SOMEONE PLEASE HELP ME!
I tried to upgrade the firmware in a customers O2 XDA IIs via active sync with bluetooth and it just stopped.
i disconnected it and tried to reset it but all it shows on the unlit screen is "Serial v2.07". I'm in Africa no where near an o2 service centre and I cant afford to buy another XDA for the guy!
Pls tell me what i can do.
Also when istarted the upgrade proceure from the update file i downloaded from the o2 web site, it stopped when i clicked upgrade and it said "Getting phone information"
How can i get the phone out of this serial mode pls??
thanks to anybody that can rescue me!!!!!!!!!!!!!!11 :!: :!:
Have a read of wiki (link in my signature)
YOu are in boot loader (White screen) put the device back in the cradle and rerun the upgrade.
(Thread moved to the BA section from Upgrading...)
Related
I have upgraded my i-mate PDA2K with de file (from i-mate web site) RUU172126WWE_imate.exe ,but I had problem with the phone ,it shuted down,and I couldn't turn it on , the black i-mate screen showed v2.02 and sometime nothing !!!so I decided to re-install de update file. This second update process stops with "ERROR 105 – this update is not desigtned for your dvice".i tried many times with no success at all, always the same ERROR 101.connection error... the power light is red!!!
Could anybody help me to fix this error? I would like to upgrade to the latest version and get my PDA up and everything running. plzzzz help me
Thanks a lot.
Try using a rom that is for your device for all others will turn your phone into a paper wheight as you have noticed.
you need to download a rom that is from your carrier and start again.
Wiki
thanx but my problem that i can't connect my pda2k on the cardl!!!the sync can't find it
any one can help me - - there is no service center in france!!
Download a rom that is from your carrirer and your device, ( You say its a I-mate) you also say you are in france and I know of no frensh roms.
As you are stuck in bootloader, run the ship.exe as is, it should find the device.
Look nobody can help you if you tell us nothing. What do you mean by card. Have you read anything in wiki ?
XDA IIs stuck in boot loader
i am also stuck in bootloader and sysnc cant detect my xda. i hav tried upgrade from nb1 file from mda but getting section 3 error upgrade not allowed. i need xda IIs nb1 file to use xda card boot. can anyone help me and put his xda IIs rom on ftp or pm me.
thanks
Re: XDA IIs stuck in boot loader
barlas said:
i am also stuck in bootloader and sysnc cant detect my xda. i hav tried upgrade from nb1 file from mda but getting section 3 error upgrade not allowed. i need xda IIs nb1 file to use xda card boot. can anyone help me and put his xda IIs rom on ftp or pm me.
thanks
Click to expand...
Click to collapse
We really need more info. This is like asking to a mechanic: My car is broken, can you replace the engine...
So: What PDA do you have, what ROM versions installed, what version did you try to install, etc. etc.
But more importantly, have you read wiki?
Follow the link in my sig...it's all there.
i tried to install o2 rom 1.31 and previously there was 1.06. bootloader is v 2.06. now when i switch it on it is in serial mode. i hav tried to install shiped roms but no one detects my pda on sysncronous. i hav tried to use mda III rom using sd card but it says section 3 upgrade not alowed. tried o2 himaliye nb1 file it says trying himaliya upgrade on blueangle not alowed. this means i need nb1 file of XDA IIs. thanks
Hello
I have an XDAII1 PH10C
Ive had a few issues with TomTom etc and have downloaded an update or two - including the official O2 update.
Unfortunately me XDA keeps freezing and Im getting pretty upset with having paid £400 for nothing.
When I did the O2 upgrage I got the following :-
The file "rofs_target.zip" was not copied sucesfully. To re-install, you will need to get the source .cab file again. Continue with Setup?
Ive even let both batteries run down completely in the hope of restoring original O2 set-up - but I get a Country Error code when I re-install the upgrade.
My hardware settings are :
ROM 1.11.00 WWE
Date 01/27/05
Radio 1.04.00
Protocol 1337.42
ExtROM [this is blank]
Ive got the chance of returning to O2 support to try and sort problem, but I need original O2 set-up or they will charge me £96+vat for re-setting XDA.
PLEASE - does anyone have solution for solving [blank] ExtROM issue or the original O2 settings to solve the repair bill problem.
Thanks
Paul
what types of sd card are you using
sometimes i get that error as well but all i have to do is re run the no id app and it works 2nd time
I have a PQ1 1GB card, but dont have that inserted when I download updates or reset PDA.
Paul
re-run the O2 update if it errors with country ID error then just start it back up again it should then work.
It looks from the specs you posted your using the latest 1.04 radio. i assume you installed PUGs new update version ?
Hi
Yes I tried Pugs version, and the ExtROM was still blank.
So, Ive gone back to an O2 version - and the ExtROM is still blank.
I need to reassure myself that I have ONLY O2 software on the XDA before I send it in for repair as it will be free - if they find any other stuff on there they will charge me c£100.
Paul
PS Im still having major TT5 issues. Today it froze and I had to hard reset and then tried to re-install TT5. Only to be told it was already there and did I wish to overite. When I said yes, the today screen came up and theres no sign of TT5 anywhere.
Bloody XDAIIi is doing my head in.
Have you downloaded the latest O2 ROM from the XDA2i mini site?
When you are installing it have you got your anti-virus software turned off?
Yep - O2 download.
Yep - AntiVirus, Internet Security & Anti-Spam all Off.
Ive just done the download again and still got the rofs_target.zip message.
Paul
Hi there, have you tried unlocking the extended rom by any chance? This will cause the storage to be locked and cause the extended rom to stop installing past a certain point (Happened to me). There are instructions on this site on how to unlock it, do a search for unlock and my screen name (pug).
Hope this works.
Pug
I found the link you refer to and downloaded the exttools.200.exe and ran it on XDA.
I then tried the official O2 update again and the XDA has FROZEN !!!!
It is now stuck on Serial v1.01 and WILL NOT alter no matter what I do.
Ive soft-reset, hard-reset and done the soft-off-action button thing - and nothing.
When I place in cradle, the PC plays a tune as if to say it knows the XDA has been connected, but I cannot get activesync to recognise the XDA.
Now what can I do please ?
Im particularly worried that I now cant remove the exttools.200.exe from the XDA and will have to return it for repair with that dodgy software on there - they will definately be charging me for a repair now.
What can anyone suggest please ?????
Paul
i have blue angel O2 XDA IIs.i downloaded "Xda IIs ROM upgrade Jun 2005 (ENG)" from http://myxda.com.i have lost my cable(cradle).
So i tried to upgrade the device by connecting bluetooth active synchronizer.upgrade started but after some time it says on pc that connection to the device has lost. and now my device is not booting up "serial v2.07" is showing on the screen.
Plz tell is there any way to restore my device to the previous version without the cradle or cable. Bcz i lives in the remote area a cable can not be available here.
Plz help.
Thnx in advance
yep it can be done.
u will need help from someone to load wm2k3_se june update on their pda first, then save that new update image to an SD card for ya.
so then u can restore it on yours.
where did u buy this device from?
imatrix
Hi all PDA and HTC lovers.I have an ALPINE which is stuck on "windows mobile" screen. Thats because I was upgrading a new rom but during upgrade connection between my PDA and my PC was interrupted then I got many error messages on screen but it was too late now I cant get my ALPINE into bootloader mode and I only can see "windows mobile" screen when I plugged charger.Is it possible to make it run my alpine again. I would be very pleased if you could help.
Buzz..... it would be very good if you can help me coz I trust you so much you r the best
Please contact me [email protected]
Stuck on window mobile screen
I got similar problem on XDA Exec last week and fixed it. I do not know whether the steps will help on you XDA IIi or not.
I was upgrading the XDA Exec to a newer ROM version and keep getting country error code. Whatever I did caused the device to stuck on window mobile screen. I simply put the device into the cradle after reseting it. The screen still shown the window mobile image. I ran the ROM update program again (I think it is MaUpgradeUt_noID.exe). It showed an error but I ran it again withthout taking my device out of the cradle. It run sucessful the second time.
I notice that when the program runs, it close ActiveSync application from your desktop and the device screen turns to black screen with some simple texts on it.
I hope this help.
Selcuk, have you solved ur IIi yet? and which Rom were you trying to install? what was the reason of getting the upgrade interupted? I can upload the PUGs rom if you want.
Sidd
sidd said:
Selcuk, have you solved ur IIi yet? and which Rom were you trying to install? what was the reason of getting the upgrade interupted? I can upload the PUGs rom if you want.
Sidd
Click to expand...
Click to collapse
hi my fellow Siddiqui I couldnt solve that problem yet.And I tried to upgrade it again and couldnt manage to do that **** upgade please help me...Do I need to send it to HTC to Dubai? and I dont know how much does it cost ? can u please tell me if u know more about this topic?
Hi,
which Rom were you trying to install? what was the reason of getting the upgrade interupted/corrupted? I can upload the PUGs rom (as I am using it and its fantastic) if you want with the instructions.
Sidd
I was trying to upgrade to Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed
rom but I couldnt. Can you please upload any other which will help me to save my alpine if possible....and I can try PUGs rom thnks so much
PM me your email address.
thansk so much sidd
Thanks so much my fellow Maarij I just downloaded files and I hope it will work Allah (c.c) bless you
thx so much but dudes I'm still in trouble please help me
it doesnt work ...
do I need to send it to HTC to Dubai can they fix an alpine that has a bricked rom....noow I neeed to shout pleasee heeeeellllp
thx so much but dudes I'm still in trouble please help me
it doesnt work ...
do I need to send it to HTC to Dubai can they fix an alpine that has a bricked rom....noow I neeed to shout pleasee heeeeellllp
please help me
I still cant find how to save my be loved alpine
Selcuk did you receive my email earlier this week??
Sidd
sorry
sorry Sidd I saw it right now coz I forgot check my mailbox actually my pc automatically downloaded it and marked as read thats why I couldnt notice your mail and I sent u back a reply
i have downloaded update rom v 1.40 form the imate site. and connected my device to my PC via bluetooth link and sync through active sync4.5 and then run the update setup setup found the device v 1.22 and ready to update it to v1.4. and then after the restart (which the setup automaticlly does) a display with out back light appers which says (Serial v2.07). i tried to soft reset and hard reset but nothing happens, on the short i am unable to load os on my device and stucked to this display (Serial v2.07). i do not have data cable or cradel. any solution Please.
****
Moderator edit
Thread moved from news section to Blue Angel Upgrading
****
did you find a solution
because i have the same problem with mine
soegaard71 said:
because i have the same problem with mine
Click to expand...
Click to collapse
I have the same problem but i'am with mda III T-mobile can Any one help me ??????
well i do not want to offend you but you are too stupid to even try the upgrade over bluetooth, the upgrade only can be performed over cable
Get a cradle or a data cable and update according to descriptions in the Wiki. You're in bootloader mode, you should be able to resume the update from here, but ofcourse only by cable.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
worst case scenario is to recover your device using mtty, search the forums for the method
Or you can find it in "the guide" which can be found within the wiki (near xplode ROM)
I really want to improve the wiki - but the ****ing time