I am not sure if there is an existing thread here ..
I have just upgrade to the AKU2 ROM on my qtek ... but she is now stuck on the splash screen ...
Active sync doesnt pick up there is a device attached now so i cant run the update again ...
I have been trying to hard reset ... Comm + voice tag button and reset .. but it doesnt seem to work ...
Any ideas ???
Can anyone help me ???
have you tried holding the camera button and pressing the reset button in, this should make device go to awaiting flash status?
Related
OK i did a search but did not find anything really related..
a friend of mine at work here just handed me his 8125 after "attempting" to flash his ROM. Not sure what the heck he did BUT
1) the usb is not recognized so not active sync.
3) 3 battery meter only shows a plug (lower right ) yet the battery works.
the phone does recognice the charger..
HELP !!!
thanks in advance !
Reset, enter bootloader, reflash
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
DUlrich1227 said:
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
Click to expand...
Click to collapse
Camera Button is the only one you need to hold when resetting...
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
DUlrich1227 said:
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
Click to expand...
Click to collapse
Press the reset (or power down your device by holding the power button until you get the Okay to turn-off warning).
HOLD the camera button as your device powers up. This will get the BootLoader
just woke up and read your reply thanks ..
this is what i ended up doing
i bluetoothed from one of the roms enterbootloader.exe was able to run it
than ran one of the earlier rom upgrades..
re running the lockiwizb and will install sumters rom2
one question if you read this .. on both of the phones 8125's i get an error at the end of the bat file when running the lockiwiz.. is this normal ? is it because it was already ran once ? i am running it from the root (C
Hi everybody
i use a
Orange SPV 3000 cid/sim unlocked
WM 6 NBD 7.3
IPL / SPL 2.26
GSM 02.25.11
OS 5.2.1413 (Build 17913.0.3.0)
Now i tried to go back to the latest German ROM Update provided by ORANGE CH.
(RUU_Prodigy_21611_2161111_010410_OR_CH_GER_Ship.exe)
The Update Process start's on the PC Screen and remains on 0% and will terminate with ERROR [260]: UPDATE ERROR
The Phone hangs and cannot enter in "3 color update mode".
I have to take out and reinsert the battery to bring the Wizard back to Work.
Then the Wizard start's up and you can work without any Problems. (Exept you have to set the Date / Time again it is set to 2006-02-14 12:00)
Next Steps
- did a Reboot on the PC and the Wizard -> Same Result
- tried to Flash NBD 7.3 ROM again -> Same Result
- did a Hard Reset (press the 3 Buttons on Reset then Send Button ) and tried to Flash again -> Same Result
- tried to manualy enter Update mode (press Camera Button on Reset) with the same Result the "3 color update mode" will not appear
Has anybody a Idea what else i can do?
Tnx in advance for any HELP
when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.
mdajunkie said:
when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.
Click to expand...
Click to collapse
dear mdajunkie
now i can enter bootloader mode manually
looks like i did not hold the camera button long enough before
thank you very mutch for your HELP
I assume the Problem is locatet on the PC and have to find out why i can't flash my Device again.
Recently i changed something on the PC - I installed a external BlueTooth-Dongle from MSI including the MSI BlueTooth Software
Starting now with the easyest step - reinstalling Active Sync 4.5 and try again.
Regards
Now everything works fine
I tried to Flash a ROM and it work's
i did not change anything exept entering the bootloader mode manually once.(no reinstall activesync or deinstall bt software !)
May be entering the Bootloader Mode manualy "cured" my PDA?
i don't know
Regard's
im glad you got it to work. Most important thing is to read make sure you know how to and are confident enough flash roms. Makes things a whole lot easier. Atleast that way if something goes wrong you will be able to backtrack a lot easier and maybe explain your situation a whole lot better. Hope everything else goes wonderful for you and have fun man.
Flashed DID diamond+sprint rom and my phone is stuck in the Touchdiamond screen when it vibrateds first can anyone help me..
tried a Hard Reset?
(hold down center button and volume down while pressing reset for 3 secs)
Yeah thats the first thing i did..no luck just goes back to the start screen.
can u get to Bootloader?
Not sure how to get there..
umm.. Volume key up and reset i think (if not check Wiki)
once in Bootloader you can connect to PC and try flashing ROM again
if this doesnt work, try flashing original ROM (same process) and try a different version of Hard SPL. have u flashed other ROMS ok before?
It use to go in bootloader shen i pushed volume dwn, power button and enter botton..not doing it now..
its Volume Down and reset - my bad
Got to chip off now, good luck with it PM me and i'll see it tomrrow if u still got problems
No luck i have tried everything stuck in this loop anyone have anyother sugjestions
I can get it to go to the hard reset screen but that itanyonter way to force it into bootloader the direction in the manuel are different from what wiki says..
So is it bricked?
i ve a HTC diamond, and while flashing it stops working
===> dark display, softreset not working, hardrest not working
what shall i do to get it working againg ?
pls help .....
linde67 said:
i ve a HTC diamond, and while flashing it stops working
===> dark display, softreset not working, hardrest not working
what shall i do to get it working againg ?
pls help .....
Click to expand...
Click to collapse
Re-download your ROM, enter in bootloader (tricolor screen), and re-flash.
bootloader
the problem is, that i cant start the bootloader
what shall i do now ?
does your pc recognize your device?
if yes...try to start RUU (from PC) with your stockROM.
mein pc erkennt kein USB device und auch keine HTC diamond
no pc recognizion
no pc recognizion
there are several ways to try to revive your diamond, did you remove the battery for at least 10 min an try again to start?
search the forums, don't give up yet...i hope it works out for you and sorry i can't be of anymore help.
Your diamond is brick =/
i thinks its fixable, i just had also an hard problem.
try the following.
push "vol. down" + round button + reset, and hold
if ok, you see menu en pres restore to factory default.
( format only your os partition )
.. if still os does not start, do the following.
go here
http://forum.xda-developers.com/showthread.php?t=540290
follow it, this worked for me.
remove phone from computer.
if al done, reboot the computer so normal drivers are going to be used again.
put on phone and pres "vol down" + <-- button and pres reset.
you phone goes from serial to usb, and now you can flash again.
make user you hard spl your phone first. ( i use oli's 1.93 ) radio 13...
Y gen rom , great for me.
good luck restoring the phone, and don't give up. me was also 5 hours buzzy..
I used the Söderström 6.0 Rom, and suddenly my bluetooths stopped working, i cant turn it on, today i installed the original Rom from the HTC website and bluetooth still doesnt work, and i also cant Hard reset by pressing Vol down, Enter and the reset button.
What needs to be done?
Thanks in advance
Check reset.I have same problem.