Related
I'm just starting to get into the depths of my PDA2K and this site is GREAT!!!!!!! Since I'm just one step up from "The Village Idiot", I have a couple questions for all you pros.
After reading about using the extended ROM, and unlocking it and seeing what's in there, I think I've figured it out. Whatever CABs are listed in the config file will be installed upon a hard reset....correct? If true, and since I have only 3.5MB left in Ex ROM, can I put the other CABs I wanted installed in say /storage/CABs, list them in the config file and upon a hard reset they will be installed? Is there any reason to put them into Extended ROM rather than Storage? Is it alright to put CABs in from like games, Resco Explorer, WebIS Mail, etc.? Lastly is there a way to set the programs up where I don't have to go back and enter all the registration numbers again?
Thanks a ton for your help!!!
Tom
In extended rom they are not taking up your precious storage space on the device.
cruisin-thru said:
In extended rom they are not taking up your precious storage space on the device.
Click to expand...
Click to collapse
is it possible then to keep the installation cabs on storage card,
and also, can that path be set in the config file in ext rom?
what happens if a particular cab is not found after hard reset?
is the installation stuck or it just gives a warning and keeps on going to the next cab listed in the list.
Have a read of this
http://forum.xda-developers.com/viewtopic.php?p=83119#83119
It might be a bit to deep but should help you along the way.
1) You can keep a cab anywere you want
2) make sure your cab is read only as it can delete itsself after install.
3) to run a auto install from a differnet storage place you need to hack the reg (see thread).
In all if you have a sd card you could leave your EXt rom empty.
Hack the reg to the new postion and run the Autorun from there.
Have fun
Thanks for all the infor everyone! From what I've read in other threads I need to make sure that TPdisabled is set to off so that when programs like WebIS Mail and SplashID get installed I can touch the screen to make sure they install into the right place and other things. Correct? If this is correct, should I just remove TPdisabled all together?
Thanks again,
Tom
TPdisabled can't be set off, its either run or not run. So dump it and you wont have a problem
MDAIIIUser - Thanks for the link! I looked at it and you're right, it's pretty indepth and I'll have to read it more closely at a later time....like at work.
Question1: leochan2005 had a follow-up saying "why not use backup"? While I agree this would be easier, I'm assuming that by using your method one would get a much "cleaner" install than backing up all the crap that was on the system prior to the hard reset...correct?
Question2: It took me a long time to get my TMo settings setup on my PDA2K and I don't want to go thru that again. Is there a way to backup those settings so that they can be auto-configured at a later time? I read about making a personalsettings.CAB but haven't done it yet.
Thanks,
Tom
MDAIIIUser said:
TPdisabled can't be set off, its either run or not run. So dump it and you wont have a problem
Click to expand...
Click to collapse
Thanks! I take it it should be at the beginning of the config file so that I can access it. Correct?
q1)
Well the short of "why not use backup" is you can if you feel that:
1) Restoring Regedit values from a lower rom version
2) Restoring system applications form a lower rom version such as BT
are called for, wanted or even needed.
I fail to see that point as a upgrade is an upgrade and a backup is a backup. Now you could do a restore of your system data also (which you could also sync and that would be clean
Q2)
Most fo those settings are part of T-mobile.cabs found in Extrom, the rest would have been reg entries that you are going to have to hunt for and copy.
So sorry no way around reading the other thread (personalsettings.CAB)
MDAIIIUser - Maybe I should state what I'm trying to accomplish and you could give me a clue as to how to do it. A couple days ago I upgraded by BT on my PDA2K (generic from Expansys) to 1.0.0.3900 (or what ever the latest is) and I'm currently looking at upgrading my radio to 1.12, but that would require a hard reset. I'm not in the mood to go thru all the program installs and SMS/MMS tweaking again, so I'm trying to figure out the best way to get all my programs and configurations back after the hard reset. I thought by incorporating the personalsettings.cab (for my Tmo settings) and your method I would be up and running pretty quickly. Yes? I have Sprite Backup, but I'm not sure if that's going to overwrite anything after the radio upgrade????
Thoughts?
Thanks!
Well my logic (that could be wrong) would say that a restore of your backup would get you to were you are now.
That you would need a restore as you have to do a hard reset after the 1.12 radion install.
But I can't answer the question will the radio be restored as well,
I don't know, I don't know the settings in the backup application, so am sorry I will have to let somebody else answer this one.
I have uploaded a greek rom file for the htc wizard.
This ROM has a second level of protection that can not be bypassed only by CIDunlocking a phone.
After installing the ROM, uppon second boot (first boot installs ext rom then restarts) it displays a message
"This rom is intended only for devices sold by ace hellas" and freezes.
I think it searches for a valid IMEI range but I am not sure.
I am trying to find the exe file responsible for locking up the phone (using WM5 editing tools my maimach) but I have no luck yet. If someone could lend a hand I would be gratefull. Even giving me a hint (like how to edit the registry from a dumped ROM etc.)
Anyway, the file is located here.
http://dcom.teipir.gr/RUU_Prodigy_10107105_Qtek_WWE_ship_GR1.04.exe
Thanks in advance
Below, you can find instructions to customize smartdialing for recognizing characters for any language
My best man has the EXACT same problem with his Universal.
We haven't uploaded the firmware yet but can easily be downloaded through qtek.gr.
Can someone help?
It's a pitty not to be able to use the device just because he bought it outside Greece.
It's an interesting challenge after all.
Andrew, maybe you can send me a PM with what you have tried yet.
Re: I have a challenge for the xda-gurus
andrew_sh said:
After installing the ROM, uppon second boot (first boot installs ext rom then restarts) it displays a message
"This rom is intended only for devices sold by ace hellas" and freezes.
Click to expand...
Click to collapse
Check your Extended_ROM files. They might be what you are looking for. Probable workaround might be soft-resetting your device before extended_rom files are being installed, i.e. hard-reset your device now and immediately soft-reset it when you will see message "Customizing will start in 3 sec..." or something like that...
I think it searches for a valid IMEI range but I am not sure.
Click to expand...
Click to collapse
The IMEI is stored in registry within "RIL" branch, but your IMEI is not touched within traditional flashing/reflashing
A Russian fellow had done this job last year, for the S100 Greek Rom (Anansky i think was his name). The lock is not on the extended rom, but on the main OS. And if i remember well, it has an IMEI checking ytility, and another one which checks Language settings for the Language selection utility to work, but this can be changed with registry hack. Well, we are all waiting...
Re: I have a challenge for the xda-gurus
IMate->WM2k5 said:
andrew_sh said:
After installing the ROM, uppon second boot (first boot installs ext rom then restarts) it displays a message
"This rom is intended only for devices sold by ace hellas" and freezes.
Click to expand...
Click to collapse
Check your Extended_ROM files. They might be what you are looking for. Probable workaround might be soft-resetting your device before extended_rom files are being installed, i.e. hard-reset your device now and immediately soft-reset it when you will see message "Customizing will start in 3 sec..." or something like that...
I think it searches for a valid IMEI range but I am not sure.
Click to expand...
Click to collapse
The IMEI is stored in registry within "RIL" branch, but your IMEI is not touched within traditional flashing/reflashing
Click to expand...
Click to collapse
no it's not in extended ROM at least for the Universal (and sorry for posting in Wizard forum) - we tried your method from the first moment
1. No, extended rom has nothing to do with it , for sure.
2. Yes, anansky has done it before for the htc magician (my previous phone) but never revealed a howto.
@NLS
I have found a suspicious file called langbootcheck.exe which I tried deleting (with WM5 edit tools) prior to flashing my device. But then the device won't boot at all. Maybe this file is needed, or maybe I did something wrong?
If someone could at least tell me, how to edit the registry hives with the wm5 editing tools. This way I could see wich applications are executed on startup.
Re: I have a challenge for the xda-gurus
NLS said:
no it's not in extended ROM at least for the Universal (and sorry for posting in Wizard forum) - we tried your method from the first moment
Click to expand...
Click to collapse
Did you try to play with HKLM\Comm\BootCount value? To put it as 0 so it is always thinking of a just hard-resetted device?
no I didn't try that, nor the device is mine (to try)
andrew try having a 0 byte file in place of the exe - maybe it needs the file to be there but nothing to happen when it is called
maybe Ace (since I am 99.5% sure that they read xda-developers), could give us a hint on why they have done this (when nobody else did on the whole planet)...
Re: I have a challenge for the xda-gurus
IMate->WM2k5 said:
Did you try to play with HKLM\Comm\BootCount value? To put it as 0 so it is always thinking of a just hard-resetted device?
Click to expand...
Click to collapse
No, but it sounds like a good idea. That would explain why it doesn't lock up during the first boot process. But then again there is no way to change it because the os automatically reboots itself. Unless it installs a cab file from ext rom that does the trick. Do you think this might work?
NLS said:
maybe Ace (since I am 99.5% sure that they read xda-developers), could give us a hint on why they have done this (when nobody else did on the whole planet)...
Click to expand...
Click to collapse
i realy doubt it! I mean giving us a hint
I will try to replace the file with a zero-sized one. But then again I'm not even sure if it is the file responsible. I mean, that I just guessed (because the name sounded suspicious). It could be any other file. The file name could be desguized. Thats why I need to know 2 things:
1) How to edit the registry with maimach's WM5 editing tools.
2) Where is the startup configuration located i the registry
I didn't say tell us "how", I said for the to tell us "why"...
anyway...
Yeah ACE sux, well it's been really disgusting to lock the roms so we anyone who want Greek language to buy only from em. ACE think theirselves smart enough and all the other like Russian, italian, norwegian, dutch and many more who have their Qtek rom unlocked are the "stupid"...
Anyway this is a different story..
I am available to help in any way but i'm not such an expert user as you to play with the editing tools.
P.S:I see the rom is uploaded on a TEI of Piraieus server, you have any connection with teipir? I'm in the Automation.
bill_viper said:
P.S:I see the rom is uploaded on a TEI of Piraieus server, you have any connection with teipir? I'm in the Automation.
Click to expand...
Click to collapse
I'm in automation dept too! PM me!
NOone? :!: Buzz? Come on, you will make many people happy!!!!
I don't want to sound nagging but it must be very easy for you!!
I found another approach to our problem.
Instead of trying to hack the rom, I extracted some dll files needed for the greek smartdialing.
I dumped the Greek rom and followed the instructions here.
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=10204&catid=45
but used the Greek smartdialing.dll instead of the one posted above.
It worked very well. I even edited the smartdialing cab found on the ext rom and included the dll. So each time I hard reset the device, the smartdialing feature works for greek characters. I think the smartdialing can be customized just as easily for any other language, just as long as you find the .dll in your language. (For this, download a rom containing the language, and user WM5 editing tools found on xda-devs).
If someone needs it, I can upload the greek smartdialing cab to overwrite the one in your ext rom (for wizard only).
I also use AEKMAP for the internal qwerty and I find it very stable, simple and small.
So I guess there is no much point in hacking the greek rom (unless someone wants the menus customized - I don't).
how did you dumped the greek rom ?
andrew_sh said:
I found another approach to our problem.
Instead of trying to hack the rom, I extracted some dll files needed for the greek smartdialing.
I dumped the Greek rom and followed the instructions here.
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=10204&catid=45
but used the Greek smartdialing.dll instead of the one posted above.
I also use AEKMAP for the internal qwerty and I find it very stable, simple and small.
So I guess there is no much point in hacking the greek rom (unless someone wants the menus customized - I don't).
Click to expand...
Click to collapse
Awesome idea.... is there any way i can get my hands on that .cab file? And maybe on your .aek greek layout? because mine kinda sucks
Anywho, i see we are off to a good start here fellas, don't worry answers will come soon enough.
I think this deserves its own topic. Original post from Tuatara:
Hi everyone ...
Sorry, I've run out of time for providing you with an updated ROM which I wanted to have feature complete. I'm off on vacation tomorrow for 2 weeks, and can't keep working on it until I'm back.
I've been playing around with many things (adding/removing files, fixing the Midlet Manager, updating Camera, etc.) but I haven't got the ROM to the point where I feel it's 100% ready for others - but having said that, I've uploaded it to XDA Dev, and you're welcome to give it a try and see if it improves things for you.
This is MAINLY an update from Mamaich's v2a ROM, which does contain the Quantum Timing Patch, and the Performance Tweaks.
I've also made a few filesystem changes - predominantly removing the Midlet Manager (which wasn't working), applied all of the Performance Tweaks as per the thread (and a few more), changed the default startup elements to suit my tastes (at the moment), and added some useful programs and details to the ROM. (psShutXP, Running Programs, Shortcuts to missing elements, etc.)
The ROM is in /Uploads/Blue Angel/wm5_test/Tuatara_v2a_Custom.zip
Inside the ZIP file is the nk.nba file, along with the updated registry files (boot.rgu, default.rgu, and user.rgu) which have been merged in. I've unfortunately forgotten to include initflashfiles.dat in the ZIP, but that file is directly available from inside the ROM anyways.
The ZIP also contains a different EXTROM - only the missing files, camera, and midlet manager are needed now, and there is no warning about publisher on installation anymore. You can obviously customize the EXTROM cfg.txt file to your liking, and install anything and everything all at once.
Additionally the ROM itself still has some additional space for applications, so if you want to cook your own, there is some space available to add more.
Sorry I won't be able to answer any questions about this ROM, or handle issues on it for two weeks, so it's up to you if you want to try it (or just decompose it and look at the changes).
Enjoy, and I hope everything goes well.
Regards,
Robert.
Click to expand...
Click to collapse
For further information and download, visit the WiKi.
Personal thoughts: I think this ROM gives some performance boost indeed, not much, but it is noticable. Nearly every bug is fixed now, only the bluetooth disconnect issue is left. My BA is fianlly shows itself disconnected when i take it off the cradle (with the previous ROMs, it often showed that it is still connected).
Enabling SmartDialing
Hi, I've tried this ROM & this definitely faster! Thanks!
But I can't seem to enable SmartDialilng by removing the "_" from the mfc80u.dll_ and msvcr80.dll_ files for SmartDial will start to work? These 2 files are missing from this ROM but even after I've copied these 2 files into the \Windows folder, SmartDialing still doesn't work. Any ideas?
Re: Enabling SmartDialing
paullim29 said:
Hi, I've tried this ROM & this definitely faster! Thanks!
But I can't seem to enable SmartDialilng by removing the "_" from the mfc80u.dll_ and msvcr80.dll_ files for SmartDial will start to work? These 2 files are missing from this ROM but even after I've copied these 2 files into the \Windows folder, SmartDialing still doesn't work. Any ideas?
Click to expand...
Click to collapse
I should take a look at one of the early versions of "New menu for WM5" (anything below 1.0.0 beta). Does anyone still have the CABs?
Re: Enabling SmartDialing
KTamas said:
paullim29 said:
Hi, I've tried this ROM & this definitely faster! Thanks!
But I can't seem to enable SmartDialilng by removing the "_" from the mfc80u.dll_ and msvcr80.dll_ files for SmartDial will start to work? These 2 files are missing from this ROM but even after I've copied these 2 files into the \Windows folder, SmartDialing still doesn't work. Any ideas?
Click to expand...
Click to collapse
I should take a look at one of the early versions of "New menu for WM5" (anything below 1.0.0 beta). Does anyone still have the CABs?
Click to expand...
Click to collapse
Here you go.
paullim29. These correct the problem for me.
Re: Enabling SmartDialing
rschell said:
KTamas said:
paullim29 said:
Hi, I've tried this ROM & this definitely faster! Thanks!
But I can't seem to enable SmartDialilng by removing the "_" from the mfc80u.dll_ and msvcr80.dll_ files for SmartDial will start to work? These 2 files are missing from this ROM but even after I've copied these 2 files into the \Windows folder, SmartDialing still doesn't work. Any ideas?
Click to expand...
Click to collapse
I should take a look at one of the early versions of "New menu for WM5" (anything below 1.0.0 beta). Does anyone still have the CABs?
Click to expand...
Click to collapse
Here you go.
paullim29. These correct the problem for me.
Click to expand...
Click to collapse
Created a cab file and added to WiKi. Thanks.
Missing MMS client?
Hi,
I s to be missing my MMS client. I see an option for the MMS configuration but am missing the MMS application? Anyone facing this issue?
Re: Missing MMS client?
deepakr said:
Hi,
I s to be missing my MMS client. I see an option for the MMS configuration but am missing the MMS application? Anyone facing this issue?
Click to expand...
Click to collapse
Hmm it seems that MMS is broken in this ROM indeed. Will add to WiKi.
mediaplayer still have a problem for playing in background
anybody solve this problem?
a771la said:
mediaplayer still have a problem for playing in background
anybody solve this problem?
Click to expand...
Click to collapse
You should try a different program, such as GSPlayer or TCPMP.
ok... i use TCPMP
but i want to know mediaplayer don't work on this rom
ok himalaya's rom work for me
I downloaded the new Rom and having a little trouble trying to download to my SX66. I have upgraded and downgraded the WM5 on my SX66 several times. I was wondering since the rom file is nba instead of nbf does that make a huge difference. I admit have have not messed around with my device data cause I find that a little complicated. I usaully use the MA_Upgrade cause I don't have to tweak too much. Any suggestions?
Mr Chicago said:
I downloaded the new Rom and having a little trouble trying to download to my SX66. I have upgraded and downgraded the WM5 on my SX66 several times. I was wondering since the rom file is nba instead of nbf does that make a huge difference. I admit have have not messed around with my device data cause I find that a little complicated. I usaully use the MA_Upgrade cause I don't have to tweak too much. Any suggestions?
Click to expand...
Click to collapse
In this case, you should use the harder way. Read step 4 of the upgrading process (see wiki) to upgrade via BaUpgradeUt.exe.
Mr Chicago said:
I downloaded the new Rom and having a little trouble trying to download to my SX66. I have upgraded and downgraded the WM5 on my SX66 several times. I was wondering since the rom file is nba instead of nbf does that make a huge difference. I admit have have not messed around with my device data cause I find that a little complicated. I usaully use the MA_Upgrade cause I don't have to tweak too much. Any suggestions?
Click to expand...
Click to collapse
The nk.nba file needs to be converted back to nk.nbf regardless of whether you use MA_Upgrade or BA_Upgrade. I use MA_Upgrade. There is an modelid entry of the USER.rgu that should be changed to PH20B1. I'm not sure whether these *.rgu files need to be copied to the \windows dir or added back into the nk.nba file. Any thoughts KTamas, i'm thinking the later.
rschell said:
Mr Chicago said:
I downloaded the new Rom and having a little trouble trying to download to my SX66. I have upgraded and downgraded the WM5 on my SX66 several times. I was wondering since the rom file is nba instead of nbf does that make a huge difference. I admit have have not messed around with my device data cause I find that a little complicated. I usaully use the MA_Upgrade cause I don't have to tweak too much. Any suggestions?
Click to expand...
Click to collapse
The nk.nba file needs to be converted back to nk.nbf regardless of whether you use MA_Upgrade or BA_Upgrade. I use MA_Upgrade. There is an modelid entry of the USER.rgu that should be changed to PH20B1. I'm not sure whether these *.rgu files need to be copied to the \windows dir or added back into the nk.nba file. Any thoughts KTamas, i'm thinking the later.
Click to expand...
Click to collapse
You don't have to do anything with RGU files at all. You need to use xda3nbftool (with editfix.bat if you want) to patch the ROM.
Hi,
just upgraded to new rom and noticed i can't sync calender and contacts.
anybody has the same?
Gr
Paul
kluggie56 said:
Hi,
just upgraded to new rom and noticed i can't sync calender and contacts.
anybody has the same?
Gr
Paul
Click to expand...
Click to collapse
Both works well for me...What error exactly do you get?
KTamas said:
kluggie56 said:
Hi,
just upgraded to new rom and noticed i can't sync calender and contacts.
anybody has the same?
Gr
Paul
Click to expand...
Click to collapse
Both works well for me...What error exactly do you get?
Click to expand...
Click to collapse
Nothing....that's strange. I'ts syncing, but Outlook has all data and my BA nothing. I've tryed reinstalling all, but no luck, even reinstalled my BA. No luck sofar.
Sorry,
Activesync gives the following message,
There is not enough free memory on tour device to synchronise information. Close programs that are free to up memory, or restart the device.
Ondersteuningscode 8007000e
gr
Paul
Sorry,
Activesync gives the following message,
There is not enough free memory on tour device to synchronise information. Close programs that are running to free up memory, or restart the device.
Ondersteuningscode 8007000e
gr
Paul
Hey whats up guys, just a curious question I have regarding the comm manager in WM5. When using stock version of WM5 2.26 from T-Mobile on my MDA and using a program called Navizon with my GPS, I am able to calcualte a lot of Wi-Fi Access points and Cell Phone towers using the Comm Manager supplied with the stock. I am talking about, on my regular commute about 400-600 AP's and varied on towers. I have upgraded my Rom many of times with different variations of WM5 and WM6 and also reflashed my Radio rom with many different radio versions, with WM5 stock, customs, and WM6, and each came with a different comm manager than stock, and after doing so I am now only able to gain maybe 7 AP's on my normal commute but Cellphone Towers are good.
So my question is, is it possible to get the comm manager from stock WM5 and install it within any custom roms already to created to see if that really has something to do with why I am not gaining any data while using this program, and if that might not be the case, then what exactly could be the problem when trying to collect the data at all. Thanks in advance.
Man, over 75 views and not a single yest it can be done or no it cannot be done, come on guys somebody gots to know a simple yes or no answer!
Hi,
If you mean the "CommManager.exe" file, yes it can be done.
I'm building my own WM6 rom (orwel based).
As I liked better the CommManager.exe from the Tmobile 2.26 stockROM, I installed it.
Simply extract the file from the CommManager.exe T-Mobile ROM and copy it over to an already installed rom or integrate it in your new rom.
You also might want to tune the Software\HTC\CommManager registry key to make sure that you have 8 buttons on it, instead of the regular 7 of the other roms.
eluth.
eluth said:
Hi,
If you mean the "CommManager.exe" file, yes it can be done.
I'm building my own WM6 rom (orwel based).
As I liked better the CommManager.exe from the Tmobile 2.26 stockROM, I installed it.
Simply extract the file from the CommManager.exe T-Mobile ROM and copy it over to an already installed rom or integrate it in your new rom.
You also might want to tune the Software\HTC\CommManager registry key to make sure that you have 8 buttons on it, instead of the regular 7 of the other roms.
eluth.
Click to expand...
Click to collapse
Hey eluth, thanks for the reply man. I didnt realize it was that simple, but a quick question, is their a tutorial you can point me to as far as extracting the .exe file, or do I have to flash rom with stock, transfer over to pc, reflash with custom rom, transfer back over. Basically Im looking for a simpler way of extracting than the above, thanks in advance.
Nice advice!
I've done it!
Great - I see my loving 8-buttons!!!
I would also love to have it again. Can somebody share old commanager.exe and reg. file here?
I changed the key to show 8 and it says "Comm Manager supports 7 functions at most!"
Any ideas?
I guess what I am asking is what is the 8th button for and how do I go about mapping it in (if that's even possible)?
trojan9x said:
I changed the key to show 8 and it says "Comm Manager supports 7 functions at most!"
Any ideas?
Click to expand...
Click to collapse
It looks like you have a 7-button manager, you need an 8-button.
Try this: (attach)
(the 8th entry in the registry should contain one default value - "IR", similar to 7 others)
P.S.: do not pay attension on the file size - it's just compressed by upx
Thanks fellaz, hopes this fixes my issue with Navizon.
eluth said:
Hi,
If you mean the "CommManager.exe" file, yes it can be done.
I'm building my own WM6 rom (orwel based).
As I liked better the CommManager.exe from the Tmobile 2.26 stockROM, I installed it.
Simply extract the file from the CommManager.exe T-Mobile ROM and copy it over to an already installed rom or integrate it in your new rom.
You also might want to tune the Software\HTC\CommManager registry key to make sure that you have 8 buttons on it, instead of the regular 7 of the other roms.
eluth.
Click to expand...
Click to collapse
Thanks for this post! I have been looking for this for months!!!
It did not work for me. It had the same 7 buttons on top of 8 pieces of text. The file size was considerably smaller than my 7 button commmanager.exe as well.
trojan9x said:
It did not work for me. It had the same 7 buttons on top of 8 pieces of text. The file size was considerably smaller than my 7 button commmanager.exe as well.
Click to expand...
Click to collapse
(the 8th entry in the registry should contain one default value - "IR", similar to 7 others)
Will that create the button as well? When Comm manager loaded it still had only 7 graphical buttons on top of 8 pieces of text.
I tried and it worked... thank you
cab file for easy install
I didn't test it 'cose I allready have it...
Did anybody tried to install the VOIP.cab too ?
Funny thing is that most users reports registry entry started from 1 but mine started from 0 (phone entry, in WM6 MB edition)? I suggest all not to use cab files, but manually perform registry changes. Adding VOIP button is OK, I don't have error in settings menu I used to have without it.
naboleo said:
Did anybody tried to install the VOIP.cab too ?
Click to expand...
Click to collapse
yes, but no change
Hello all. Just got my phone on Orange and I like it. I have been a Mac-user for the past 12 years so I am used to not tweaking my gadgets. Can someone explain how I install the CABs onto my Kaiser via either my G5 iMac or my intel Macbook. Many thanks
do'h not very sure, but you might want to try the missing sync, grab the latest version, it now supports win5 and 6. basically that's what you need to synch your mac and PDA, but not very sure if you can install 'em through it though
Now how do I find the installed CAB
OK I have downloaded a CAB onto the Kaiser via Missing Sync. (HTC album mui 0419.cab) So how do I now find it on the phone and activate it or any other CAB?
Thanks again
not that hard
I get that you're new, I am too, but try to figure this stuff out by yourself.
Bluetooth should work for getting files onto the phone (my docs/bluetooth)
When you sync to the phone, the PC version is that you see the phone on the schema/folder tree and can choose where to put it.
When you find the cab file, opening it will install it. Generally try to put system specific things on main memory and things like games on a storage card.
Look at some must have threads to find programs that you like and after you figure it out try a hard reset and reinstall things. That will let you keep a stable device.
As for ROMS, I would be careful of even thinking about flashing on a mac unless you find a thread telling you how to do it, you don't want a bricked device.
Remember to search the forums - it's worth your time.
Just mount the kaiser with missing sync. After that, drag and drop the file to a location that you can remember. Once you do that, just go to the file explorer in the kaiser, locate the file, and click. You should be all set.
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
from what I can remember, Missing Sync is really broken at the moment. (under 10.5).
To install a cab, you just use the tab next to syncronize, what is it, the file tab or somehing?
if it's a .cab, it will be loaded automatically. But make sure there's no spaces/irregular characters on the .cab, otherwise, it won't load the installation, and possibly, the file will not be uploaded at all. I think this is a missing sync bug.
Nope, you're going to have to pull the .CAB out of the .EXE file
jakontil said:
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
Click to expand...
Click to collapse
chenga said:
Nope, you're going to have to pull the .CAB out of the .EXE file
Click to expand...
Click to collapse
hi chenga, mind to point me how to do so? because i am going to lose my XP system very soon