Sprite Backup in ROM Upgrade Mode for Radio Upgrade - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I've used Sprite Backup in ROM Upgrade mode for bumping from ROM 1.06 to 1.42 on my T-Mobile UK MDA -- just peachy. But I didn't do it for Radio upgrade from 1.13 to 1.15, and upon restore, had Restore with Errors -- some sharing violations, for things like CallID.dll and such.
I wonder, does it make sense to do a restore from my initial backup in ROM Upgrade mode, with the UpgradeData.sbu I created then, or it should be OK -- basically, do these sharing violations mean restore tried to overwrite the new stuff, but couldn't and left it alone?

Related

Sprite backup from Summiters v2.25 to official cing2.25 Rom

Sorry if this is a dumb question -- if I change from Summiters v2.25 to the official cingular 2.25 Rom on my 8125 -- will i be able to use sprite backup to reload all of my settings and files etc? Thanks for the help

Is my Wizard a brick after upgrade and attempted SPB restore

Greetings,
Ive just upgraded to the latest xcelencin ROM without issue.
When I attempted to restore (using SPB) from the backup taken just before the ROM upgrade SPB complained that the restore was not responding, so I cancelled it.
Now the machine will not boot past the Windows Mobile 5 splash (afer the Tmobile splash).
Any ideas?
Thanks
if it gets to the win mobile screen, u can probably re flash it. should work then.
Did the same on mine , had to hard reset using comms manager and voice dial buttons and reset button. think it was caused by using spb backup after changing rom.
Guys and gals, NEVER restore with Spb backup (or, for that matter, ANY backup app unless it's called Sprite Backup) after an OS upgrade!!!!
Read http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1270&more=1&c=1&tb=1&pb=1 for more info on all this (you may want to search for (Ctrl-F) "device upgrade" to find the relevant info ASAP.)
had the same exact problem - upgraded from xelencin's 2.24 rom to the 2.26 rom - and tried a restore - no go - had to hard reset and start from scratch

Backup existing ROM-Help needed

Hello,
Is there any proven method to backup the existing rom to a form of files like the Updated ROM (nk.nbf,RUU,etc.)?
I would like to preserve my original wm5 ROM since it contains Payed application i can't re-register.
After backing up-it will be WM6
Thanks
Roy
im looking for the same thing too
because i want to try out other roms but i have alot of stuff on my current phone
i know theres a utility that will backup to the minisd card and your able to back it up later
no luck yet
im still searching the forum and google though
No, for most backup applications, you can't restore a WM5 software backup to WM6 device, otherwise weird incompatibility will be happened (such as crashing Contacts)
Yes ! very true,there wud be a incompatibility issue,however if you backup your wm5 rom on a Sdcard,that is also only possible if you have a CID unlocked device,then in time of any emergency,you can reflash it back to your phone,through Sdcard method to restore it back in working condition,but all you applications or programs in wm5 cannot be restored back to wm6 OS.
Cheers
Thanks for you help,
my thoughts were to keep the original ROM for selling this device..
Roy
http://forum.xda-developers.com/showthread.php?t=276963
This is the way to make a copy of your current ROM of the Wizard to a SD card.
As stated above this does NOT include any application or data you add yourself to your Wizard but only those apps that comes along with the ROM in the first place.
This should be just fine to have a backup of your current WM5 but does not help to "preserve" any paid applications you installed yourself neither your contacts etc.
Good luck!
..............

How can I COMPLETELY backup my factory ROM?

Hi,
I want to upgrade my Wizard to WM6 but want to backup/save my original factory rom, the one that came with the phone when I bought it aka the one that Cingular installed just in case I need to revert. I looked everywhere for this issue before posting but did not find a clear answer. I saw that you can backup to mini SD but once again, the instructions were not clear. What I essentially want to do is, backup the original ROM and in case I do not like one of the WM6 roms (hard to believe), I would revert back to the original rom. Can anyone out there provide a clear answer and if so, provide instructions? I know some people have done it with something called "mtty" but I have no knowledge of this program and therefore, do not know how to use it. Thanks in advance for your time and your help!!
If you dont understand how to use MTTY to backup your rom to sd card, then simply go onto the cingular site and download the rom for your device.
Then backup all your data with active sync(XP) or Windows mobile device center(VISTA). Install Sprite backup and use it to backup all data on your phone. it will be a trial version, but it enables you to make backups and restore them, even when the trial has expired you can still restore the backups you just cant make any more new backups unless you buy it.
then make sure your device is cid unlocked and download the WM6 rom you want to try and flash it, if you dont like WM6 you can reinstall the cingular rom and restore the backup you made using sprint backup.
Major note You CANNOT restore a FULL backup that you made from your cingular rom onto the WM6 rom, if you do, the device wont boot and you will have to reflash again.
You can restore a partial backup though ,of say your messages and PIM data and any files in my documents but do not try to restore the windows files.
Hope this helps
Oh i forgot to mention, it is a Pain in the arse trying to flash cooked roms in Vista, so if you have Vista i would recommend using an XP machine to flash, flashing original roms works fine in Vista though
I see, thanks for answering man. That helps.

Sprite backup

i just flashed my Tilt from ATT wm6 to HTC wm6.1
I created a backup file on Sprite Backup. Now i want to restore it and it says that it can cause significant problems if i restore from a different ROM. And wants me to select a Device Upgrade File. Where do i find a Device Upgrade File?
You shouldn't do upgrades from ROM to ROM (especially if it's from 5 to 6 or 6 to 6.1). There's a whole new registry usually and a lot of different things. Just add the program files back and stuff like that, but not the registry. Better yet, reinstall everything manually.
Okay, darn. lol
Now Im learning.
Thanks
starclassic said:
i just flashed my Tilt from ATT wm6 to HTC wm6.1
I created a backup file on Sprite Backup. Now i want to restore it and it says that it can cause significant problems if i restore from a different ROM. And wants me to select a Device Upgrade File. Where do i find a Device Upgrade File?
Click to expand...
Click to collapse
Just thought i'd share, the latest version of SPB backup does let you
restore after ROM upgrade (ROM upgrade mode) & also restore a backup on another device (device upgrade mode)
here's the link: http://www.spbsoftwarehouse.com/products/backup/?en
Cheers.
The Reaper said:
Just thought i'd share, the latest version of SPB backup does let you
restore after ROM upgrade (ROM upgrade mode) & also restore a backup on another device (device upgrade mode)
here's the link: http://www.spbsoftwarehouse.com/products/backup/?en
Cheers.
Click to expand...
Click to collapse
Warning: spb does not yet fully support WM6.1 for his Backup. With Kaiser (WM6.1) it does not work properly (lot of device hangs).
I Think its bricked
I when ahead and downloaded the new rom with WM6.1 for the ATT TILTfrom the HTC website and did everything to the bone and used sprite backup to backup my files but upon restoring them, my screen just boots through att logo and then shows the flying 3G symbols and then blank screen. I can get to the boot loader and but when I try to reflash my phone, using hard spl it says it cannot find my phone. I have spl 3.56 on my phone. Can anyone help me?
When you're in bootloader mode, just flash to the stock ROM and you should be fine.
Thanx all!
I just want to say thanx to everyone who responded and great thanx or asfoor for the wonderful solution for this problem which can be found here.....
http://forum.xda-developers.com/showthread.php?t=348659

Categories

Resources