Printing from the Wizard (HP MobilePrinting?) - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi there!
For quite a while now I'm searching for an app making it possible to print from the Qtek, via LAN, WLAN, IR, no matter (well, nearly)...
all I found was the HP MobilePrinting solution, which (at least on my device) doesn't work (installed on the machine as well as on the storage card). The app always complains that the hpprintcenter seems not to be certified or a component is missing... well.
The only other app I found was Vanguard Printing, which I can't test due to a lack of IR-printers... :?
Does anynone know a solution to get the HP app running or at least a complete different program making it possible to print?
Aah, before I forget it: what about freeware?
Thanks a lot.
Yul

WestTek maybe your solution...
WestTek just updated all their software to support WM5. One of the programs is called JetCet. It allows you to print from your device. They have a 14 trial period for all their software.
NOTE: The only problem I've found so far is that their printing software (currently) does not support IP printers. You cannot configure a printer with only an IP address. You must use a printer that has a dedicated print server.
I don't know if they (WestTek) plans to upgrade their software in the future that will support IP Printers.
Justin
BTW. I think their software works well. I've printed PDFs and PowerPoints (2 slides per page (and no, you can't change that)) and they look decent. Obviously, printing from a workstation is better, but for a mobile printing solution, it works very well.

Re: WestTek maybe your solution...
weatheryoko said:
WestTek just updated all their software to support WM5. One of the programs is called JetCet. It allows you to print from your device. They have a 14 trial period for all their software.
Click to expand...
Click to collapse
i am going to google this to find them, but for others that come after me, and perhaps if I cant find them, how about a url to them/their product?

Here ya go......
www.westtek.com

Bachmann PrintBoy does it... aaargh.
I tried the WestTek product just to find it doesn't work for me. There are only a few (Canon, HP, Epson) network-printers supported and it was impossible to get it going with my HP JetDirect printserver... not a generic approach.
So at least my biggest fear came true: the most expensive program I tried is the only one working under WM5! I can't believe it...
Bachmann PrintBoy7 does the trick, although the built in 'configure' dialog didn't work for me - calling the appropriate executable solved the problem. Besides that it's a charm to configure.
Bachmann asks for 'only' 49.99 Dollars!
That's a lot of money for printing a page once in while!!!
And they don't support the WM5 NoteTaker .pwi file-format! Nobody knows why.
All this only because MS skipped the implementation of a printing service due to more resources... :x
Does really nobody how to run the HP PrintingService under WM5?
Any progs I don't know?
Take care.
Yul.

I believe the mobileprinting software from HP is for WM 2003 only. I don't think they've come out with a new driver for WM 2005.

jwzg said:
I believe the mobileprinting software from HP is for WM 2003 only. I don't think they've come out with a new driver for WM 2005.
Click to expand...
Click to collapse
HP no longer offers their Mobile Printing product -- they announced this some time ago on their web site -- so there will not be a WM5 version.

Related

BlackBerry Application Suite for Windows Mobile 6

Does anyone have a link for this download? I have the new AT&T Tilt working with BB Connect, but cannot find the download to the BlackBerry Application Suite for Windows Mobile 6.
Don't think the app suite is released as of yet.
Why would you want blackberry suite?
As mentioned above, the Blackberry Application Suite does not exist. Its never been released. not sure if it ever will be.
But if you are looking for Blakcberry Connect for WM, that does exist. See my post on this thread. And in the future, you might try searching some.
http://forum.xda-developers.com/showthread.php?t=344203&page=2&highlight=blackberry
Blackberry Application Suite to be release Q1 2008
jomo25 said:
As mentioned above, the Blackberry Application Suite does not exist. Its never been released. not sure if it ever will be.
But if you are looking for Blakcberry Connect for WM, that does exist. See my post on this thread. And in the future, you might try searching some.
http://forum.xda-developers.com/showthread.php?t=344203&page=2&highlight=blackberry
Click to expand...
Click to collapse
HI, I have been battling with BBC against to our BES due to policies and I heard from a very reliable source that the product will be ready for our deployment Q32008... So its is coming and I think will support the encryption etc and will be support friendlier since the interface is a propiraty BB interface. Plus, there aren't many security risks around virus etc since it will be a virtaul application suite that supports any BB application and doesn't integrate to VM mail client etc.... So, you can have your WM as a standalone OS once you minimize the BAS... These are great benefits for enterprise adoption and really simplifies the risks around the device support when compared to BBC running on any WM device (or symbian etc)...
as of 2009, it hasnt been released. At least its been showcased and that bring a hope for it to be soon.
it been 2 years since when RIM Compeny said they gonna release it but they haven't released it yet!
its a vaporware.. playing on our patience...
it would make WM so much more powerful... and blackberry so much more popular... when will the two organisations ever realise it?
Here you go (for the Touch Pro): http://forum.xda-developers.com/showthread.php?t=626456

Remote Desktop Mobile on Kaiser - Any Ideas?

Hi guys, looking for some pointers with this one.
Having usefully used Terminal Services on the TyTN to remote support Windows machines while out in the field, I've upgraded to the Kaiser only to find that not only is the improved Remote Desktop Mobile from WM6 not included in the build, but neither is the previous Terminal Services Client. This is a major problem for me as I don't want to have to carry two devices with me (never mind 2 SIMs and contracts!)
Having searched around it seems that Microsoft decided not to make the inclusion of Remote Desktop Mobile madatory in the build, but to offer it as an option to carriers and manufacturers. It also seems that this is something which none of the carriers has opted for - and definitely not Vodafone UK as in my case.
This really has crashed a major downer onto the otherwise brilliant bit of gear which is the Kaiser.
Has anyone any access to the RDM app for installation onto the Kaiser, or, failing that, an "easy" way to port the old TSC from the TyTN?
Try this... this is a remote desktop prog. for PPC on WM6 devices
Its available in the thread where all cabs are located (http://forum.xda-developers.com/showthread.php?t=332438), following the big link there will point you to the wm6 remote desktop cab (http://www.cinetsystems.com/xda/Kaiser Cab Collections/WM6_RemoteDesktop.cab)
Thanks guys, brilliant work and saved me loads of gief.
(BTW - I did search across the site but couldn't anything - I'll make sure I try harder next time!)

H.323 WM6 client (like Netmeeting)

Hi guys!
Is there a working H.323 client that works with Kaiser?
I would like to connect to company's PBX, and damn /// still support only H.323, not SIP in this sw version.
Netmeeting is working fine on my laptop, so I hope to find something for the Kaiser as well.
Thanks,
T.
Bumping the post
Anyone?
T.
thomek said:
Anyone?
T.
Click to expand...
Click to collapse
Not really seen anything specific but this may whet your whistle!!!
http://www.engadget.com/2007/11/12/windows-ce-6-0-r2-to-support-videoconferencing/
Windows CE is the base core of our system so it all filters down.
Thanks mate, but I hope of finding something sooner than the new M$ release of operating system and video conferencing. All I would really like to see is plain VoIP client that supports H.323 beside SIP.
I do know that Ericsson has developed clients that work with their PBXs using H.323 protocol, but they are developed for their smartphones using Symbian (P990, P1...)
T.
Not exactly sure what functionality you're after... but I thought Skype has conferencing features.. and it's free.
I don't know if you already looked on the internet for software, but I found this app: SJ Phone
More info is to be found on their site:
SJphone® is a VOIP softphone that allows you to speak with any other softphone running on a PC/PDA, any stand-alone IP-phone, or using Internet Telephony Service Provider (ITSP) with any traditional wired or mobile phone. It supports both SIP and H.323 standards and is fully inter-operable with most major VOIP vendors and ITSPs.
Click to expand...
Click to collapse
http://www.sjlabs.com/sjp.html
I haven't used it, so I can't confirm it works on the Kaiser. But I suggest you give it a try.
Good luck!

GPS- Ordanance survey co-ordanates

Ive searched but to no avail-BUT i may not be searching correctly. Is there GPS software out there that will display ordanance survey co-ords real time on my today screen?(or SPB mobile shel integrated to be really greedy). I work in planning and visit a lot of country building sites and these would make life a lot easier in the more 'off the beaten track' locations. Anything?
I have not tried it, but this one called Nav Mobile seems to be like what you are looking for.
There is also an (old) utility called OS GPS Convertor - get it HERE - that converts GPS long./lat. to O/S coordinates, plus it even claims to work with Tomtom. The version on the web site is for PPC2003 , so it may not fly with WM6.0 or 6.1 - gotta be worth a try though??
HTH,
Mark.

Help, Pocket e-sword squeeze mostly in 2009 ROMs

Please help, why pocket e-sword menu for book, chapter, and verse are squeeze in mostly new ROMs dated 2009.
This program was work perfectly in earlier ROM.
Any solution?
Same issue
I've had this same issue with the shrunk toolbar icons and misalignment of some of the controls. I'm not sure what the solution is.
One more
I've been using pocket e-sword since ages (dell x50v, Hermes, Kaiser, Raphael) and this is the first phone which has trouble displaying it. Actually my original 1.90.405.1 Raphael ROM did show it correctly, the trouble came with the official 5.05.401.1 upgrade in February.
I can confirm that EnergyROM 2.0 41609 also suffers, though e-sword was one of the first things I tried on it :-(
Maybe we should also bug Rick Meyers to try to see the cause of the problem. Hopefully all new WM phones, not just HTCs will be effected, so the pressure might increase. He upgraded the program when the new VGA PDAs came out.... The best Bible program in my opinion!
I sent him this bug report:
[greetings...] This February I upgraded my VGA WM6.1 HTC Touch Pro to a new ROM version, and e-sword appears garbled. As I've been searching for a solution to this problem I'm starting to realize the amount of people being effected, anybody with a newer HTC phone: VGA, WVGA alike :-( While we are trying to find a solution, I can imagine it might be a very little change in your program which could fix the problem... Maybe not...
The icons shrunk to quarter size, forms squeezed to half width (I'd gladly send screenshots, let me know if they would help). I'm still trying to use the program, but it's almost impossible. Maybe there's an easy fix. I'd guess it has to do with the screen metrics the OS reports to e-sword and the way e-sword then uses these values. People also think it could be related to .Net 3.5, but even if I force my PDA to use 2.0 it doesn't seem to fix. [greetings...]
Click to expand...
Click to collapse
I have the same problem. Thanks for informing Rick Meryer.
vgergo said:
I've been using pocket e-sword since ages (dell x50v, Hermes, Kaiser, Raphael) and this is the first phone which has trouble displaying it. Actually my original 1.90.405.1 Raphael ROM did show it correctly, the trouble came with the official 5.05.401.1 upgrade in February.
I can confirm that EnergyROM 2.0 41609 also suffers, though e-sword was one of the first things I tried on it :-(
Maybe we should also bug Rick Meyers to try to see the cause of the problem. Hopefully all new WM phones, not just HTCs will be effected, so the pressure might increase. He upgraded the program when the new VGA PDAs came out.... The best Bible program in my opinion!
Click to expand...
Click to collapse
Thank u Vgergo, hope Rick Meyers will able to fix it ASAP.
I agree that this is the best Bible program and its free.......
rvs97 said:
Thank u Vgergo, hope Rick Meyers will able to fix it ASAP.
I agree that this is the best Bible program and its free.......
Click to expand...
Click to collapse
hi Guys,
I've tried bugging Rick for a few months now and have had no reply. I think he's been busy with the E-Sword NET project
WizP said:
hi Guys,
I've tried bugging Rick for a few months now and have had no reply. I think he's been busy with the E-Sword NET project
Click to expand...
Click to collapse
I submitted the problem twice through the website with no reply. Sounds like he's got to be well aware of it by now.
I've got some commercial software that works ok, but it just doesn't function as well. Also, there aren't as many commentaries available.
I've been looking around for a solution to this problem as well. I have a Sprint Touch Pro; it works when I use the original ROM that came on the device, but on any other ROM from any kitchen that I've tried (including WM 6.5) this problem exists where the program seems to think it is on a QVGA device,. I've gone through the registry looking for the possibility that something has the wrong resolution encoded there, but I've not been successful.
There is a config file for the Pocket e-Sword itself; perhaps on VGA devices it sets a value in this file (for those cases where it works)? I'd rather not go back to the stock ROM at this point, so perhaps someone else can look at this file (\Program Files\Pocket e-Sword\Pocket e-Sword.config) to see if there is anything related to resolution there when it is displaying correctly?
I've emailed Rick Myers through their web site also, and like the others I've heard nothing unfortunately so far.
Confirmed
I can also confirm this on elite RC3 ROM for the Fuze.
Thanks for bringing this up, Im running the NRG Rom which is great but having the same issue. Esword working properly would make make the Fuze the best phone I have ever had.
Jeremiah 29:11
Zoidborg said:
There is a config file for the Pocket e-Sword itself; perhaps on VGA devices it sets a value in this file (for those cases where it works)? I'd rather not go back to the stock ROM at this point, so perhaps someone else can look at this file (\Program Files\Pocket e-Sword\Pocket e-Sword.config) to see if there is anything related to resolution there when it is displaying correctly?
Click to expand...
Click to collapse
I have an old backup of my memory card from the time pesw used to work. I cannot see any resolution setting in here.
older version
I have an older version that was on a memory card i bought. As I do not believe in god(s) u r welcome to it.
vgergo said:
I have an old backup of my memory card from the time pesw used to work. I cannot see any resolution setting in here.
Click to expand...
Click to collapse
I agree, the config file is just for storing personal settings. What we need is a response from RM. I've sent bug reports in the past and never had replies, which is a shame!
I'm glad someone mentioned that forcing .net 2 doesn't help I was about to try that!
Here are the ROMs I've tried that e-s has these problems with:
Official HTC Touch Pro Updated ROM
Elite ROM RC4
Shep's ROM 21222
Shep's ROM 21232
I haven't found a modern ROM that works as yet but if I do I'll let everyone know.
If only Pocket e-Sword were an open source project!
monkeyfishing said:
If only Pocket e-Sword were an open source project!
Click to expand...
Click to collapse
I also am annoyed that Pocket e-Sword is not an open source project. GRR..... I am another long term user of the program that can't now use it since I have a Raphael. My wife has the same problem as she now has a Diamond.
If anyone would like to contact Rick Myers directly, whois gladly provided his contact information, including a phone number. Who knows, it might work!
Code:
MEYERS, RICK
ATTN: E-SWORD.NET
c/o Network Solutions
P.O. Box 447
Herndon, VA. 20172-0447
Domain Name: E-SWORD.NET
Administrative Contact, Technical Contact:
MEYERS, RICK
E-SWORD
ATTN: E-SWORD.NET
c/o Network Solutions
P.O. Box 447
Herndon, VA 20172-0447
[COLOR="Red"][B]570-708-8780[/B][/COLOR]
Record expires on 12-Feb-2011.
Record created on 12-Feb-2000.
Database last updated on 30-May-2009 08:22:19 EDT.
e-word display problem
Hello,
I wanted to communicate you only briefly, that i contacted Rick and he work on the problem with the display.
Bye,
Tom
Great new to hear Rick is working on the problem.
Hopefully we get as well an update for the pocket e-Sword (the desktop version just launched a new version recently)
A new version has been released!
It solves almost all problems, the only thing left (at least on my Raphael) is that the bible text is WAY too large, even with the smallest font size selected. I've contacted Rick about it, hopefully he'll come up with something.
Pocket e-Sword for Windows Mobile 6 (VGA only)
http://www.e-sword.net/pocketpc/downloads.html
Pocket e-Sword for Windows Mobile 6 (VGA only) (v3.1.0) 4,452kb
Updated 06-22-09
Not tested it yet as I'm at work on a Mac but hopefully all is well now!
Thanks Rick! (If you're reading this?)
Update: Having now tested it on my Touch Pro running WM6.5, I can confirm that everything that was teeny tiny, is now as it should be - top marks! That said, the text size is abnormally large... hopefully Rick gets wind of this bug and fixes soon otherwise people will be reading over my shoulder on the train - maybe that's not such a bad thing!?
New version works on Touch Pro2
Hi all
I am using the new (VGA) version on my Touch Pro2 and it seems to work well. A couple of times it's not been able to open the bible and other resources but a soft reset solves this.
Cheers
andrew-in-woking

Categories

Resources