apps because of certificates

Hello, I just got my 8125 from Cingular
The info on the phone out of the box is :
ROM Version:2.25.11.1 WWE
ROM dare:5/11/06
Radio Version: 02.25.11
Protocol vesion: 4.1.13.12
ExtROM Version: 2.25.11.102
My problem is that everytime I try installing a game or some of the apps, they install fine on either store card or main memory, but when I tried running some of them, like ASTRAWARE games, I get a message saying that I cannot run the program because it is not signed or the certificate is missing.
I tried unlocking the apps with the registry editor, and still get this error.
Also, I would like to know where can I read about how to install a new ROM, particularly the Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* that everyone is happy about...
Thank you !
Steak

What cant i CID unlock?

ello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it. maybe i should use lokiwiz 0.3 instead of 0.2?
Well TIA,
Whatismyphonecalled?
whatismyphonecalled? said:
ello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it. maybe i should use lokiwiz 0.3 instead of 0.2?
Well TIA,
Whatismyphonecalled?
Click to expand...
Click to collapse
What version DOC chip is of your phone G3 or G4 ? What's the IPL/SPL...? of your phone.Download WST tool and run it to determine the DOC chip version of the phone and check the CID Action to verify the CID locked/unlocked status of the phone.
secondly you have not copy and executed the the EnableRapi.cab correctly in your phone.Read the guide to use lokiwiz02b correctly and do the procedure.
its a g3. i just retried and ran the button_rom and now have ipl 1.01 and spl 2.25.
Wizard Service Tool v4.2.1
27/10/07 19:05:33
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: (im removing it duh!)
=> Bootloaders:
IPL: 1.01 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14406.1.1.1)
ROM: 5.1
Registry AKU: .1.1.1
Radio: 01.12.10
Protocol: 4.0.13.23
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
aea14db6 - 10.00M (0xa00000)
2eae9ece - 48.23M (0x303c000)
0fb2bf36 - 51.06M (0x3310000)
afb2bd76 - 2.88M (0x2e0000)
cfb2bd52 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000e1590207310310f706010657
Key Index: 14
All Done.
what do i do now?
Read Dr. P's sticky. It will tell you what to do EXACTLY. Read it slowly and carefully. Your answer is in there.
I say this, not to be a brat, but to explain that the stickies here are very detailed. They tell you what you need to do and why and how. The motto here at xda is READ, Read, read. Anything you do, you do at your own risk. So get to know all about your device, how it works, why you do certain steps...it will save you from having a very expensive paperweight.
And yes, I could answer you without being so cryptic, but as I said, your answer is in the tut that is stickied...and that really IS the best way to learn about your device.
akashastrega said:
Read Dr. P's sticky. It will tell you what to do EXACTLY. Read it slowly and carefully. Your answer is in there.
I say this, not to be a brat, but to explain that the stickies here are very detailed. They tell you what you need to do and why and how. The motto here at xda is READ, Read, read. Anything you do, you do at your own risk. So get to know all about your device, how it works, why you do certain steps...it will save you from having a very expensive paperweight.
And yes, I could answer you without being so cryptic, but as I said, your answer is in the tut that is stickied...and that really IS the best way to learn about your device.
Click to expand...
Click to collapse
YUP !!!
Very well said and exactly what he needs to do,nicely redirected
guys i know. i have read that a zillion times. the problem is is that my SPl doesnt want to go to 1.x. it stays at 2.25. how do i get it down?
whatismyphonecalled? said:
guys i know. i have read that a zillion times. the problem is is that my SPl doesnt want to go to 1.x. it stays at 2.25. how do i get it down?
Click to expand...
Click to collapse
Well,If you say you have read it million times then,sry,you didn't read it carefully,it's very clearly mentioned there in the guide that if it doesn't get down to both IPL/SPL 1.05,try to flash Button's Rom 1.05 a couple of times more,till it gets both IPL/SPL 1.xx,ok So flash button's 1.05 a few times more,it sometimes requires a littlw more tries.
Cheers
k. will do! thanks a million. ill report back after about 5 tries.
7 times already. nothing still spl 2.25. should i give up?
I have same problem. It goes 98% when i run 1.05 rom and it reports error and I have to reload original rom (2.25 from htc site). I read some more and one guy said it works fine if you downgrade from 2.25 to 1.8 and then unlock. However, I have tried to downgrade but it reports that it is already upgraded.
In Dr. P's sticky, I believe it gives an alternate download rom so that in the event that Button's doesn't work, then use the alternate...double checked and YES IT IS...again, read the sticky point by point, carefully...
Quote from Dr. P's sticky--
" 3.. Downgrade your ROM to the Button 1.05. Let it go through the whole setup please...
Note: If your device fails at 98% with a 302 error follow Vippie's advice and try the ***LINK INSERTED HERE IN DR. P's STICKY TO ALTERNATE ROM *** instead. " (Yes, I am a brat by making you go back and re-read the thread to get the link)
Please, we cannot spoon feed you. You need to learn about your device and understand it BEFORE attempting any fixes/customizations. We are not liable for any bricks, what you do, you do at your own risk...so understanding the device is the first and best step, from there you can get your device customizing freak on.
yea the xda mini s one. i tried it as well. well i do it again... thx. i(btw i reflashed THE BUTTON ROM 17 times) im not kidding.
nope. not this rom either. doesnt help.
what do i do now?
whatismyphonecalled? said:
what do i do now?
Click to expand...
Click to collapse
Do a soft reset of your phone,it might work,otherwise ,reboot your pc,disable any anti virus and firewall,get your phone into bootloaders,reconnect it to pc,when usb appears at the bottom pf bootloaders screen,reflash Button's 1.05
tried that. eh, i guess im out of luck.
Are you sure you have a G3 device?? I have not known of this much trouble, except on G4's (they're a whole different animal). Have you gone point by point explicitly?? Could you have missed a step somewhere? Did you make sure that the enable_rapi was done? I'm stretching here...I can't imagine why you are having these issues. I've CID/SIM unlocked at least 5 different wizards using Dr. P's tut, without any issue at all...so I am truly stumped.

Qtek 9100 Rom Upgrade problem

I got Qtek 9100 wm5 pda, I am trying to upgrade to htc kitchen wm6.1 rom. As per various instructions given in XDA developers, I am trying but when update bar reaches 99%, in my PDA bar turns red and in pc it shows an Error, and later gives instruction for recovery, i did repeated this several times, but same problem occurs.
What do you suggest me? either rom is not appropriate for my Qtek 9100 or there is another problem?
PDA specifications are following:
Qtek 9100, with wm 5
PU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004295703
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
2dea5f7e - 1.87G (0x77e60200)
0e9e43aa - 9.99M (0x9fd800)
8ea9d13a - 43.24M (0x2b3e000)
0fb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
2fb25fba - 3.06M (0x30fc00)
kindly help me...........
same problem..
Hi !! I have the same probelm .. have u found another rom wm6 for ur qtek 9100 ??? If u have please tell me witch one .. I cant find any .. thanx !!
here you go
jaffer707 said:
I got Qtek 9100 wm5 pda, I am trying to upgrade to htc kitchen wm6.1 rom. As per various instructions given in XDA developers, I am trying but when update bar reaches 99%, in my PDA bar turns red and in pc it shows an Error, and later gives instruction for recovery, i did repeated this several times, but same problem occurs.
What do you suggest me? either rom is not appropriate for my Qtek 9100 or there is another problem?
PDA specifications are following:
Qtek 9100, with wm 5
PU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004295703
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
2dea5f7e - 1.87G (0x77e60200)
0e9e43aa - 9.99M (0x9fd800)
8ea9d13a - 43.24M (0x2b3e000)
0fb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
2fb25fba - 3.06M (0x30fc00)
kindly help me...........
Click to expand...
Click to collapse
hi there!
first of all your device is still locked
you wont be able to give it a new OS unless you UNLOCK with soft SPL or HARDSPL
thn you will be able to do as you wish
Good luck
4 you 2
debastien said:
Hi !! I have the same probelm .. have u found another rom wm6 for ur qtek 9100 ??? If u have please tell me witch one .. I cant find any .. thanx !!
Click to expand...
Click to collapse
hi there!
1st of all unlock the device if need to be unlocked!
2nd try the "SEARCH" button instead
3rd try on XDA2 roms or CRACING roms or SNN roms or ANGEL roms, perhaps PDAviet, maybe aonther ones i cant remember now
life goes easier when people search dont you agree???
GOOD LUCK
I M NEW HERE ! I HAVE QTEK 9100 WM5 AND I HAVE QTEK 9100 ROM FILES IN MY PC BUT MY DEVICE CHARGING / USB CHIP IS BROKEN AND I CHARGED MY BATTERY VIA MULTI CHARGER ! I WANT TO KNOW ANY POSSIBLE WAY TO UPGRADE IT VIA BLUETOOTH...
I DOWNLOADING TWO SOFTWARES FOR UPGRADE CAN ANYONE TELL ME WHICH ONE SHOULD I INSTALLED ON MY DEVICE???
QTEK 9100 ROM WITH PUSH EMAIL OR RUU_Prodigy 3821 382124 026911 TMO HR WWE Ship
AND IS IT SAFE TO UPGRADE IT OR NOT???
PLZZZ HELP MEE
MIR MOHIB said:
I M NEW HERE ! I HAVE QTEK 9100 WM5 AND I HAVE QTEK 9100 ROM FILES IN MY PC BUT MY DEVICE CHARGING / USB CHIP IS BROKEN AND I CHARGED MY BATTERY VIA MULTI CHARGER ! I WANT TO KNOW ANY POSSIBLE WAY TO UPGRADE IT VIA BLUETOOTH...
I DOWNLOADING TWO SOFTWARES FOR UPGRADE CAN ANYONE TELL ME WHICH ONE SHOULD I INSTALLED ON MY DEVICE???
QTEK 9100 ROM WITH PUSH EMAIL OR RUU_Prodigy 3821 382124 026911 TMO HR WWE Ship
AND IS IT SAFE TO UPGRADE IT OR NOT???
PLZZZ HELP MEE
Click to expand...
Click to collapse
better you try to flash rom Via MicroSD Card
how man my card corrupt and card reader doesn't pick it!!!!
Better to discard the brick and buy a phone.
I don't mean to be cruel, but honestly if your SD card doesn't work and your USB doesn't work, I believe there is no way to flash a new ROM.
MIR MOHIB said:
how man my card corrupt and card reader doesn't pick it!!!!
Click to expand...
Click to collapse
look at how to repair corrupted sd card? --- > http://forum.xda-developers.com/showthread.php?t=367912
brother i have seen it but still no help my original problm is ths
i formatted my card using card studio in qtek 9100 it formatted 100 % but when i attached it on the card reader then to PC! PC doesn't show this cardddddd help meeee
MIR MOHIB said:
brother i have seen it but still no help my original problm is ths
i formatted my card using card studio in qtek 9100 it formatted 100 % but when i attached it on the card reader then to PC! PC doesn't show this cardddddd help meeee
Click to expand...
Click to collapse
whether card reader ( without SDCard ) recognized on your PC ??
yes i formatted my brothers micro SD card very easily using card reader but when ever i entered my card PC doesn't show????
MIR MOHIB said:
yes i formatted my brothers micro SD card very easily using card reader but when ever i entered my card PC doesn't show????
Click to expand...
Click to collapse
here, try with SD/SDHC Memory Card Formatting Software and you can get it at http://panasonic.jp/support/global/cs/sd/download/sd_formatter20.html

Going with DonSolari 3.2 but have a few ???s 1st

Hi all, first off this is my first post here at XDA. Soon it'll be 5, 100, 1000 lol they grow up so fast...
Anyway i'm used to my phone now and I want to get a slimmer version of WM6 runiing on it to free up as much ram as I can for advanced apps like video playing, web, streaming radio, and games. This is my 1st rom flash so I read through the noobie install tutorial and there's just so much to check on first. I bought this 8125 wizard off ebay and it's xingular branded but is already unlocked and currently being used with Tmobile with a sim card in Dallas area and it works fine, web and all but slow running and with weak signal... It is running IPL/SPL 3.08/3.08 and WM6.5 titanium and 3.02.11 radio All done by an ebay member named SHcowboy (what up if you're reading this!) who mentioned being a member here. Here's the specs on the phone before going any further. It's definitely a G3 just wanted to point that out.
Wizard Service Tool v4.2.2
07/10/09 09:14:12
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378002821973
=> Bootloaders:
IPL: 3.08 (G3 device)
SPL: 3.08 (G3 device)
Built on Nov 13 2006 at 14:02:18
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: Unknown
ROM: Unknown
Registry AKU: .5.0.1
Radio: 03.02.11
Protocol: 4.1.13.47
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4e9b4d92 - 9.99M (0x9fd800)
8eadcc42 - 48.23M (0x303c000)
4fb20cc2 - 44.31M (0x2c50000)
efb20af2 - 3.06M (0x310000)
4fb20a9e - 3.06M (0x30fc00)​
The signal sucks so I want to try an older radio when that comes up in the process if it's needed maybe 2.69. The donsolari 3.2 sounds good for my needs so far but other suggestions are welcome for a slimmer/faster running OS.
So what do I need to do with the updating then? Do I need to mess with my IPL/SPL version or SIMunlocking since it's already running unlocked and new IPLSPLs that are currently running wm6.5 titanium or can I just go straight to rom flashing process? I don't want to brick it, that much I know. Do I have to flash with WM5 first still and then flash up to 6?
I appreciate any help.​
Hey man, welcome to the forums!
I'm not a expert to ROM flashing, so I recommend you to wait while someone with more experience can give you some advice too.
For the slim ROM, I have used this one. Pretty fast, light and basic. There's not a bunch of apps I would never use, but still has all I need.
As for flashing the ROM, it depends of the ROM you're going to... Some are safe, meaning you can put it on a G3 or G4 device. If you get a safe one, you can try the soft-SPL hack to flash it. I've used this and worked.
I don't know if you gotta downgrade to WM5, sorry.
Check if the ROM is safe, try safe-SPL, follow the guide on the Wiki... If you are carefull enough, it will all run smooth.
Cool thanks. It's good to hear that the slim rom I was eyeing runs well. I figure I can download whatever apps I do want later on as needed. I guess loading WM5 first is that way to go because that's what it says, I might as well try it that way first.
As far as needing to unlock an already unlocked Sim G3 though.... does anyone know if I need to re-unlock it? And the IPL/SPL too? mine's already 3.08/3.08 and the radio's 3.02.11 already. I want to try a different radio version later unless i need to when doing the WM6 flash.

Categories

Resources