Related
Is this ROM ever going to be leaked from microsoft (i presume this was how wm5 be started)?
Porting seems to be very unstable from what I have heard
A WM5 rom was never released by microsoft, although it was known to exist. It's highly unlikely MS will create a WM6 dev rom for the BA at all.
Remember, the BA originally shipped with WM2003SE. WM5 was a struggle to get working, WM6 should (by an unwritten law) be unable to run on the BA. But there are some gods out there so you never know.
Many drivers in WM6 are almost exactly the same as WM5 AFAIK. Drivers are normally the big problem, so if you have good drivers for the BA, then it's a possibility.... but don't hold your breath.
V
So was wm5 BA never really created by microsoft?
In that case, who did create it? Did someone do it from scratch?
If they did, why can't they do it in crossbow (wm6 Blue Angel)?
I think it's a bastard son of a Wizard leak.
V
hardingt0110 :
You still didn't read the wiki and the older threads as I told you few weeks ago
But Microsoft is the one who makes OS (WM5, WM2003SE,WM2003,...).
O2, Vodafone, T-Mobile, Cingular... are the ones who adapt WMx to devices.
WM5 for BA has been ported from different (but very similar) device that already comes with WM5 by xda-developers.
You cant buy it (WM6), even if you want So be patient
Biohead said:
A WM5 rom was never released by microsoft, although it was known to exist. It's highly unlikely MS will create a WM6 dev rom for the BA at all.
Remember, the BA originally shipped with WM2003SE. WM5 was a struggle to get working, WM6 should (by an unwritten law) be unable to run on the BA. But there are some gods out there so you never know.
Click to expand...
Click to collapse
The Roms never released for devices by microsoft, the producers use and adapt roms for him devices.
If HTC use Wm6 rom for him devices and Reproduce or advance BA to the WM6 or similar device then we can see WM6.
Other side If anybody can write or adapt device drivers that can be... Core software hasn't any driver i think. May be someone can syncronise Wm6 shell and BA (or resemble device) Wm5 drivers
And may be work
what a dream huh...
BA WM5 base rom is genuine created for BA, and just the OS (with AKU's and stuff) part was aded to this rom ported from another device.This base rom was leaked by one of the operators
I suppose that the needed kernel would be created by someone somehow someday, because basically Microsoft creates the new ROM, gives it to the manufacturers, then the manus will try to adapt the ROM to their devices.
As I saw somewhere on the net saying the ROM can be adapted and flashed to any device, as long as the manus manage to write the necessary drivers.v.v...those kinds of stuff. It sounds logical to me. What do you guys think 'bout this?
nht_max, that's what I thought as well but I never said anything, bowing to those who know more about these things. IMHO it is not needed to recompile the kernel unless it's for a new architecture. Proved the correct drivers can be located and they are compatible with WM6, then it should just work.
Recompiling may be necessary, I think because the new ROM is much different from the old WM5. Though I believe it'll be available some nice day.
Crossbow
nht_max said:
Recompiling may be necessary, I think because the new ROM is much different from the old WM5. Though I believe it'll be available some nice day.
Click to expand...
Click to collapse
You may be right about this, i have ported the OS part to BA rom without any changes in XIP section of rom (old core 5.1.195) and the device with this rom does not boot at all, so if the original core 5.2.x is ported to a BA rom it will work correctly, almost all OS files are related to the WM core, and if a function that they seek is not where it should be unpredicted crashes may occure.
But i think we should wait a lil more before try experiments like this, we have no any documentation about WM6, we don't know how the things work inside, it is similar to WM5 but defenately not the same. We must learn how it works and then port it and modify it to our own taste.
Also the leaked roms are from early beta stage, so they are not so stable and usable as the final version.We should wait a bit for the first official rom and build something stable enough from it for common usage. And i am not talking about BA here i am talking about rom cooking for all devices.
xplode said:
You may be right about this, i have ported the OS part to BA rom without any changes in XIP section of rom (old core 5.1.195) and the device with this rom does not boot at all, so if the original core 5.2.x is ported to a BA rom it will work correctly, almost all OS files are related to the WM core, and if a function that they seek is not where it should be unpredicted crashes may occure.
But i think we should wait a lil more before try experiments like this, we have no any documentation about WM6, we don't know how the things work inside, it is similar to WM5 but defenately not the same. We must learn how it works and then port it and modify it to our own taste.
Also the leaked roms are from early beta stage, so they are not so stable and usable as the final version.We should wait a bit for the first official rom and build something stable enough from it for common usage. And i am not talking about BA here i am talking about rom cooking for all devices.
Click to expand...
Click to collapse
Hi,
have u changed coredll.dll in xip boot?
the devices not boot in same mode if u try aku 3.5 and have coredll.dll of aku 3.2
@Tuatara,
please help me for relocating more space in xip boot
of course not, AKU 3.5 runs fine with the old core without problems, but for crossbow the coredll should be changed in order to work, the thing is that it is bigger than the old core.
I have no knowledge of editing XIP, thats why i am stuck at this point, but i have read here on the forums that the coredll.dll can be changed with one with the exact same size, and the crossbow one is bigger.
xplode said:
of course not, AKU 3.5 runs fine with the old core without problems, but for crossbow the coredll should be changed in order to work, the thing is that it is bigger than the old core.
I have no knowledge of editing XIP, thats why i am stuck at this point, but i have read here on the forums that the coredll.dll can be changed with one with the exact same size, and the crossbow one is bigger.
Click to expand...
Click to collapse
I have tried to run aku 3.5 with coredll.dll for aku 3.2 (not 3.3) and not working....(but perhaps I mistake method)
I know that there is a way in order to increase and relocate the files in xip with dumpromx but I do not know if it works for the modules (old post Tuatara on xda)
and however I have read that it must edit vdata and pdata in the modules for the just address (oki and sp3dev on buzzdev)
but sp3dev and oki not working on blu devices only tuatara have necessary experience on blu devices and I believe can help
xplode said:
Recompiling may be necessary, I think because the new ROM is much different from the old WM5.
Click to expand...
Click to collapse
You may be right about this, i have ported the OS part to BA rom without any changes in XIP section of rom (old core 5.1.195) and the device with this rom does not boot at all, so if the original core 5.2.x is ported to a BA rom it will work correctly, almost all OS files are related to the WM core, and if a function that they seek is not where it should be unpredicted crashes may occure.
Click to expand...
Click to collapse
I don't understand this. Recompiling is only required for a different architecture in my experience, but I've not done much with this platform myself. Is it linking in specific BA drivers or something?
Also the leaked roms are from early beta stage, so they are not so stable and usable as the final version.We should wait a bit for the first official rom and build something stable enough from it for common usage. And i am not talking about BA here i am talking about rom cooking for all devices.
Click to expand...
Click to collapse
I agree 100%, though I'm sure some of you will still tinker around. Interesting stuff.
we can use BA wm5 drivers, they should work fine, WM5 is 5.1.x and WM6 is 5.2.x not a major 6.0.x release do the changes are not so drastic and the drivers should work
look at windows windows 2000 uses the same drivers as xp, windows 2000 is NT5 xp is NT5.1
OK guys, thanks for your help.
So basically the main part of the wm5 rom for the BA was made by an unnamed operator, who decided not to release it, but it was leaked to xda-developers.
Then the developers made the aku's and customisations from scratch / ported from other devices, and combined them to make a full wm5 rom.
Some people (xplode and others) seem to think that the wm5 main part rom can be used to host all the bells and whistles from wm6.
So basically, all we need to do is wait untill an official very stable wm6 rom is made for a Blue Angel like device, port it, and we're all set!
Am I right?
Oh, and one last question: is the name for the main part of the rom a "kernel"? thanks,
Always be faithful in the xda-developers,
hardingt0110-1
Looking at other threads, some think it may be necesary to use sd cards as rom.
I have two sd cards (1gb and 2gb) which I swap between on my BA to allow me to have tomtom maps and movies on my device.
Untill now, I have ignored extrom.
Is it possible for me to install the extrom on both cards, so that I can swap them over when I want?
hardingt0110-1
Still Lurking ...
Hey There ... I thought I might just come out of the woodwork for a little bit ...
sostekit said:
have u changed coredll.dll in xip boot?
@Tuatara,
please help me for relocating more space in xip boot
Click to expand...
Click to collapse
sostekit said:
I know that there is a way in order to increase and relocate the files in xip with dumpromx but I do not know if it works for the modules (old post Tuatara on xda)
and however I have read that it must edit vdata and pdata in the modules for the just address (oki and sp3dev on buzzdev)
but sp3dev and oki not working on blu devices only tuatara have necessary experience on blu devices and I believe can help
Click to expand...
Click to collapse
I've been quite able to make some space in the XIP section by moving files around (to make space for larger boot registries, etc.), but I haven't had any luck with moving around modules. I think it was mamaich (and/or bepe) who managed to get the new core.dll (which has the new LASS_xxx entry points) into the BA XIP section ... but I haven't had the time to see how they managed it.
I do have the source for RomMaster & dumprom, and will be going through the details at some point - when I have the time (which is always lacking). In the same way as figuring out the Acer ROM for mamaich's tools - I'll need to see if we can dump out and 'move' modules & files around to make the space required. This may just have to be a 'one off' manual hex editing job though (fixing the tables).
While in theory the WM5 drivers should work just fine, a number of our "WM5" drivers are still 2003SE versions. How long we can keep using the old drivers is anyone's guess.
In short - as long as the XIP section contains all of the entry points and support calls required by the 'new' OS, and can start the "new" OS, then the OS portion of the ROM can be replaced. This is what we are doing with the BA now. The XIP section is still (effectively) the original leaked WM5 build, with very little, and as little replaced as possible, but just enough in order to boot the "new" OS, which has been put in the remainder of the ROM.
For reference, you can find a listing of the new functions in core.dll from here:
http://blogs.msdn.com/windowsmobiledocs/
As far as I know (from xda-dev & runour mill) the core.dll entry points have not changed between versions wm5/6 ... but that's not to say that some things don't operate differently.
Only time will tell if we can port/hack wm6 on to a Blue Angel.
As I understand "Also the Breeze Hardware shares most of the Parts with the Hermes" is it possible to convert it's WM 6 for Breeze?
(sorry for my bad English)
Probably it is, need to look into it. at first we need to crack spl to avoid nbh check
hi,
maybe hard spl v7 works...
i have experimented today... but i need my phone, because of that i finaly didn't click on the "flash now" button
Hermes is a PocketPC and Breeze is a Smartphone...
Both WM5 and WM6 have separate OS editions for PocketPC and Smartphone. If I were you, I wouldn't try to force "WM6 Professional" (Pocket PC) for Hermes on a Breeze (Smartphone - "WM6 Standard").
So, you need to decompress the xip segment and get a memory map of breeze. if memory addresses are the same as hermes, you need to replace a coredll.dll in second xip segment and you need to build imgfs using wm6 os from excalibur/vox and breeze wm5 drivers and applications. to load this into the phone, you need to avoid nbh check
how can we decompress the xip segment ???
what is exactly the coredll.dll ???
HI,
today i have played a little bit with bootloader...
task 32 says FF ... so its definitly not supercided... but i don't really know why a few other persons here can flash a dopod rom.. maybe they are all the same cid ??
also i'm searching for a usb sniffer ... have found a few in the web but all costs money and noone had give me understandable commands while using the romupdate tool from the actuell htc rom...
ok found some other interresting info..
the RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP ROm has a QTEK_Z12 CID ....
but we all can update it to breeze device...
quite interesseting is also that:
Cmd>info 2
HTCSQTEK_Z12Û.oÂHTCE
... as we can see i my HTC Device has a QTEK_Z12 CID ... maybe someone can check what CIDS und the Breeze's out there...
Hi, could you explain how have the CID of the phone. Because i tried with info2 but it didn't work. Thanks. ++
----------------------------
just go in bootloader:
turn off device and restart it with hold cam button...
attach usb cabel the serial line on the 3color screen should change to usb...
also you have to deactivate the activesync usb connection...
then start the mtty app choose the usb connection...
then youll see the cmd> line... after this enter info 2 ... and you should become a output like mine...
------------------------
what ipl/spl version's are shown on the 3 color screen ??
i read that HTC announced S730 (wings)
it is like s710 but with MTeoR's hardware and WM6
I hope that it is possible use s730 ROM to take WM6 for MTeoR
So we need wait for s730 i think
I hope that i can see WM6 on my MTeoR :-[
concerning to his thread: http://forum.xda-developers.com/showpost.php?p=1257924&postcount=10
i say it a second time now...
we need the excalibur wm6 rom
why...
simply ... the excalibur has likley the same hardware as breeze !!!
all other devices are based on the hardware like wizard... (200mhz cpu etc.)
I'm just working on all the needs...
cookin with wm5 works!! i had cooked a German only version from the actuell rom! with a few tools on it...
also cooked an costumized bootscreen:
also there has to be somewhere in rom a "Shutdown" Screen.. i flashed the 2 Bootscreens and when shutting down the phone theres the old htc screen...
excalibur (s620) based on Tornado. So it have OMAP chipset, other radio w/o 3G etc.
at this time there is no MTeoR's based smartphones on the market as I know. Announcement only (Wings/Erato/"excalibur replace")
... damn ... what t.. f...
i searched a few days a ago and i had a website where the info was that excalibur is like the mteor...
....
ok so far i can see the next mteor hardware like phone should be the s730 (Wings)....
sorry that was my fault...
...
ok maybe i tought that excalibur was the right because this is the only one where i can find a wm6 rom for download... on all others there are no shipped roms available??
hmm
Hi,
ok just played a little bit with the excalibur rom...
the mainproblem is that i cant extract the files out of the nbh file...
because of that i can't modifiy a hermes rom...
i will look forward and hope to find an solution for it...
ok...
extraced excalibur rom...
cooked a bit...
but no working rom yet!!
also have flashed a wm6 hermes rom with a few files modified to breeze...
device didn't boot on bootscreens...
when flashing an unmodified excalibur rom, breeze directly goes to bootloader ....
next thing i want to try is to use the original 1,34.251.1 Rom ...
wow... I hope you manage to get a working WM6 rom for the MteoR...
Hi guys!
i have cooked today the wm6 rom with base wm5 ... but windows did not start up after 2nd boot screen!
i think that all goes to hard work ....
if anyone knows what the real core file of winmobile are then please post it!!
futureshock said:
Hi guys!
i have cooked today the wm6 rom with base wm5 ... but windows did not start up after 2nd boot screen!
i think that all goes to hard work ....
if anyone knows what the real core file of winmobile are then please post it!!
Click to expand...
Click to collapse
No, it`s not the way. Just contact me via ICQ and we`ll work. but now no time for that
HI, first sorry ofr my englis, i am from argentina, and i have a t-mobile SDA and i need know if with programs i can make a wm6 rom or if i can custimize the wm5 rom por my tornado. thank
Hello all
Wm6.1 alpha 1 Ver.5.2.1711 (Build 19202.1.0.0)
Many bugs (high instability)
WM6.1 alpha 2 Ver.5.2.1711 (Build 19202.1.0.0)
Many Bugfixes (Usable)
Accesibility-working
Comm manager-working
T9-working
Power-NOT WORKING (you have to regedit)
WM6.1 alpha 3 Ver.5.2.1711 (Build 19202.1.0.0)
Many Bugfixes (Very Usable)
Accesibility-working
Comm manager-working (without bluetooth) - fix in progress (A4)
Bluetooth working - separate menu
ad2p fixed - proper version
T9-working
Power-working
Suspend -working
XIP - Rebuilded
Caller ID -working
HSPDA-working
GPRS-working
GPS-working (external device)
MMS - working
2 beam in control pannel !!!! - fix in progress (A4)
Please test and tell me if is anything wrong and if you find fixes
WM6.1 Beta 1 Ver.5.2.1711 (Build 19202.1.0.0)
Many Bugfixes
Accesibility-working
Comm manager-working (COLOR with BLUETOOTH)
Bluetooth working - separate menu
ad2p fixed - proper version
About - FIXED
T9 - working
Power - FIXED
Suspend - working
XIP - Rebuilded
Caller ID - working
HSPDA - working
GPRS - working
GPS - working (external device)
MMS - working
2 beam - FIXED
Windows Live - FIXED
you must update Windows Live to latest version
http://rapidshare.com/files/106073863/Windows_Live_10.6.34.2500.cab.html
ROM Links
http://rapidshare.com/files/105874292/MTeoR_-_WM6.1_-_A3.rar.html
http://rapidshare.com/files/106079473/MTeoR_-_WM6.1_-_B1_-_ok.rar.html
Please test and tell me if is anything wrong and if you find fixes
Also released the A4 kitchen
Many thanks to
Bepe - Tools
Mamaich - Tools
Dr Martin Gonzo - support
Garmin - support
futureshock - Test and bugreport
Hi, from where comes the Wm6.1 Roms?!
when you give it me i will try to made other languages too of it
jerpelea said:
Hello all
This is the alpha version of wm6.1
Please test and tell me if is anything wrong and if you find fixes
http://rapidshare.de/files/39013516/MTeoR_-_Splash_Screen.rar.html
http://rapidshare.com/files/98157272/WM6.1_Segoe.cab
http://rapidshare.com/files/104652554/MTeoR_-_WM6.1_-_A1_-_ok.rar.html
tomorow i will release the rom kitchen
and vanilla wm6 & wm6.1 roms
Many thanks to
Bepe
Mamaich
Dr Martin Gonzo
Garmin
for their tools and suport
Click to expand...
Click to collapse
how cook chines ROM?
good job! thanks very much!
Wow Cooooool man good job thanks
hello,jerpelea !
I find this rom in "seting", "Power Management","Accessibility" is bad."regional settings" locale is russian,and lose "systerminfo"
my english is poor,wish you can understand.
Hello lyf1998
fixed accesibility
working on power settings
i know that locale is in rus (is normal)
Where did you find sistem information ?(it is not included in this rom)
I will not cook chinese rom
please learn english, read forum and learn gow to cook or add locales.
I will release the Kitchen so that you could cook yorself an rom
Thanks
jerpelea said:
I will release the Kitchen so that you could cook yorself an rom......
Click to expand...
Click to collapse
Thanks.
呵呵，谢谢。
released
till monday i will release an A3 version
jerpelea is KING!
Hey jerpelea. Thanks so much for getting this out, I loaded it up as soon as I got home Friday night. Observations so far:-
Pros:-
-Very fast loading, much faster than latest WM6.0 out for Mteor
-Very fast running, including loading apps.
-Visually, complete makeover. Much happier with this Today screen than any plugin I've seen.
-All software attempted to far works fine- Route66, Google Maps, Skype (as well as it does on the mteor anyway!).
Issues:-
-msn messenger not installed, however Today screen expects that it is there. When selecting to sign in from Today screen, it comes up with a connectivity issue immediately, however no connectivity issue exists. I can install WLM seperately, but would be ideal to have the sign in from the Today screen as intended. Also when I've installed the latest WLM, there is a strange issue where I cannot do backspace- the 'back' key does not delete text and move the cursor backwards. Makes MSN virtually unuseable for me.
-Phone intermittently does not resume from standby- is frozen. It is still flashing to say that it's on and connected, however no buttons will revive it- the only way to revive is to remove battery and reboot. When phone restarts new messages and emails come in- leads me to believe phone was frozen.
-Phone intermittently wakes up for no reason- have had the phone sitting next to me for a night, and it lights up brightly at random intervals.
I am blown away with this release- it's made my Dopod 595 my favourite phone to carry again, over my Hermes and Asus Halley. A few issues to be resolved obviously, but it's exciting that we're getting such recent builds of WM6 for our Mteor's.
Keep up the great work, holding my breath for the A3 release!!!
does it work with dopod 595 variants with forward facing camera? and also, can you please point us to SuperCID unlock guide? thanks
Dopod 595 & WM6.1 A2
alexnvidia said:
does it work with dopod 595 variants with forward facing camera? and also, can you please point us to SuperCID unlock guide? thanks
Click to expand...
Click to collapse
It sure does work with the 595, albeit with the issues mentioned in my previous post. I'm honestly not sure about the front-facing camera, hadn't tried it yet. Will try tonight and advise.
In terms of getting around the CID issues, there will be 3 registry edits you will need to make (need to copy regedit to phone and run to make changes), and also a piece of software to application unlock. This will make your phone Application Unlocked.
You then put Des' SSPL on the phone, run it and immediately press the power and camera buttons. It will then start with the special SSPL, which gets you around the CID locking. You can in theory update via the update software (RUU) after this, however I have always upgraded via putting the rom onto the memory card as "BREEIMG.NBH". There is packaging software that will allow you to put your own choice of radio, rom, splash-screen's etc together.
In terms of the SSPL process, this is very well documented on the forum. Just take a look. I would not attempt the SuperCID process suggested- which involves loading the Hermes unlock tool to the phone. The hardware may be the same, however the command to enter the bootloader is not, I have bricked my Dopod 595 TWICE doing this- both times having the board replaced (under warranty luckily!). Up to you to attempt if you like- however I just don't see that it's really worth it until there is a dedicated and foolproof process.
Remember that these rom upgrades don't include the radio upgrade- so if you are upgrading your firmware for the first time, best to flash the most recent HTC WM5 upgrade first (incl. radio 1.38.x). Or an extracted Hermes radio rom. Just ensure it includes HSPDA.
If it's your first upgrade, and you don't like the idea of upgrading many times, I'd perhaps wait until a more final WM6.1 for Mteor is released (perhaps A3 or a RC).
I'm far from an expert, but have played with these, and my Hermes a lot. If I can perhaps answer anything else, please let me know...
MMS
jerpelea can u add MMS program to your A3 release???
stuartmclean said:
It sure does work with the 595, albeit with the issues mentioned in my previous post. I'm honestly not sure about the front-facing camera, hadn't tried it yet. Will try tonight and advise.
In terms of getting around the CID issues, there will be 3 registry edits you will need to make (need to copy regedit to phone and run to make changes), and also a piece of software to application unlock. This will make your phone Application Unlocked.
You then put Des' SSPL on the phone, run it and immediately press the power and camera buttons. It will then start with the special SSPL, which gets you around the CID locking. You can in theory update via the update software (RUU) after this, however I have always upgraded via putting the rom onto the memory card as "BREEIMG.NBH". There is packaging software that will allow you to put your own choice of radio, rom, splash-screen's etc together.
In terms of the SSPL process, this is very well documented on the forum. Just take a look. I would not attempt the SuperCID process suggested- which involves loading the Hermes unlock tool to the phone. The hardware may be the same, however the command to enter the bootloader is not, I have bricked my Dopod 595 TWICE doing this- both times having the board replaced (under warranty luckily!). Up to you to attempt if you like- however I just don't see that it's really worth it until there is a dedicated and foolproof process.
Remember that these rom upgrades don't include the radio upgrade- so if you are upgrading your firmware for the first time, best to flash the most recent HTC WM5 upgrade first (incl. radio 1.38.x). Or an extracted Hermes radio rom. Just ensure it includes HSPDA.
If it's your first upgrade, and you don't like the idea of upgrading many times, I'd perhaps wait until a more final WM6.1 for Mteor is released (perhaps A3 or a RC).
I'm far from an expert, but have played with these, and my Hermes a lot. If I can perhaps answer anything else, please let me know...
Click to expand...
Click to collapse
you sound pretty much like a guru here.. it will be very helpful if you can provide the links to the documentation of the CID, SSPL, ROM, or anything relevant here. i know i can do a search, but my 595 is out of warranty and it wouldnt want to risk killing the phone with the wrong process or procedure.. unlike the startrek thread, the superCID and unlocking process are well pointed(links) and explained in the ROM update packages. i find that Breeze's threads are a bit fragmented here..
so if it's not too much of trouble, maybe you can start a new thread explaining the unlocking, CID, SSPL, and Radio upgrades in detail. im sure the admin will make this useful thread sticky for nobs (like me). cheers.
have you looked into wiki?! there are many infos...
CID Unlocking isnt researched sofar that you can use it without starting the sspl from a running device... so that means theres no HARD SSPL yet...
and i think there would never be..
i have tested to flash devs sspl but it didn't worked...
i'm also on the side that the mteor is a smartphone thats not really widly in use... so theres no big community behind they develope!
DEv has done so much with his sspl...
and with wm6 and wm6.1 yet i think thats much more i have ever imaginaryed!
thank you again! but i still do not run rom Kitchen.
is it possible to put in the neo-plugin today app from the mteor wm6.0 roms?
lyf1998 said:
thank you again! but i still do not run rom Kitchen.
Click to expand...
Click to collapse
cant help
i have
.net 2.0
.net 3.5
visual c redistributable
windows XP sp2
Does not work on vista
BR
Hmm....
was what I got trying to upgrade...
techdev said:
is it possible to put in the neo-plugin today app from the mteor wm6.0 roms?
Click to expand...
Click to collapse
Yes but NO i will not include it
You have the kitchen you can include it if you like
This is a vanilla version
I will try to clean it of bugs
Everybody who wants an localisation or an software will have to add it
BR
Hi Guys,
I am in a serious fix ! I downloaded WM 6.5 ROM from this site about 3 months ago & installed it on my HTC TYTN II. It worked like a charm...until this Morning. It now says " This concludes the beta test of this software release." etc....I can't connect to my phone via USB thus I can't reload any Software onto it. I tried to Hard Reset...but the phone just restarts & goes back to this message...Is there any way of getting a ROM installed on this phone ? Any help will be greatly appreciated !
Durandt said:
Hi Guys,
I am in a serious fix ! I downloaded WM 6.5 ROM from this site about 3 months ago & installed it on my HTC TYTN II. It worked like a charm...until this Morning. It now says " This concludes the beta test of this software release." etc....I can't connect to my phone via USB thus I can't reload any Software onto it. I tried to Hard Reset...but the phone just restarts & goes back to this message...Is there any way of getting a ROM installed on this phone ? Any help will be greatly appreciated !
Click to expand...
Click to collapse
Try this Sir,
Make sure You have full battery capacity,
Press and hold camera button then connect Your Kaiser to PC,
It should bring You to bootloader then just flash it with any ROM,
Finish
Durandt said:
Hi Guys,
I am in a serious fix ! I downloaded WM 6.5 ROM from this site about 3 months ago & installed it on my HTC TYTN II. It worked like a charm...until this Morning. It now says " This concludes the beta test of this software release." etc....I can't connect to my phone via USB thus I can't reload any Software onto it. I tried to Hard Reset...but the phone just restarts & goes back to this message...Is there any way of getting a ROM installed on this phone ? Any help will be greatly appreciated !
Click to expand...
Click to collapse
I have same problem... ActiveSync doesn't work anymore so I can't get contacts and everything from phone... tpoday I will flash it with original HTC rom which work as must...
erwinpiero said:
Try this Sir,
Make sure You have full battery capacity,
Press and hold camera button then connect Your Kaiser to PC,
It should bring You to bootloader then just flash it with any ROM,
Finish
Click to expand...
Click to collapse
Or make hard reset and then flash it with other rom... For me work...
erwinpiero said:
Try this Sir,
Make sure You have full battery capacity,
Press and hold camera button then connect Your Kaiser to PC,
It should bring You to bootloader then just flash it with any ROM,
Finish
Click to expand...
Click to collapse
My Friend...You are a Star ! Thank You very much ! It worked like a bomb !
Glad to hear it Sir
Which ROMs are affected by this specifically? Anyone knows that?
Balrog82 said:
Which ROMs are affected by this specifically? Anyone knows that?
Click to expand...
Click to collapse
I don't remember name of ROM but I know when booting show some scary head and label with WM6.5. It have Titanium "home" plugin...
_Dejan_ said:
I don't remember name of ROM but I know when booting show some scary head and label with WM6.5. It have Titanium "home" plugin...
Click to expand...
Click to collapse
As i remember there are some ROMs with scary splashscreen, Josh and Anryll ROMs, but which version?
erwinpiero said:
As i remember there are some ROMs with scary splashscreen, Josh and Anryll ROMs, but which version?
Click to expand...
Click to collapse
Im 70% that has been ROM builded by anryl's from THIS thread.
Which build? I don't remember...
I know that have:
-3 columns start meni
-without calculator
-Titanium "home plugin"
-iContacts
yeah it happened to me too I was using Anryl's 21500 rev5 wm6.5 rom
rant start
then I attempted to load TCPV6FULL wm 6.5 rom and it installed but will not even boot into the OS...such a pice of crap and this is the second crappy ROM I tried from that guy after 3 wm devices and no REAL improvements from M$...I think I'm going to go get a Palm Pre or Android Phone
rant over
ljinsane said:
yeah it happened to me too I was using Anryl's 21500 rev5 wm6.5 rom
rant start
then I attempted to load TCPV6FULL wm 6.5 rom and it installed but will not even boot into the OS...such a pice of crap and this is the second crappy ROM I tried from that guy after 3 wm devices and no REAL improvements from M$...I think I'm going to go get a Palm Pre or Android Phone
rant over
Click to expand...
Click to collapse
Dude, seriously? I've heard nothing but complaints about Android. Only issue with TPCV6 I know of is quickGPS. Other than that it is fast, responsive, and loaded with some pretty good apps and customizations. V5.1 has no issues. Maybe you got a bad download, or forgot to flash a stock rom first, but his work is pretty good.
I'm using Anryl's Build 21501 6.5 with no problems. no time bomb as of yet, and if it does, oh well. I save all contacts to my SIM & don't save messages so it's no big deal. My room mate has a G1 and what does it do? It sits in his desk draw as he uses his new LG Incite WM cell (His Kaiser needs a new screen again).
Note to self, don't put your Kaiser in the same pocket as your wallet with metal buttons on it unless you want a cracked screen lol...
I have the same problem with o2 xda trion... please help me.
worried
i have a AthineOS WWE 6.5 rom. Is 6.5 on beta test generally? Will all 6.5 roms expire after some time? would be helpful if someone could clarify as i also had no idea about this.
You have to use an NTBC ROM to be free of this kind of probs.
NTBC unofficially stands for No Time Bomb Certified.
The new ervius style kitchen checks it auto. on build ROM, but old style kitchen maybe doesn't. I would recommend asking your preferred cooker to upgrade to ervius new style kitchen, in order to produce free NTBC ROMs
Passing manually in bootloader mode then plug in PC you don't need ActiveSync you can flash a new ROM directly. Hoper that helps,
brds
nar
help to upgrade to wm6.5
drkfngthdragnlrd said:
I'm using Anryl's Build 21501 6.5 with no problems. no time bomb as of yet, and if it does, oh well. I save all contacts to my SIM & don't save messages so it's no big deal. My room mate has a G1 and what does it do? It sits in his desk draw as he uses his new LG Incite WM cell (His Kaiser needs a new screen again).
Note to self, don't put your Kaiser in the same pocket as your wallet with metal buttons on it unless you want a cracked screen lol...
Click to expand...
Click to collapse
I just can't upgrade my htc8925 from wm6.1 to 6.5..
i tried a lot of stuff and i'm stuck and i'm asking for help (i have a paypal account if that helps.. )
if I reset my mobile holding the camera button i see the 3 colors properly with this info:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
not sure if that is correct or not.
my model is kais100 htc8925
image version: dcsv1.3-wm6.1
any step by step will be very apreciated !
nevaska said:
I just can't upgrade my htc8925 from wm6.1 to 6.5..
i tried a lot of stuff and i'm stuck and i'm asking for help (i have a paypal account if that helps.. )
if I reset my mobile holding the camera button i see the 3 colors properly with this info:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
not sure if that is correct or not.
my model is kais100 htc8925
image version: dcsv1.3-wm6.1
any step by step will be very apreciated !
Click to expand...
Click to collapse
Start here:
http://forum.xda-developers.com/showthread.php?t=433835
Here's the release of my 6.5 23001 ROM it's Fast and staible,
I'd like to say Thanks to all the people that have given there tools and shared there work on this site like Bepe,Itsme,Explode,SunDream,Da_G and Many more how's names I'v missed
Explode for his help over the last 2 year's or so, Thanks mate
Thanks Guy's you all Rock
If you change the descktop theme do a soft reset and then your dialer will match your desktop
Change Log
build v1.01 ------ had camera bug fixed in v1.20
build v1.20 ------ New start menu layout, and some small tweeks
build v1.20 32MB RamDisk
Download v1.20_Rom
http://www.4shared.com/file/119359561/8e4616b1/Swampy395_Hima_23001_5_0_60_v1_20.html
If you want Titanium Weather go here http://forum.xda-developers.com/showthread.php?t=487090
and get Showaco-Titanium-Weather-QVGA-by-Mnemonique-v3e-M2D-Icons.cab
MMS install the 2 cab's then run networkwizard from settings\connections
enjoy best regards
swampy395
Hi swampy,
Sounds interesting, I'll flashing it, to try.
EDIT
Camera is not working on this?
download and install a good job
Thank very much for your hard work.
Will give it a go
Thank you swampy =)
Already downloaded the file and flashed it to my fon. Flashing time is reduced from 30-40 minutes to just 13 minutes. Its fast and stable. Been using it now, i'll observe it and report any bugs i may encounter.
WOW, good work!!
Really fast and stable, faster than 21232 (I think) Really great work!
new build
Hi guys an gals
New v1.20 5.2.23001 see post (1)
Beta removed it seems staible
regards
swampy395
Flashing now. Really well done, swampy395.
Edit: Video mode fails - Camera is working
I like the new edited start menu, most.
:d 漂亮
Thank you for your 23001!
But the line download can not do for me,can you take it in "brsbox.com",thank you very much!
Req. Kindly please help me
Sir Swampy,
Please kindly help me...can you cooked with your rom with this app Extendir v.103, I greatly appreciate your rom when I flash it with my xda 2 it was fast and stable thats why I wanted to try to cooked with extendir...please help me
This is the post:
http://forum.xda-developers.com/showthread.php?t=530710
macleo said:
Sir Swampy,
Please kindly help me...can you cooked with your rom with this app Extendir v.103, I greatly appreciate your rom when I flash it with my xda 2 it was fast and stable thats why I wanted to try to cooked with extendir...please help me
This is the post:
http://forum.xda-developers.com/showthread.php?t=530710
Click to expand...
Click to collapse
Hi mate
sorry but from what i read about this app you have to have wince_nls in the XIP and there's not enougth space in XIP, so It's a none starter
there's so little space left in the rom now with 6.5 that were gona need to find some other way to do things, we may make it to the end of 6.5 there's a small cab with my rom and that don't fit in the rom that's Y it's in the cab
but wm7 needs hardware we don't have in our devices
regards
swampy395
very nice and fast ROM, thank you
but I am having problem with external bluetooth GPS module. I turn ON bluetooth on the device and the module. Then pair it and select to use "Serial Port". But the device is listed as Disconnected and when I try to connect, it says: "Your device did not connect with GW-GPS-005. The connection failed or the passcode is incorrect."
Passcode is correct and in WM5, 6.1 and some beta 6.5 it worked just fine
edit: same problem when connecting to Nokia 6260. Will try flashing some WM6 ROM to be sure the BT on Himalaya is working(worked last week, but to be sure)
edit 2: so the BT is working, but every 6.5 ROM I tried can't connect to anything... can someone please test if their bluetooth is working? please please
Hi mate, once again thank you for this update. Great job my friend ! ! !
Flashing again finished in just 13 minutes, start menu folders multimedia, accessories and communication now been updated. And flashing with this rom did not made any changes to the installed programs in my previous rom specially contact numbers,titanium theme and other components except for time settings, ringtone and task bar icons which have to reset or reinstalled. Noted speed and stability is still present. Is this related to flashing rom without losing data thread in development and hacking section? just curious
wow!
wow! another wm6.5 rom!
hi,
how can i do a german version of this? ive got this mui files from efsane http://ahorn.todesmut.org/wm6.5_0407_mui_ctrlpda.zip (pw: ctrlpda) for german language. can i use the kitchen by sun_dream or do i need another kitchen?
MK[PCTF] said:
very nice and fast ROM, thank you
but I am having problem with external bluetooth GPS module. I turn ON bluetooth on the device and the module. Then pair it and select to use "Serial Port". But the device is listed as Disconnected and when I try to connect, it says: "Your device did not connect with GW-GPS-005. The connection failed or the passcode is incorrect."
Passcode is correct and in WM5, 6.1 and some beta 6.5 it worked just fine
edit: same problem when connecting to Nokia 6260. Will try flashing some WM6 ROM to be sure the BT on Himalaya is working(worked last week, but to be sure)
edit 2: so the BT is working, but every 6.5 ROM I tried can't connect to anything... can someone please test if their bluetooth is working? please please
Click to expand...
Click to collapse
Hi mate
Over the last 2 years or so I'v had with many rom this sort of probs with GPS devices in 6.1 and more so in 6.5 ROM's
1) work round is to pair some other device/s IE: PC, Headset, or some other phone ETC. then pair GPS, It will then have to use a different port/dma/irq etc..
Over on Blue Angel forum "GloomyBoy" did a tutorial on fixing some probs with 6.5 an GPS it's worth a look
I'v just paired my bt_gps ok, It's unbranded don't know it's make got it with hima 4 years ago
Please let me know how you get on and ill see if its something that can be builtin
regards
swampy395
japo_g said:
Hi mate, once again thank you for this update. Great job my friend ! ! !
Flashing again finished in just 13 minutes, start menu folders multimedia, accessories and communication now been updated. And flashing with this rom did not made any changes to the installed programs in my previous rom specially contact numbers,titanium theme and other components except for time settings, ringtone and task bar icons which have to reset or reinstalled. Noted speed and stability is still present. Is this related to flashing rom without losing data thread in development and hacking section? just curious
Click to expand...
Click to collapse
most times if you had programs installed to ramdisk then there still there after a reflash but not every time if new rom ramdisk size not same as last then it will be lost for sure,
P.S. after you flashed the ROM in the upgrade folder there's a file RUULog.log can you past it's contents or zip it here so i can see, Y your flash time is so short as it's 40 mins with my dual core 2gHz laptop
regards
swampy395
ahorn said:
hi,
how can i do a german version of this? ive got this mui files from efsane http://ahorn.todesmut.org/wm6.5_0407_mui_ctrlpda.zip (pw: ctrlpda) for german language. can i use the kitchen by sun_dream or do i need another kitchen?
Click to expand...
Click to collapse
Hi mate
sorry i tryed porting to another language once before and didn't manage it,
i'v seen a tutorial, I think in hima forum how to doit but, you'll have to search it out and try it,
Note when building for any other language than "WWE" there are more file and there larger too, Space is in short supply
not saying it can't be done but it will be hard good luck
regards
swampy395
Thanks very much for reply!
I looked over at the Blue Angel forum and the tutorial is basicaly the same I did every time when pairing my Hima with the GPS on WM5, 6 or 6.1 but is not working on 6.5(for me) because the dang thing is somehow unable to connect.
So I tried to pair something else. Headset is working fine and other phones not.
But this is no issue with your ROM, my Hima can't connect to anything on any 6.5 ROM as I found out. The only option for me is to flash 6.1 ROM and live with it, because I use the phone only as a GPS navigation
Still, thanks for your time, your ROM is realy nice, fast and all