Database Develop

Maybe CID Lock problem ? NEED HELP !!!!

Hi, After the soft reset comand, I removed the battery from my Wizard. After that the followin problem was appear: the phone is bringing up to the splash screen and STOP on this position.I have tried to download another Rom but the problem still is the same. My Phone is not CID unlock and before this, I cooked own rom like is writen here http://forum.xda-developers.com/showthread.php?t=271043 . So any idea how to wake-up my phone MDA Vario.

Ok forgive me if I'm wrong here, I don't really want to judge before I know the full story, but seems to me your brain went on strike momentarily. First rule of flashing any unofficial rom CID UNLOCK YOUR DEVICE. Anyways sorry, I just wanted to say something so it doesn't happen to you again, that said, what rom did you try to upgrade to? what rom did you try to downgrade to after that? is your device a G3 or G4?
If your device is a G3 I would recommend downgrading to this rom by xelecin
ftp://xda:[email protected]_RUU_Wizard_1081002_108_10910_ENG_US.exe
it will ask you if you want to CID unlock your device at the start so you shouldn't need to worry about forgetting this time , if you can't connect your device to activesync just go into the bootloader (hold the camera, voice dial buttons while pressing the reset button) and once it connects run the set-up.
Oh another thing before I forget..... do some searching and read up a bit, because this is a pretty common topic on this forum, best of luck and hope everything works out ok. If not, report back.
*edit* I just noticed the thread that you linked to, I actually wasn't aware that this was possible, but anyways I think it's still much safer to CID unlock your device if possible, and another thing you might try replying in that thread if it doesn't work out since they should be more knowledgeable in the matter..... and that would help keep the forums less cluttered *edit*

Thanks, for your help, Unfortunately you are totaly right for my stupid act (again). At first i tried to solve the problem alone , but whole day I roam through this forum to find solution but I can't find the same problem like my. Maybe because of my ..... brain .Anyway I am with G3. NOW I have
IPL 1.0
SPL 2.26
GSM 01.09.11
OS 1.5.4.2
This is after this procedure http://forum.xda-developers.com/showthread.php?t=263116
I tried also to download also and Molski's 2.26.10.2 AKU2.3 Rom a.k.a. 2.26.10.2 Final Edition Rom, but the problem is the same : The splash screen is running and STOP and.... nothing.
I can go to bootloader and can download new rom, but I can't start fhe phone.

Yeah I know these forums aren't the easiest in which to look for info. So you can go into the bootloader, that's good. Don't try to go to a AKU2.x rom or later, keep it under that, so no 2.26 roms at all. 105, or 108 roms should be good.
Did you try the rom from the link I provided or the one on the thread? and afterwards did it go into the phone at all? My friends MDA had a similar problem last week, caused by the same thing, though in your case I see the SPL isn't updating when you install new roms on his it was the os that wasn't updating, but as soon as I installed that rom I recommended it booted up fine, then I updated his device to molski's 2.3.
I'll check back in a few so let me know how's it going.

Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.

DoCtOr_X said:
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
Click to expand...
Click to collapse
Ok, but tell me how to solve this :
"qiote"
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
"quote"
I don't have access to the phone explorer and phone at all.
masr1979 I have tried the rom you give me, but it look like there is some things I don't understand: When I start the exe file i have choice <continue> .Whet I type <c> 2(two) time the soft tell me <no device found> and order me to continue with copy ???. After few seconds tell me that Unlocker ..... Done!, and start HTC wizard Unlocker and NOTHING !!! Stop on this position more then 15 min. and only the led for charging on the phone is active.

Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...

Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.

masr1979 said:
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
Click to expand...
Click to collapse
Of course I'm not sure, but I thing it was 2.21. Anyway did you think that is posible to cook my own rom in G4? I'm totally confused.
Every time when I upload new rom I have this:
http://forum.xda-developers.com/attachment.php?attachmentid=32884&stc=1&d=1168184491
IMG_2976.jpg
...and also this is my bootloader screen
http://forum.xda-developers.com/attachment.php?attachmentid=32885&stc=1&d=1168184491
IMG_2977.jpg

Dr Puttingham said:
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Click to expand...
Click to collapse
Thanks, but I try to find oficial rom but without success. And very interesting thing I found.. when I start to upload new rom the soft start to check my old rom and after that tell me that i have GE (german) language, but my old was WWE ?
Is it posible some one to give me some link to official 2.x ROM but for T-mobile german language.

Well the other day I tried finding that german rom for a while.... that search was going nowhere, I saw this thread, I don't know if you might want to check into it and maybe try it out. There's mixed results apparently but who knows
http://forum.xda-developers.com/showthread.php?t=276963

Wizard Crash at Boot Please help

He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help

try this
Firware an old rom back on the device prefrebly the one you ohone came with and make sure you phone is cid unlocked. Also have you tried a hard reset

Force bootloader mode!
Check this out!
http://forum.xda-developers.com/showthread.php?t=294107
That worked for me and others!
Good luck!
ghailoo said:
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
Click to expand...
Click to collapse

A couple of things to start with. First of all get you device back working. As mentioned by epimazzo above, force your device into bootloader and flash a stock ROM not a cooked one. Read the thread.
Once you have got your device working start reading before making any more rash decisions about upgrading to WM6 (especially when the file name hints that it is for a Prophet and not a Wizard). There is only one leaked Crossbow ROM for a Wizard. This has been cooked a few times (Orwell, PDAViet, Underground). There are many threads on the merrits of each ROM but you need to read read read before you end up with a brick.

Fixed Boot crash problem
Thank you Guys for all the help; I got it back running.
formatted : Push the network button and the voice button and reset then release the rest and you get the balck screen that has the press send button and that formats Wizard and then
Push the Power + Voice + Camera and I get the Red Green and White screen. quickly Update the ROM to the origunal one I have T-Mobile. It worked. You guys are the best. I found 5._Underground_edition_Crossbow_ROM But I was not able to flash it. I need to unlock the CID but I read that I would have to down grade the Wizard and then Unlock the CID. I am still looking for the old ROM.i think I found it. If anybody has a better way to Unlock the CID please tell me.
Thank you a Million tiles for all the Help guys.

**** !my phone became a madbox

my t-mobile mda compact got hanged at the bootloader mode(3 color mode) while upgrading to wm6 rom.i had done everything as told in vlodeck's thread about upgrading to wm6.but got stuck in 3 col mode.also tried to glash it with t-mobile official rom.but its giving me an connection error while upgrading.my 3 color mode displays only following text
IPL 2.06.0001
SPL 2.06.0001
PLZ PLZ HELP ME GUYS iam a newbie to this forum.plz plz plz guide me to get it back to my wm5 today screen.i had seen xda-dev's solving problems of many members.plz solve mine as well

can you explain more? what happen after u got stuck while upgrading to wm6? then what did u do when u trying to flash it back to wm5?

i tried to upgrade it with wm6 from wm5.it got stuck at bootloader mode givin the above info(ipl....)i tried the wizardlove rom.it did worked,but with no sound and constant battery error even if my battery is 96% charged.what should be done to it now .and fikri bhai,thnx a lot for ur concern.guide me more if u can

did you try tmobile orginal rom?there are some orginal tmobile roms on xda-developers.you can find link in this forum and try them.they should work.how do u know your battery is %96?is your wizard opening correctly?also wizard rom has omap be sure overclock status isnt active,also download latest active sync.if already installed uninstall and install new version....i hope you will be able to fix..cheers

First Download the Base rom from below given locations..
T-mobile UK
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
T-mobile US
http://www.t-mobile.com/wmupgrade/
Search for the original rom for any other
instructions on how to use the original rom can be found here
http://support.t-mobile.com/knowbase/root/public/tm23294.htm?&A2L.SERVICE=AboutUpgrading
Before your do this charge your phone full using.. power adoptor. first..
then put it in bootloader mode..( 3 color screen ) then install above rom.
hope this solves your problem...

mayur9890 said:
i tried to upgrade it with wm6 from wm5.it got stuck at bootloader mode givin the above info(ipl....)i tried the wizardlove rom.it did worked,but with no sound and constant battery error even if my battery is 96% charged.what should be done to it now .and fikri bhai,thnx a lot for ur concern.guide me more if u can
Click to expand...
Click to collapse
your device are G3. have you cid-unlocked your wizard? i would suggest you to flash your wizard to its original rom. then we'll work from there if the problem is still there. goodluck

hey nasir what r u saying.i thought my device was g4 as per the g4 thread.& i was making the attempts to flash just like the g4 thread.plzz clarify all u guys is my device a g3.coz i read somewhere that installing a g3 rom on a g4 bricks the device totally .
plz plz reply to me guys .iam in a bigbig problem

Your device is a G4. You gave your IPL/SPL as 2.06.001 which is a G4 if it were a G3 your IPL/SPL would only be 2.06. You aren't doing anything wrong by following the G4 directions.

A *G3* Wizard will have the following:
IPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.).
_SPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.)_
A *G4* Wizard will have the following:
_IPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
_SPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
Click to expand...
Click to collapse
from wizard wiki. ur device is g3 since your
IPL 2.06.001
SPL 2.06.001
note that there are only two zeros.
regards,
fikri

iam really sorry fikri bhai.actually I didn't posted the correct info.I checked it 1nce again and it was like ipl & spl both are 2.06.0001.thus clearly its a g4.but iam still not able to get the correct working rom on my piece.now iam getting totally frustated with roms.only the wizard love rom is working & that too with no speaker sound and 0% battery error.even when the led shows green light

have you tried official tmobile AKU 3.8 rom? i find it very stable and fast. if you have tried many roms and the problem still persist, sorry, i have no idea to help you. all d best
regards

HELP!!! Device (Qtek 9100) dead after upgrading.

Hi, i followed the instruction fro unlocking my device (Qtek 9100) and then installed IPL_SPL_3.08. After that i tried installing Crossbow_Reloaded_1.7_Final and my device rebooted and it now doesn't turn on! I tried removing the battery for a while but still... Is there anything i can do to save my device?
PS: i first installed a 2.xx IPL and SPL but then the "Crossbow_Reloaded_1.7_Final " would not load saying it was incompatible URR version or something similar, so i instaled IPL/SPL 3.08.
My device now won't start or charge. It seems dead Is there abything I can do about it?
thanks

If you didn't figure out your device is G3 or G4, and you can't even power on the device, then it is a brick now. (G4 Wizard cannot upgrade IPL/SPL)
You need to either recover it using JTAG or replace the unit if possible.

thx for the reply.
Firstly i followed this guide:
http://forum.xda-developers.com/showthread.php?t=298613
And at the following step:
"0. First determine if you got a G3 or a G4 device. When you turn on your device from can can see you're IPL and SPL version on the screen. If you got IPL/SPL 1.xx or 2.xx you've got a G3 device. If the IPL/SPL shows 2.xx.xxx1 you've got a G4. Go to step G3.1 if you got a G3 and G4.1 if G4."
My device had 1.xx IPL/SPL and i used "Wizard_Love_2.26.10.2_WWE_Novii_CF2" to update it to 2.26. the procedure was successful.
I then CID-unlocked the device and then flashed to "AKU2" successfully once again.
I then flashed to IPL/SPL 3.08 (since i determined i had a G3 device ) and that's when y device did not start again.
Providing the above can anyone tell e wether there is any way of saving my device?
thanks

starkwong said:
If you didn't figure out your device is G3 or G4, and you can't even power on the device, then it is a brick now. (G4 Wizard cannot upgrade IPL/SPL)
You need to either recover it using JTAG or replace the unit if possible.
Click to expand...
Click to collapse
So it is possible to save my device by using JTAG? (which i don't know what it is yet, so i am going to search the forum a bit to find out).

neochris said:
So it is possible to save my device by using JTAG? (which i don't know what it is yet, so i am going to search the forum a bit to find out).
Click to expand...
Click to collapse
dont put too much hope on this JTAG thing. It is still no details on this yet. Try getting the unit into bootloader mode (3 colour screen) and flash again if possible. If you are not able to get it in to bootloader mode, chances are, you have a bricked.

I took the device to an HTC service store but he said not to expect much and that i would probably need a new mobo. When i hear from him and if the news are bad i will probably try the JTAG thing. Does anyone have some info, links etc about JTAG for Qtek 9100? someplace to start from. If it IS bricked i might as well give it a shot.
Any recommendations always welcome.

neochris said:
I took the device to an HTC service store but he said not to expect much and that i would probably need a new mobo. When i hear from him and if the news are bad i will probably try the JTAG thing. Does anyone have some info, links etc about JTAG for Qtek 9100? someplace to start from. If it IS bricked i might as well give it a shot.
Any recommendations always welcome.
Click to expand...
Click to collapse
Someone posted in the forums in the past few days that they had successfully recovered a Wizard using JTAG, so there is hope.
Edit: The posts are here..
http://forum.xda-developers.com/showpost.php?p=1209390&postcount=137
http://forum.xda-developers.com/showpost.php?p=1209398&postcount=138
I suggest asking nicely for cesarr4 to share the info...
Also, sounds like you had a G3 (since you had a 1.x IPL/SPL to start with) and it sounds like the 3.08 IPL/SPL you flashed maybe was for G4 only..

titus666 said:
Someone posted in the forums in the past few days that they had successfully recovered a Wizard using JTAG, so there is hope.
Edit: The posts are here..
http://forum.xda-developers.com/showpost.php?p=1209390&postcount=137
http://forum.xda-developers.com/showpost.php?p=1209398&postcount=138
I suggest asking nicely for cesarr4 to share the info...
Also, sounds like you had a G3 (since you had a 1.x IPL/SPL to start with) and it sounds like the 3.08 IPL/SPL you flashed maybe was for G4 only..
Click to expand...
Click to collapse
Thanks titus666 . Now i got my hopes up again! I just caled the technician i took my wizard to and he told me there's nothing he could do. (he only could help if the device would turn on apparently, but if it would i could try doing that myself. Wasn't too helpful but i had to try. HTC specialist they say. anyway.)
I just asked cesarr4 for more info and hopefully i will gather enough info and try and fix it myself. Will post my results when i do.
thanks for the replies guys. Much appreciated

Diud you soled the problem?

9100 dead
What's happen?

Please Help Me. Urgent!!!

Hi Mates i have Imate-K jam wiza200
last night i planned to upgrade it. and downloaded the ( See No Evil V2.0 ) WM6 Rom.
i started the upgrade process. and it stucked at 99% and now when i start my device its only displaying 3 colour texture screen and only written.
IPL 1.06
SPL 1.06
and now its also not connecting to any usb. but when i put the usb. the usb label appears on the bottom left corner of my device. so please suggest me which rom i will use to fix that problem.
Regards

Unlock First - you must read the forum!!!!
You have to unlock your Wizard please read the firts thread
[READ FIRST] The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards

ruk_design said:
Hi Mates i have Imate-K jam wiza200
last night i planned to upgrade it. and downloaded the ( See No Evil V2.0 ) WM6 Rom.
i started the upgrade process. and it stucked at 99% and now when i start my device its only displaying 3 colour texture screen and only written.
IPL 1.06
SPL 1.06
and now its also not connecting to any usb. but when i put the usb. the usb label appears on the bottom left corner of my device. so please suggest me which rom i will use to fix that problem.
Regards
Click to expand...
Click to collapse
You need to CID unlock AND you need to upgrade to an official 2.xx rom BEFORE flashing a WM6 upgrade as they don't contain IPL/SPL and you will have all sorts of issues flashing a 2.xx or higher os into 1.xx bootloaders.
And I would suggest at the very least reading all the sticky posts in this forum before you continue with your flashing mission, it will save you from some unnecessary stress and anguish over why your device isn't responding to a flash the way you wanted it to.