Database Develop

Admin Reset Code

hi there,
I want to do an admin master reset on my phone and i have been told that i need an admin code to do it with.
The reason that i want to do this is because my phone is very slow and still as the O2 software on it eventhough i have deleted the relevant files as mentioned in this forum.
Could anyone help me please
Thankyou

I think you just need to hard reset it? There's an app called ClearStorage on your phone, or alternatively there's a key press combination I don't know on the wizard, or you can use my app called VJEschaton. But Clearstorage should do the trick.
But be careful - it will wipe EVERYTHING off your phone. Backup your contacts etc first.
V

flash to new helmi rom from WM5 incomplete

I will probably deserve a flaming for these questions but i have searched and have read the wiki as completely as i can.(i have reading large amounts of info problems)
trying to upgrade my original BA wm2003 (upgraded to WM5 from this website months ago) to the latest helmi rom.
i have lost my original device data note i was sure i backed up.
1. cannot understand the proceedure for changing the operator info from command window with setoperator??
2. seems to be a program left out cusTSK it wont transfer the normal way and says beacause it is read only **edit now ok because i copied directly to SD card using card reader.**
3. i have tried to put the device into bootloader screen but then activesync is not active and i get a connection error.
4. when i try to flash with BAupgrade i get a error 100: model ID error but i cant find any descriptions of what to do next on google or these forums.
i have read the readme's several times and i just cant see where im going wrong.
this is about the 5th hour of trying and i think my head is going to explode.
so if you have time to explain/flame(dont hold back either) me where im going wrong, i will be very grateful.

How to set operator - revised edition (by me )
http://forum.xda-developers.com/showthread.php?t=291426

ok thanks for that.
i am assuming this is a nesscessary proceedure to complete or the upgrade wont work at all?
and it doesnt make sense but i need to know,
if the device came as a MDAIII from T mobile i need to set the operator to the t-mobile code?
or
now i previously unlocked the PDA to any network but i use orange, i need to set it to the orange operator code?

ok i have flashed the rom ok please no need to post solution.

T-MOBILE MDA III - Qtek 9090 please help (I from CZECH REPUBLIC)

Hi I from CZ and I have problem with my MDA III
what can I do ? please
"bootloader doesn't work and master reset too doesn't work" please help i dont know how to flash i was read much tutorials there but I not found a right tutorial please help me I dont know what i can do I form CZ and my mail is [email protected] ( kdyby nekdo z CR na to narazil tak mi prosim napiste a domluvime se na icq treba klidne kdybych to rozjel tak poslu i nejake penize nebo tak akorat mi prosim napiste co nejdriv ve stredu jdu jinak do servisu ale tam to bude stat hodne ) (this is PH20B

actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum

Chef_Tony said:
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Click to expand...
Click to collapse
I want go to bootloader menu but is dont work I press Power +record+softt reset with stylus but it doesnot work and when I conect MDA with cabel to COM this cable in not USB and active sync not found MDA and when I start update with exe it write me not found (sorry for my english) help me please ? can you write me more detailed tutorial what can I do for flash please what I must download and what I must do anywhere dont work download and i dont know where I can download any files
EDIT : Flashing is not compatible with serial cable ? I have this cable
Code:
http://www.i-obchod.cz/product.asp?productid=6663
this is to serial port (COM) when i buy this
Code:
http://www.easydevices.co.uk/pp/PDA_Accessories/Cradles/QTEK_9090_USB_SYNC_CRADLE.html
work it with this ? or it better when I go to service and pay 800kč this is about 25 Euro or 40 dollars and when I place an order this cradle i pay for this 18£ this is about 600kč and about 7days when it send me to home and I go to service tomorow but if I Flash it I not having to go to service

hi guys!
my ba also displays this strange message after an unsuccessed update (disconnected before finished). i have tried to install the update once more but it says: error 101: connection error. because i own my ba just since 20 hours, i don't know what to do now. so maybe someone could translate it into newbie-language. one more thing: unfortunately i use vista.
thanks for your help!

tried it once more with the new windows mobile device manager but my pc does not find my ba. vista just plays a sound when i put it on the cradle. i think you are the only ones in the hole www who can help me. need your help!

use maupgradeut_noid for upgrade
both of you read wiki there are solutions to your problems

maupgradeut_noid tells me this:
don't think that it is right.

hi folks!
i have tried it a hundred times with my vista mashine and a couple of times with xp on virtualbox but nothing. 15 minutes ago i have turned on my old xp mashine, downloaded the ROM from tmobile germany and started the application. it worked for me without maupgradeut_noid. only the original rom and nothing else. so my tip: don't waste your time with vista! xp is much better for solving this problem. thanks xp!

ok, but as i see it you didn't solve a problem but avoided it, and not even in the best way. i use vista too and i am unable to re-flash my device. the general problem is that the identifier of the device change over the flashing process, so vista downloads new drivers and cuts the connection. as i understand it, there is hardly any way to avoid that.
of course you do't need to use maupgrade_noid for an original rom, the _noid file is, as implied by the name, to avoide the device from identifying, so you could flash a WWE Rom to a rather locked german device.
as you might have realised, the picture you posted shows the magician and not the blueangel, hence the name Maupgrade instead of Baupgrade, which again is solved by the _noid version of the file and putting the device to bootloader first.
that the window does not show the versions from what version you flash to what version exactlyu doesn't matter at all. but as mentioned before, you should use an xp machine which will work like a charm!
am i to understand, that you have the latest official t-mobile rom on? the wm2003se?
as fast and battery friendly that might be, it is so out-dated and practically no newer third party software will be supported, like the fantastic application SPB Online, and the interface is incredibly ugly. if you ever want to try and flash your device again, try my tips above and it will work out just fine, as you seem to have mixed up a few things, but never mind.
i wish you best luck for trying again and will stand by for support, whether something might still not work out as planned.
good luck
Chef_Tony

well if you upgrade under vista take a look here
also look here for MAUpgradeUT_NOID and proper files - it is on the bottom of the page, so you only need the nbf files

unlock mda vario III tmobile

Hi,
How can i fully unlock my new MDA vario 3 from T-mobile to work on all networks? now i make italian htc original rom but don't work with usim h3g.....thenks for all

dariob74 said:
Hi,
How can i fully unlock my new MDA vario 3 from T-mobile to work on all networks? now i make italian htc original rom but don't work with usim h3g.....thenks for all
Click to expand...
Click to collapse
i think u need this. http://forum.xda-developers.com/showthread.php?t=375583.if im wrong, apologise

dariob74 said:
Hi,
How can i fully unlock my new MDA vario 3 from T-mobile to work on all networks? now i make italian htc original rom but don't work with usim h3g.....thenks for all
Click to expand...
Click to collapse
First off to you and others, please remember that this is a library, not an HTC help line. You walk into the library and search the shelves for the volumes that you need, then you open them and search through for your answers.
You don.t walk up to the librarian get a library card, drop off a paper with questions and then say, " I will be back in an hour for the answers " What you are asking is Kaiser modding 101 and you should have searched yourself first.
Follow every step here, to unlock your phone
http://forum.xda-developers.com/showthread.php?t=433835

I have searched in the forum and I have performed all the information that I found ... everything works except the unlock of the phone, I requested further help because the rom installed is Italian and I do not know if there is some other step to unlock the sim ... thanks

dariob74 said:
I have searched in the forum and I have performed all the information that I found ... everything works except the unlock of the phone, I requested further help because the rom installed is Italian and I do not know if there is some other step to unlock the sim ... thanks
Click to expand...
Click to collapse
The rom has nothing to do with the sim. If you followed all the steps in mskip's tutorial, then your phone should be sim unlocked.
If you then flash an Italian rom, your rom will be in Italian. If you flash an English rom ,your rom will be in English. What exact result are you looking for ?

I'm trying to use the handheld with a sim H3G with Rom italian, I can use any rom it must be Italian also not original HTC (called rom cooked right? I am not expert on windows mobile) now you list what I did step by step :
1. I turn on the handheld
2nd when in windows mobile without sim and without the micro sd I connect to pc via usb cable, start KaiserUnlocker.exe, all three steps are completed successfully
3rd Restart handheld put the sim (at handheld off course) and I always Simlock top left on display.
4th I tried to copy the files on your handheld executable downloaded from xda forum, which unfortunately is English, but when I try to launch from the handheld, entering into windows obviously because I do not know how to start the executable in another way, I always say that not is the type of "phone" correctly, I tried one but more than anything, I would not have created a casino with the rom installed (currently there is RUU_Kaiser_HTC_ITA_3.29.408.0_radio_sign_25.83.40. 02_1.65.17.56_Ship)
thanks

Have you done everything here, step by step ? No shortcuts.
http://forum.xda-developers.com/showthread.php?t=433835

hello all ok I have solved, the three passages were always successful but ultimately unlock after 3 step came out on handheld combo from tick to accept the setting and the unlock code to unlock 00000000 thanks for the willingness and the help with your links
ps check the news of the 3 combo box I have not read anywhere I understood only by me
pps sorry for my schoolastic english

the wing by tmobile

hello: iam trying to unlock my phone so i can update the sotware to windows mobile 6 can anybody help me with this ?

Ok. Several things: 1) If you have the default T-mobile ROM on your Wing, you already have Windows Mobile 6.1. 2) If you post the same question in multiple subforums, you are very likely to be ignored. 3) If you only wish to CID unlock the phone, then all you have to do is flash any other ROM found on this forum. Be sure to search in there for "How to Flash" before opening another thread asking for help. Thanks!

what do u mean default T-mobile Rom?

please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....

fluoroseal said:
please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....
Click to expand...
Click to collapse
Alright. If you bought this phone directly from T-mobile US, then you do already have Windows Mobile 6.1. Also, to check for sure which version you have, you can go to Start->Settings->System->About. It will display what version of Windows Mobile you have.

I suggest you start with the wiki. Since you keep asking to 'unlock' your phone to be able to flash a new ROM i'm going to guess that you don't know what your doing. Make sure to read up on what is required to flash a new ROM. If you need any more assistance please make sure to ask the correct question in the correct forum and I'm sure everyone will be willing to help. http://wiki.xda-developers.com/index.php?pagename=HTC_Herald

@elazullizard, unless something has changed, the Wing DOES NOT come stock with 6.1, it comes with 6. Now like I say, that may have changed, but I just bought a brand new in the box Wing manufactured in November 2008, and it booted into stock plain jane T-mobile 6. So yeah, this guy does indeed need to CID unlock and upgrade to 6.1 or 6.5.

thank you. and its hera 110 rom ver. 4.26.531 wwe and i do have windows 6 professional but i would like to cid my phone so it can take a new rom? and you help in this mater?

Yes, first of all soft-reset your device using the little hole on the left hand side of it, as soon as you press the little button in the hole, press and hold down the camera button until the 3 color bootloader screen is displayed...confirm that your IPL/SPL is above 4 and reply back to me with the exact number and we can get you started from there.

hello there ther a little problem I use the divce on and everday as my life line for work and i do not have a spare. and this forum takes forever for someone to get back to u ,
so if we can talk head up on yahoo or let me know when u are gona be on this site so we can do this together thank u paul

its rom ver 4.26.531/wwe
radio ver 03.21.90 and runing windows mobile 6 professional.......

Well my yahoo IM is listed in my profile information, and I still need to know your IPL/SPL in order to help you.

Dear friends,
I use T-Mobile Wing. 2007 manufacture.
Can u help me to upgrade it. It uses Windows Mobile v6.0. I wanted to change it to Window Mobile v6.1 or v6.5.
I use it with another sim card. Not T-Mobile. But it is working properly.
How can I do this?
IPL 4.10.0002
SPL 4.10.0000
Thanks a lot...
P.S. Can I use GPS from my mobile. I couldn't found it.

There are plenty of posts that teach you how to flash custom ROMs. If you don't know where to start try searching for "how to hard SPL." You can flash custom ROMs without having your phone hard spl'ed by using USPL. If you decide not to use hard spl there is a great change that you will brick your phone and will no longer be able to use it again. After all you have to do is search for a flashcenter or use mine http://mywing.info/dl/Flascenter.rar . As for you GPS question, there are plenty of gps programs out there. You just need to buy either an external bluetooth gps receiver or a USB gps receiver. pair it with your phone and your done.