My company uses Goodlink. I recently loaded the latest version (about 1 week old) after updating the firmware in my 8125 to 2.17. Goodlink hangs the system when it goes to the password screen to unlock the device. The screen goes blank and all white and the device does not respond to any keys or taps. Soft reset does not help as the device just goes back to this state as soon as it finishes rebooting since the first thing it does is go to the password screen.
Has anyone else seen or better still solved this problem?
Thanks,
Ira
Seen yes, solved no.
The only way to solve this is to disable the password on your account on the server.
Good luck!
I had the same problem and it was annoying.
The solution and it works perfectly is to upgrade to the new goodlink v4.8.1.14en solved
Related
Hi,
I have a Qtek9090 which I upgraded yesterday to Helmi BA WM2k5 AKU2.6 Beta (v.1.1.2 Beta).
Everything went fine and I do like it (apart from the usual problems with WiFi, BT,...).
However I got into a shock-state when I turned it on this morning after leaving it in the craddle during the night for charging:
It would turn on, but the screen was completly f..ked up!!!
I did a Softreset -> screen still messed up
I did a Hardreset -> screen still messed up
I did reflash the upgrade -> screen still messed up
I took out the battery for half an hour and put it back -> still the same
After many resets and so on, suddenly I got the color stripes again and the phone booted normaly. I did not even loose any data.
Next I put it to charge again and after a while (the screen went off meanwhile), I turned it on and guess: scrambled screen again.
This time, I did the Reset this way: battery-notch off, kept the Softreset pressed and simultaneously put the battery-notch on again.
Is this a known problem (shouldn't be - I searched the forum!)?
Why does this happen?
Any ideas???
Also, I have these questions:
- What is this selection one has to do after the upgrade for (2. and 3. item YES)? What should the first item be: YES or NO? Can this be the cause for my problem?
- Would it be wise to downgrade again? (In case this is a defect -> so I can try to claim warranty, if things get worse...)
- What is the patch for energy management for? Where can I download it, as the link in the Wiki does not work? (Has this to do with my problem?)
Thanks,
vma
The problem remains.
It does not seem to depend on the charging, but happens when the device is turned off for some time.
When I turn it on it will either work fine, or funtion with a wild flickering screen.
Arrggghhhh!!!
Am I the only one with this problem?
Cheers,
vma
Hi,
Some month have passed on this issue. The reason I did not post about it, was because I had to send my BA for repair and one never knows if the "enemy" is listening... Now the warranty has expired anyway and mey BA is fully working.
It may have been a coincidence, but one day after the upgrade the screen went mad and totally messed up. Only 1 Hardreset in about 100 tries would bring it back to normal for some period of time and even reflashing it with WM5 or 2003SE would not make it work normal again.
The screen would get messed up suddenly for no particular reason, normally during a standby.
At the end I had to send it in for repair, which was actually a good thing, as I complained about the loose stylo and bad working hardkeys, all within warranty.
I got a new key-pcb, backside and they reflashed the device with 2003SE.
I am almost sure that I must have done something wrong with the upgrade to WM5.
Strangely I was able to flash 2003SE onto it, though it did still not work properly: hours with messed screen and sometimes out of the blue I would turn it on and the screen was OK again for a few hours.
Could it be a bad cable connection, which got repaired as well? Was it just a software problem?
One of the things I was in doubt with: when you enter this menu to format the device, the instructions say to switch two options, but the menu on my device had three options. Sorry - I do not exactly recall the details.
Anyone with an idea, why my device went mad?
As a side-note: while WM5 was great, while it worked during the one day it worked. I specially liked to be able to turn the device completly off or being able to remove the battery without loosing data.
However: not having my beloved BA fo two weeks made me reconsider doing experiments on it. Since I have it back I did not reconsider flashing it again.
But I would like to understand what had happend...
Cheers,
vma
May I assume from the lack of replies, that this was a pure coincidence on my device?
Nobody else experimented this weird problems after upgrading to WM5?
I am considering upgrading my phone again, essentially because I am tired of being afraid of discharging the battery and thus losing all data...
Cheers,
vma
It started with a screen alignment problem. I thought by updating the ROM I may be able to solve the problem. No way... I went to the Qtek website and got an updated ROM. I started the update, and after waiting what I though was a reasonable amount of time, about 10 minutes, I assumed I had a problem. I removed the PDA from the activesync base and ITS LOCK. I get a screen that says "SERIAL". It won't sync or do anything for that matter. Can it be saved? Any help will be appreciated. Thanks.
try to upgrade again its not dead I hope .....,
Hello guys!
I'm having some trouble with my HTC Touch Diamond. I am running the latest ROM, and the phone has worked perfectly since I've got it!
But one day it suddenly powered itself of during a phonecall and I was not able to power it on again. I removed the battery, put it in again, didn't work. Took out the battery and waited for almost 30 minutes, tried again and now it worked!
Since then the phone locks up in no systematical pattern (when I wake up in the morning it mybe locked itself, sometimes when I listen to the radio or typing an SMS..). Do you have any idea what the problem might be? Can't type in the serial number as I just have managed to turn it on.
What should be mentioned is the behavior when trying to start it. Either the phone gives no respons, or it "buzzez" and the display shows "touch diamond", but the rom version is not appearing down to the right. When it starts, it starts just as it should and no error messages is displayed.
I have not tried doing a hard reset yet, which I must say is considered the last option.
Have anyone experienced something like this? Or does anyone have a suggestion about what might be causing this?
Thanks on beforehand
Edit: have performed a hard reset now (did not format the 4gb). But the problem is not gone.. The phone just died while surfing. Now it locks at the green windows mobile-screen just before the homescreen loads (if it even boots at all...)
Please help anyone!
I'm not sure if it a freezing problem or it just won't accept any input
Basically after my Kaiser has been on charge overnight I will get around to using it and can't. What will happen is the screen & buttons will not work, although they can be used for a split second every 3 seconds.
After a reset everything is back to normal, so I'm not sure what the problem is, I don't have a lot of programs installed and only 1 has been install in the past month which is A2DP Today Toggle, so far I've un-installed it and left it again but I still have the problem.
Thanks for any help
I have a similar problem. In the morning i have to soft rest the phone for it to work. Issues started after 6.5 upgrade. There must a solution somewhere in here..........
Does a hard reset fix the problem? Does this happen with every ROM you've tried?
I have only stuck with the official rom, I bought it on 6.0 and then updated to 6.1 after it's release. A hard reset does fix it but some time after it will return, bear in mind this has never done it previously just about a month ago.
I guess it might be a issue with some program that is being installed
Hi,
couple of days ago when I tried to unlock my screen, my phone immediately turned to black. I was not able to perform a fingerprint scan or use my pattern to unlock my screen.
It kept on flickering.. from unlock screen to black. After some time the phone restarted and came into recovery with the message: "Not able to start android.. Retry or factory reset."
After 3 times I did a factory reset..
So far so good for now..
Anyone experienced the same? I know someone in the Netherlands (I am from the Netherlands) had the same issue!!
I happen to be Dutch too. I don't normally use security for my phone, but I used that fingerprint scanner for two days to see if I would get the same problem. Unfortunately I have not encountered a problem. I hope you don't get this problem anymore either. Success with it