3 weeks ago I install the K-JAM new AKU2 rom in my QTEK 9100 of course using the CID unlocker.
Now I'm trying to install the new AKU2 Qtek rom and during the upload process it pops up a screen mentioning Recovery 260. I tryed to reboot both computer and 9100 but it seems impossible to upload this new to Rom to my device.
Could you guys help me out?
Thanks
Try the search function on this forum instead of posting. This has been answered a millionnnnnnnnnnnnnn times here.
Cizake - If that's the case, it would be nice if you could point us in the right direction - I've just searched to find the answer to this problem, and have had no luck. I would appreciate some help
Related
Hi everyone i am trying to upgrade my MDAIII UK, to a imate ROM or O2 Rom but i get county ID error, i tried a fix, but it then says that files are corrupt, i have tried everything that i could find on the site but no luck, could some1 please help me thank you
Hi,
Please read wiki and use the first method here -> http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Thank you m8, i will try it 2nite
Hi all,
i have a big problem flashing a new wm6 rom to my wizard. The wizard is CID unlocked following the How to flash a new ROM to your Wizard... a little tutorial! tutorial.
I had 2 WM6 roms on my wizard - 1 of them was WM6 crossbow, which i used a couple of months - both flashed w/o any problem and worked perfectly.
Last day i decided to flash the TNT touch flo rom but the install wizard ended with error on 99%, then i tried the TNT professional + home - same result, then i tried to flash the crossbow rom - same result. Then i returned to the unlocking howto - and followed it again but i can not flash wizard_love rom (ands at 98%) and Xda_MiniS_LaunchROM_v154102 (ends at 85%). I tried the whole procedure many many many times... but unfortunately the only rom i can flash w/o any problems is the t-mobile rom. Nothing else works...
Any help is highly appreciated!
Thanks!
succsess flashing new rom to my wizard
Hi All,
i tried to flash WRCX 2 (TouchFLO) after i flashed the t-mobile rom and i had success!!! I have it now running w/o any single problem .
As i posted above i tried the whole procedure with many other WM6 roms without luck ...
I am wondering what could be the problem here ...
My Qtek 9100 is dead after flashin new rom
After I flashed the newest rom version downloaded from official QTEK website
my 9100 has just 'died' without any signal.....
My previous rom was in spanish I tryed to put the new rom in english version something like 2....wwe and now it came a big trouble...
Somebody can help on this isue?!!
Thanks...
cimi said:
After I flashed the newest rom version downloaded from official QTEK website
my 9100 has just 'died' without any signal.....
My previous rom was in spanish I tryed to put the new rom in english version something like 2....wwe and now it came a big trouble...
Somebody can help on this isue?!!
Thanks...
Click to expand...
Click to collapse
Try to get the phone in Bootloaders (multicolor screen) and flash the Rom with 'RUU_Noid' utility,you can search for this in the forum or read this thread :-
http://forum.xda-developers.com/showthread.php?t=291215
Hi @ all,
**** happens, yesterday i tried to upgrade my rom on charmer (mda compact 2).
During installation system hangs on and didn´t finish.
So now i have only the startscreen and can reach the bootloader.
Tried now to flash an original rom, the ruu says error 294 invalid vendor id.
Otherwise the ruu (for no id) ended with error 238 file read.
My bootloder shows IPL 1.12, SPL 1.12 and USB connected.
I have read a lot of threads but cant find a answer for that.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
ronni
Hi Ronni,
same problem here. Do you found any solution?
Is it right, that your Device not charging and USB is not recognizing too?
Bg
Joy
Are you trying to flash WM6 ROM to your charmer? Because WM6 required IPL and SPL level at least 2.xx.
Did you tried this method to bring charmer back to life?
wow, thank you for your quick response. Hmm, I´m not shure, it´s a PDA from a Collegue, I don´t know, what he do with it. (I know only he try to flash something) Next week he take it to our office, then I try your solution
Thank you again
Joy
Bootloaderhang
Today i tried to update my rom... while the update i had an error.
i had updated the http://forum.xda-developers.com/showthread.php?t=363882
after the hardreset the phone hang by the first screen. I can press everething but nothing happens.
now I tried to flash a nother rom but it is unpossible because it can´t connect with windows mobile center on the pc.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
didi500
hi, I tryed to downgrade my qtek 9090 to wm2003se but I had no success.. i would do it because i have some problems with bluetooth. in this forum I found this article which explains how to fix bluetooth problems ( http://forum.xda-developers.com/showthread.php?t=274425 ) but I'm not able to find all files nedeed... is here someone who can help me? it's the same for me downgrade the rom or fix bluetooth problem.
I have the original rom downloaded from www.pocketdevice.it but when I try to install it, the installation software sais that with wm5 it cannot install the rom (ROM.Qtek.9090.v.1.40.04 ITA).
please excuse me for my bad english! I hope that I've been quite clear to explain my problem..
edit:
I found this page http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade but
# Qtek 1.40.556
# Qtek 1.40.553
# Qtek 1.40.147
doesn't work...
edit 2:
I tryed to restore an old backup but wm5 doesn't accept wm2003se's backup.. wm5 doesn't accept backup at all.. uff..
first to exclude the most common mistakes:
- did you set the phone in bootloader before starting the flashing?
- did you use the BAupgrade_noID.exe, instead of the BAupgrade.exe?
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Lollo_RM said:
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Click to expand...
Click to collapse
I know that, when you try and flash the original rom or original updates, you usually don't have to do the things above, but, when i had to downgrade to wm2003se, it wouldn't have worked without.
1. i try and attach the _noid.exe that i downloaded with a helmi rom, as google wouldn't find a direct download source and i wouldn't want to search this forum forever, and as you don't search it yourself, i assume you don't want to spend more time looking for it as well. Anyway, the noid.exe is the same flashing prog as the original but it bypasses the check for country id and other crap.
2. the bootloader mode is also essential because, well... i don't know, why exactly, but i assume that not all roms and flashing software manage to enter the bootloader mode correctly, or too late, and you could get stupid errors like it was the wrong device for that flash.
so, i hope, the upload worked, it is everything you need to flash your device, either put the "nk.nbf" of your rom in there, or unpack the original rom and put the noID file in that folder and start it
ok, i did exactly what you wrote and now everything work! thank for you help!
why would you even downgrade? i upgraded mine to wm6 and i think i'm not going back to 2003se
first of all, because english is not my mother language and the os language is english. i found some problems using bluetooth and wifi connections and i could not download the right patch so i decided to downgrade to wm233se
SIM TOOL KIT is the only reason one would want to downgrade
Maybe you could try an 6.1 ROM.
RUU_BA_xplode_WWE_6.11.00 works perfectly and has an standard wm6
interface.
sorry for my english.
guys I locked my imate bought a week ago and tried to put a new rom.
I read a couple of guides to resurrect attack but if your phone to pc I hear the phone attached with the usual sound on the pc but not the icon turns green PC sync. Then I try to put the rom and give me error "units require modification."
ipl 2.21
spl 2.21
help me
help me please
gianfy.c said:
help me please
Click to expand...
Click to collapse
man you should read, if your ipl and spl are 2.21 you have G3 Wizard and you should follow its flashing threads! Anyway you did not provide neccesary information to help. So if you did not read and did not understand everything, you should not try to flash the ROM, to keep your device working So any help i can give you is to find a thread which is related for G3 Wizard and read and search there, you can also go to Wizard Wiki for all the information at one place...
well i k-jam & all roms working well.
what is the specific problem !!!