Admin Reset Code - 8125, K-JAM, P4300, MDA Vario Software Upgrading

hi there,
I want to do an admin master reset on my phone and i have been told that i need an admin code to do it with.
The reason that i want to do this is because my phone is very slow and still as the O2 software on it eventhough i have deleted the relevant files as mentioned in this forum.
Could anyone help me please
Thankyou

I think you just need to hard reset it? There's an app called ClearStorage on your phone, or alternatively there's a key press combination I don't know on the wizard, or you can use my app called VJEschaton. But Clearstorage should do the trick.
But be careful - it will wipe EVERYTHING off your phone. Backup your contacts etc first.
V

Related

Cannot Hard Reset please help

Hi all,
i have Flashed my XDAIIs from WM2003SE to the new himalaya rom version,
everything works fine ,but the only problem is i cannot hard reset , it
i have a problem with my buttons (Home,email, explorer, ok), they cannot be used since i purchased it, so in this case i cannot hard reset my device, as i have to press mail button to confirm the hard reset setting,
Please any one have any alternate solution of hard reset or to format the persistent memory let me know
Try a program like spb pocket plus. It can put a button on your today screen to do a hard-reset & soft-reset as well, in the system section .
It's available on trial, so go for it.
Cheers, M
hi again , i downloaded the sbp plus and installed the program,i can find the button for soft reset , but here is no button available for hard reset , could u please guide me
The hard-reset button must be added manually, no idea why ;-)
So go to: start -> settings -> today -> items
select 'sbp plus' and push the 'options...' buttons. Now you can add it to the today bar.
Succes, M
hi thanks for your co -operation , i tried to follow the procedure as you told , once after selecting the today--items--Pocket Plus--options , here comes a new screen titled "today Plug-in" i click on Add button, and a new "untitled" button is created on left hand side, than i click on items on the same screen ,i get list of category "indicator, programs, my documents,system,settings,custom" i tried to find the reset utlity all over the categories but i cannot ,
your comments are appreciated ,i have installed spb plus version 3.04 buid 4195
I have to install it first so give me a few hours for exact details
Hi Kevin,
I'm terribly sorry that I wasted your time; I must have been mistaken fot I can't find it back myself. I looked spb pocket plus, battery pack pro & some other tools but can't find it back for you.
Probably you need the e-mail button as well to put it into bootloader? Or is BA lacking such a mode? cause my magician is havin a hard-reset when coming out of bootloader.
Hope it helps.
Sorry, M
oh please. If you're in WM5, you can't hard reset just like this.
Put it into the mode which you can format storage....
do a search in the future.

How tro i remove 02 active from xda2i

I want to remove the o2 active with the corporate thing but icant fine the code
can anyone please help me ?
1) Wrong forum - xdaIIi is an Alpine
2) Was going to ask why you hadn't searched, but for some reason searching for 'remove O2' comes up with nothing :shock:
Try http://forum.xda-developers.com/viewtopic.php?t=47178 and choose whether to install new firmware or just hard reset. If you choose the latter and want more info just search for corporate install.
K.
I am not sure if this query has been answered. Pls see this link posted by me .
http://forum.xda-developers.com/viewtopic.php?t=47376
There is a unlocker tool in this site , I am not sure where i picked it up from , but used it to unlock my pda. Try the home page i think there is a unlock tool link there.
SOLUTION:
1. Hard Reset after backing up
2. Choose Corporate User
3. Enter PIN 0506
This will install a corporate edition of Mobile 2003SE and will not include the 02 stuff.

imate pda2k

hi all
i upgrade my pocket pc imate pda2k se2003 to windows mobile 6 professional with (HELMI_BA_WM6_R0_Public Pass newdevicesuck) its working fine but after one day my pocket pc got error (wrong password) i enter correct password many times but it say worng password i soft rest my ppc after soft reset my ppc can't start. reset my ppc many time but problem is still i connect my ppc with desktop pc to syncronise (microsoft active sync) but dont detect my ppc . plz help me what can i do?
plzz
AddAn
There is a bug in WM6...when the main battery is drained or removed you cannot use your password. In this case there is no other option...you have to make Hard Reset!
thx for ur reply.i reset the PPC On/Off button + Reset button.but problem is still it requests passward.How to make Hard Reset and further help.plz reply
If this is true I'm sure you do not perform Hard Reset correctly. If this is new ROM you should go to Boot Loader first.
Tip:How to:
1.Perform Soft Reset
2.Push Record and Camera button at the same time and hold them until the Boot Loader screen shows up.
P.S. You should do step 2. before the Radio version/ROM version appear in the right bottom of the screen.
3.“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES
P.S. Use the Record and Camera buttons for navigation.
4.Press Mail button.(Do not touch anything until the white screen disappears)
NOTE: IF YOU WANT TO GET RID OT THE PASSWORD(WITHOUT DELETING YOUR FILES) YOU SHOULD PERFORM NO/YES/NO PROCEDURE!
That's it! Good Luck!
thx.soft reset done.thx alot for ur suggestion.PPC working properly.if there is any other Bugs n other issues that r ristricted in this version plz send me detail.if u dnt mind.once again thx
my camera and recorder button works before booting and after that it does not move the option in the boot menu...............will some one please help me
i had got imate pda2k could u please tell the place form were i get steps to inatall wm6
welcome to the forum!
short question - short answer:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
step by step instructions, don't skip anything, if there is something you don't understand, come back to this post and ask for it.

Save me from sending my device back (password reset)

I bought a VPA Compact V a couple months ago to replace my Orange M700 and LOVE it.
Unfortunately Last Night I was playing with password features, and created a password by mistake. I've tried to remember what I typed in and was told it was not valid and asked for my password again! There is an option to reset your password but it is grayed out!
So I called up Vodaphone and they walked me through a hard reset (which I could not do for some reason, instead of getting the white screen, I always get the standard vodaphone one)
After a few attempts they told be I'd just have to return it to and be without phone for up to three weeks which is outreagous! I have had NO issues before this time and really need my kaiser for work. I know I am risking a public scalding and accusations of being a thief but I can assure you I am legit (I've got the bills to prove it!), but given my low post count I can see why you may have your doubts.
I don't really want to do a hard reset if I don't have to, but I think that it is my only choice. My old M2000 (blue angel) looses data if the battery is not in, can I do a similar thing with the kasier?
Thanks in advance,
WWWeed.........
does anyone know if WM6 prevents you from hard-resetting while the device is requesting a password?
Did you follow the steps in the wiki to do a hard reset with just the hard keys on the phone?
You should be able to use the "Clear Storage" icon in the settings without having to know the password if I remember well. That triggers a Hard reset too. But I'd just go with the hard key method too, only takes a couple of seconds...
The Kaiser will not lose any of its memory if you remove the battery.
At this point, you have 2 options. The first is to perform a hard reset; the process is documented in the Kaiser Wiki. Your second option is to download the OEM ROM that your phone shipped with, enter bootloader manually (also in the Wiki) and reflash the device. Either way, you will lose any data not on an SD card.
URPREY said:
Did you follow the steps in the wiki to do a hard reset with just the hard keys on the phone?
Click to expand...
Click to collapse
Yes I did, but instead of getting the white screen asking me if I want to clear the storage, I get the standard vodaphone splash screen
kilrah said:
You should be able to use the "Clear Storage" icon in the settings without having to know the password if I remember well.
Click to expand...
Click to collapse
I cant get to that screen, I need to type my password in before that!
NotATreoFan said:
Your second option is to download the OEM ROM that your phone shipped with, enter bootloader manually (also in the Wiki) and reflash the device. Either way, you will lose any data not on an SD card.
Click to expand...
Click to collapse
I have a problem with this, I cant find the rom installed on this device. I have tryed 3.08.161.0 (Radio 1.64.08.21) UK Vodafone that can found here:
http://forum.xda-developers.com/showthread.php?t=365058
however the device starts to flash, gets to 1% and gives me an error (error 294: invalid vendor id)
Does WM6 prevent you from performing a hard reset while asking for a password?
Can I install any of the spl's on this site (so I can flash another rom) with just the bootloader? or is there any way of installing roms without using active sync?
Thanks again guys for your help! I assure you it is much appreciated!
I found a rom that works! Unfornatly I dont know much about it. The name of it is v1615_3.28.161.1.zip
I've uploaded it to rapidshare Here
It is an offical untouched rom from vodaphone directly.
WWWeed said:
Yes I did, but instead of getting the white screen asking me if I want to clear the storage, I get the standard vodaphone splash screen
Click to expand...
Click to collapse
You might not be holding the 2 keys long enough. You need to hold them for several seconds after you pressed the reset button.
WWWeed said:
Does WM6 prevent you from performing a hard reset while asking for a password?
Click to expand...
Click to collapse
It can't, the button method does the job before WM6 would get loaded.
But I guess if you've been able to flash you shouldn't need the advice anyway. Still, you should do a hard reset after flashing to be sure all previous and/or incionsistent settings are cleared.
Hold the two soft keys then poke the soft reset button with the stylus while holding the soft keys - hold them until you see a new screen, make sure they are fully pressed. then a while screen will come up and you press the "send" key to go through with the hard reset (reset to factory settings).

how can I reset my windows?

I don't know why my system freezes very often. I tend to reset my windows mobile. But I am afraid I will lose some apps I have right now. Is it possible? How to reset?
softreset never delete anything it's just like a reboot on a pc
hardreset does put your pda back to how it was when you got it
http://forum.xda-developers.com/showthread.php?t=449244&highlight=hard+reset
Hey Rudegar, thanks for your link and I know it doesn't hurt my app.
Other question for you. Can I upgrade my Windows Mobile to the lastest verison? Is that the same with resetting my windows without losing my existing app? Thanks again.
First of all, this thread is for accessories.
Updating the phone OS really does wipe EVERYTHING. So backup is an advice...
Have a look at Sony Ericsson Xperia X1 ROM development
I think you'll find something to your liking
Before even thinking of flashing you phone, READ about all the do's and don'ts.
One wrong action may brick your phone!
The only resetting that won't remove installed apps is a soft reset by pressing the reset button under the battery cover, removing the battery, or utilizing some sort of software reset utility like PHM Soft Reset. Upgrading or performing a "Clear Storage" under Settings/System will wipe everything.
What you might want to look at is when did the freezing start? Did it start after installing a new application and if so, if you remove it does it continue. If you've done any hacking or "tweaks" to the registry this can also cause freezing. Been there before. Good luck.

Categories

Resources