Not sure if upgrade worked - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I did the upgrade tonight using the newest link provided. Everything seemed to work. The device went through all the steps. I needed to reset everything up (although it is using the same name for Activesync--yet I had to reinstall some of the settings).
When I look at my device information (using start, settings, system) I have the following listed:
ROM version: 1.8.11.1 WWE
ROM date: 11/24/05
Radio version: 02.07.10
Protocol version: 413.1.03
When I do a soft reset as the device is "booting up" I get the following information in the top left corner of my device:
IPL 2.17
SPL 2.17
GSM 2.07.2-
OS 1.8.11.1
Can someone please help me figure out how to know if the upgrade worked???
Thank you very much.

Everything looks right except what is reported in the Device Information. It should report the ROM version as 2.17.7.2
I would flash back to the original version, (re)CID unlock, and then give it another go. But before you reinstall all your apps, double check that ther version is reported correctly.

summiter said:
Everything looks right except what is reported in the Device Information. It should report the ROM version as 2.17.7.2
I would flash back to the original version, (re)CID unlock, and then give it another go. But before you reinstall all your apps, double check that ther version is reported correctly.
Click to expand...
Click to collapse
i did exactly this earlier today and everything worked beautifully. However, all of a sudden I got an error message in activesync 80072efd saying the server could not be reached.
any ideas.
Summiter you are awesome in all that you give to this online community. thank you very much for all that you do.

sads25 said:
summiter said:
Everything looks right except what is reported in the Device Information. It should report the ROM version as 2.17.7.2
I would flash back to the original version, (re)CID unlock, and then give it another go. But before you reinstall all your apps, double check that ther version is reported correctly.
Click to expand...
Click to collapse
i did exactly this earlier today and everything worked beautifully. However, all of a sudden I got an error message in activesync 80072efd saying the server could not be reached.
any ideas.
Summiter you are awesome in all that you give to this online community. thank you very much for all that you do.
Click to expand...
Click to collapse
Is it server-activesync, or desktop activesync that's giving you the error? If it's server-activesync, be sure to disable the proxy for the MediaNet connection.
If it's desktop, do you have a firewall or anti-virus installed? They can interfere with desktop activesync now that it uses the network stack.

Related

Error while using unlocker tool

Hello,
I seem to be having a weird error when I try to unlock the ext rom or unhide it. I can see the folder in my programs folder, but when I click on unhide, nothing happens and when I click on unlock I get a debug error which says "FL_IOCTL_BDTL_HW_PROTECTION - The parameter is incorrect" . I dont know why it keeps doing it. I have tried to upgrade to the latest rom version but after getting in the bootloader mode, in the utility screen it does not show me the new version of the rom, the only thing it shows me is that my device will be upgraded to 5.3.2, which is what i currently have.
Any idea why its doing what its doing?????
Thanks,
Sam
sameer25 said:
Hello,
I seem to be having a weird error when I try to unlock the ext rom or unhide it. I can see the folder in my programs folder, but when I click on unhide, nothing happens and when I click on unlock I get a debug error which says "FL_IOCTL_BDTL_HW_PROTECTION - The parameter is incorrect" . I dont know why it keeps doing it. I have tried to upgrade to the latest rom version but after getting in the bootloader mode, in the utility screen it does not show me the new version of the rom, the only thing it shows me is that my device will be upgraded to 5.3.2, which is what i currently have.
Any idea why its doing what its doing?????
Thanks,
Sam
Click to expand...
Click to collapse
If I remember correctly, Extended ROM unlocker is not working under WM5.
Not able to upgrade to 5.1.1700
As you say aybe the unlocker does not work with WM5, so I downgraded to the original factory version of 1.42. At this point the unlocker worked fine. So I tried to upgrade it to the latest version of 5.1.1700, but as soon as the utility screen comes up, it shows me that my rom will be upgraded to 5.03.02 which is what i have had all this while. So I upgraded it back to the same version and just upgraded to the latest radio version. When I try to use the unlocker again in this 5.03.02 version I still get that same error.
Can anyone please help me to upgrade to the latest rom version 5.1.1700 and tell me what this error means.
Thanks in advance,
Sam
Re: Not able to upgrade to 5.1.1700
sameer25 said:
As you say aybe the unlocker does not work with WM5, so I downgraded to the original factory version of 1.42. At this point the unlocker worked fine. So I tried to upgrade it to the latest version of 5.1.1700, but as soon as the utility screen comes up, it shows me that my rom will be upgraded to 5.03.02 which is what i have had all this while. So I upgraded it back to the same version and just upgraded to the latest radio version. When I try to use the unlocker again in this 5.03.02 version I still get that same error.
Can anyone please help me to upgrade to the latest rom version 5.1.1700 and tell me what this error means.
Thanks in advance,
Sam
Click to expand...
Click to collapse
I think we have a slight misunderstanding here. 5.03.02 and 5.1.1700, here are exactly the same. 5.03.02 is the ROM version, while 5.1.1700 is the OS version of the ROM. So 5.03.02 IS 5.1.1700 actually.
So, one prob solved, how about this one....
First of all, thank you KTamas for helping me out on this one and clearing out this problem of Rom versions.
I have another question though, what is this wizard rom? and how different is it from the one that I just installed? I was trying to install the wizard rom before I installed the one that I have right now, but got stuck in the middle when I had to create the EXTROM folder and transfer the contents after editing the edit.bat file. I was not able to transfer the getdeviceid.txt file from my phone to my pc for some odd reason and so was not able to do much on that.
Can you please help me?
Thanks,
Sameer

8125 AKU 2.2 ROM has been posted on HTC America

http://www.htcamerica.net/docs/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe
This ROM is AKU 2.2, if I understand the numbers correctly.
On your marks, get set, go!!!
So is there supposed to be anything in this official ROM that is an improvement over summitter's latest?
BTW, I have summitter's 2.3 test 2 but when I go to device info the Rom version is 2.24.10.1WWE. I am guessing this is because it is based on the leaked version from Cingular but would like to confirm this.
It's a corrupted file. I tried downloading it last night and again today just to confirm.. Doesn't seem to be able to get past a certain point before it errors out stating that it's corrupted.
If anyone has gotten it to work, I"d be interested in hearing about it though..
Just downloaded it fine this way no issues, not installed it as i run a UK phone and being new here, and new to the imate systems dont know if it work or not
I kepted it on my comp so if someone needs it i can upload to a server to download for others.
Just send me a PM and i upload.
Keep trying until your downloaded file is about 51MB.
It does appear to be corrupted. It only shows 39MB when it should be 51MB. Strange.
If anyone can post the real file to the ftp that would be greatly appreciated. I can't get it to download correctly.
This is about par for cingular
Yep looks like mines only downloaded 39.1 meg in size sorry.
I think they're re-uploading the file now, because I'm downloading it repeatedly, and the file size keeps increasing. Shouldn't be more than another few minutes before the full file is there. Last I checked it was at over 37 megs.
EDIT: The file is complete, 50.0 megs. I'm finishing up applying the update now.
The link to the ROM is now gone entirely from the HTC download page.
Sumptin's up.
zoetrope said:
The link to the ROM is now gone entirely from the HTC download page.
Sumptin's up.
Click to expand...
Click to collapse
Ignore the fact that the link is gone, the URL at the beginning of this thread still works and points to the now completely re-uploaded file.
And it does work.. I just finished the update, and am in the process of a final soft reset after the Cingular app install..
sk0t said:
And it does work.. I just finished the update, and am in the process of a final soft reset after the Cingular app install..
Click to expand...
Click to collapse
Yeah, I'm all finished with the install and have started to reconfigure my phone. Unfortunately, I'm at work and don't have my apps here.
idownload and installation complete
so far so good. i am testing it right now.
installed no problem.
the screen for installation showed a more square version of the wizard.
"x-cingular. raising the bar" logo on bootup
it has got some new programs and fetures like.
goodlink - real-time push synchronization of email attachments, and PIM data
get express mail - email for corporate, personal mail while on the go.
dont ask me how to use them, its just there.
the rom version is 2.25.11.1 WWE
rom date: 5/11/06
radio version : 02.25.11
protocol version: 4.1.13.12
extROM version : 2.25.11.102
so far looks to be running faster then normal, but that could be coz its a clean install.
Seems to be working well here. Definitely faster. Will report as more tangible things become apparent. Comm manager has a much nicer look and feel and acquiring an IP address on my wireless network is much quicker.
TRANSPARENCY FOR BACKGROUND PICTURE
I UPGRADED MINE FROM 2.17 TO NEW 2.25. IT WORKS GREAT ECCEPT I CANT SET THE TRANSPARENCY FOR BACKGROUND PICTURE WHICH I COULD DO IN ROM 2.17
IS THERE WORKAROUND FOR IT TO WORK
DOES 8125 SUPPORTS TKIP ENCRYPTION?
THANKS
Re: TRANSPARENCY FOR BACKGROUND PICTURE
BabaCing said:
I UPGRADED MINE FROM 2.17 TO NEW 2.25. IT WORKS GREAT ECCEPT I CANT SET THE TRANSPARENCY FOR BACKGROUND PICTURE WHICH I COULD DO IN ROM 2.17
IS THERE WORKAROUND FOR IT TO WORK
DOES 8125 SUPPORTS TKIP ENCRYPTION?
THANKS
Click to expand...
Click to collapse
best workaround i can suggest... TURN OFF CAPS LOCK!!!
The HTC America update was removed, but now it is back and correct!
Re: TRANSPARENCY FOR BACKGROUND PICTURE
kyphur said:
BabaCing said:
I UPGRADED MINE FROM 2.17 TO NEW 2.25. IT WORKS GREAT ECCEPT I CANT SET THE TRANSPARENCY FOR BACKGROUND PICTURE WHICH I COULD DO IN ROM 2.17
IS THERE WORKAROUND FOR IT TO WORK
DOES 8125 SUPPORTS TKIP ENCRYPTION?
THANKS
Click to expand...
Click to collapse
best workaround i can suggest... TURN OFF CAPS LOCK!!!
Click to expand...
Click to collapse
DID NOT ASK YOU FOR YOR SUGGESTION ON CAPS LOCK.

MDA PROBLEMS: I have no idea

Hi all
I am posting here in the slightest hope that someone can help me out. In a nutshell I have a T-Mobile MDA III PH20B that has ceased working
I have tried hard resets but still have no joy and wondered if someone could help?
First off, on the back of the MDA once the battery is removed it shows;
Model PH20B
IMEI 35303000.......
When it starts up, in the bottom right corner it shows;
NO GSM
D1.06.00 ENG
If I choose START > SETTINGS > DEVICE INFO I see the following on the different tabs;
VERSION
Rom Version: 1.06.00 ENG
Rom Date: 08/05/04
Radio version:
Protocol version:
ExtROM Version: 1.06.117 WWE
IDENTITY
Model No: PH20B
Platform PocketPC
IMEI: (and no number!!!)
Problem is, the phone will not work following me trying to upgrade the ExtRom from the T-Mobile website (http://www.tm-phonedownloads.com/download_manager_mda_3.html). It now keeps bombing out out with an error message saying;
ERROR 120: COUNTRY ID ERROR n-n-38-38-38
The ROM image that you are trying to use is not designed to work with your device. Please check the vender Website and download the correct ROM update.
This has never been tampered with, has never been unlocked and is now dead as a dodo. Can anyone please off any advice on how I can get it backup and running? I am lost (no pun intended) without my Bluetooth TomTom and phone.
When it connects to its cradle, my PC can still see it, so I am able to copy files to and from it. Thats about all I can do with it though
frostie
Well it seems like you MDAIII has a corupt system and thus you need to reflash it.
Best option for you is wiki.
Go to the link in my signature and see if you can find a original version that you can flash it with.
The No GMS means that the radio part is corupt.
The 1.06 means that you have a OLD version of the OS as we are now at 1.42.
The fact that you can still copy files just proves that the device can be seem but without a radio it is not much of a phone.
The country code error you can get arond by using the MaUpgradeUt_noID.ZIP application.
In all you will find out most of what you need of wiki.
Follow the link for the radio upgrade to solve the NO GSM
Follow the link for the 1.42 for the os
And BTW wellcome to xda-developers (its your first post)
Cheers for the welcome. Yup, first post so had to make sure that I included as much info as I possible could to show that I am atleast trying to help myself :lol:
Thanks for the pointers. I will work my way through them and let you know how I get on.
Very much appreciated.
Backup and running
You want to know what the problem was? I feel ashamed :lol:
When it says Bootloader Mode - I got that far, but then pressed the on/off switch to fire it up again. I didn't realise the upgrade happened when it was a dark screen with just Serial or USB on it.
Shame!
Anyway thanks for your help as its back up and running, and up to date with 1.42 and 1.15 I also thought 'sod it' and have managed to make it SIM free too
Again, many thanks.
Well 3 posts later and you now have 1.42 radio 1.15 and sim free, thats wiki for you.
Now cook your extened rom and get rid of all the operator crap.

xda 11s stuck with serial v02.07

help... tried upgrading from wm2003 to wm6
I have now got to a point where the screen is dark with serial at the top & v2.07 at the bottom.
can anyone tell me how to get out of this & explain in easy terms how to upgrade to wm6
thanks
CHALFONTCOURIERS said:
help... tried upgrading from wm2003 to wm6
I have now got to a point where the screen is dark with serial at the top & v2.07 at the bottom.
can anyone tell me how to get out of this & explain in easy terms how to upgrade to wm6
thanks
Click to expand...
Click to collapse
That is the Bootloader screen and you should be there. I would have sent you to the wiki, but it is not working currently. If you are updating to another WM2003 ROM then run the file you downloaded now, if you are updating to WM5 or 6 or 6.1 then run the MA_Upgrade file now.
Kasush said:
That is the Bootloader screen and you should be there. I would have sent you to the wiki, but it is not working currently. If you are updating to another WM2003 ROM then run the file you downloaded now, if you are updating to WM5 or 6 or 6.1 then run the MA_Upgrade file now.
Click to expand...
Click to collapse
HI KASUSH
THANKS FOR REPLYING.
IM STILL A BIT LOST AS TO WHAT TO DO NEXT.
I CANNOT ACTIVE SYNC ANYTHING TO MY PDA. WHEN I PUT THE PDA IN THE CRADDLE THE SERIAL WORD GOES TO USB. AS I MAY TELL, IM A COMPLETE NOVICE AT THIS.
I HAVE A FILE ON MY DESKTOP STATING ASU3.5.2
THANKS KASUSH
ROB
CHALFONTCOURIERS said:
HI KASUSH
THANKS FOR REPLYING.
IM STILL A BIT LOST AS TO WHAT TO DO NEXT.
I CANNOT ACTIVE SYNC ANYTHING TO MY PDA. WHEN I PUT THE PDA IN THE CRADDLE THE SERIAL WORD GOES TO USB. AS I MAY TELL, IM A COMPLETE NOVICE AT THIS.
I HAVE A FILE ON MY DESKTOP STATING ASU3.5.2
THANKS KASUSH
ROB
Click to expand...
Click to collapse
I honestly have no idea what that file you have is. Go here and follow the steps to upgrade to WM6:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
You can find several WM6 and WM6.1 ROMs here:
http://forum.xda-developers.com/forumdisplay.php?f=386
Those 2 links should provide everything you will need.
Hi Kasush
Thanks again for replying.
Hopefully last question
I have saved the the Helmi ba wm6 file to my pc.
How do i transfer/run it to the ba if you dont have active sync?
rob
CHALFONTCOURIERS said:
Hi Kasush
Thanks again for replying.
Hopefully last question
I have saved the the Helmi ba wm6 file to my pc.
How do i transfer/run it to the ba if you dont have active sync?
rob
Click to expand...
Click to collapse
Are you running windows XP or vista?
Do you have activsync 4.5 or newer installed?
Have you tried putting the phone into bootloader mode (serial/usb on top, version on bottom) and run MA_Upgrade that came with the Helmi files?
Hi Kasush
Nearly there hopefully.
I have load the files from the websites you sent me.
The problem I have now that i cannot get wifi to work & when i put my sim card in, the phone doesnt work.
I have the following info:
rom VERSION 6.10.00. WWE
ROM DATE: 2/27/08
RADIO VERSION: NONE
PROTCOL VERSION: NONE
EXTROM VERSION: XPLODE_7.00
I HAD UPLOAD VERSION 1.15 RADIO VERSION, BUT IT DOESNT SEEM TO HAVE WORKED.
ANY ADVICE WORK BE WONDERFUL.
THANKS
ROB
CHALFONTCOURIERS said:
Hi Kasush
Nearly there hopefully.
I have load the files from the websites you sent me.
The problem I have now that i cannot get wifi to work & when i put my sim card in, the phone doesnt work.
I have the following info:
rom VERSION 6.10.00. WWE
ROM DATE: 2/27/08
RADIO VERSION: NONE
PROTCOL VERSION: NONE
EXTROM VERSION: XPLODE_7.00
I HAD UPLOAD VERSION 1.15 RADIO VERSION, BUT IT DOESNT SEEM TO HAVE WORKED.
ANY ADVICE WORK BE WONDERFUL.
THANKS
ROB
Click to expand...
Click to collapse
For the phone not working soft-reset. Some say you need to soft-reset twice, but I have never had to. There is a flaw in WM6 that when you disconnect the battery then connect and boot it fails to load the phone module. After booting a soft-reset will load it no problem.
For the wi-fi issue. Goto CommManager and click settings (in the lower right) and then click WLAN settings. Click turn on WLAN. This step loads the wi-fi driver. Now go to CommManager and click on wi-fi and it will work. This step must be done after EVERY reset/boot. But it only must be done once. after that you can turn on and off the wi-fi using only the CommManager as much as you like.
Glad to hear you got WM6.1 loaded and everything though.

Kaiser / TyTN II WiFi Problem!

Dear all Kaiser anchestor,
I have a problem with my Kaiser. I really hope that all of you can help me. Ok? Please....
This is the problem :
At the begining, My HTC Kaiser run so slowly, sometimes freezing (Condition WM 6.1 with it's SPL 1.56)
After I read the same problem in jockyw2001 thread, then I tried to flash My device SPL to 3.28 (with the step in front of that thread and the SPL from that thread too)
Flashing the SPL to 3.28 was successfully and my device run fast now
BUT!!! I can't Enabled my WiFi!
Next, I tried to Re-Flash my SPL to 1.56 again, and it's done successfully. But, the WiFi still can't be enable.
Next step, I tried to downgrade the ROM to WM 6, and WHAT!
I still can't Enable my WiFi!
Now, I'd upgrade to WM6.1 again (official ROM from HTC website). But, the WiFi still can't be enable.
The condition when I enable the WiFi is loading then turn off by itself. What's the problem?
I really need all of your help for this.
This is my Device Information:
ROM Version :3.29.707.0 WWE
ROM Date : 05\07\08
Radio Version :1.65.16.25
Protocol Version : 25.83.40.02H
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
I'm stress already. Hope all you may spare some of your time for help me to solve the problem. Thanks before. For more detail, just watch the video that I record when tried to enable the wifi.
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Whats wrong with running the HTC upgrade on your HTC original TyTN II?
andrylim said:
After upgrade to WM6.1, My Bootloader now is:
KAIS130
SPL-3.29.0000
CPLD-8
Click to expand...
Click to collapse
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Hmm...
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club. But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Thanks for your reply Boss!
or this one
The url is : http://www.andrylim.com/others/WifiProblem.wmv
Flying Kiwi said:
Since you're interested in running the official HTC WM 6.1 version on your TyTN II then why not simply run the HTC Upgrade program which will reinstall everything required (SPL, Radio and ROM) in one easy go rather than have to upgrade this and that, bit by bit? If you have an official TyTN II you can get it from HTCs e-Club/Support or you can also download it from the XDA Kaiser Wiki ROM page. Note that my SPL is 3.28.0000 and thats all through the official upgrade path so maybe your SPL has something to do with it? See if the official upgrade installs on your device otherwise you'll have to revert to the correct SPL before trying again. Note that the newest WWE ROM upgrade now also comes with a (slightly) better radio as in my sig. Remember to take your sim and memory cards out before attempting the flash.
***Edit*** Just realised you're running the SEA rather than WWE HTC ROM I'm using so yes 3.29 looks to be the right SPL for your ROM, the rest still applies though.
Click to expand...
Click to collapse
Use the official upgrade package - not just the rom file
andrylim said:
Sorry Mr Flying Kiwi, I think you didn't read the message completely. I've already re-flash from OFFICIAL ROM WM6.1 from HTC e-Club.
Click to expand...
Click to collapse
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
But, the same problem. It's not fix yet. I've reflash over than 5 times, downgrade to WM6 over than 2 times. an the result is the same. My WiFi Cannot be enable. I hope you can play the video that i record from the links up there (440kb only), so you will know my problem.
Click to expand...
Click to collapse
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh.... Btw, I've read from another thread (Athena). They said that someone ever got a problem like this. The cause is the WiFi MAC Address is missing/erased? Is it possible? I thought that MAC Address is a serial number of WiFi such as an IP, where saved in WiFi chip/device and cannot be erase. If do so, how to set an MAC address to the WiFi module? Do you have an idea? I'd tried to have a silly search about that address in Registry, but I cannot find any key that sounds about MAC Address. (Mac Gyver maybe?)
Flying Kiwi said:
I read it alright but as you've not done it *using the officially supplied HTC upgrade package (not just the ROM file within it from HTC e-Club)* I reccomend you give that a try. No special hard spl version is reqd and as long as you have an official ROM to start with and you're upgrading or reinstalling the same ROM version, it's simply a case of running one file and following the instructions. Once you've got the reflash to run that way and completed the process, simply hard reset and then test your Wifi before installing anything further.
Perhaps the capturing program over Activesync may be interfering with things (but I did view your wmv). What I am sure of is that if you have the correct ROM matched to your device and correctly installed with the right spl and radio, Wifi should work fine. Running the official upgrade is the easiest way to get this but if there is something non-official about your current setup, the upgrade program may refuse to run. Let us know if that happens. It's clear that you didn't do this in the beginning because you ended up with the wrong spl version for your rom so it's time to do it the official 'HTC Customer' way.
Click to expand...
Click to collapse
More specifics needed
andrylim said:
Hahaha.... thanks for your information. I'd tried yesterday. And still no response. ugh...
Click to expand...
Click to collapse
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Btw, bro... I've been search a problem like this in this website. I've found the same problem in Athena thread. They said that the MAC address is missing, but some one make a fix but only for Athena.
this their URL: http://forum.xda-developers.com/showthread.php?t=387454&highlight=Athena+WiFi+Problem&page=5
Thanks & sorry if i waste your time in solving my wifi problem
Flying Kiwi said:
I was offering serious advice not pulling your leg. Now, when you say 'still no response yet' - precisely what do you mean (exactly what did you try and what happened)? I've flashed my Kaisers ROM a couple of times now using HTC official ROM upgrading packages and it's gone perfectly fine. As far as the MAC address goes, I know there are ways of changing it (because there is an extremely small possibility that you may end up with two identical MAC adresses on the same network and this will cause problems) but this won't be the culprit in your case. I think (again) the first thing to do is to use the official package (and only that - no additional tools/utilities are reqd) to get everything in order and let us know how that goes and what versions of everything you end up with.
Click to expand...
Click to collapse
andrylim said:
This is the information that appears in my device now after re-upgrade the official ROM from HTC e-Club:
File name : RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
KAIS130
SPL-3.29.0000
CPLD-8
ROM version : 3.29.707.0 WWE
ROM date : 05/07/08
Radio version : 1.65.16.25
Protocol version : 25.83.40.02H
Click to expand...
Click to collapse
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
Btw, may i ask a question? I found something strange about a MAC address. Yesterday I'm not intention open the "Wireless LAN" from Settings > Connections > Wireless LAN
In Advance tab, there are Status, MAC, and IP. My Question is is the MAC address serial appears even you didn't enable a WiFi? In my device it's empty.
Click to expand...
Click to collapse
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Hahaha... thanks. Btw, I have another problems.
I bought this device from other country (Singapore). My friends said, the Singapore HTC can view the device history. They can see if the device already being flash how many times and anything unofficial program such as SPL or radio, then the warranty wil be void. Because, my friends already have such a problem also with his device Dopod U1000 (Even he revert to his original SPL or radio).
I think i should throw this device or sell it out and buy the new one. Hiks...
Flying Kiwi said:
That looks right to me but if you haven't yet ran the upgrade file above to flash to ROM you need to do it the official way and try that. If Wifi is still behaving as in your video do a hard reset and try again (before loading any additional software).
In mine it's empty too but if you go back in after enabling Wifi, theres a MAC address in there. I really don't think your problem has anything to do with the MAC address but if you've tried all of the above and still can't get it working, as you appear to have an official setup, it's time to contact Tech support and get them to go through some checks over the phone with you. Maybe someone else has thoughts on this......
Click to expand...
Click to collapse
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
Doesn't it make sense to at least try what's been suggested first? What have you to loose? The hardware company have no need to know what 'ROM Action' has occurred in the past and who knows what any people you've leant your TyTN II to may have done with it..... They only need to know how it is now and whether it's currently official (ie flashed using the HTC upgrader).
andrylim said:
I think i should throw this device or sell it out and buy the new one. Hiks...
Click to expand...
Click to collapse
I'll give you $50 for it.
The same problem
Im having the same problem... my wi-fi do not turns on! I have flashed this a lot of times, and sometimes works, sometimes dont.
Does anyone have any ideia about this? im stressed becouse i have the same problem... could anyone tellme a good radio in order to try to solve this issue? thanks
Wi-Fi issues
This has worked for me, dont know if its the same case with you or not.
My device was never able to connect to my Wifi n/w at home. If I went to start -> setting -> connections -> Wifi, it would show my home n/w as available, when I tried to connect to it, the status changed from Available to "connecting" then became available again.
In my home n/w I had access type authentication as WEP keys + Mac address filtering. My device was added to the MAC address list so that was not a problem. The issue was access point authentication which was set to WEP keys type authentication on my router. Once I changed from WEP keys to WPA-PSK (data encryption type TKIP) my WM was able to connect to the router.
I have HTC tytn II and its wifi is not searching any other wifi devices or router even in very close range , but wifi is turning on and the green light is also blinking
So, is there a hardware problem?
I did 3.29 hard spl , hard reset ,hard spl 3.34 , but the result is same.
and in network adapters IEEE 802.1b/g goes down and down in the list of network adapters , please HELP.! and sorry for my bad english
try a newer radio
mfsr98 said:
try a newer radio
Click to expand...
Click to collapse
Currently the Radio Version is 1.70.18.02
before this Radio Version I had 1.65.*.*

Categories

Resources