So many new WM5 releases... Still no bluetooth fix? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

So many new WM5 releases... Still no bluetooth fix?

Hi
Unfortunately - yes.
But good guys are working on it.
It's matter of short time when Ivan's ROM will have it.

It's the only thing that keeps me staying on WM2003...[/b]

Dont count on it being fixed, not with the MS stack anyway.

lets all cross our fingers and hope that widcomm 1.7 works

i doubt there would be a fix with MS Stack, unless we can get broadcom or widcomm stack running.. then everything, including A2DP should run just fine.

I'm currently testing the broadcom/widcomm 1.71 stack, result are still inconclusive, but its better than the M$ one

Everything apart from bluetooth voicedial.......

Hi
Most of you already know this, but:
The newest relase of Ivan's ROM has the BT disconnect issue resolved permanently.
Have fun with it

Yes it is a step in right direction, but still have nasty bug with most BT Headsets, no voce in call. I am sure that mamaich ivan and Midget_1990 will find a solution for this bug soon. We will just wait and see

any progress?
I have widcomm stack 1.7 in my ipaq 6965, and I can control audio input/output over bluetooth by press of button on the headset (press and hold for 2 sec it'll trigger a redial AT command I think) but it just can't trigger an application like voicecommand in the pda. What's fustrating is that there's no documentation of widcomm sdk, so there's no way to figure out what's required in the registry (plus what dll needs to be develop) in order to handle the AT+CPR200 (I think that's the AT command for bluetooth button press) event.
If somebody has some clue or progres, please share here and hopefully more brains can be put together and fix this once and for all!

I do not know what is the problem with your ipaq, but the bt bug is fixed now, you can search the forums for it

xplode said:
I do not know what is the problem with your ipaq, but the bt bug is fixed now, you can search the forums for it
Click to expand...
Click to collapse
hi, my problem is not about auto-disconnect or no sound. everything works perfectly fine with 1.7 widcomm stack except that I can't do voice dial. specifically, I can't activate a voice cmd application with the press of bluetooth button. When I press the button, the audio streaming is turned on (and mic is working over bluetooth) but it just doesn't start the voice cmd application, which I have to manually turn it on from the pda device.
if your BA's widcomm can enable the voice dial, I would like to request if you can share your registry and the necessary dLL

we dont use widcomm anymore because someone fixed the M$ stack.

Related

Some problems

Can i get link to MMS fix and Bluetooth fix? thank you
Here they are:
http://forum.xda-developers.com/search.php
http://wiki.xda-developers.com/
still not clear
I understand u want me to read the links, i have been to those links and they do not say anything specific about how to make the bluetooth stable. Also i installed MS voice command and it give me a message to reinstall it, any ideas on this? it talks after reboot "voice command is ready", then the error pop up. Anyone experienced this yet?
BLUETOOTH HEADACHE
Hi, i aplogize if this is just another repeat, but i need help with my bluetooth, it keeps disconnecting, it unchecks itself, ad it is just unreliable. I have WM5 installed with the button fixes installed. Please if someone can direct me to the solution for a patch that makes my bluetooth reliable and stable, no more disconnecting, and also how can i route audio to the bluetooth headset, when it is on, so i can use voice command from the headset. Thank you for your help, i am a newbie, the links posted above don't take me to the solution, can i get the cab file for the stable bluetooth fix? or is there something you guys to keep it running? i have tried the checkbox and clikc on start>today, was not working
He is suggesting that you read the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_FAQ
Except from one of the wiki's
Why is it that Bluetooth disconnects after 10 minutes of turning off my device?
There is currently not a solution to use Voice Command or listen mp3 files through your Bluetooth Headset (Did not work under wm2003se either)
These are known problems. No solutions yet.
Bluetooth Headache
Well from my readings, Mamaichi and others have been extracting bluetooth stacks and having some problems, it is just that their solutions so far are spread across so many topics and boards that i am confused. i use HBH-300, could that be the problem? If bluetooth stacks can be extraced fromoter devices, can it be extracted from the razr phone and customized to fit MDAIII, cause my bluetooth on my razr phone is SOLID, no glitches what so ever. And any news on audio diversion to bluetooth?
What ???
I installed Voice Command 1.5 and it worked great with WM5. Had no problmes with VC.
downgrade
i have had WM5 for over 3weeks but it not worth it for me. I am back to 2003SE. WM5 is very unstable for me, i have all the patches and stuff, but it is slow, calls don't come in, so i will be using 2003 again. Good job to Buzz and Mamaichi and those who made WM5 possible. Is there a way to have picture caller ID with 2003SE? I had it when i first bought the system, so is there another one i can download? Thanks

Blue Angel - A2DP Bluetooth

Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.
s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!
A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?
It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.
shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...
looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!
How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!
anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.
I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...
jarekt, can you post those registryvalues please?!
Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.
BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.
I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.
Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck
BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with
i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?

ISSUE- Voice not over BT headset

Guys,
I understand you are concentrating on the WM5 upgrade and other interesting projects. Maybe, you can take a few moments out to share some of your experience with a newbie....
I am using TuMa v1.5 WM5. I am able to use BT really well (of course, the issue of BT turning off with device on stand-by remains).
I am able to connect with my TomTom and with my Cardo Scala BT headset. The problem is this: If I use the headset to initiate a call using the BT headset (by double-clicking the headset buttom to redial or by pressing the BT headset button to voice dial) the call goes through as intended BUT my voice does not go over the BT headset to the other party. Also, the voice from the other party can be heard over both, the BT headset and the phone. This problem DOES NOT appear if I make the calls using the phone with the BT headset connected to it.
Please advice. Thanks for your help and for a great forum, especuially for us newbies.
Sagar
bt headset
Select use for phone only. Perhaps then it works.
The headset is connecting to device audio, not phone audio.
sgrbhtngr said:
... I am using TuMa v1.5 WM5.
Click to expand...
Click to collapse
Really? ... Wow! I'd better update my firewall again.
How'd you steal that version off my machine! 8)
For the sake of argument, I'll presume you're using v1.4, since it has the most up to date BT elements in it, but v1.3 should be very stable for BT communications as well.
sgrbhtngr said:
I am able to use BT really well (of course, the issue of BT turning off with device on stand-by remains).
Click to expand...
Click to collapse
Yeah ... I'm still looking into this. I hope to have this working through the Microsoft Stack. The Widcomm one is still looking like a "last resort", and it really is a bit more 'ugly' to use - especially in it's compatibility and (from what I can see) reliability.
sgrbhtngr said:
I am able to connect with my TomTom and with my Cardo Scala BT headset. The problem is this: If I use the headset to initiate a call using the BT headset (by double-clicking the headset button to redial or by pressing the BT headset button to voice dial) the call goes through as intended BUT my voice does not go over the BT headset to the other party. Also, the voice from the other party can be heard over both, the BT headset and the phone. This problem DOES NOT appear if I make the calls using the phone with the BT headset connected to it.
Click to expand...
Click to collapse
Hmmm ... this sounds like there is still some form of a headset audio routing issue as vastloper indicates. Try ensuring that only one profile is active at the time (headset probably).
I will shortly have all the gear I need in order to properly test this myself too.
FYI: I've now recently purchased the following devices:
- SIRF Chipset Bluetooth GPS Unit
- Motorola HT820 Stereo Bluetooth Headphones
- Jabra BT 150 Headset
- Jabra BT 330 Headset
- BlueTrek X1 Headset
And now have access to another Jabra BT 500 Headset, and another pair of Bluetooth Stereo Headphones.
So ... shortly, I will have the ability to REALLY test everything out myself in the Bluetooth realm.
Now all I need is 5 ears, and enough pockets to carry all this stuff in.
The process I used....
Thanks, vastloper and Tuatara.
Tuatara- genius AND a sense of humor... thats a rare combo! We all appreciate your efforts in bringing WM5 to us. You go out of your way to make it better for us. Thanks.
Regarding the issue on this post, just FYI- I used MOHDWADEA's process for voice command over BT: http://forum.xda-developers.com/viewtopic.php?t=42923&highlight=
Could this cause the problem? Does this light any light-bulbs, any 'aha' moments? Please let me know- I greatly apprecaiet it.
Thanks,
Sagar
Re: The process I used....
sgrbhtngr said:
Thanks, vastloper and Tuatara.
Tuatara- genius AND a sense of humor... thats a rare combo! We all appreciate your efforts in bringing WM5 to us. You go out of your way to make it better for us. Thanks.
Click to expand...
Click to collapse
You're welcome ... remember it is a 'selfish' undertaking too. I want my phone to [email protected]$#@!#!! work for me ... but it's taking some work to get it to that point.
sgrbhtngr said:
Regarding the issue on this post, just FYI- I used MOHDWADEA's process for voice command over BT: http://forum.xda-developers.com/viewtopic.php?t=42923&highlight=
Could this cause the problem? Does this light any light-bulbs, any 'aha' moments? Please let me know- I greatly apprecaiet it.
Click to expand...
Click to collapse
It's possible. I'm not entirely certain what this will change in the configuration (or versioning of replaced DLL's), but it is possible that there are compatibilty issues. Since I don't have a device with TuMa v1.3 on it anymore (one's on Alpha v1.5 testing, and the other is a AKU2 'brick' attempt at the moment), I can't even find out for you.

BA WM5 Broadcom 1.7.1 Build 3400 Stack (Test)

BA WM5 Broadcom 1.7.1 Build 3400 Stack (Test)
This is just some test of mine to hv option with BT stack (MS/Broadcom), I only spend the last 3 hour workin on this little project, so it really possible if anything is missing or I forgotin something (its happens to me right?..lol), but I've test it and it work like it should (With My v1.3 ROM), I dont know if this test hv a bug. maybe we can test it, especially A2DP and stabilty issues with this test.
Tested operation:
1. Activesync
2. Send/Recieve File
3. Headset via computer
4. Network Access
5. BT Serial Port
6. Dial-up Networking
Known Issue:
U tell me, not tested so much.
Instalation:
1. Install the HELMI_BA_WM5_BT1.7_TEST.CAB then soft reset
Uninstall (note the step its really neccesary, or u'll endup mess with ur phone):
1. Install Enable_MS_BT_.CAB
2. Delete registry value (or the folder)
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM]
and delete "Redirect" key on:
[HKEY_LOCAL_MACHINE\ControlPanel\Bluetooth]
"Redirect"="BTConnManagerCE.exe"
3. Reset
4. Uninstall HELMI_BA_WM5_BT1.7_TEST.
5. Delete file from \Temp dir
EDIT:
I forgot to mention, after u run ENABLE_MS_BT.CAB the Broadcomm/Widcomm file will be move to \Temp folder so u can delete it safely...
Dont expect to be perfect on this release, cos its only on earlier stage, to early, hopes someone might help for improvement, and workin together with me, and I hopes some1 can make a better Install/Uninstall process.
Dont install/try if u dont know what ur doin, and backup your data is a must.
Input is always welcome. cos I believe there's still much things to do.
Thanks for http://www.aximsite.com site and everybody there for the BT file.
http://www.aximsite.com/boards/showthread.php?t=122247
and also thanks -=xXx=- for the info where to find it. thanks man.
Helmi
gonna test it now helmi_c
thanks
Just intalled. The stereo works fine! Great quality for me! The hands free seems to be a bit tempremental. Worked once and then stopped afet receiving one call.. WIll try it out again..It looks like am stuck with an either. One observation: with the ms stack, there was a headphoen icon while using the phone. is absent here...wonder if that was a ms stack function?
deepak
helmi_c,
hmm weird, after i installed the new wildcom stack, my pda cant see my headset anymore.
still testing though.
wish me luck.
imatrix
I believe u guys both hv problem with MS Stack, hopes this stack will help for who having problem with MS Stack, but remember this is just some sort test, maybe still need a lot of improvement. but its seems work good with deepakr who hv problem with MS, imatrix hopes u'll hv the same result like he does. good luck.
btw In the rar there's a BTspeed cab, it might help for some headset, post on the Axim forum sites... there's also another app for controlin power if i'm not mistaken, I'll post when i get back.
A little note, this stack sometimes wakeup if gsm signal is lost/found, if the signal of gsm is good, it shouldnt happen (theoriticaly speaking..lol..).
helmi_c
Firstly great to see BT restarting automatically after handset is switched on from standby mode. After some fooling around I was able to set up activesync and it worked like a charm (useful for me especially since USB activesync does not work)
Couple of problems I faced
1. Turning off and restarting BT gave me a unable to load driver due to insufficient memory error. When I stopped my activesync, outlook and contacts and tried again it started successfully.
2. I was unable to find the DUN service and my PC did not recognize a DUN service either - am I looking/not looking at the right place?
Thanks and highly appreciate your prolific contribution
-AKC
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
hi..
hi have instal this, and find some issues
1- if i turn on bt the wifi dont work..
2- if i turn on wifi, the bt give the memory error
afther use 1 off the things (bt our wifi) need a soft reset to work the other
Riddler said:
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
Click to expand...
Click to collapse
No, it does not work on WM2003SE, I installed it and I had to hard re-set my Imate, it works only under Wondows 2005!!
Any way I gave it a try and I had to hard reset my PDA any way!!
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
helmi_c said:
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
Click to expand...
Click to collapse
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
NO HANDSFREE PROFILE
Hi
nice integration and thanks but i went back to ms as my sony ericson hcb-700 wll not pair for some reason after looks like the handsfree profile is not working
The Audio stream is great with this BT solution !
But when I connect to my parrot ck3300 carkit, It opens the connection like there is a tel.call active. when i press the hangup button on my carkit the BT connection is gone.
So it seems it is connected as headset and not as handsfree phone,
One other thing, when I connect to my BT Sony Ericsson HbH ds970 stereo headset I cannot shut off the screen in tcpmp player ???
(I think this also happened with th MS stack)
any solution for this ?
Last test (with my clean AKU3.2 v1.3) with BroadcommPatch1 applied and no overclock:
Turn on/off 4 times and reconnect below service (get bored to turn on/off and play with it again):
currently active BT service at the same time is:
1. Activesync / Bluetooth serial Out (syncing)
2. Network Acces/ Bluetooth Networking
3. Audio Gateway / Calling my mobile operator and stream audio to my pc as headset
4. Send/Recieve file from pc and from pda
5. Bluetooth serial In
and currently active application (leave as background procces I dont close it):
1. Activesync (Syncing)
2. Calendar
3. Contact (580 contact display)
4. Excel Mobile opening 185kb file
5. Album
6. Word Mobile opening 220kb file (little bit slow on opening)
7. Powerpoint Mobile opening 350kb file till end slide
8. Notes
9. Task
10. Bluetooth Manager
11. File Explorer
12. Calculator.
lastly...activate Wifi...wifi detecting & connect to neighbor network... turn off wifi...activated again...detecting & connect to neighbor network again...
but I dont test the GPS (serial port) or A2DP stuff since i dont hv it.
turn off bt...turn on again...reconnect the above BT service...do this 4 times.. still no memory issues. well maybe I'm just bein lucky... but the battery is drain more faster with this test, maybe because this is somekind of stress testing.
so far this Broadcomm stack still running well...the sound from Audiogateway while this test active is still ok, but if the gsm signal is bad, the sound is bad also, so its not bt problem its a gsm problem. btw the ShutXP Icon on the tray is GONE..thats weird.., that the only issue I hv..
btw does anyone know where to find a PC Widcomm/Broadcomm driver that support A2DP, I dont remember where to find it. My PC Widcomm driver version is v1.4.2 Build 12, quite old, I want to test the a2dp profile.
btw if u play with:
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugin\HandsFree]
"SupportedFeatures"=dword:37 (default doesnt exist)
"ServiceMask"=dword:1
"AudioSetupDll"="\windows\HTC_PCM_Routing.dll" (default MkSpk_PCM_Routing.dll need to play with this and see what more widely support device)
"AudioPreferences"=dword:2
"AudioHandling"=dword:13 (default 8 )
there's a Icon if headset is activated. but its seems unstable in my device, try it.
bigsteve said:
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
Click to expand...
Click to collapse
Waitin for ur input...
jakubd said:
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
Click to expand...
Click to collapse
oops... well, maybe its a little bit tricky to strip out completely the old stack, but I'll try learn this... or any input is more then welcome
deepakr said:
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
Click to expand...
Click to collapse
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut.
hey helmi_c,
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut
Click to expand...
Click to collapse
yep still have the static noise, will try your method later.
been bz this few days, i did not test much. I will play around with it tomorrow.
thanks.
imatrix
Thanks Helmi, great job!
A2DP works nicely, but now i get the same opposite as compared to microsoft stack. my A2DP is perfect whereas any calls that come in ring through the hedset, but i can't pick the calls up / talk through the bluetooth headset. weird uh?
Anyone hit the same problem?
I have no problems with static, just some slowdowns due to processor usage and i can't toggle the screen in WM or using display switch.
Great Job though!
edit:
maybe its because i'm connected as both headset and high quality audio? going to try connect as hands free and HQA.
edit 2:
can't for the life of me find out how to pair it in handsfree mode! Any pointers?

Is there anybody can Change/Update BT drivers for TP2

Is there any professional Engeneer can Change/Update BT drivers for TP2 when using handset in Voice Commander?
I want to use BT earphone and hold(lone press) botton to run Voice Commander when driving.But someone said that this problem is because TP2 use this driver "Widcomm BT stack" .If we change to "MS BT stack" may fix this problem.Is that possable?.....
No, this has been discussed by some of the best ROM cooks, and it cannot be done AFAIK. The problem is that the Bluetooth chipset in the Rhodium won't work with the Microsoft Bluetooth stack unless someone can get the proper drivers, which will likely never happen. It's a shame too, many other people also dislike the Widcomm Bluetooth stack because of its poor compatibility with third party products.
Existing discussion on this is here : http://forum.xda-developers.com/showthread.php?t=558932&highlight=Bluetooth+Stack
Dave

Categories

Resources