ello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it. maybe i should use lokiwiz 0.3 instead of 0.2?
Well TIA,
Whatismyphonecalled?
whatismyphonecalled? said:
ello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it. maybe i should use lokiwiz 0.3 instead of 0.2?
Well TIA,
Whatismyphonecalled?
Click to expand...
Click to collapse
What version DOC chip is of your phone G3 or G4 ? What's the IPL/SPL...? of your phone.Download WST tool and run it to determine the DOC chip version of the phone and check the CID Action to verify the CID locked/unlocked status of the phone.
secondly you have not copy and executed the the EnableRapi.cab correctly in your phone.Read the guide to use lokiwiz02b correctly and do the procedure.
its a g3. i just retried and ran the button_rom and now have ipl 1.01 and spl 2.25.
Wizard Service Tool v4.2.1
27/10/07 19:05:33
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: (im removing it duh!)
=> Bootloaders:
IPL: 1.01 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14406.1.1.1)
ROM: 5.1
Registry AKU: .1.1.1
Radio: 01.12.10
Protocol: 4.0.13.23
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
aea14db6 - 10.00M (0xa00000)
2eae9ece - 48.23M (0x303c000)
0fb2bf36 - 51.06M (0x3310000)
afb2bd76 - 2.88M (0x2e0000)
cfb2bd52 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000e1590207310310f706010657
Key Index: 14
All Done.
what do i do now?
Read Dr. P's sticky. It will tell you what to do EXACTLY. Read it slowly and carefully. Your answer is in there.
I say this, not to be a brat, but to explain that the stickies here are very detailed. They tell you what you need to do and why and how. The motto here at xda is READ, Read, read. Anything you do, you do at your own risk. So get to know all about your device, how it works, why you do certain steps...it will save you from having a very expensive paperweight.
And yes, I could answer you without being so cryptic, but as I said, your answer is in the tut that is stickied...and that really IS the best way to learn about your device.
akashastrega said:
Read Dr. P's sticky. It will tell you what to do EXACTLY. Read it slowly and carefully. Your answer is in there.
I say this, not to be a brat, but to explain that the stickies here are very detailed. They tell you what you need to do and why and how. The motto here at xda is READ, Read, read. Anything you do, you do at your own risk. So get to know all about your device, how it works, why you do certain steps...it will save you from having a very expensive paperweight.
And yes, I could answer you without being so cryptic, but as I said, your answer is in the tut that is stickied...and that really IS the best way to learn about your device.
Click to expand...
Click to collapse
YUP !!!
Very well said and exactly what he needs to do,nicely redirected
guys i know. i have read that a zillion times. the problem is is that my SPl doesnt want to go to 1.x. it stays at 2.25. how do i get it down?
whatismyphonecalled? said:
guys i know. i have read that a zillion times. the problem is is that my SPl doesnt want to go to 1.x. it stays at 2.25. how do i get it down?
Click to expand...
Click to collapse
Well,If you say you have read it million times then,sry,you didn't read it carefully,it's very clearly mentioned there in the guide that if it doesn't get down to both IPL/SPL 1.05,try to flash Button's Rom 1.05 a couple of times more,till it gets both IPL/SPL 1.xx,ok So flash button's 1.05 a few times more,it sometimes requires a littlw more tries.
Cheers
k. will do! thanks a million. ill report back after about 5 tries.
7 times already. nothing still spl 2.25. should i give up?
I have same problem. It goes 98% when i run 1.05 rom and it reports error and I have to reload original rom (2.25 from htc site). I read some more and one guy said it works fine if you downgrade from 2.25 to 1.8 and then unlock. However, I have tried to downgrade but it reports that it is already upgraded.
In Dr. P's sticky, I believe it gives an alternate download rom so that in the event that Button's doesn't work, then use the alternate...double checked and YES IT IS...again, read the sticky point by point, carefully...
Quote from Dr. P's sticky--
" 3.. Downgrade your ROM to the Button 1.05. Let it go through the whole setup please...
Note: If your device fails at 98% with a 302 error follow Vippie's advice and try the ***LINK INSERTED HERE IN DR. P's STICKY TO ALTERNATE ROM *** instead. " (Yes, I am a brat by making you go back and re-read the thread to get the link)
Please, we cannot spoon feed you. You need to learn about your device and understand it BEFORE attempting any fixes/customizations. We are not liable for any bricks, what you do, you do at your own risk...so understanding the device is the first and best step, from there you can get your device customizing freak on.
yea the xda mini s one. i tried it as well. well i do it again... thx. i(btw i reflashed THE BUTTON ROM 17 times) im not kidding.
nope. not this rom either. doesnt help.
what do i do now?
whatismyphonecalled? said:
what do i do now?
Click to expand...
Click to collapse
Do a soft reset of your phone,it might work,otherwise ,reboot your pc,disable any anti virus and firewall,get your phone into bootloaders,reconnect it to pc,when usb appears at the bottom pf bootloaders screen,reflash Button's 1.05
tried that. eh, i guess im out of luck.
Are you sure you have a G3 device?? I have not known of this much trouble, except on G4's (they're a whole different animal). Have you gone point by point explicitly?? Could you have missed a step somewhere? Did you make sure that the enable_rapi was done? I'm stretching here...I can't imagine why you are having these issues. I've CID/SIM unlocked at least 5 different wizards using Dr. P's tut, without any issue at all...so I am truly stumped.
Related
I have a newly bought Cingular 8125 in India. I would love to Upgrade that.
Though the box says it is for UK, I can use with the service providers in India.
I assume it is unlocked already.(is it really?)
This is my device information at boot:-
IPL: 2.25
SPL: 2.25
GSM: 02.25.11
OS: 2.25.11.1
I am planning to use Molsky.Biz ROM available here:-
RUU_Molski.Biz_226102_22610105_022511_WWE (G3 Device. IPL/SPL like: 2.xx)
I hope my device is G3.
Do I need to CIDUnlock my device? What is the FullUnlock?
Molsky.Biz says:-
" Also DO NOT FORGET to CID UNLOCK your Wizard. This is only possible with LokiWiz 0.2b and
IPL/SPL 1.xx, if you have a CID LOCKED Wizard with IPL/SPL 2.xx.0001 flash a G4 Rom !! "
But My IPL/SPL is not 1.xx as you can see above in my details.
What should I do to unlock? Do I need to do that at all?
and what is meant by AKU? Do I need that?
I sold my nokia and communicator to buy this phone. So dont want to brick it because of my ignorance!
Please guide me.
Many Thanks.
Read this thread and follow it
http://forum.xda-developers.com/showthread.php?t=263116
Your phone is a G3. If the IPL and SPL has more than 2 digits after the first decimal (ie: 2.xx.xx) then it's a G4.
As for unlocking, that confuses the bejesus out of me.
I would say download the G3 ROM, figure out how to unlock your phone (if possible) and then you should be good to go.
You SHOULD be scared given all the threads around here from people who trashed their phones. And I'd bet few of them could give a straight answer as to why they wanted to do so in the first place. So before you do anything, define why you want to update the rom. Does it do something specific that you absolutely can't live without and makes it worth the risk of ruining the phone? Maybe a custom rom is a tiny bit faster but in a day's time, will it make any difference? Probably not, and an operator rom that's a tiny bit slower is still a LOT faster than a dead phone. Don't forget that the moment you start flashing with anything but an operator approved rom, you're out of warrantee. if you absolutely MUST update the rom, then start reading the link above. Every question you asked has already been answered here many, many times. Is your phone a G3 or a G4? Better know BEFORE you start. Oops...you're at 55% and your PC crashes...what do you do? Better know BEFORE you start. The phone reboots and won't go past the splash screen, what do you do now? Better know BEFORE you start.
Thank you all for the replies.
The main reason for flashing it to the new rom was speed and space considerations.
I was owning an XDA Mini earlier and successfully did the BigStorage and Rom updates.
But seeing many users bricking their wizard here and being not sure about the 'unlocking thing' i've decided to atleast not to venture into the bleeding edge atleast during my warranty period.
I know many questions might have been answered many a times, but the answers too are very contextual, they are different for different versions / models etc.
Hopefully I will do it sometime next year!
i would vote the warranty period is the best time to do it.. then you can tell your provider you tried to update their rom and now your phone dont work and let them send you a replacement...
Flashing isnt all that scary, the first time its a little nerve racking, but then again i like living on the edge...
So if your gonna do it, here is a quick simple explanation...
Downgrade to a 1.xx rom from the FTP site, after the your IPL/SPL should show 1.xx during boot up (mine actually differed, had IPL 1.xx SPL 2.xx and still unlocked just fine, some people claim to have issues though)
after successfully booting run lokwiz 2b (its the one i used) do the sim and supercid unlock.
Then reflash a stock 2.xx rom so that you are sure to get the updated bootloaders, after that has completed successfully then flash any rom you want..
its that simple, just a little time consuming
How to copy the cab file(enable rapi) to your device and run it before running lokiwi
Please disreegard below. Just found it.
Thanks..
I am kind of new in this.
I want to unlock the device but do not know how to
copy the cab file(enable rapi) to your device and run it before running lokiwiz.
I will appreciate your help on this so I can continue with the upgrades.
Thanks in Advance.
1 - Unzip lokiwiz02b.zip to somewhere (extract to c:\lokiwiz) in your computer
2. Connect your phone via ActiveSync to your PC . Browse your phone with File Explorer from your PC.
3 - Copy EnableRapi.cab to your Wizard (My Document)
4 - Execute the EnableRapi.cab in your phone. Wait for it to finish
5 - Guarantee that your phone is connected via activesync with the computer
6 - Execute lokiwiz.bat (from your computer run c:\lokiwiz\lokiwiz.bat, double click on that file) and follow the instructions on your screen...
7 - Select Option U to unlock your Wiz.
DUE to the first thread been turned into another unlocking one I had no choice but, to close the project.
But I feel that it is unfair to the people that respect my work an appreciate it.
The response to the rom has been overwhelming!!!! I never see this kind of response to a rom since the blue angel days
once again this thread been trashed with crap.rom is no longer available.next realease is pending.got better things to do with my time.plus time job is takeing most of mine time now and with x-mas coming,gonna get worst. when im ready i will contact the testers.no more tester are neede at the moment.
if you experience power-ups with push email folow.this;
now for users that have the device powering up when push email activated,i have been doing some testing;
i setup my push email [web2mail]
now i have setup the device security with a password,so when it comes from stand-by,will ask for it,
then a setup devicee lock in batterie status to also lock the device [see pictures]
what can i say i works fine.
when i receive an email from my server ,it notefys-me with the email sound ,but the device does not power up as reported.
now when the device lock time out is up,the device wakes up to lock itself
and the powers down in 1-2 seconds -this is normal in this rom atleast.
how to the date in the top right corner ?
use registry wizard[included in the rom] to remove the date or time
to use default clic sound download the file below
remove the .zip from the file name as it's just a cab...thanks dr.p
whats is in my rom?
unlcoking problem
people don't get it and it is really easy to unlock CID if they really follow the threads that there are. This thread says it clearly what u do and it is really easy to do it. Most of the people have update tool problem they can solve that with wizard_ROM update utility_noID file on the FTP site of the XDA. They can just put it to the unpcaked faria RC1 file and run it after unlocking CID. Two steps simple and cristle clear !!
http://forum.xda-developers.com/showthread.php?t=263116&highlight=CID+UNLOCK
/APPLAUDE
Just wanted to thank you for everything so far. Loving the ROM and will continue to provide Beta feedback as much as possible.
hey faria, awsome job i wish i had half your skills. your latest rom has been exeptional, the only issue i had was when i overclocked it the screen would intemitently turn on, oh and the battery meter never went below 57%. any help or sugestions would me much appreciated.
bigdooky said:
hey faria, awsome job i wish i had half your skills. your latest rom has been exeptional, the only issue i had was when i overclocked it the screen would intemitently turn on, oh and the battery meter never went below 57%. any help or sugestions would me much appreciated.
Click to expand...
Click to collapse
how much did you overclocked?
LOL!!!
faria said:
You my requested the rom from me but I will select you according to your posts.
Click to expand...
Click to collapse
LOL! So you will select us according to whether or not we have something intelligent to say. Well, I am about to put your 8mb rom on my MDA (right now using the RISIDRO rom loaded on top of the t-mobile official 2.26 rom) and will let you know what I think. I will be sure to say something smart. I will just blow you away with my intelligence and technical prowess.
I would like to see some articles on the page-pool size thing though. That's a new one to me. Check my post in the original thread (#419). Anyone wanna point me in the right direction? I can only find how-to's and not any reasons as to why one would do this...
So uh ... how do I unlock my phone? I did not get any keys. Are they on the stylus somewhere? I gotta go download a computer.
Portuguese Support
I faria since i`m new in this all new stuff of cooked rooms and extended roms etc; all that i can do is asking how can i help you on your journey, just tell me how i can donate you something for you to continue the great job that i have the oportunity to see in this forum i will be pleased to help with anythig to honor your Portuguese contribute to the XDA, continua o bom trabalho e ficarei a aguardar pelo "lançamento" da tua nova room EXCELENTE TRABALHO.
well I told you I would let you all know if there was a difference that I noticed between the 8mb and 12 mb with the voicemail issues and in-call issues.
with the 12, sometimes in a call, buttons would become usless and had to soft reset to hang up. same thing with the 8.
with the 12, voicemail icon would not go away after voice mail deleted. havnt seen that with the 8 yet.
other than that, speed is good in both, and everything works like a charm.
Jeb
I hope your donations will provide you with at least the ability to take a night off and go to dinner or maybe get a massage to help you forget the newbie questions. I will be sending a donation as well. You have provided an outstanding ROM that has rivaled (and beaten) multi-m(b)illion dollar companies core and "upgrade" roms.
To all those that wish to ask newbie questions, leave faria's threads dedicated to the enhancement and ultimate release of one of the best ROMS for a PPC phone alone.
The least you could do is create your own thread and post your questions there.
I hope I may be considered for future testing granted my moderately new questions have not been classified as non rom related. If so, I will go study some more and apply to faria U at a later time
G4s and the ROMs
Faria, I think I am onto something here. From what I am reading in the posts, and from what you and I discussed the other day about my extended rom not loading correctly, I think and G4 with IPL/SPL ABOVE 2.17.0001 have a greater degree of security. Again, reading the posts in your other thread, it seems a handful of G4 owners could indeed install your rom fully, while the other half would only get the OS. Correct me if I am wrong, but I am starting to see a pattern.
First and foremost I would like to thank Jose for all the time and effort that he put into making this great rom. If and when you come to NYC I am taking you out and getting you twisted VIP style! But enough ass kissing and lets get to bussiness.
I have had very minor issues.
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
After installing all the software extras that was included to check how they worked, I have not been able to keep the phone off. When I say off I mean the backlight staying off when nothing is running. I have tried using the XP feature to turn the light off but it doesnt keep it off either. This could be something that I did so I may just reflash and install everything one by one to see where the problem comes from.
I also have noticed some signal problems but I think that was more of me installing those cabs from the 2.26 rom
Any help is appreciated.
one issue i have noticed is right before the device wakes up it white screens for 2-3 seconds then loads the today screen.. i dont know if this is a issue as i have not seen it really affect anything but i figured id let u know.
peraltah said:
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
Any help is appreciated.
Click to expand...
Click to collapse
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Hello faria. I said eariler that this was a great rom. I think i have found a minor annoyance, i wouldn't call it a bug. It is related to spb time at least I'm pretty sure it is. I get the calnot.exe error every now and again and the cannot locate the spbtime.exe on reset. Its strange everything still works as it should. I think someone else had this problem in the other thread. I thought is was because spb time was loaded on the mem card and the fact that windows is sometimes late in loading it. So my next step was to move it to the sys mem. Same problem, I guessing it is on spb to fix this. I was probably not designed to work well with aku 3.2. Other than I that i could not find any real problems, except one time i uninstalled spb time and i oculd no longer sync. easliy fixed by hard reset no prob. I'm using 12mb pool. I also used your registry tweak program and set all the cache to the highest settings. Do you think that is a bad idea for this pool size. Have noticed some slow down in performance i don't know if the two are related.
thanks for the great rom again man!!
appreciated
jacob-mda said:
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Click to expand...
Click to collapse
I didnt delte it I just ran the other cabs from 2.26 and soft rest it. I think thats where my signal problem came from. I have to reboot to get my signal back.
monadzback said:
well I told you I would let you all know if there was a difference that I noticed between the 8mb and 12 mb with the voicemail issues and in-call issues.
with the 12, sometimes in a call, buttons would become usless and had to soft reset to hang up. same thing with the 8.
with the 12, voicemail icon would not go away after voice mail deleted. havnt seen that with the 8 yet.
other than that, speed is good in both, and everything works like a charm.
Jeb
Click to expand...
Click to collapse
i see a patern emeging here the voice mail/phone buttons seems to be an american thing.now i tryng to find out if its a carrier specific thing.
cptcafne
Faria, I think I am onto something here. From what I am reading in the posts, and from what you and I discussed the other day about my extended rom not loading correctly, I think and G4 with IPL/SPL ABOVE 2.17.0001 have a greater degree of security. Again, reading the posts in your other thread, it seems a handful of G4 owners could indeed install your rom fully, while the other half would only get the OS. Correct me if I am wrong, but I am starting to see a pattern.
Click to expand...
Click to collapse
please contact-me privite go somethig for you .
Timbo_fdw
Hello faria. I said eariler that this was a great rom. I think i have found a minor annoyance, i wouldn't call it a bug. It is related to spb time at least I'm pretty sure it is. I get the calnot.exe error every now and again and the cannot locate the spbtime.exe on reset. Its strange everything still works as it should. I think someone else had this problem in the other thread. I thought is was because spb time was loaded on the mem card and the fact that windows is sometimes late in loading it. So my next step was to move it to the sys mem. Same problem, I guessing it is on spb to fix this. I was probably not designed to work well with aku 3.2. Other than I that i could not find any real problems, except one time i uninstalled spb time and i oculd no longer sync. easliy fixed by hard reset no prob. I'm using 12mb pool. I also used your registry tweak program and set all the cache to the highest settings. Do you think that is a bad idea for this pool size. Have noticed some slow down in performance i don't know if the two are related.
thanks for the great rom again man!!
Click to expand...
Click to collapse
that app has problems in 3.2 roms.
Originally Posted by peraltah
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
Any help is appreciated.
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Click to expand...
Click to collapse
please provide the rigth cab files for the next update.
dreamteam3x said:
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Click to expand...
Click to collapse
im afraid you phone still locked
now put it int bootloader mode and run the latest rom from your provider.
dreamteam3x said:
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Click to expand...
Click to collapse
when u downgrade then upgrade with a 2.26 ROM (IPL , SPL) like moliskis and then upgrade to farias and it will show u
IPL=2.26
SPL=2.26
OS=3.000
jacob-mda said:
one issue i have noticed is right before the device wakes up it white screens for 2-3 seconds then loads the today screen.. i dont know if this is a issue as i have not seen it really affect anything but i figured id let u know.
Click to expand...
Click to collapse
there is a fix for that in page 7-8 in the old thread
LOL! So you will select us according to whether or not we have something intelligent to say. Well, I am about to put your 8mb rom on my MDA (right now using the RISIDRO rom loaded on top of the t-mobile official 2.26 rom) and will let you know what I think. I will be sure to say something smart. I will just blow you away with my intelligence and technical prowess.
I would like to see some articles on the page-pool size thing though. That's a new one to me. Check my post in the original thread (#419). Anyone wanna point me in the right direction? I can only find how-to's and not any reasons as to why one would do this...
So uh ... how do I unlock my phone? I did not get any keys. Are they on the stylus somewhere? I gotta go download a computer.
Last edited by appye : Today at 10:45 PM. Reason: I am cool like that.
Click to expand...
Click to collapse
nice try.but no dice
Hi; I tried to unlock my G3 wizard and now I think I am very stupid.
First, I get CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe and upgrade wizard, on wizard was IPL 1.xx SPL 2.xx, GSM also anything, but OS nothing. Blank line. Then that booted to bootloader.
So I tried RUU_Molski.Biz_226102_22610105_022511_WWE.exe, it wrote IPL 2.26, SPL 2.26 and OS nothing. Then i tried t-mobile rom, but it didn't work, because "only upgrade".
I tried through CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe, so now I have IPL 1.01, SPL 2.26, GSM something, OS nothing (blank line) and I think I'm stupid.
Any ideas? Thank you...
Michalek said:
Hi; I tried to unlock my G3 wizard and now I think I am very stupid.
First, I get CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe and upgrade wizard, on wizard was IPL 1.xx SPL 2.xx, GSM also anything, but OS nothing. Blank line. Then that booted to bootloader.
So I tried RUU_Molski.Biz_226102_22610105_022511_WWE.exe, it wrote IPL 2.26, SPL 2.26 and OS nothing. Then i tried t-mobile rom, but it didn't work, because "only upgrade".
I tried through CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe, so now I have IPL 1.01, SPL 2.26, GSM something, OS nothing (blank line) and I think I'm stupid.
Any ideas? Thank you...
Click to expand...
Click to collapse
Make sure that you have unlocked the device correctly. Read Dr. P's sticky:A Definitive Guide to Unlocking G3 Wizards and also the wiki.
I know that i haven't unlocked my wizard The problem was before that I started unlock... OS disappeared after first flash.
Michalek said:
I know that i haven't unlocked my wizard The problem was before that I started unlock... OS disappeared after first flash.
Click to expand...
Click to collapse
Reflash with the Button 1.05 Rom, if the IPL & SPL don't match after the first flash then flash a second time with the same Rom, that should fix IPL/SPL problems.
Now Unlock your device BEFORE flashng a 2.x Rom.
Dr P's Sticky Thread covers this, please read it throughly..
kyphur said:
Reflash with the Button 1.05 Rom, if the IPL & SPL don't match after the first flash then flash a second time with the same Rom, that should fix IPL/SPL problems.
Click to expand...
Click to collapse
I reflashed Button ROM for three times, I still have IPL 1.01 and SPL 2.26.
kyphur said:
Now Unlock your device BEFORE flashng a 2.x Rom.
Click to expand...
Click to collapse
I can't unlock my device, because I haven't OS...
kyphur said:
Dr P's Sticky Thread covers this, please read it throughly..
Click to expand...
Click to collapse
Hm, in point 7 - Connect your device and cancel the partnership. (You're a guest )
I can not connect my device, because I haven't OS on Wizard, he boots only to bootloader (with IPL 1.01 and SPL 2.26). I can flash from PC, but then I never have OS od MDA.
I read the "A Definitive Guide to Unlocking G3 Wizards" many times, but I dont's see any solution...
Maybe I have strange wizard
When all else fails, flash an official Rom from your Service Provider. That should get you back to working order then proceed with the unlocking from there.
Michalek said:
I reflashed Button ROM for three times, I still have IPL 1.01 and SPL 2.26.
I can't unlock my device, because I haven't OS...
Hm, in point 7 - Connect your device and cancel the partnership. (You're a guest )
I can not connect my device, because I haven't OS on Wizard, he boots only to bootloader (with IPL 1.01 and SPL 2.26). I can flash from PC, but then I never have OS od MDA.
I read the "A Definitive Guide to Unlocking G3 Wizards" many times, but I dont's see any solution...
Maybe I have strange wizard
Click to expand...
Click to collapse
When I say "Connect your device" I mean to connect it to the USB cable. Two paragraphs after item 17 I address this issue. You don't need an OS, just be in the bootloader screen. I've personally had this exact same thing happen where all I had was the IPL and SPL with nothing else. Remove battery from PDA and then put it back in. Make sure you reboot your PC.
Good luck.
When all else fails, flash an official Rom from your Service Provider.
Click to expand...
Click to collapse
good idea, but it doesn't work; because "upgrade only" - My originally T-Mobile ROM is only 2.21, so I can't flash it
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM This will give you a strong 2.26 IPL and SPL to work with.
Click to expand...
Click to collapse
Invalid Vender ID.
But I can flash MOLSKI ROM with 2.26 IPL/SPL. Should I?
==
For everyone: Thanks for your time, really. But I'm confused, I read all, nothing helped.
Let's say: "Michalek is very stupid, we'll write him "what to do" step by step" ) something like "You asshol, connect your mda in bootloader to pc via usb, then download this, run it, then ...".
Because manual doesn't work for me, probably.
New year, new way I tried to flash today - and - i see OS, I'm in OS, I'm going to unlock wizard based on Unlocking Tutorial ;-)
I don't know, why it was successful. I tried reboot yesterday for four times, but it not helped. Only today.
I'm the happiest man on the planet And, "I've seen PROBABLY every situation with a G3 device here." - it is TRUE
Thank you for your time.
Michalek said:
New year, new way I tried to flash today - and - i see OS, I'm in OS, I'm going to unlock wizard based on Unlocking Tutorial ;-)
I don't know, why it was successful. I tried reboot yesterday for four times, but it not helped. Only today.
I'm the happiest man on the planet And, "I've seen PROBABLY every situation with a G3 device here." - it is TRUE
Thank you for your time.
Click to expand...
Click to collapse
Good to hear you are making progress, let us know how things turn out!
--M
-Michalek- Well that's wha we like to hear! The 1.05 works great as a disaster recovery tool. Most times when it doesn't work I tend to lean on the PC as the culprit. CHKDSK, temp files, spyware and virus's, etc.
Happy New Year, no?
Don't feel stupid
I'm glad it's working for you! Don't feel stupid though. My first attempt at loading a new rom went very similar. The CID unlock process told me it was successful (I thought) but it wasn't. I freaked out and thought all was lost. But I finally worked through it by going back to the Button ROM (LOVE THAT BEER SPLASH SCREEN) and starting over. The same problem even happened again about three weeks ago. After freaking out, I reloaded the Button ROM and was back on my way to normalcy
MDA is running on Superrom 1.1 and it works!
I don't know, what exactly was the problem with OS, but it helped me, when I left MDA cca three hours without battery. When I flashed the ROM before, OS wasn't.
At the last time, THANK ALL OF YOU VERY MUCH. And special thanks for Dr Puttingham and his unlocking tutorial. Thanks.
Greetings.
I have spent the past couple days searching for a solution to unlock an MDA. I have got all of the different versions of lokiwiz, wizardunlock, lokiwizMsl, etc. and the mda refuses to be unlocked. I believe I am following the directions step for step, but even the forums where people have the same problems as I (internal read/write error, can't find specified path, etc.), none of the solutions are working for this device. From my searching I believe it is a g3 MDA. The stats for the device are as follows:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
I have tried downgrading the firmware to no avail (the ftp site doesnt have the file), and the phone doesn't want to be DOWNgraded anyway. If ANYONE out there is cyberspace can assist, my gratitude will be pouring forth from their screen!
[email protected]
So have you followed this thread? It has valid links to get the Button ROM so you can do the downgrade and points you to the threads that will help you do this unlock:
http://forum.xda-developers.com/showthread.php?t=298613
In a nutshell, downgrade to the button rom (just execute the file and follow the directions). Your IPL will be 1.xx at this point and then you can use lokiwiz .2b to do the CID unlock. all of this is outlined in the excellent guide by Dr. P (which the above link will take you to). Then get your SPL down to 1.xx, then upgrade back up to 2.xx. Then you can start flashing custom roms.
If you still have issues, let us know exactly what you are doing and exactly what errors you see (or what your phone does or doesn't do).
Greetings mfrazzz.
I have indeed downloaded and attempted the button ROM. The installer started and then after about two minutes told me that the phone wouldn't let me Downgrade the ROM. I am currently downloading (70% done) the button ROM again and will see if it has the same problem. If so, I will of course seek the help of the experts here. Thanks for the quick reply!
gtw said:
I have indeed downloaded and attempted the button ROM. The installer started and then after about two minutes told me that the phone wouldn't let me Downgrade the ROM.
Click to expand...
Click to collapse
Let us know the exact error you get (I assume the error is on the PC side) and then what the behavior of the phone is after you do this. Also, at what point does this error happen (has it actually started loading the rom or is it before it gets to that point and where its just checking your phone?)
Another option would be to try putting on the Wizard Love rom and then downgrading to button. Shot in the dark but worth a try.
Also remove your SD card when you try to downgrade. Try from a different PC if you can, or reboot your current pc before attempting this again.
Good luck!
Greetings again.
After downloading and executing the button ROM updater, it went to the status bar screen and stayed there for about a minute before displaying the following error message:
Error [296] : UPGRADE ONLY
This is (I believe) the same error I got previously. I was using RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship (which is the file that I downloaded from http://forum.xda-developers.com/showthread.php?t=298613 under the link button ROM (step g3.3).
ALSO... the phone is stuck in the multicolored ROM screen. (the red green and blue) On the screen (from top to bottom
IPL 2.26 RUU
SPL 2.26
USB
gtw said:
This is (I believe) the same error I got previously. I was using RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship (which is the file that I downloaded from http://forum.xda-developers.com/showthread.php?t=298613 under the link button ROM (step g3.3).
Click to expand...
Click to collapse
Nope, thats the Cingular 2.25 ROM. Thats why you are getting the error (since you aren't CID Unlocked it won't let you load that).
The ROM you are supposed to be loading is this one:
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
Thats the Button ROM (and the one I show being in that link on that page). Please download that, and run it. You should make more progress
Since you are on the bootloader screen (Rainbow screen you described) just run the button rom when you get it downloaded (active sync will not connect, but since you see USB above the left soft key you have the connection to do this).
I see....it would make a difference if I got the right program! Rapidshare says I have ten minutes before I can download another file, so after I download http://rapidshare.com/files/18212239...WWE.exe.h tml, I will try it and post the results here! Thank you so much for your help, mfrazzz!
Greetings.
After downloading and installing (onto the phone) http://rapidshare.com/files/18212239...WWE.exe.h tml, the stats for the phone are
ROM: 2.26.10.2 WWE
Radio Version: 02.25.11
Protocol: 4.1.13.12
ExtRom: 2.26.10.105
After executing lokiwiz, lokiwizMSL, wizardunlock, and a few different versions of each (after I put the enableRapi onto the phone), the phone still won't unlock. It either gives me a "Cannot find the specified path" error, or the "Internal read/write error".
Im not sure that the file I downloaded was a 'down'grade, so if anyone sees a solution, please post!
Thank you
Did the flash of the Button ROM work? Your IPL should have changed to 1.xx after doing that flash (and your splash screen would be a photo with a mug of beer in the foreground). Since your IPL and SPL still show 2.26, it appears the flashing of the button rom didn't happen.
Not sure what else to tell you. It should be as simple as running the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe file, and letting it flash to your phone to do the initial downgrade. But you have to be a 1.xx for IPL before the lokiwiz .2b will be able to work (so there is no point in doing anything else until the steps before that complete. Again, follow to the letter (including checking the results) the thread by Dr. P on CID Unlocking. You should never try to do steps before the previous step is complete).
mfrazzz said:
It should be as simple as running the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe file, and letting it flash to your phone to do the initial downgrade.
Click to expand...
Click to collapse
I thought it would be that easy too. I clicked on the file, it went through the flash, and those are the stats that showed up. I am currently trying the flash again. One difference I noticed this time is that the version it says is going to be installed is 1.xx this time, last time it said 2.XX. It looks like its going ok, though. Ill post again once it is done.
Greetings.
THANKS FOR YOUR HELP MFRAZZZ! Not only did your prompt responses brighten my otherwise gloomy, MDA filled day! Your patience with my noobitude on this device (its not mine) has been a blessing beyond anything I could have hoped for. The device is now UNLOCKED!!! After the last flash, the beer mug showed up and all was well. Lokiwiz worked like a charm and your help, as I said, was much needed! THANK YOU!
gtw said:
Greetings.
THANKS FOR YOUR HELP MFRAZZZ! Not only did your prompt responses brighten my otherwise gloomy, MDA filled day! Your patience with my noobitude on this device (its not mine) has been a blessing beyond anything I could have hoped for. The device is now UNLOCKED!!! After the last flash, the beer mug showed up and all was well. Lokiwiz worked like a charm and your help, as I said, was much needed! THANK YOU!
Click to expand...
Click to collapse
Very cool. Just make sure you get the SPL down to 1.xx before you move back up to a 2.xx Official rom and you will be golden.
Congrats, and glad I could help
mfrazzz you are amazing
Hello all,
I am somewhat of a newby here, but I have successfully unlocked my Cingular 8125 and installed a couple of WM6 ROMs. I followed the procedure of downgrading to Button 1.05 ROM, then running Lociwiz, then installing T-Mobile 2.26, then WM6 ROM. Worked great...until now.
I was going to try another ROM, and I followed above procedures (didn't know if I needed to after initial unlocking, but I did anyway). At the "install T-Mobile 2.26" step, after 1 %, I got an error 326?, nb file not for this device. I can still install cooked WM6 ROMs, and the SPL changes, but IPL always remains at 1.01. If I try to install IPL/SPL 3.08 CAB, SPL changes to 3.08, IPL stays at 1.01. I have re-installed Button Rom 1.05 and run Lociwiz a dozen times to no effect. Even the Cingular WM5 OS meant for this device gives me the same error code as the T-Mobile.
I'm hoping this is a simple newby error. Anybody have any suggestions.
Thanks for any help.
By the way, after loading Button ROM, my Wizard hangs during the customization routine at Signed_DiscoButton8.sa. I must soft reset.
I got exactly the same problem.
I am now on IPL 1.01 , SPL 3.08, radio 2.69, using rom NBD 8.3
doesnt seem a problem however...
d-lite said:
I got exactly the same problem.
I am now on IPL 1.01 , SPL 3.08, radio 2.69, using rom NBD 8.3
doesnt seem a problem however...
Click to expand...
Click to collapse
Hey m8,
have you forgotten this thread (http://forum.xda-developers.com/showthread.php?t=319582) ? (see last post)
mestrini said:
hahaha nice to see good spirit after all this
Here goes:
Make backup of the CID block (VERY VERY important!!!)
Make backup of the GSM calibration block (VERY VERY important!!!)
Kill wcescomm.exe process
Start mtty, enter bootloader mode in Wizard and connect
type doctest (this will write test patterns in DOC chip and clear all data!)
Flash button ROM (1.01_IPL/1.01_SPL/1.05_OS)
Flash CID block backup (don't miss this)
Flash GSM calibration backup (important)
If all ok then remember to upgrade to 2.xx before installing WM6!!
Post results
EDIT:
Use WST for steps 1, 7 & 8
Click to expand...
Click to collapse
are you willing to prove me wrong?
mestrini said:
are you willing to prove me wrong?
Click to expand...
Click to collapse
yes.. missed your last post to be honest, sorry..
(btw phone is happy till now .. but we go for solving it, killing seems impossible)
step 2, gsm callibration block.. how do i copy?
D-Lite
use the "Read ROM" button and select the appropriate section from the list.
status:
Code:
DOC ImgFS partition read/write test PASS
Ext ROM partition read/write test, offset=0x0, length=0xA00000
Test pattern =0xAA
Flash Ext ROM failed.
DOC Ext ROM partition read/write test FAILED
--Flashing button rom @ 100%
--DATA CRASHES PLEASE CONTACT SERVICE CENTRE
--WST Says I am still on SPL 3.08 and rom is write protected.. screen of wizard says SPL 1.01 ...
--Installing Button ROM, ... SIM Lock SUDDENLY
--Screen goes funny flashing between simlock and customise
--Few soft-resets, WST now convinced on SPL 1.01 and flashed CID block
--Soft-reset
--Imei gone, flashed back GSM callib. data, softreset
--doesnt boot passed the pint of beer... going for RUU of T-Mobile 2.x
--bootloader, flashing RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe
--The NBF can not be used for your phone @95%, followed by congratiolations (stupid software)
--trying UK version...
--all give error 326
--another button flash
--*PLING IDEA* on 3.08 i couldnt doctest properly... so doing it again
-- bad idea.. same result...
damn... i thought it would work
anyway, there was point where the phone had same values for IPL/SPL (not too bad ). What is strange is why phone didn't boot anymore after flashing the GSM calibration and saying the flashes weren't suited for the phone.
What state is it on now? Wanna go again? This time, instead of flashing the 'GSM calibration data' do a simple IMEI writing and try to unlock CID before upgrading to official ROMs
sorry for this...
IPL locked on 2.26
I am having the same issue. I have tried numberous times to load my original rom and get the 326 error @ 1%. My ipl remains locked on 2.26. Is there any way to fix this? Please help.
it is now on 1.01, got my own imei back, spl 3.08, nbd 8.x rom...
everything fine again.. pretty sure it has something to do with ext.rom and/or write protection of it.. will give it another shot but not this month.. getting busy
@acmickey, not sure if you got same issue... is your IPL 1.01? else you might just have a locked phone..
Hey d-lite,
I followed your example and loaded BSD8.3 ROM and IPL/SPL 3.08 and radio 2.69. Everything seems to be fine. No missed calls. All programs work (touchflo is pretty cool). IPL is still locked on 1.01, even though SPL is 3.08.
I tend to agree with you that something is suspicious concerning the extended ROM. The first symptom I had that something was wrong was after loading Button's ROM, during the customization routine, Signed_DiscoButton8 would not install. Phone locked up and had to soft reset.
Oh, well, at least the phone works. The downside, of course, is that you can't load an original ROM, even though you can load a cooked one. Weird, huh?
Hopefully someone a lot more knowledgeable than I will figure this one out soon. Will keep checking the boards. At least we don't have bricks.
I am having the exact same problem as the 1st post but my ipl is stuck on 2.26. I am using an unlocked device and I have no problem downgrading/upgrading the spl. I also get the 326 error when I try to flash back to the original rom. (I used to be able to do this without a problem - I can't figure out what happened.)
It's really weird and I have search and searched and can't seem to figure out a solution.
which SPL you have now?
sorry.... my spl is 1.01
Right. Assuming your device is working 'normally' are you willing to try something new? If so contact me PM
what have you cooked up this time mestrini? lol
my wiz (at 1.01 still..) is doing a-ok, but always willing to go for something new so we can fix this for the communities sake...
d-lite said:
what have you cooked up this time mestrini? lol
my wiz (at 1.01 still..) is doing a-ok, but always willing to go for something new so we can fix this for the communities sake...
Click to expand...
Click to collapse
sorry to mislead you buddy but acmickey got it all wrong and, instead of IPL stuck at 2.26 and SPL 1.01, he has same as you IPL 'locked' at 1.01
So my theory could not be verified.
cheers