Hi all. I got my Kaiser on Monday and am VERY pleased with it. Like pretty much all of the folks on this forum, I wanted to "upgrade" it a bit.
My problem is:
I installed the BBC file onto the mem card (2 gig). It said click OK to restart device. I did, but now it gives me the Windows Mobile screen and NOTHING else. The (left) indicator light is flashing green but nothing else is happening. When I press any of the buttons, they light up, but the screen does not change.
Mine is the HTC original rom, unlocked. The only thing I have installed on it is Skype.
When I call it, the incoming screen comes in over the WM startup screen but that's it. The phone works but the "Phone - Incoming" notification stays visible even after I have hung up.
I can connect and sync with ActiveSync, but the screen does not change.
Even after I take out the battery (because that's the only way to turn it off) and take out the mem card and restart, same thing happens.
I am in DESPARATE need of help!!!!!
Any suggestions as to how to "unbrick" my baby?
If there is any other info you wold need in order to shed some light on the issue, just let me know.
Thanks in advance.
Dominic
Hi all.
I found a way around the problem.
Apparently the file I got was a VERY old version. I did a hard reset (luckily I didn't lose anything as I only had it a few days) and installed the file from the link on this forum: http://forum.xda-developers.com/showthread.php?t=327695 and it works fine now.
Thanks to all of you guys who already did the hard work in getting links, etc.
Later.
Dominic
Related
Well, I took a chance and this is what I get. It's 10:46pm and I have a PDA2k that won't even turn on now. Removed the battery and the whole thing.
Here's what happened, I have a PDA2K from Expansys. I decided to upgrade my radio from .06 to .10. I read every article regarding this and backing up very well. I took the instructions from http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.12_Upgrade and proceeded with the backup. I did the soft reset, and put my system in the cradle. A hot-sync took place. I then went to my folder on my desktop, clicked BAupgradeut.exe and I got the screen that popped up. I followed the instructions and clicked ok. It read my old configuration and what was going to be changed, and I clicked next. Up popped a screen saying checking information on your device...then my Active Sync shutdown, XP detected a new device and said it was ready to use. I noticed that the power light (charge light) on my PDA2k went out (yet there's power to the outlet) and Active Sync never came back on. I thought "this can't be good" but proceeded to wait 20 minutes, tried to get active sync working again and it couldn't find my unit. I finally tried to kill baupgradeut (and it's still up and running with the same "checking your information" screen. I finally said screw it (after 25 minutes) and yanked my pda2k off the cradle. No power, can't do a hard reset...nothing works at all...its completely dead. Tried pulling the battery off for a couple minutes and that didn't help either.
I'm pretty stuck here and hope you guys can help me out. (Even though everyone is probably asleep.) So, I've got a really nice paper weight here. If anyone has any thoughts, pass them on over. I chose the 1.12.00 upgrade from the same page as I mentioned above if that helps. I guess my main concern is just being able to get some response from this thing. Right now I get NOTHING.
Thanks,
Tom
Now I feel like a silly twit! Turns out I had a grey screen and was in bootloader mode. Its not too bright in this room tonight and I didn't see that...could have something to do with the 4 Guinness I had. I noticed it when the light reflected off the screen. I checked the troubleshooting guide and discovered the "grey screen" problem.
I just finished the upgrade and am setting things up. Everything's just peachy.
Sorry about being such a baby. I have insurance on this too. I could have just run over it in my Land Rover and got a new one....those trucks really flatten things.
Question: I used Sprite to backup just before I did this. Can I restore without jacking anything up?
Thanks for what I'm sure would have been a lot of help and support.
Tom
twn2 said:
Question: I used Sprite to backup just before I did this. Can I restore without jacking anything up?
Thanks for what I'm sure would have been a lot of help and support.
Tom
Click to expand...
Click to collapse
Tom,
You might want to read this thread.
http://forum.xda-developers.com/viewtopic.php?t=20891
Hope this helps.
Hemant.
Hermant - Thank you very much for your reply. I just wish it came 13 hours ago.
I found it on the xda-developers somewhere that someone else posted. I was trying to find your link which I stumbled upon before. But alas, I found something. It required that I use GetData before the upgrade, which I didn't do. I followed the rest of the directions (which was similar to your link) and everything is perfect. My Radio and BT upgrades are still there. Thanks again for the help! I bookmarked it this time
Tom
Tom,
Actually even i had found this link here but now i have tried it many times and it is working perfectly.
Glad that i could help someone since i have learnt a lot from this site so now is the time to give back.
Hemant.
im just wondering if you guys experience their tilt freezing after installing the blackberry connect through the oem programs/setting.
everything went fine on/before installing the device. it prompt me that once its done installing, clicking ok would restart the phone. the phone restarted all through the windows screen saver screen. it would not move for a long time. it stays on the screen.
at this point i was piss because i couldnt make a phone call or anything. luckily i got a phone call but i cannot pick up the call at all. it rang but thats it. i tried restarting the phone by soft reset or taking the batt off. it still didnt work.
any input would be helpful.
thanks.
Had the same issue. Had to do a Hard reset and start over.
Left BB connect off for now.
I only saw that happen when I installed it on my storage card instead of the actual device.
i installed it in my storage device.
notrhj: how can i hard reset the phone? i tried other things.. is it possible to walk me through this.
i cant access anything on my desktop. its freezes especially after someone calls.. grrr no text.. nothing.
i fix the problem..
thanks.
Okay, I've searched and can't find this problem but hopefully somebody may have some ideas.
Quite frequently, I lose the top line of my display (the one with the start button and the system status icons). Everything else works but that line just disappears.
If I then lock the device it comes back. When I unlock it, it sometimes stays but sometimes disappears again once it's unlocked and I then have to turn my phone off and back on again.
I have a standard Orange UK phone, standard ROM and I've used some of the performance tweaks listed here. I've also disabled Touchflo and am using spb diary as my home page.
Anybody any ideas because this is driving me mad?
I had the same, but only when TF3D was deactivated. Since I use it again, it doesn't happen anymore...
It happens on my Orange diamond as well - stock 1.37 rom with TF3D enabled.
It seems to happen once every 4-5 days, and doesn't really have a pattern. Sometimes it's switching between Today and Second Today, sometimes it's rotating, sometimes it's unlocking etc..
flash a new ROM
Hello there.
Well i just recommend you to flash a new cooked ROM. I havent seen this behavior with a cooked ROM.
Best regards.
Well, at least it isn't just me but does anybody have any idea what causes the problem and how it can be solved.
Could it be something to do with glyph memory?
I used to see this sometimes on the orange rom. Since flashing a cooked rom makes the device twice as fast - and removes that problem - I would just flash it.
unwired4 said:
I used to see this sometimes on the orange rom. Since flashing a cooked rom makes the device twice as fast - and removes that problem - I would just flash it.
Click to expand...
Click to collapse
I know it's the wrong forum to say this but I'm just a bit scared to flash it because I've never done it before.
I'm worried about either a) bricking it or b) losing some setting that Orange put in to connect to their network (voice, data, voice mail etc).
Hi
I've had a similar Problem!
It seems to happen when I take the phone out of sleep cos I've got a text and its locked (I've set it for 30min).
I press the power button but the screen only half lights and the top line doesn't display. It sometimes says 'password' in the top left but does nothing if I press it.
I can slide along the bottom line but it doesn't work properly.
Interestingly I also have a Orange Diamond 1.37 ROM (which I've unlocked).
I'm gonna flash with HTC's ROM from there site and I'll let everyone know if the problem persists.
Wish me luck
TheFlash007 said:
Hi
I've had a similar Problem!
It seems to happen when I take the phone out of sleep cos I've got a text and its locked (I've set it for 30min).
I press the power button but the screen only half lights and the top line doesn't display. It sometimes says 'password' in the top left but does nothing if I press it.
I can slide along the bottom line but it doesn't work properly.
Interestingly I also have a Orange Diamond 1.37 ROM (which I've unlocked).
I'm gonna flash with HTC's ROM from there site and I'll let everyone know if the problem persists.
Wish me luck
Click to expand...
Click to collapse
And what happened?
Hi
Sorry for the delay. I tried the HTC site ROM but it just gave me a message saying 'Sorry, this software download is not suitable for your device'.
So it looks like i'm stuck cos its still doing it about once a day just have to switch of and on again.
TheFlash007 said:
Hi
Sorry for the delay. I tried the HTC site ROM but it just gave me a message saying 'Sorry, this software download is not suitable for your device'.
So it looks like i'm stuck cos its still doing it about once a day just have to switch of and on again.
Click to expand...
Click to collapse
Okay. I still have the problem and am very, very tempted to try flashing a new ROM (and Radio). But I just can't quite work up the courage to do it since I've never done it before and it's the fear of the unknown.
dastewart said:
Well, at least it isn't just me but does anybody have any idea what causes the problem and how it can be solved.
Could it be something to do with glyph memory?
Click to expand...
Click to collapse
This happens to me too. I have a T-Mobile Compact IV.
I've found that using FreeUP RAM (part of SKTools) not only releases memory, but also fixes this problem (until the next time it happens, which admittedly is not often).
Just wanted to say that I've upgraded my Orange ROM to the new 1.93 and I haven't had this problem....yet.
2 days without problems so I thought it may be safe to post.
IVe also had this on 1.37.x.x on my mda cmpct IV. Like everyone on here Im considering flashing but Im waiting for t-mobile to release an update (they keep telling me the will, presummably the 1.93.x.x) so that if I then brick the puppy - I can blame it on there rom upgrade.
I want this phone to be better, I know it can be with a ROM change...but I dont want to brick it and for once in my life will have some patience to wait.
Hello guys!
I'm having some trouble with my HTC Touch Diamond. I am running the latest ROM, and the phone has worked perfectly since I've got it!
But one day it suddenly powered itself of during a phonecall and I was not able to power it on again. I removed the battery, put it in again, didn't work. Took out the battery and waited for almost 30 minutes, tried again and now it worked!
Since then the phone locks up in no systematical pattern (when I wake up in the morning it mybe locked itself, sometimes when I listen to the radio or typing an SMS..). Do you have any idea what the problem might be? Can't type in the serial number as I just have managed to turn it on.
What should be mentioned is the behavior when trying to start it. Either the phone gives no respons, or it "buzzez" and the display shows "touch diamond", but the rom version is not appearing down to the right. When it starts, it starts just as it should and no error messages is displayed.
I have not tried doing a hard reset yet, which I must say is considered the last option.
Have anyone experienced something like this? Or does anyone have a suggestion about what might be causing this?
Thanks on beforehand
Edit: have performed a hard reset now (did not format the 4gb). But the problem is not gone.. The phone just died while surfing. Now it locks at the green windows mobile-screen just before the homescreen loads (if it even boots at all...)
Please help anyone!
Hello
Ive finally got round to putting new radios and ROM on my diamond, a year after buying. Didnt want to before now incase i cocked it up (theres a lot of things to remember!)
Hard SPL went fine and i was putting the new radio on (1.00.25.05 in this case) when, at about 80% of the way through the install my pc froze (as its having a habit of doing at the most awkward times recently!)
I soft reset the diamond but now its at what i assume is the bootloader screen (?), its got red, green, blue and white bars and various writing, along with a message saying 'Upgrade ROM code error Please try again'
I had a hunt round and found something for another device saying how to get it back by loading a factory ROM through the bootloader menu but i dont know how to do this as i dont have a connection to activesync (phone wont go beyond this screen) etc.
If someone could explain in relatively simple steps it would help!
I should also clarify that the only way i can get this screen off is to remove all power but as soon as i put power back on it loads up direct to this screen again!)
When you device is in bootloader mode, you dont need active sync connection. just run the update utility and it will work without it, as it uses different drivers when connecting.
This turned out to be quite easy actually, i stumbled across the answer somewhere else!
Thanks for the help