Can you flash the Sprint 6700 rom to the Verizon 6700? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Does anyone know if doing this will make the phone a brick? I am daring to do it, but hesitant because I cannot find a launch rom from Verizon to go back to.
Mike

I would not recommend doing this, there are some major differences in how they work there networks, and you will probably brickafy your phone. It's best not to try.

but what if you use the unbranding trick (hard reset after you flash, soft reset before carrier customization begins)?
anyone treied this? anyone WILLING to try this? i will supply the sprint rom if needed!

With all the ROM swapping we did on the 6700 it seems like it should be possible. As long as just the CE ROM is updated and not the Radio ROM you shouldnt run into any problems. The Extended ROM may need some select customizations (removals from the Verizon, additions from the Sprint) but that is cake once the CE ROM is updated. My guess is all that would be needed is an MaUt_NoID ROM updater for the 6700 like we had for the 6600. I don't have a 6700 as of yet so I can't help you but I'm upgrading from my 6600 soon and am definitely interested in getting this new ROM working for other carriers

I'm pretty new to the whole PDA world, so I am still gathering some basic info. I have a Sprint PPC 6700 I would like to convert to the Verizon network, and it is already a brick. When turned on it shows 'Serial' at the top of the screen until it is plugged into the USB, and then it says 'USB'. At the bottom it reads 'v1.00'. I assume this is the bootloader screen, but what I need to know is how do I get a rom to install. I would settle for getting this thing back to factory.

put it in the cradle with power and run the Rom Upgrade Utility

That won't work because in its current state, Active Sync does not see it. Windows sees it and recongizes it as a CE device, but that's it.

try using WinRAR to open up the installer and run the EXEs it contains one by one (I think the one you'll need is MaUpgradeUt.exe or something like that

I'll give that a try this evening. Thanks.

I tried that, and it tells me that the ROM image is corrupted, and I need to download the proper image for my device. I have tried both updates with this with no luck.

Related

****** Experiment Gone BAD ******

Things were good for a while but now it all has gone to ****s.
My BA is having issues and not only with BT. I have managed to enable big store using exttools.exe and repart_doc.exe. The only issue is that I guess that has wiped the hidden rom where all the preinstall apps were.
To make a long story short, I had reinstalled the original rom, from a rom dump I did right when I got the device, however, the device, even after hard reset does not run the usual set up utilities that it did and install the junk my telco has included. While for the most part this was not a big deal now I realize that some of the fixes were needed.
For example I used to have BT xxx.3500 now I have xxx.3900 all find and dandy but with both versions my BT will not stay up for more than 2 minutes before it drops the connection.
On soft reset I get the following error message.
Cannot find "storage" ( or one of its components) Make sure the path and filename are correct and all the required libraries are available. Bugger
So now the question is - IS there a way of making these apps run and if so, how or is there another fix that can be done. MY BA is bleeding and it is dying and it is pissing me off.
After all the restores I can see the Extended_ROM on the PPC once again and all the apps in it, just can't run any of the darn things.
BTW, as my signature says this is BA from Telus and it is running on CDMA. which btw is missing from the WWE version on http://wiki.xda-developers.com/index.php?pagename=BA_Versions
Any insight would be appreciated.
If I understand everything correctly, you've effectively wiped the Extended ROM and are using it, along with your Storage as one big "persistent storage" folder on your BA, which is what those programs were designed to do. Everything you did, functioned as it was supposed to.
If this is not what you want, then you might try reflashing your device with the last ROM you got from your carrier and see if that restores everything.
I did just that, and I did flash the device with the "virgin" rom which I have uploaded to wiki. But somwhere along the line something just does not jive. While preforming a hard reset the device would normally auto config itself with all the junk that the telco has put on the device including a number of patches and what not. That function does not run anymore, which is what causing me grief. If I unhide the ROM I can see the files that are supposed to run, including the autoexec.exe all there. I try to unlock to copy these files and run them manually but I am not allowed to copy them anywhere. and while I try to use EXTTOOLS.exe to unlock the ROM thing just go south. It says that the ROM is unlocked but I am still not able to copy any of the files from the ROM.
szamot,
there is nothing availble yet for our phones to update them or make them any better...
I can't believe you tried messing with your harrier... just wait a while until sprint releases their update to the ppc6600. (fingers crossed) we should be able to do something then...
all of the roms you see here (so far as far as I know) are for gsm units, and their roms will NOT work with our cdma's. WAIT!!!!!
Hopefully you can get things back to normal.. otherwise your gonna have an expensive pile of nothingness to work with.
good luck.
as i side note wiki has 4 cdma roms.
Actually I uploaded the rom because it seemed to be the newest one at the time.2.04.00 WWE, I also upgraded the BT to xxx.3900 which all worked fine. However somwhere along the line the Ext Rom got screwed, even though I can see it I can't get at it. Not all is lost however I just procured the contents of the rom from a new device, and even though I run all the fixes and updates and patches the PPC still runs like crap. Even hard reset does not get the unit back to its original state.

8125 ROM Upgrade Problems

I recently attempted to update the ROM in my Cingular 8125. The process stopped at 95% and I received an "Internal Error". Now, when I turn on the phone, it gets as far as the color RUU screen, and nothing else.
How can I find out if I can repair this situation myself or if I need to take it back to Cingular.
Hopefully you'll give Cingular a little more info regarding this than you gave us.
My psychic advisor is STILL on vacation so I can be of very little help to you, sorry!
What ROM were you running before and what ROM were you trying to flash it with? Did you CID unlock before you flashed?
Sorry - When I posted the 1st message, I was in a hurry...
I am not sure what ROM version was on the device before I attempted to update (I know, I should have paid attention, but I was not). The phone was new from Cingular and I had not done anything else to it besides load a couple of apps (Skype & Agile).
I attempted to run the file RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe that I downloaded from the HTC site. The update go to 95% and I received the error "ERROR [326]: INVALID COMMAND" - This NBF file cannot be used for your PDA Phone. Please check your NBF file." (I have attached a screenshot of the error to this post).
I am not sure what to do at this point.
Thanks,
Chris
Some folks at the Cingular forum are having the same issue with no solution offered.
I'd suggest putting the device into bootloader mode (Holding Record and Camera buttons while soft reseting) and then reflashing. Make sure not to launch any programs while flashing. I also don't touch the device at all as I've noticed the USB connection might slightly disconnect.
Good luck and let us know what happens.
I just tried reloading from the bootloader screen - no luck. Exact same error at 95%. Would it work to try to reload an original earlier ROM? If so, how would I go about trying that?
Chris
I had this same problem.....I went to the cingular site after having the problem. Before installing I stopped all applications then soft reset.
THen after it boots up install the file from cingular. It worked from their site. Not sure what changed but I am not having any problems now with the new ROM.
I had this same problem.....I went to the cingular site after having the problem. Before installing I stopped all applications then soft reset.
THen after it boots up install the file from cingular. It worked from their site. Not sure what changed but I am not having any problems now with the new ROM.
I have re-downloaded the ROM file from the Cingular site (actually it just redirects to the HTC site). Same problem. I cannot get to the point to even shut down any programs because the phone OS does not even load at this point. When I do a soft reset, I get the following (sorry for the blurry image - as you can see my good phone with the good camera is dead...)
I had a similar problem. I posted the fix on another thread and ppl said i was wrong, this wasnt it...but heres what worked for me.
Are you using a usb port on the front of the computer? if so, try pluggin into the ports on the back of your computer. I tried flashing the official rom from cingular a few times using front port and it stopped at the exact same % each time. got the same thing as you, colored bars.
Someone had mentioned to me that front usb ports don't work as well as back ones. give it a try. good luck
from the picture, it looks you have the G4 chip(u can see 2.25 0001)
Thanks to everyone for their input. From the suggestions above, I have tried various USB ports on my laptop and I always get to the same point. I have also called HTC tech support and they are pretty sure I have bricked my phone. I talked to Cingular and they have agreed to replace it. I have also researched the G4 chip issues (looked at the post: http://forum.xda-developers.com/viewtopic.php?t=56408).
Now I have the following question - When I get my new phone (which I will assume will have the G4 chip as well), the Cingular rep told me that it will already have the latest 2.25.0001 ROM on it. What are my options at that point to SIM unlock my phone. Will I be able to? From the post I referenced above, it sounds like I may not be able to with the G4 chip.
Chris
xtreme23 said:
from the picture, it looks you have the G4 chip(u can see 2.25 0001)
Click to expand...
Click to collapse
I second this observation! :shock:
This makes a major difference on wether or not you can even upgrade.
Search for G4 issues.
The .0001 in the IPS/SPL number will tell you which one you have.
The way I understand it is:
2.25 - G3
2.25.0001 - G4
I think this is the proper way to identify it.
slapper said:
Now I have the following question - When I get my new phone (which I will assume will have the G4 chip as well), the Cingular rep told me that it will already have the latest 2.25.0001 ROM on it. What are my options at that point to SIM unlock my phone. Will I be able to? From the post I referenced above, it sounds like I may not be able to with the G4 chip.
Chris
Click to expand...
Click to collapse
Chris, LokiwizMSL ( http://forum.xda-developers.com/viewtopic.php?t=50768 ) can SIM Unlock your device. Be sure to read the instructions.
Well - Now I have a new problem. So far, Cingular is refusing to replace my phone - saying that the ROM upgrade voided the warantee. I am still fighting that, but just in case I loose, is there any way to get my phone fixed once it has been "bricked"?
slapper said:
Well - Now I have a new problem. So far, Cingular is refusing to replace my phone - saying that the ROM upgrade voided the warantee. I am still fighting that, but just in case I loose, is there any way to get my phone fixed once it has been "bricked"?
Click to expand...
Click to collapse
If you installed an unofficial ROM then they are correct. You should never admit that you used a ROM that was not provided by HTC.
There are warnings all over this site about VOIDing your warranty.
Since you used the Official Update they are wrong.
Same problem with official Cingular 8125 ROM
I tried to flash the official Cingular ROM from the HTC site here:
http://www.htcamerica.net/docs/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe
I got the same error at 95%:
"Error [326]: INVALID COMMAND This NBF file cannot be used for your PDA Phone. Please check your NBF file."
When I reset the phone I get the RGB bootloader screen and nothing else.
My phone is a G4 and was running ROM version 2.25.11.1 WWE before. The reason I tried to apply this ROM is because there was apparently no Extended ROM. None of the customization cabs executed on a hard reset. Also, in Device Information, there was no "ExtROM" listed.
This is the second phone that this has happened on. I thought the first time was just a fluke thing and I had a bad phone. But now I think there is an issue with this ROM.
Anyone have any idea what is going on here with this ROM? Does the fact that there was no Extended ROM have anything to do with this ROM not flashing properly?
Is there anything else to try or do I need to try to return the phone (AGAIN)?
how to fix the problem
read this thread carefully. The upgrade problem seems to be occuring on G4 chipped Wizards with the most current IPL/SPL.
http://forum.xda-developers.com/viewtopic.php?t=56088
take the official update. run it, when it finishes extracting look for the extracted NBF file in your
C:\Documents and Settings\yourusernamehere\Local Settings\Temp\the newest directory just made
find the NK.NBF file
extract it using the tutorial in the post above you will be flashing with the official cingular components sans IPL/SPL.
flash it and your are back up and running
I would have posted this earlier but i had to make sure it worked and was repeatable.
I think the problem with the new update is the new IPL/SPL version checking. It seems that if the patcher sees the same version already running it will give you that error at 95%. I've seen it on 3 phones already and I have been able to fix them by doing what i've told you above. You are already in bootloader mode and your phone is ready to accept a new rom anyways. My solution may not be the best for your phone and take no responsibilites but you are already desperate and need a fix. Good Luck!
Thanks for the reply, evilito. Since I hadn't gotten any replies for a few days, I decided to go ahead and try to exchange the phone at the Cingular store. They were baffled that this was the second phone I had returned for the exact same problem, but gave me a new phone anyway. I wish now that I had waited so that I could try evilito's solution to see if it works. As it is now, I am too scared to try any flashing on this new phone after my results with the first two. I would really hate to have to try to return a third phone
Can anyone else verify that there is a problem with the latest Cingular ROM when flashing a G4? Or did I really have two bad phones?
slapper said:
Now I have the following question - When I get my new phone (which I will assume will have the G4 chip as well), the Cingular rep told me that it will already have the latest 2.25.0001 ROM on it. What are my options at that point to SIM unlock my phone. Will I be able to? From the post I referenced above, it sounds like I may not be able to with the G4 chip.
Chris
Click to expand...
Click to collapse
Thats good to know, I thought that when we unlocked it and updated the ROM we lost Warentee Support. Where can you get the official Cingular 2.25 ROM. I am still on 2.17.

Bootloader question/trouble

Hey there everyone, I am pretty new to this forum so I must apologize for throwing you all into the deep end. I recently purchased an o2 XDA mini S second hand from a guy on boards.ie here in Ireland. I got the phone and really liked it because it allowed me to get rid of my Dell Axim X3i and mp3 player and keep it all in one device.
After a little bit of more research I discovered that I could remove some of the bloatware from the o2 xda mini S by just hard resetting and choosing the basic option which I than did. Still not satisfied with the overall performance of the XDA I decided to try a rom upgrade. Not wanting to do a totall overhaul I decided to just do a radio upgrade first.
My device is sim unlocked, it was like that when I bought it. I used the latest wizard service tool to CID unlock the device before I even flashed the phone. I also used the wizard service tool to change the nk.nbf file within the o2 mini S radio update into 96000000-GSM.nb. I then used this file to write to the GSM radio code (Bdk 1) according to the wizard service tool in the hopes that it would upgrade my radio version.
Well when I restarted, nothing of the sort happened, on the boot screen I noticed I was now missing my GSM version and when the phone finally got into windows mobile, it did not pick up any signal even though beforehand it could. The phone also became super slow to the point where it was unusable.
I have gone into bootloader mode subsequently after reading on this forum and tried to reflash with a number of updates with active sync disabled and nothing else running with the phone connected via usb to the pc. None of the updates would even pick up the phone or allow me to flash it.
My phone is pretty much screwed, I have a spare so it is not that big of an issue but I would like to make this usable again if at all possible. So my question is how do I flash a rom while the phone is in bootloader mode?
P.S I forgot to include the Current boot screen details:
IPL - 1.05
SPL - 1.05
OS - 1.5.4.2
Hi,
You can use the Wizard Love Rom from here http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
Hey there, thanks for the advice, I did download that ROM but like I said before, none of the roms manage to flash my XDA because they all cannot seem to connect to it. Activesync does not even pick it up in windows mode, and even when I have it connected in bootloader mode via usb and I double click on the love rom, it goes through the motions but never managed to "verify the information with the pda"
Try a stock Tmobile ROM but not from bootloader. Also, I would check the activesync app on the device. Make sure it's set to use USB as the default connection method.
A few other steps to try...
Uninstall ActiveSync and install an older version. If still no go, try a newer version.
Try a different USB cable and/or USB port.
Try a different computer with XP, not Vista.
Try flashing it without the SIM card or any memory cards.
If all else fails, you can try the SD card flashing method. There are instructions in the Wiki on how to do it, but always a stock ROM.
Try this one... http://forum.xda-developers.com/showthread.php?t=311027
Updated IPL/SPL and radio 2.69
Hey Devis, I think I have come one step closer, I tried all the suggestions that you made. Except well now my phone will not even go into the operating system when I switch it on. It will boot and the version numbers show but then it just resets itself.
I tried a different usb cable and I am not using vista, tried a different pc and the same result. The one place I did have some marginal success was the sd card method.
Basically what happened is that It backed up the OS from my phone and then reloaded it, not exactly what I wanted since the OS and rom are both screwed on the phone so my question at this point is, is there anyway using the SD card method to load one of the stock roms onto my phone?
I searched around the net and found the opposite to the "r2sd all" function, would be the "s2d" function, would that allow me to flash the phone with a stock rom?
Thanks for your time, I am going to call it a night here in ireland and head to bed.
Ok, if the phone resets then you probbably have a dead/dying battery. Charge it for about an hour or so using the wall charger, not the USB cable. Try to restart it and see if you can get in the OS. I was looking in the SD card method thread and some guy was successful at restoring the image from the SD even though his OS had died. He then had a fully functional phone.
The other thing to do would be to get the image file from someone that has a living and breathing wizard, preferably one with a stock ROM. Since this method is the equivalent of making an image of a PC using Ghost, the restoration of such an image to your Wizard should work just fine.
Just make sure that the other Wizard is SIM and CID unlocked. Or just go buy a Wizard from the store, unlock SIM and CID, copy the image on the SD and flash your device. Or... since u've got a new Wizard in your hands, just take the freaking thing appart and swap the guts return the store bought wizard to the store saying that the thing just doesnt freaking work!
As for the AT commands... it is possible that s2d would workfor you, it doesn't work in my wizard. from what i have been reading it appears that the bootloader is password protected and that password is randomly generated. I haven't played long enough with it to figure out how to get the password.
It looks like you've got some "trial and error" processes ahead of you. There is a wealth of info on bootloader AT commands on Wiki, nothing for the Wizard though. But something may work... not sure.
I could try to get you a ROM dump from my Wizard but I already am on SPL/IPL 3.08 and running WM6. the SPL/IPL version alone wouldn't allow you to restore from my backup.
Hey Devis, thanks for your time, just woke up here, will work some more on the phone today and let you know what is going on
Hey Devis, I did not even get a chance to fiddle around with the phone today, from being able to switch on less than 24 hours ago, it does not even want to switch on now so I am going to officially declared it a brick and move on. Will see if anyone can fix it for me, spent way too much time already when I should be working on my dissertation, thanks alot anyway
Sorry to hear that...
I have bricked one phone myself in the past... my old Pana GD87 and I absolutely loved that phone. I know how you feel.
Good luck with your dissertation.

Best rom for preformance?

I want to try out some different roms out there, I have a friend who uses the phone for pictures, sms, and email, and calls of course. So she really doesn't need all the bells and whistles, but Touch-Flo is always a nice addition.
The default T-Mo rom is so overkill, and the phone runs slow as hell. I'm looking to find a rom that gives the best preformance. I don't know if that would be the best option with the roms I've found my doing some backdating. I figured maybe someone out there has an idea how to get the best usage for the phone.
In this forum there are 2 great roms. One by PDAviet and one called Touch_It. I would get the file called RUU-Altas and then try both of these 2 cooked roms.
You might find one suites you better than the other. The reason for the RUU file is because if you have the T-Mobile Wimg (im assuming since you are posting in the Herald section) then you will need this in case you brick your phone. Before you do anything to your phone or anyone elses phone i highly recommend you read. Might save you alot more time then trying to do a plug and play with anything on this site.
Noone of the software here is licensed through HTC or Windows so its completely test at your own risk.
Good luck
Well, so far I have one sucessful rom change on my own wing. So thats one run through.
But when you say RUU (I'm not sure what that stands for) Atlas, I see one thats t-mo. From my understanding the RUU is a rom of the original image that you get when you start the wing straight out of the box.?
RUU stands for Rom Update Utility. It is used for update your device asa a new ROM version is issued.
You need an original ROM update package in order to recover your device in case it gets bricked.
Please note that the chance of bricking a device is not that rare. I flashed my device just yesterday with an original WWE ROM (instead of ITA) and an error occurred on the first try => Bricked device!!
So I had to "unbrick" my phone with the original ITA rom before giving the WWE update another try. It worked flawlessly on the second run.
Ciao

Scared to post but I am stuck must take your wrath

Aloha everyone,
I have tried to not post for about 3 weeks but I just can't move forward. I have read and tried to follow everything on the site but I am just confused. I know this is a developers site and I am very intimiated to be castigated by you guys but...it's the internet so what the hell.
I have found numberous instruction threads pertaining to updating ROMS on the Wizard. It seems that up until recently there was only one way to do things but now there are many. As I try to answer questions I come into conflict over which way I shoudl be heading.
I currently have a working WIZ100 that boots with IPL 2.21.0001 SPL 2.21.0lip with GSM 2.25.11 and OS 2.25.11.1. I somehow got to this point, I think by following the instructions to get hardSPL on my device and booting on startup. I did not know if I next needed to find a ROM and if so then how to get that ROM activated on my device or what programs to do this with. I know that the threads spell it out but the threads pertain only to direct assumptions; the assumption that my head is not in my ass.
I wanted to attempt to put a new rom on here, for fun and to play around with something new. Perhaps increase reliability or to get WM6 going. I am stuck now though. Part of me wants to turn back and load the original ROM from the HTC site and the other part of me wants to try a new ROM as I already have this thing booting to the 0lip SPL.
Is anyone out there willing to help me either via this thread, personal message or IM?
Since you have already installed Hard SPL you should be safe to go ahead and pick virtually any ROM you choose on there. I don't have a lot of experience with Hard SPL yet, except for installing it on my kaiser, but the one thing I would guess that you should make sure that the ROM you want to flash doesn't have would be an IPL/SPL update included. As far as I know, I don't think any of the public ones that you find on here have them but make sure you read the chef of the ROM's entire post to make sure. And, if you magically happen to find my ROM somewhere, which you shouldn't since I only gave it to 2 people to try, don't flash it because mine does include an IPL/SPL update.
From my best understanding you have already loaded HardSPL and now are CID unlocked. If this is the case then I would recommend going forward and flashing a new rom to your device. Just go to the Wizard Mobile 6 thread and find one you like, and flash it.
Simple as that.
I appreciate your replies.
1) I am clarified like butter! What program do I download and use to flash the ROM to the Wiz, this has been a source of confusion for me.
2) If I download and install the HTC Cingular ROM from HTC, will that overwrite the HardSPL and return my phone to Factory Default, including the radio areas? In other words do I rid myself of 2.21.0lip?
Thanks for not beating my head in...very polite you devs are...
I like beating people's heads in, and you are far too polite, that I am actually having a very slight guilty twinge! Damn you. I have a G3 myself so I cannot help much, however, I found this sticky which may help.
http://forum.xda-developers.com/showthread.php?t=332320
I do know that once you choose your rom, you open the folder and run the item marked as ruu.
Now if you only had a G3, then I could fry you like the noob you are.
I suppose at some point, I should make a point of reading/learning about G4's. I know they are a far different animal from my G3.
That's the reason I said not to flash a ROM that contained an IPL/SPL upgrade since there is the possibility that it may overwrite Hard SPL, although I'm not positive of that, but better safe than sorry especially if it it's not an official ROM that carries the correct IPL/SPL format for a G4. If it doesn't contain the correct format for a G4 it could ruin your phone. If you flash an official ROM though and it overwrites it you can always just reinstall Hard SPL again and keep flashing. I hope this makes sense.
As for the files you need to flash a new ROM, they're usually included with the ROM. If they're not then just let me know and I'll upload them for you.
Good that you asked before damaging your (expensive) device...
Every Flash version comes with a RUU (Rom Update Utility) you just run that proggy and it does the rest.
To make it easier, look for a rom that states it's G4 safe (no IPL/SPL included), so you don't have to mess around with the inner files. If you want to, begin your tests with the TNT series, the latest build, stated in my sig is G4 safe, after that you'll be able to know the initial procedure.
Good Luck.
Thanks for the info.
Do I execute the ruu from Windows XP or from the SD card ont he device?
Why am I have a hard time searching for and finding TNT 5.2.1921 TouchFlo ROM?
The rom update utlity gives me an error when I try to update. Should I try to do all this from the sd card?
Well, I am plugging along. I rebooted after an error 300 came up on the rom utility. Any suggestions for me?
I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?
If you have ROM on your desktop, Connect your phone to your computer via USB, open up Activesync, uncheck the check box in settings that allows USB connections. Make sure you have at least 50% battery, then put your phone into bootloader mode. (soft reset while holding down the camera button- keep holding the button for 5 sec.) a tri-color RGB screen should come up. This is boot loader mode. Then run the rom update utility program, and everything is automatic from there on. once it is done flashing the phone will restart itself.
Thresher said:
I found this thread, back in business, thanks for your help guys.
I guess my only unanswered question is...if I use the HTC ATT exe from htc.com will it kill the hardSPL and restore the computer back to normal?
Click to expand...
Click to collapse
Try it and find out. I'd kind of like to know the answer to that one too, although my phones a G3 and already CID unlocked anyway. You can always reinstall Hard SPL over again if it does.
So this worked out well for me overall. Installing HardSPL to my G4, and then using a correct bootloader with the right ROM (to review).
I am having one issue.
I have the OEM ROM, however the RUU gives me an error. Is there a documented way to restore the phone to an original status? Is it even necessary?
I ask due to problems since my upgrade to the TNT rom. I am noticing a lot of missed calls and people have complained. Is this an issue with the 8125 and the particular ROM?
I don't know what to ask, or how to search for this. Thanks for any input you can offer.
Otherwise the TNT rom is awesome. I do miss the voice dialing though. Thats another search.
Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.
xeno1 said:
Actually, that's usually an issue with your radio version. Try using either version 2.19 or farias 2.69 and see if that fixes your problem. You should be able to find both of them in the wiki and you may want to try both of them and see which one gives you the better reception because sometime one will work much better than the other for you depending on your location.
By the way, you don't have to be CID unlocked or have hardspl installed to update your radio so you shouldn't have an issue with the RUU giving you an error. If you do, let me know and I'll upload a different RUU for you to try.
Click to expand...
Click to collapse
So the Rom is broken up into major parts. Those parts must ineract with one another, so that would be why my radio version may be at cause?
Yep. The ROM can contain the IPL, SPL, OS, Splash Screens, GSM (the radio), and extended ROM, any of which can be changed or upgraded individually without affecting the other parts of the ROM (for all intents and purposes anyway). That means you can change your radio version without it deleting all of your settings or your installed apps in your OS, etc etc.
Since you still upgrade each individual part using a RUU that is able to update any of the parts you still get a warning when you run it that it will delete all of your files, but as long as the update that you're running doesn't include a new OS you can ignore those warnings.
I decided to back out of the entire upgrade and move back to WM5 Official Cingular HTC ROM. I am stoked that I now know the full process of taking a G4 through hardSPL, ROM updates and restoral.
I was too scared to try any radio updates or fixes. Maybe when I upgrade phones I will come back to playing with the 8125 but for now, I just need a good functioning phone for work.
Do these Cingular radio fix cabs apply to a standard phone or only to upgraded ones?

Categories

Resources