im just wondering if you guys experience their tilt freezing after installing the blackberry connect through the oem programs/setting.
everything went fine on/before installing the device. it prompt me that once its done installing, clicking ok would restart the phone. the phone restarted all through the windows screen saver screen. it would not move for a long time. it stays on the screen.
at this point i was piss because i couldnt make a phone call or anything. luckily i got a phone call but i cannot pick up the call at all. it rang but thats it. i tried restarting the phone by soft reset or taking the batt off. it still didnt work.
any input would be helpful.
thanks.
Had the same issue. Had to do a Hard reset and start over.
Left BB connect off for now.
I only saw that happen when I installed it on my storage card instead of the actual device.
i installed it in my storage device.
notrhj: how can i hard reset the phone? i tried other things.. is it possible to walk me through this.
i cant access anything on my desktop. its freezes especially after someone calls.. grrr no text.. nothing.
i fix the problem..
thanks.
Related
Hi all. I got my Kaiser on Monday and am VERY pleased with it. Like pretty much all of the folks on this forum, I wanted to "upgrade" it a bit.
My problem is:
I installed the BBC file onto the mem card (2 gig). It said click OK to restart device. I did, but now it gives me the Windows Mobile screen and NOTHING else. The (left) indicator light is flashing green but nothing else is happening. When I press any of the buttons, they light up, but the screen does not change.
Mine is the HTC original rom, unlocked. The only thing I have installed on it is Skype.
When I call it, the incoming screen comes in over the WM startup screen but that's it. The phone works but the "Phone - Incoming" notification stays visible even after I have hung up.
I can connect and sync with ActiveSync, but the screen does not change.
Even after I take out the battery (because that's the only way to turn it off) and take out the mem card and restart, same thing happens.
I am in DESPARATE need of help!!!!!
Any suggestions as to how to "unbrick" my baby?
If there is any other info you wold need in order to shed some light on the issue, just let me know.
Thanks in advance.
Dominic
Hi all.
I found a way around the problem.
Apparently the file I got was a VERY old version. I did a hard reset (luckily I didn't lose anything as I only had it a few days) and installed the file from the link on this forum: http://forum.xda-developers.com/showthread.php?t=327695 and it works fine now.
Thanks to all of you guys who already did the hard work in getting links, etc.
Later.
Dominic
Hello guys!
I'm having some trouble with my HTC Touch Diamond. I am running the latest ROM, and the phone has worked perfectly since I've got it!
But one day it suddenly powered itself of during a phonecall and I was not able to power it on again. I removed the battery, put it in again, didn't work. Took out the battery and waited for almost 30 minutes, tried again and now it worked!
Since then the phone locks up in no systematical pattern (when I wake up in the morning it mybe locked itself, sometimes when I listen to the radio or typing an SMS..). Do you have any idea what the problem might be? Can't type in the serial number as I just have managed to turn it on.
What should be mentioned is the behavior when trying to start it. Either the phone gives no respons, or it "buzzez" and the display shows "touch diamond", but the rom version is not appearing down to the right. When it starts, it starts just as it should and no error messages is displayed.
I have not tried doing a hard reset yet, which I must say is considered the last option.
Have anyone experienced something like this? Or does anyone have a suggestion about what might be causing this?
Thanks on beforehand
Edit: have performed a hard reset now (did not format the 4gb). But the problem is not gone.. The phone just died while surfing. Now it locks at the green windows mobile-screen just before the homescreen loads (if it even boots at all...)
Please help anyone!
So, I went to sleep one night when battery was around 55%, woke up 8 hours later, my phone surprising turned off (turn out to be out of battery)..
I charge and turn it back up, the screen for the first time since I got the phone start flickering (the first screen before windows boot). Looking for a quick fix, I want to hard reset, but I would like to backup everything before I do a hard-reset. The problem - I cannot get neither activesync to work NOR disk mode to work.
This flickering screen had never happened before, I don't know the cause. Very confused myself what happened while I slept, solution to at least ONE of the problem would be helpful
Thanks
Ok, I read on forums that I could potentially fix the problem by downgrading to HardSPL 1.37. The problem is that it requires activesync to work. Not being able to get it to work, I did a hard reset, now everytime i try to go into activesync, it tells me that i need to install some software from the Getting Started CD which I don't have.
Someone help me, this is driving me insane
Thanks.
I havn't notice this, but I cannot get anything out of hte speaker because the phone thinks a headphone is plugged in, i dont know if this disables any activesync from the usb cable.. but either way, I cannot get pass the screen where it asks to install software from Getting Started Disc.....
it seems like the computer doesn't recognize that a phone has been plugged, tried on diff computers already
someone help, my phone is useless with this problem.
I have also this problem, it happened about a year ago and I have not used it since.
Now I wanted to recover the contents of the flash drive, but I can't get it connected to the pc.
I made a hard reset, and it stays the same flickering and heating a lot. And now I can't go past the screen calibration.
How can I access the flash?
Hi, I've been trying to track some answers down all day about this, and I have no idea what's going on.
Last night, my phone was being a little slow, so I held the power button down and rebooted it. When it turned back on, it asked me to calibrate the screen and asked me if I wanted a password, and when I was finished, my SPB Mobile Shell didn't launch, and I noticed that I had no contacts, texts, or e-mails anymore.
However, it keeps on telling me that my storage memory is critically low. My theory is that my data is all there, I just can't access it for some weird reason. I ca actually use my old ringtones, so it wasn't a complete hard reset.
At first, I tried to hard reset the phone, but I don't have the "clear storage" application at all, so that's out. My next step was to try and see if I could somehow et someone at the phone store to flash it, but they just told me I had to buy out my contract because they are dicks. Big ones.
So I went home and tried to flash my ROM back to stock, so that at least I could erase the storage memory and restore some semblance of functionality, but I can't even do that. When I try to use Sync, the phone won't work, and on my Windows 7 machine, I can see that I have used 100% of the storage memory, and the drive is completely locked. I can't remove files from the computer, nor on the phone itself.
I tried to flash the thing, but even when I put it into the bootloader mode, the Flashing stops at 0% and nothing ever happens.
The phone is a CDMA Diamond 500, with MTS as the carrier. I just want to have access to that drive, is there any possible way to do this? Any info would be greatly, greatly appreciated.
Thank you to anyone who helps me out!
Just a quick note:
I found another person exhibiting this exact problem, but his problem was solved by hard resetting the phone. I can't hard reset my phone through ordinary means as described above, but is there any other way, like from the bootloader or by using hardware buttons? If I could hard reset, I think I could fix this whole mess.
Never mind, I managed to get it done.
Nothing to see here, folks.
I would use "Microsoft My phone" to back up my contacts and photos docs etc on your device drive. I'm not sure that a hard reset would even effect your "internal storage" so it's worth a shot.. You can find a .cab in the marketplace for the program. I know whenever I flash my phone it doesn't effect my Internal storage.
Sorry... to hard reset from bootloader hold down the volume down button and the center Touch wheel button and power button when you turn it on.
Hello I hope you could help me solve my problem, because I have been trying to find any solution more than two weeks with no results. My girlfriend asked me to take a look at her phone Samsung GT i9003 because all her apps started to act weird and she couldn't see her photos. So I checked it and as she said, suddenly all apps started to crash one by one and then the phone freezed. I wanted to do factory reset, but even the phone restarted, it didn't work and all apps were back. Even if I tryed to format SD card. They I tryed another method to factory reset through dialer. Same result. Phone restarted and nothing happened. I have even tryed to run it through Samsung Kies, which couldn't recognise the phone no matter what I did. Then I have read something about starting the phone to bootloader by holding power, volume up and home buttons. Didn't work. Have anyone got a clue what the hell is wrong with it? She can't write messages, make calls, anything because it is freezing all the time.
bump. anyone please?