Hello everyone,I have the Vanilla ROM. 1.4 I believe, what has happened is that I had a friend look at my blue angle because he was considering getting one himself, he went to my Mobile Shell application from SPB, activated the portrait view (took time to load and he did not know that) so he decided to press is like a lot!!
So it tried to do landscape/portrait mode a lot! so we rebooted the thing. Then another problem came that the phone locked itself, and when trying to unlock the phone nothing worked, (press the "*" again to unlock the phone) that did not work at all.
After spending a lot of time I fixed that, then the screen alignment/navigating with the D-Pad was all screwed up, I managed to get to the screen alignment program and fixed that. Now I have this serious problem.
The phone cannot connect to my service provider (Cingular). And here is the funny part... Hard Reset does not at all!! very strange. Using a backup file I had useing SPB backup that also did not work.
(also I tried draining the backup battery and that did not work as well, guess the volatile memory thing in WM5 worked).
Please someone help me in this problem as I cannot use my phone! :'(
Fixed
Sorry about the post, I have fixed it by doing
http://forum.xda-developers.com/showpost.php?p=1164331
worked perfectly, reset the phone easily and now restoreing with a backup.
But if anyone can please tell me why Power/Reset did not do a hard reboot?
Hard reset is not enough
I've flushed my phone about 50 times during last two weeks.
I think, that there are some cases, that same data or state of "things" can survive flashing and hard reset. At least using helmi_c or my ROM.
Simply test: flash any helmi rom, turn on wifi and/or set button lock to wake up only using power button and perform hard reset. State of lock button is not changed, wifi tries to connect to any access point. Even reflashing with the same rom is not enough.
I'm guessing only: I think, that there is small bug - reset procedure checks validity of any particular block (or blocks) of data and skips initialization of same data it if is looks valid.
Maybe you have got the same.
Hi all. I got my Kaiser on Monday and am VERY pleased with it. Like pretty much all of the folks on this forum, I wanted to "upgrade" it a bit.
My problem is:
I installed the BBC file onto the mem card (2 gig). It said click OK to restart device. I did, but now it gives me the Windows Mobile screen and NOTHING else. The (left) indicator light is flashing green but nothing else is happening. When I press any of the buttons, they light up, but the screen does not change.
Mine is the HTC original rom, unlocked. The only thing I have installed on it is Skype.
When I call it, the incoming screen comes in over the WM startup screen but that's it. The phone works but the "Phone - Incoming" notification stays visible even after I have hung up.
I can connect and sync with ActiveSync, but the screen does not change.
Even after I take out the battery (because that's the only way to turn it off) and take out the mem card and restart, same thing happens.
I am in DESPARATE need of help!!!!!
Any suggestions as to how to "unbrick" my baby?
If there is any other info you wold need in order to shed some light on the issue, just let me know.
Thanks in advance.
Dominic
Hi all.
I found a way around the problem.
Apparently the file I got was a VERY old version. I did a hard reset (luckily I didn't lose anything as I only had it a few days) and installed the file from the link on this forum: http://forum.xda-developers.com/showthread.php?t=327695 and it works fine now.
Thanks to all of you guys who already did the hard work in getting links, etc.
Later.
Dominic
im just wondering if you guys experience their tilt freezing after installing the blackberry connect through the oem programs/setting.
everything went fine on/before installing the device. it prompt me that once its done installing, clicking ok would restart the phone. the phone restarted all through the windows screen saver screen. it would not move for a long time. it stays on the screen.
at this point i was piss because i couldnt make a phone call or anything. luckily i got a phone call but i cannot pick up the call at all. it rang but thats it. i tried restarting the phone by soft reset or taking the batt off. it still didnt work.
any input would be helpful.
thanks.
Had the same issue. Had to do a Hard reset and start over.
Left BB connect off for now.
I only saw that happen when I installed it on my storage card instead of the actual device.
i installed it in my storage device.
notrhj: how can i hard reset the phone? i tried other things.. is it possible to walk me through this.
i cant access anything on my desktop. its freezes especially after someone calls.. grrr no text.. nothing.
i fix the problem..
thanks.
The following (long!) post was originally posted at the PointUI forum, but I thought it best to cross post it here. I've tried to organize it as best as I can and appreciate those with the patience to read it and the good will to offer help.
------------------------
My AT&T Tilt (HTC TyTN II) is basically out of commision right now, and I can only track the source of the problems back to the latest update of PointUI (v1.02b, Feb. 4th 2008), as I've done nothing else with the phone since. However, seeing as how I've uninstalled PointUI and the problems persist (and are getting worse), I suspect a virus is afoot, or some other lovely problem.
Since the update, I've experienced the same problems as everyone else on this PointUI thread (system hangs on "running apps" screen and randomly), but in addition to that, several other things. I am running the stock AT&T ROM without the bloatware. These have been my symptoms for the most part since then:
Periodically, animations between menus would slow down considerably and sometimes freeze for a moment, even when I had nothing else running in the background. This would happen for any menu: the cog, the bottom bar, favorites, etc.
The touchscreen would stop working (usually, only within PointUI). This usually happened when animations would slow down, but it would also occur alone, randomly. The hardware buttons would still work during touchscreen failure, usually, but sometimes they wouldn't, and I would have to soft reset.
Sometimes, the power button wouldn't work, and I would press it several times thinking I didn't do it hard enough the first few times. After ~20 seconds, the screen would turn itself off and on. When the screen was on, it would not responding to touches.
The PointUI top bar that appears when using any application would, at random, not work. By this I mean when I would tap it, it's like it wasn't even there -- the Start menu would come down, or the volume control, date/time, etc. depending on where I tapped it. Also, the top right button (red X, or the check mark) would not display correctly in programs or the today screen (a check mark when it should be an X, etc.), randomly, and would not be responsive.
Yesterday (Feb. 23rd), things took a turn for the worse. Here's what happened:
When I started up Tom Tom, the screen went completely non-responsive. Only buttons would work.
After exiting Tom Tom (in an attempt to restart it), the touchscreen would continue not to work, both in PointUI and regular old Windows.
Shortly following this, buttons would stop working, and the entire phone would freeze up. Couldn't turn the touchscreen on and off. I did a soft reset.
During startup, when it showed the AT&T logo, the screen dimmed itself to the lowest brightness setting (it never does this). It would remain this way all the way through the bootup process and into Windows as well, never getting any brighter. Even after going to the backlight settings and increasing the brightness, the screen would get brighter, but would never turn off.
Once in Windows, the touchscreen was completely non-responsive. Buttons would still work, but everything would move really slow.
The screen would never turn itself off. Also, when pressing buttons, the screen would never get any brighter.
After mashing the buttons a bit (in anger, yes, but lightly), the touchscreen alignment application came up, asking me to touch the screen in a few places. This worked.
Then, a call came in. The screen froze during the animation for the notification of an incoming call. Also, the phone started to ring, but within 1 second stopped. However, it would vibrate nonstop (my phone is setup to ring and vibrate at the same time) till the end of the earth!
At this point, none of the buttons would work, not even the power button. Did a soft reset.
This was followed by the same exact symptoms ~4 times (touch screen not working, never turning off and staying at the same brightness level, etc). Outgoing calls would work ok, but each time, a call would come in and freeze up my phone.
Eventually, after several resets, the touchscreen would work without having to mash the buttons to get the touchscreen alignment app running. However, it would still freeze on incoming calls (only).
Somewhere between all the resets, I realized that sliding out the keyboard would never switch the screen to landscape. I can still type and my text would show up on-screen, and screen taps still work properly (even touchflo), but all of this would occur while still in portrait mode.
Lastly, the power button would only work once. It can turn the screen off, but not back on, ever.
Somewhere, between the resets, I uninstalled PointUI, which did nothing. I also tried running Sprite Backup, which would never open (and still doesn't at time of writing)!
Before the PointUI update, none of these symptoms were present (earlier release was v1.01b, used since early January). After the update, they began creeping up, getting worse over time. I have installed nothing else since the update, and have only ever sync'd the phone with my computer to charge it.
Today (Feb. 24th), it started getting a little worse...
When I make calls, sometimes the microphone doesn't work at all. I can hear the person I'm calling, but they can't hear me.
Sometimes, the green phone button won't start the phone application.
Power button isn't turning off the screen anymore at all.
This is the current status of the phone. Weathered, battered and beaten, it marches on, still capable of opening the HTC Audio Manager and playing my MP3's in consolation.
Any help regarding the source of these issues is greatly appreciated.
Some additional notes/summary:
I am running the stock AT&T ROM without the bloatware.
I haven't dropped the phone or let it get wet.
I may hard reset sometime this coming week, probably Monday. The first thing I'll do is reinstall PointUI v1.02b, and maybe TomTom. We'll see how that goes.
You know, the more I read this post, the more it seems like a virus.
Man... just hard reset/flash a new rom and be done with it.
SH4YD33 said:
Man... just hard reset/flash a new rom and be done with it.
Click to expand...
Click to collapse
I thought the above was the reason we DIDN'T have WM viruses?
Virus + Hard Reset = Problem solved?
SH4YD33 said:
Man... just hard reset/flash a new rom and be done with it.
Click to expand...
Click to collapse
I agree, at least that way you know if its hardware or software related and you stop fighting a losing battle
MM
tsadek said:
I thought the above was the reason we DIDN'T have WM viruses?
Virus + Hard Reset = Problem solved?
Click to expand...
Click to collapse
That's why I haven't bothered with any of the anti-virus programs out there. Why bother having a constant drain on the system resources when you can do a hard reset, and restore all the cabs & hacks in under 30 minutes?
-Jay
Just an update here, my phone started acting up again ~5 days ago: freezing on incoming calls, not switching to landscape when sliding out the keyboard, never turning the screen off, etc. 3 days ago it got better, and I was able to run Sprite Backup and tried to restore the phone back to my pre-PointUI days. It had to reset, and on that same reset, Sprite didn't run -- the phone just booted into Windows, and all my problems came back.
Last night, I got a call that froze up my phone again. So I reset it, and by surprise, Sprite Backup ran and started restoring my phone. Now it's back to the way it was in January, and everything works perfectly! This backup was made before I ever installed PointUI.
Bottomline, no PointUI, no problem.
However, I should say that with v1.01b, I never experienced any of these issues. Because of my experience, I'm not giving any test versions a try, but I may install 1.03b, when it comes out. Definitely doing another backup before that too.
Thank you everyone.
Sounds to me more like a hardware issue, perhaps with your SD card.
I had the same issues you were havingh, but without ever having installed PointUi on my Kaiser.
I was using Dutty's Rom version 7 with radio 1.27.xx
only installed aps : TomTom and SPB brain training
So it would seem this is a WM or TomTom triggered issue....
My Kaiser just started doing this very same thing today. I'm running the standard AT&T WM6.1 ROM and have been successfully since December 07. I have a 6GB SD card with TomTom on it, also have had no issues until now. Today, the screen didn't switch into landscape upon sliding the keyboard out; the camera freezes and/or is unresponsive; power button doesn't work (on OR off; with or without SD card inserted); couldn't pick up a call earlier today; TomTom freezes when loading; WM player freezes while loading media.... I have not installed any apps on this thing since January. Seems to me like some memory corruption going on, possibly page file related.
I *did* notice that I had about 45MB worth of temp internet files cached and cleaned those up earlier today after these symptoms started. Didn't fix the problem though, but being low on main storage may have contributed to the corruption problem.
I had hoped I wouldn't need to hard reset my phone but here we go....
So, I went to sleep one night when battery was around 55%, woke up 8 hours later, my phone surprising turned off (turn out to be out of battery)..
I charge and turn it back up, the screen for the first time since I got the phone start flickering (the first screen before windows boot). Looking for a quick fix, I want to hard reset, but I would like to backup everything before I do a hard-reset. The problem - I cannot get neither activesync to work NOR disk mode to work.
This flickering screen had never happened before, I don't know the cause. Very confused myself what happened while I slept, solution to at least ONE of the problem would be helpful
Thanks
Ok, I read on forums that I could potentially fix the problem by downgrading to HardSPL 1.37. The problem is that it requires activesync to work. Not being able to get it to work, I did a hard reset, now everytime i try to go into activesync, it tells me that i need to install some software from the Getting Started CD which I don't have.
Someone help me, this is driving me insane
Thanks.
I havn't notice this, but I cannot get anything out of hte speaker because the phone thinks a headphone is plugged in, i dont know if this disables any activesync from the usb cable.. but either way, I cannot get pass the screen where it asks to install software from Getting Started Disc.....
it seems like the computer doesn't recognize that a phone has been plugged, tried on diff computers already
someone help, my phone is useless with this problem.
I have also this problem, it happened about a year ago and I have not used it since.
Now I wanted to recover the contents of the flash drive, but I can't get it connected to the pc.
I made a hard reset, and it stays the same flickering and heating a lot. And now I can't go past the screen calibration.
How can I access the flash?