Help! Screen wouldn't respond - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Guys, help me out!
I have a Qtek 9100 with russian OS. I changed it into English. It worked well a day and suddenly, the screen stopped responding. This morning I flashed it with the english ROM and it didn't help. Then i downloaded a Russian ROM, flashed it, again it did not help. I get stuck at the place where i should press the screen in order to calibrate it.
:?:

i solved it by myself. it turned out that it was because of the protection screen that i put yesterday :lol: i took it of and it worked. than i put it on again, and now everything works perfectly

Related

Not able to use my QTEK 9100 after upgrade

Hi ,
I have just upgraded my ROM to CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US on my QTEK9100 . The upgrade went perfectly fine for 10 min and it even copied all the cab files . But after the hard reset , my radio does not seem to work and the battery indicator displays status as unknown. When I click on start , it take long time to pop-up . Not sure what could be problem. I upgraded the ROM with CID-Unlocker option as NO . Also the active sync does not seem to work anymore now if I want to roll bak to the original ROM. Can I get some help to get my QTEK back in workig state somehow pl ? Any help is highly appreciated. Pl. let me know in detailed steps to get this thing up and running . I am using T-Mobile SIM with a plan and i am in UK.
Thanks a lot.
Superlifer
Not able to use my QTEK9100
Hi Guys,
Now my unit keeps on rebooting on itself with T-Mobile startup screen. I tried holding the camera and the recoder button while resetting, but doesn't seem to work. I am worried that my gadget might be completely unusable. Can anybody assit please asap ?
Thanks once again ..

Do I have a dead qtek 9100?

I downloaded a wm6 upgrade pack from Demonoid. The instructions told me that I needed to load an older rom on before I could CID unlock. The ROM was: CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE. The ROM that was originally on my 9100 was the lastest from Qtek. My Qtek now will not move on from the splash screen. Does this sound like I have a dead pda? Anyone have any idea how to get out of this problem. Any advice or comments would be appreciated.
Thanks
PS: I turned it off for the time being. Now I can't even turn the dam thing on!
I think I may have found a solution if I can just turn it on!! Won't charge either!
Well if u can get it turned on hold the voice and cam buttons and get it into bootloader you'll be good

HELP!!! Boot problem!

Ok, here's the thing:
Yesterday, i upgraded my Herald from WM5 to WM6. Everything worked fine, i was very happy! I discovered the 5-tab-Homescreen which i installed afterwards, and it worked. As i went to bed last night, i hadn't plugged my herald in, so he didn't charge. Now everytime i try to start the device, it crashes after the Windows Mobile 6 bootscreen! And restarts the device.
I'm really freaked right now... pls help me!
Sorry for double-post, but i really need this working before noon GMT +1
What is the WM6 ROM with you upgrated your device ?
The official or an other ?
Tfrantzis said:
Ok, here's the thing:
Yesterday, i upgraded my Herald from WM5 to WM6. Everything worked fine, i was very happy! I discovered the 5-tab-Homescreen which i installed afterwards, and it worked. As i went to bed last night, i hadn't plugged my herald in, so he didn't charge. Now everytime i try to start the device, it crashes after the Windows Mobile 6 bootscreen! And restarts the device.
I'm really freaked right now... pls help me!
Sorry for double-post, but i really need this working before noon GMT +1
Click to expand...
Click to collapse
Just flash again...
Have you tried removing your SD card when it reboots? This has happened to me too but removing it, and re-inserting it once the today screen comes up, worked.
It's not a perfect solution but it could atleast get your phone working.

[Q] Phone stuck at HTC screen

Hey guys,
I wanted to send in my device due to problems with the display.
I flashed an official rom from the HTC homepage and removed HardSPL.
I booted into the Stock rom and used it the whole day without problems.
Then I turned it off to send it to HTC to fix my issue, but had to realize that the post office is already closed. Back home I tried to turn on the device again to use it till tomorrow.
Now the phone is stuck at the green HTC letters in the beginning of bootup. In the lower left corner are some information about radio rom etc.
I tried to hardreset but it didnt help. I dont know what to do now, because I just flashed an official rom and even used it some time before the error occured.
I really hope you can help me with this problem.
best regards
Jens
P.s
sorry if my english is bad
does no one have an idea?

[Q] I can't install my original ROM anymore

It's like I wrote on the title, it started when I have tried to install Android, so I changed my mind on that dark screen (when I realized I didn't have a SD Card ), so I removed the battery and put it back to turn off my TyTN II, I tried to install my original rom (1.88.514.1 PTB) but it didn't work, after the boot screen, I get stuck on a white screen, it's weird because I can install another ROMs and it works perfectly, can anyone help me? Sorry my bad english, I'm brazilian
wesley_bebinho said:
It's like I wrote on the title, it started when I have tried to install Android, so I changed my mind on that dark screen (when I realized I didn't have a SD Card ), so I removed the battery and put it back to turn off my TyTN II, I tried to install my original rom (1.88.514.1 PTB) but it didn't work, after the tricolor screen, I get stuck on a white screen, it's weird because I can install another ROMs and it works perfectly, can anyone help me? Sorry my bad english, I'm brazilian
Click to expand...
Click to collapse
whether you have done CidUnlock and Kaiser HardSPL before flash original rom Portuguese Brazillian HTC 1.88.514.1 ??
you better learn how to successfully do it at http://forum.xda-developers.com/showthread.php?t=433835
Yes, I already did this before, should I do this again?
Edit: I did that again but it didn't work, any other suggestions? please, help me D:
Anyone? Please D:

Categories

Resources