SX66 wont power on after attempted upgrade... - MDA III, XDA III, PDA2k, 9090 Software Upgrading

well, I have gone and done it...
I created the prettiest silver and black paper weight...
I was upgrading to WM5... when the power went out.... Only got as far as 45%
Now my unit wont power on...
any hope for me or am I dead in the water.
TIA
Frustrated..... but hopeful....

resolved
Ok..
chris at http://home.comcast.net/~sx66-blueangel
helped out and I was able to get it running again...
solution:
force bootloader mode by holding these keys...
(soft reset button + Power + voice record button)
Unit powered back up and I was able to rerun upgrde.
whew... what a relief..
Thanks
chris

Related

Software to put BA in bootloader Mode

My powerbutton is broken so I can't put my phone in bootloader mode anymore. I've got WM5 installed and activesync 4.1. Does anyone know if there is a possibility to put my phone in to bootloader mode without using the 3 button combination? Like with software or something?
BTW I must say that WM5 works just fine with me!
the power button broke on my xdaiis and I took the thing
apart and realigned switch..
all great since.. you need the swith to turn the screen bcak on
The thing is that the button had come off totaly. When I opened the phone it fell out. Somehow the button was damaged too, so it can't be pressed anymore.. The other alternative is to get let it fix, but that will cost me about 80 euro. And I don't need the button for anything else since I havesoftware to turn it off, and the phone also starts (if battery taken out) when you soft reset it. Whith the older versions of windows mobile it would go in to bootloader mode using just the installer, but since WM5 this doesn't work anymore.
dblfun said:
if there is a possibility to put my phone in to bootloader mode without using the 3 button combination?
Click to expand...
Click to collapse
The buttons are documented here
http://wiki.xda-developers.com/index.php?pagename=BlueangelGPIO
and here
http://wiki.xda-developers.com/index.php?pagename=BlueangelASIC3
You can try to write in the appropriate registers
and look if it helps.

HELP!! Power Button Problem

I bought my friend's Blue Angel with WM5 upgraded, and found that Power button is ok. I can turn on, soft reset or press to shut the light off, but cannot shut down Windows. I have to use software Spb Plus shut down button instead.
I thought if i down the rom to Win 2003SE, it should be fixed. But it's not. The Power button still has the same problem. I cannot shut down.
Please help, how can i fix this.
Thx.
What happens if you just press Power for short moment as you do with all other buttons and you wait a second?
When I pressed Power button for a moment, the light is off. But when I press and release, nothing happen.
Long press = turn off backlight, this is normal.
But after short press it should go asleep - maybe button is worn out slightly and youi just need to press is stronger?
and of course try hard reset before - if you can do it (it involves pressing reset!) means button is ok, and there is something else. Anyway if after HR still button doesn't work correctly, I have no idea what it can be.
jakubd said:
Long press = turn off backlight, this is normal.
But after short press it should go asleep - maybe button is worn out slightly and youi just need to press is stronger?
and of course try hard reset before - if you can do it (it involves pressing reset!) means button is ok, and there is something else. Anyway if after HR still button doesn't work correctly, I have no idea what it can be.
Click to expand...
Click to collapse
I did as you said.
Long press --> turn off backlight --> ok
Soft Reset --> ok
Hard Reset --> ok
Short press --> go asleep --> don't wok
Hard press -> for asleep --> don't work
or power button damage, but why other action with this button is ok except short press for asleep. --a
Sorry my English is not good
I have the exact same problem, no I dea what has caused it?
The XDA will not power down any more.
I will try reflashing to see if this will rectify it.
I must admit altough many people have put an enormous amount of work into adapting WM5 rom to suit the Blue Angel .I have all but given up with the WM5 roms short comings (WiFi , Bluetooth ,Instability ect)
So its goodbye XDA2S and hello Nokia N95
Anyone can help? Please.
I have exact the same problem. I CAN NOT shut the device down by pressing (short) the power button. I have to use Spb-plus which has a "Shut down" icon shown on the Today screen to do the trick.
Is there any fix to use the power button on the device to do what it is meant to do?
Thank alot!
Maby this can help
Hi.
I had the exact same problem and have searched an read. no solution until last night.
My phone hung after some fiddeling with tomtom, and i popped the battery. i switched it on, and for some reason i decided to turn off the backlight during boot. So power on- wait 1-2 sec - hold power button until backlight goes off. the screen flashed a couple of times and then after boot had finnished it worked again. HORRAY.
Before this i have tried soft/hard reset ++ but nothing worked. so im really happy...
Give it a try, and let me know.. i know a lot of people have this problem.
wow mate...i dunnno how...but it seems it worked for me...thanks...

I Think I Bricked It........

fixed it, please close
ShavedCivic187 said:
So I was texting on my Fuze and it froze. I hard reset it and now it won't start back up. Im using the latest Mercury Energy rom. It starts up, goes to where it plays the start-up sound and says "Energy Rom 3.0" and then stops. I have the touch response installed on it and it still vibrates when u touch it, so I dont think its too bad. Please Help! Thanx
Click to expand...
Click to collapse
Hold the Volume button down + the button in the middle + the reset button
keep holding until the screen goes to bootloader
CraZyLiLbOy said:
Hold the Volume button down + the button in the middle + the reset button
keep holding until the screen goes to bootloader
Click to expand...
Click to collapse
then reflash?
tryed holding the buttons and it didnt do anything.
He's advising that you hard reset. That's what I'd do, too, but if it continues to hang, flash a stock rom. You may need to go into bootloader manually if you do it over usb.
Fixed it please delete.
hard rest verizon phones
i think that verizon has ****ed the customers when i comes to hard resetting i think that they disable the option when you are try to do it with the whole volume button power button the reset thing i have gone through two phones because of this but now i found program that was leaked and it does it for me you go into that mode where you get that multiple colored screen and then once you plug you phone into your computer and then you run it and it hard resets the phone
that would be great if you can share how do you it with us, so any body have this problem can be fixed without asking too much.

Hard Reset Problem, really driving me crazy.

Hello everyone.
I am new to the whole custom rom and flashing thing, but after some reading and researching I decided to backup my stock rom and flash a custom one.
So I did successfully, to the point when the flash is done and I should do a so called Hard Reset. I've done the hard reset thing before and it worked, but now when I hold the both "silver" couloured buttons and the powerbutton at once the phone vibrates once and start booting.
I just don't know how to proceed with this since my X1 won't go in to Hard reset mode, I have no idea why or what I should do, so please, anyone just give me a hint and make my day.
Sorry if this is a totally useless thread for everyone else and it's just being annoying, but I really need some help here guys and girls.
Thanks in advance / Anton.
You probably just haven't gone through this procedure:
http://forum.xda-developers.com/showthread.php?t=431218
Hope that solves it
Good luck!
Actually I did, I followed BioVolt's videoguides on every step and when I checked afterwards on the tri color bootloader-screen it said: "KOVS110 SPL-0.72.01iNex" wich indicates that the Hard SPL procedure was successful.
Thanks for the hint tough, problem still not solved...
blondyz said:
Actually I did, I followed BioVolt's videoguides on every step and when I checked afterwards on the tri color bootloader-screen it said: "KOVS110 SPL-0.72.01iNex" wich indicates that the Hard SPL procedure was successful.
Thanks for the hint tough, problem still not solved...
Click to expand...
Click to collapse
I had the same problem - what you need to do is NOT hold the power button for long, just for like a second then it should work.
I too faced hardreset problem earlier, then later i found the following procedure holds corrects, atleast for my mobile. What i do is, press both silver buttons at a time and press power button only once and leave it(just press and leave only power button not the silver colored ones)..after few secs it will go to hard reset mode...
Try holding down the volume down button and the power button to go into the bootloader mode. From there, continue with your normal hard reset procedure which is holding down the 2 silver buttons and then press the reset button.
You only need to hold the two soft keys (silver buttons) to get into hard reset mode. if your phone is off, then you only need to tap the power button to turn on the phone, not hold it, but continue to hold the silver keys until you get the grey screen.
Hope that helps
blondyz said:
.....
So I did successfully, to the point when the flash is done and I should do a so called Hard Reset. I've done the hard reset thing before and it worked, but now when I hold the both "silver" couloured buttons and the powerbutton at once the phone vibrates once and start booting.
I just don't know how to proceed with this since my X1 won't go in to Hard reset mode, I have no idea why or what I should do, so please, anyone just give me a hint and make my day.
................
Click to expand...
Click to collapse
You need to completely shutdown your X1 first before hardreset. I mean COMPLETELY: remove your battery for at least 5s, then attach it and hard rest your device.
Thanks alot guys, actually the problem got solved by now, I treid a method I hadn't heard of before where you hold your two softkeys and under the battery cover give the "stylus hole" a push..
Worked just fine! Thanks alot to everyone bothering to help me, it's thanks to you guys I now have a working X1
Kinds regards / Anton.
the reason why its hard for people to hard reset from when its off is because they're holding the power button as well as the two silver keys!
you just hold the two silver keys and press the power key once, quickly.
keep holding the two silver keys until press R comes up!

[q] big problem

My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?
Lasarus said:
My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?
Click to expand...
Click to collapse
try this:
read all steps first
turn off phone
pull out battery wait ten seconds
put battery back in (leave cover off)
hold the power button + hold volume down
press the soft restart button* (while still holding the power button + volume down)
keep buttons held down till you see the white screen and green logo.
note* push the button with stylus it is hidden under where the stylus goes in next to the camera.
plug into the computer and run SUES it'll say already have latest version update anyways? click yes
i had to do this when i bricked my phone, (my computer crashed while i was doing the update) it really saved my day.

Categories

Resources