[q] big problem - XPERIA X1 Q&A, Help & Troubleshooting

My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?

Lasarus said:
My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?
Click to expand...
Click to collapse
try this:
read all steps first
turn off phone
pull out battery wait ten seconds
put battery back in (leave cover off)
hold the power button + hold volume down
press the soft restart button* (while still holding the power button + volume down)
keep buttons held down till you see the white screen and green logo.
note* push the button with stylus it is hidden under where the stylus goes in next to the camera.
plug into the computer and run SUES it'll say already have latest version update anyways? click yes
i had to do this when i bricked my phone, (my computer crashed while i was doing the update) it really saved my day.

Related

I Think I Bricked It........

fixed it, please close
ShavedCivic187 said:
So I was texting on my Fuze and it froze. I hard reset it and now it won't start back up. Im using the latest Mercury Energy rom. It starts up, goes to where it plays the start-up sound and says "Energy Rom 3.0" and then stops. I have the touch response installed on it and it still vibrates when u touch it, so I dont think its too bad. Please Help! Thanx
Click to expand...
Click to collapse
Hold the Volume button down + the button in the middle + the reset button
keep holding until the screen goes to bootloader
CraZyLiLbOy said:
Hold the Volume button down + the button in the middle + the reset button
keep holding until the screen goes to bootloader
Click to expand...
Click to collapse
then reflash?
tryed holding the buttons and it didnt do anything.
He's advising that you hard reset. That's what I'd do, too, but if it continues to hang, flash a stock rom. You may need to go into bootloader manually if you do it over usb.
Fixed it please delete.
hard rest verizon phones
i think that verizon has ****ed the customers when i comes to hard resetting i think that they disable the option when you are try to do it with the whole volume button power button the reset thing i have gone through two phones because of this but now i found program that was leaked and it does it for me you go into that mode where you get that multiple colored screen and then once you plug you phone into your computer and then you run it and it hard resets the phone
that would be great if you can share how do you it with us, so any body have this problem can be fixed without asking too much.

How do I hard reset locked phone?

Hi,
I just purchased screen locked phone (requires password to unlock). I thought hard reset will fix it but it does not do anything.
I hope volume UP and volume DOWN buttons simultaneosuly while phone if off then press Power button and release it while continuing holding VolUP and VolDown but nothing happens - phone stays on locked screen. Does this procedure works on locked phones?
Mmmm...
Make sure you're holding the buttons in firmly while you briefly press the power button. It doesn't matter that the device is password protected, all the data will be cleared and set to default ROM settings.
If the device just switches on, it means that one or both of the volume buttons weren't completely pressed when you hit the power button
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
artisticcheese said:
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
Click to expand...
Click to collapse
can u get it into bootloader mode?
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
artisticcheese said:
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
Click to expand...
Click to collapse
hold volume button down and press power button. if you can do this just flash a new rom from the sd card.
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
artisticcheese said:
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
Click to expand...
Click to collapse
its starts booting windows mobile? or tri color screen?
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
artisticcheese said:
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
Click to expand...
Click to collapse
well damn...... ill try to help u out, ill do some looking around and get back to u.
Hard reset
Be sure first that device (not the screen) is turned off, then:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
Thanks,
I figured this out. I was so stupud, I understood phone is off is like screen is Off. It actually meant the whole phone is off instead (had to remove battery for that).
The First thing you need to do: Power-OFF your device.
since it's locked, software interaction may not possible. you need to take the battery out, and put it back in 2-3 seconds later
Then, hold VOLUP and VOLDOWN tightly, and hit the power button to start the hard reset procedure.
htc inspire
hello friends I have the same problem do you fixt your phone? if yes please let me know how you did it please
Thanks I solved my problem..
Hard reset
I have samsung galaxy fit. and forgot the password nothing happen even reboot the phone. does any one help me

[Q] No Hard Reset

My HD7 is stuck on the start-up HTC screen. If left for a few mins. it goes to the screen showing Phone- USB cable -PC and thats it.
I tried hard reset: volume up/down held down + power on/off. No matter how long I hold these buttons down it does not go to the boot loader screen, infact it goes to the same screen as mentioned Phone-USB-PC.
When I hold down volume button + camera +power on/off the tri-colour screen appears for a few seconds but then does to the white screen saying "Enter USB Host Mode"
Zune comes up with error C101002E and trying to flash it with O2 rom the error 260, no comms
Can I do anything to restore this?
I've just found out it has no memory card! Would this stop it from booting past the start-up screen?
Yes I bought it as faulty, so I thought a reset would do it. Its not dead, far from it but I just need pointing in the right direction
Hold volume up + down at the same time and click power once while continuing to hold BOTH volume buttons...
If that doesn't work and u haven't hacked ur fone ibwould call for a replacement .... I'm sending mine back cuz mine is constantly freezing and rebooting by itself
Sent from my HTC Glacier using XDA App

Ativ S Blue Screen After Boot

I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
nexaddo said:
I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
Click to expand...
Click to collapse
http://support.microsoft.com/kb/2749480 = Steps how to hard reset a WP8 Device
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
nexaddo said:
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
Click to expand...
Click to collapse
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Jackson5 said:
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Click to expand...
Click to collapse
I've tried that...it didn't work. I've also went to Samsung and apparently it made it worse. Initially my problem had a blue screen after booting but after I took it back from service the blue screen has disappeared and now the phone just powers down after the boot. THe guys at Samsung told me that the don't have the device number in their database and that the cannot do anything to it....so i'm hopping that some tool will pop-up and I'll be able to flash the device from home.
Also being an Engineering unit when I power the device based on your description it doesn't show me an exclamation mark it just goes dark and if i hook it up to the pc it shows as mass USB storage, and I can access the files on it. So there is something i'm missing for this device in particular.
Thanks anyway for your support.
Thank you again Jackson5...Really...Thank you, i've almost lost hope...after seeing your post and replying to it I said ....what the heck...lets try that again, and it worked...not with your steps exactly...I put the phone into a charger and it started to power up...Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume and the exclamation mark appeared. and from there, suffice to say that I have a phone, again. So Thanks again
AW: Ativ S Blue Screen After Boot
I'm glad to hear that your phone is running again...
Sent from my GT-I8750 using Board Express
Same problem, help...
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
aginor said:
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
Click to expand...
Click to collapse
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
nexaddo said:
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
Click to expand...
Click to collapse
Cheers, I'm stuck in here and i can't get further.
My machine is an T899 Engineering version

[Q] How to switch off phone with broken screen?

Dear Xiaomi Mi3 users,
I'm sorry if this question has been asked before.
Basically my touch screen is totally cracked and unresponsive. I need to replace my screen. I ordered a screen and repair kit from China, and it has arrived. However the instructions say that I should switch off my phone before attempting to replace the screen. The problem is, the screened is cracked and I can't press any buttons. Holding the power button for a long time simply reboots my phone, it doesn't shut it down.
What should I do???
Thanks!!
Dc
dc984 said:
Dear Xiaomi Mi3 users,
I'm sorry if this question has been asked before.
Basically my touch screen is totally cracked and unresponsive. I need to replace my screen. I ordered a screen and repair kit from China, and it has arrived. However the instructions say that I should switch off my phone before attempting to replace the screen. The problem is, the screened is cracked and I can't press any buttons. Holding the power button for a long time simply reboots my phone, it doesn't shut it down.
What should I do???
Thanks!!
Dc
Click to expand...
Click to collapse
1) when your phone reboots at that time press the volume up button , the phone will enter into recovery mode and from there you can turn of your phone without even touching your screen
2) you can plug in a PC Mouse t your phone sing a OTG cable and can access all the functions without touching the screen
ZenR2 said:
1) when your phone reboots at that time press the volume up button , the phone will enter into recovery mode and from there you can turn of your phone without even touching your screen
2) you can plug in a PC Mouse t your phone sing a OTG cable and can access all the functions without touching the screen
Click to expand...
Click to collapse
Thank you so much. So simple yet I wasn't able to figure it out!!
dc984 said:
Dear Xiaomi Mi3 users,
I'm sorry if this question has been asked before.
Basically my touch screen is totally cracked and unresponsive. I need to replace my screen. I ordered a screen and repair kit from China, and it has arrived. However the instructions say that I should switch off my phone before attempting to replace the screen. The problem is, the screened is cracked and I can't press any buttons. Holding the power button for a long time simply reboots my phone, it doesn't shut it down.
What should I do???
Thanks!!
Dc
Click to expand...
Click to collapse
After restarting, when you see the MI LOGO, hold power & volume down button, it will execute the fastboot and just wait for a second your phone will automatically shuts off.
dc984 said:
Thank you so much. So simple yet I wasn't able to figure it out!!
Click to expand...
Click to collapse
Is it not "Volume Up" and "Power Button"? iso just "Volume Up" button.
I just had to do this too.
Hold power button for ten seconds to reboot.
Immediately switch to power + volume up to get to fastboot
But the fastboot screen does not automatically shut down. And holding down the power button for ten seconds reboots again. And because of my broken screen, i can't see the fastboot menu.
In the end I plugged it into a computer, installed adb, and did adb shell and adb reboot -p (-p for poweroff)
Now, back to replacing my screen, being very careful not to press the power button this time.
Hi,
Today I had the same problem. Xiaomi Redmi 4x with broken screnn and I could not shut it down to replace its display. After a few tries I found the solution.
Just press Power button and Volume Down and DON'T RELEASE THEM UNTIL THE SMARTPHONE IS COMPLETLEY SHUTDOWN. After about 8 seconds the smartphone will reset . Don't release the Power and Volume Down buttons , wait and the smartphone will boot again in another mode. Continue to keep both buttons pressed and after about 10-15 seconds it will really shutdown.
Good luck!

Categories

Resources