I have upgraded my i-mate PDA2K with de file (from i-mate web site) RUU172126WWE_imate.exe ,but I had problem with the phone ,it shuted down,and I couldn't turn it on , the black i-mate screen showed v2.02 and sometime nothing !!!so I decided to re-install de update file. This second update process stops with "ERROR 105 – this update is not desigtned for your dvice".i tried many times with no success at all, always the same ERROR 101.connection error... the power light is red!!!
Could anybody help me to fix this error? I would like to upgrade to the latest version and get my PDA up and everything running. plzzzz help me
Thanks a lot.
Try using a rom that is for your device for all others will turn your phone into a paper wheight as you have noticed.
you need to download a rom that is from your carrier and start again.
Wiki
thanx but my problem that i can't connect my pda2k on the cardl!!!the sync can't find it
any one can help me - - there is no service center in france!!
Download a rom that is from your carrirer and your device, ( You say its a I-mate) you also say you are in france and I know of no frensh roms.
As you are stuck in bootloader, run the ship.exe as is, it should find the device.
Look nobody can help you if you tell us nothing. What do you mean by card. Have you read anything in wiki ?
XDA IIs stuck in boot loader
i am also stuck in bootloader and sysnc cant detect my xda. i hav tried upgrade from nb1 file from mda but getting section 3 error upgrade not allowed. i need xda IIs nb1 file to use xda card boot. can anyone help me and put his xda IIs rom on ftp or pm me.
thanks
Re: XDA IIs stuck in boot loader
barlas said:
i am also stuck in bootloader and sysnc cant detect my xda. i hav tried upgrade from nb1 file from mda but getting section 3 error upgrade not allowed. i need xda IIs nb1 file to use xda card boot. can anyone help me and put his xda IIs rom on ftp or pm me.
thanks
Click to expand...
Click to collapse
We really need more info. This is like asking to a mechanic: My car is broken, can you replace the engine...
So: What PDA do you have, what ROM versions installed, what version did you try to install, etc. etc.
But more importantly, have you read wiki?
Follow the link in my sig...it's all there.
i tried to install o2 rom 1.31 and previously there was 1.06. bootloader is v 2.06. now when i switch it on it is in serial mode. i hav tried to install shiped roms but no one detects my pda on sysncronous. i hav tried to use mda III rom using sd card but it says section 3 upgrade not alowed. tried o2 himaliye nb1 file it says trying himaliya upgrade on blueangle not alowed. this means i need nb1 file of XDA IIs. thanks
Related
Hello,
I was today handed a fried XDA 2.
My boss had attemted to flash it and it failed for whatever reason.
Now i will say from the outset that i have only ever flashed my XDA1 with a XDA-Developers ROM and it was a breeze.
The ROM file HE flashed with was called.
Xda_II_Upgrade_v16050.exe
Now when you switch the thing on.. all you get is a a small amount of txt saying
'Serial'
'v1.06'
and nothing else..
What have i done? Well i have sifted through the articles on here.. and found this rom
XDA-developers-SER-v12.exe
I have installed this on an SD card using xdatools.. WHOLESALE.. i.e. no moding of the files...
I have looked at 'http://wiki.xda-developers.com/wiki/HimalayaRomFlashing'
but as i can boot into the device.. i cant get the info it requires.
I am open to any and all help. And I'll even buy you a pint!
I am really at a lose.
Thanks in advance Guys and Girls.
It may not be as bad as you think.
It is in bootloader mode - currently in Serial mode and if you put it in a cradle connected to a PC (with ActiveSync installed) the bootloader should change to USB v 1.06. From this point you should be able to load a normal ROM from the manufacturer.
I have an i-mate, so am not sure what the current ROM version for the XDA II is, but I'm sure others will chime in with this information.
I upgraded to this version, not knowing I already had this loaded. You need to check the extROM version before upgrading as this appears to be way the official upgrades seem to change.
I had no problems and it was done through the Active Sync process
The file can be found here if you haven't already got it... http://www.my-xda.com/downloads.html
Try it again. It does take about 90 mins.
Regards
Nope... Nadda... Zip... Zilch.
Roit...
When i dock the pesky thing in the USB craddle.. it does display USB and v.1.06.
Activesync shows NO sign of knowing the XDA is there.
The ROM found at http://www.my-xda.com/downloads.html as suggested by flintanis fails with a ERROR 100: MODEL ID ERROR.
BRosenow what do you mean by 'load a normal ROM form the manufacturer' is that not what i have just tried?
Once again a pint for all contributors.. and my first born to the dude with the solution.
Cheers.
ActriveSync won't activate because it's in Boot loader mode but you can download the latest ROM Update from the manufacturer or cellphone service provider and load that to flash the ROM and complete the process.
If it's a UK XDAII, get the update at www.my-xda.com .
It appears the previous user tried to flash it with a ROM from another manufacturer (Q-Tek/MDA II/i-mate). You are now receiving a Model/Country ID error. I have not experienced this myself, but I have read posts in this forum on how to fix it. Do a search and I bet you will find it.
- OR - any user who has experienced this and successfully flashed his ROM could chime in here and give jonathh some advice . . .
After much ado about nothing..
i have returned to again fix this XDA2 (the joys of pesky FT employment; make your minds up guys.. you want this XDA2 fixed or not?)
Right i *think* with quite a high level of certainty that the XDA2 currently in my grubby mitts was purchased in Malaysia/Sinapore.
Now.. am i correct in that flashing it Xda_II_Upgrade_v16050.exe from http://www.my-xda.com/downloads.html
Would cuase the problem i have now.. or at the very least wont go on on the XDA2 now because it is a UK ROM and a Malaysia XDA2?
I have flicked thru the pages on here.. and i cant seen to see how to solve this!!
PPllleeasseee help
*sobs, and gently rocks back and fourth*
I think there is a bit of confusion going on in this post!
The first ROM you tried (XDA-developers-SER-v12.exe) is for XDA1 - NOT XDA2.
The best place to get the latest UK XDA2 ROM is http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm
and i *believe* that the place to download the Malaysia ROM is
http://www.myxda.com/XdaII/serviceandsupport/template/XdaIISoftwareUpgrade.vm (note the absence of the '-' between my and xda...this is the Asian O2 website)
See if the ROM from either of those sites will install
Hope that helps!
How about scrambled?
Ok, thanks 'pope'
*none* of the roms suggest work..
Xda_II_Upgrade_v16050.exe reports unknown country code..
and the recently suggested
Xda_II_LaunchROM_v10311.exe just sticks on the 'checking for information' left it for over an hour! BUT doesn't report unknown country code like the other one.
I cant get the XDA2 rom from the Asia site, as after i registerd my XDA2 it reports i dont need the damn update... anyone got it already?
I have extracted the core files from both these exe's and tried to copy them to an SD card(the NBF fille) using XDAtools.. and xdatools report the files are invalid.
I am lost and clueless!
HHHEEELLLPPPPP
Well that didn't work...
I got my grimmy grits on another XDA2 and using XDAtools sucked the ROM off of that.. and then.. again using XDAtools squirtted it out onto an SD card..
But i am unsure what i have to do then? is this latest approach possible??
Comments welcome![/code]
Love to help… but
My UK O2 XDA II has exactly the same problem. I died whilst flashing the UK O2 1.60 ROM, and now I can't do anything with it. Identical symptoms. Identical complete lack of success (eight hours and counting).
How can I find out the country ID of my device when my XDAII is dead?
mark8barnes said:
Love to help… but
My UK O2 XDA II has exactly the same problem. I died whilst flashing the UK O2 1.60 ROM, and now I can't do anything with it. Identical symptoms. Identical complete lack of success (eight hours and counting).
How can I find out the country ID of my device when my XDAII is dead?
Click to expand...
Click to collapse
O2 will fix this for you if it happened as a result of flashing with their rom.
By they way, in case anyone was concerned when I said " I died whilst flashing the UK ROM", I did of course mean "it died..." ;-)
But I have solved my own problem! How come you can spend hours trying to find a solution, and as soon as you ask for help, you sort it out straight away??!!
I hope this works for you if you're still struggling.
1) Download the latest i_Mate ROM from http://www.clubimate.com/Support/RUU172126WWE_imate.exe
2) Download the XDAII Rom Editor from http://wiki.xda-developers.com/uploads/ER2003Edit_1_2_20.msi
3) Extract the files from the IMate ROM, and use the ROM Editor to change the Operator to 02. Get the instructions here and the password here
4) Flash the ROM as normal. It worked for me You could experiment with using the O2 extended ROM files rather than the T-Mobile ones, but I was just glad to get the thing working. Perhaps I'll feel braver later.
I did feel braver, and copied the O2 Cabs into the IMate Extended ROM file. Then I deleted the IMate cabs I didn't want, modified config.txt and prayed! Everything seems to have gone fine, and I'm now re-installing all the software. Already there seems to be a significant speed increase over 1.60.
I'd recommend taking this step before you flash the ROM, rather than doing it twice like I did.
mark8barnes is the man!
I didn't do the mods.. just as per your original post.. and it worked!! Yay
Thanks mate you da man!
Now i do have a query tho.. if i did suck the rom off using XDATools.. how would i get it bck on again?
Cheers all you guys..
Fried XDA
Hello Mark
Me too, I flashed my ROM with the UK version with the same result.
The link to the iMate ROM no longer exists, can you help me please. I'm a real novice at this.
Thank you
Ben (Aust)
mark8barnes said:
By they way, in case anyone was concerned when I said " I died whilst flashing the UK ROM", I did of course mean "it died..." ;-)
But I have solved my own problem! How come you can spend hours trying to find a solution, and as soon as you ask for help, you sort it out straight away??!!
I hope this works for you if you're still struggling.
1) Download the latest i_Mate ROM from http://www.clubimate.com/Support/RUU172126WWE_imate.exe
2) Download the XDAII Rom Editor from http://wiki.xda-developers.com/uploads/ER2003Edit_1_2_20.msi
3) Extract the files from the IMate ROM, and use the ROM Editor to change the Operator to 02. Get the instructions here and the password here
4) Flash the ROM as normal. It worked for me You could experiment with using the O2 extended ROM files rather than the T-Mobile ones, but I was just glad to get the thing working. Perhaps I'll feel braver later.
Click to expand...
Click to collapse
Isn't there anybody who can give me his xda IIs rom image. i am stuck in bootloader and cant syncronise with pc so the only way i can make it working is using sd card method. so help me to dump some xdaIIs image on sd card.
thanks
No need for that.
Search the forum or see FAQ in wiki.
i hav read everything and its now 3 weeks. i hav tried the ship roms aswell but nothing can detect my xda IIs.when i put it on cradle it changes serial to usb but still not detected my pc. ship rom gives error 101 connection error. i hav tried mda III rom using sd card but getting section 3 upgrade not allowed. means i need xda to sd rom
plzzzzzzz help meeee
I've tried to upgrade my XDA 2s using PDA2k WWE 14000 176 11 CDL. I bought mine in Singapore. And using it in Indonesia.
First I just run the BaUpgradeUt and it says Device ID error. Then edit the RUU.conf. Run it again and still get Device ID error.
Second, I tried Using MaUpgradeUt_noID and it worked fine for the Radio but not for ROM and ExtROM. Then I put Radio.nbf and MS.nbf into different folder leaving only nk.nbf, EnterBL, RUU.conf, RUU.dll, GetDeviceData, MaUpgradeUt_noID in the upgrade folder. I try to run di MaUpgradeUt_noID and it stop when the progress bar reach 41%. It says ERROR 112: CE ROM UPDATE ERROR. Same thing with ExtROM.
Plz guys I need help.....
Also my bootloader is 2.07. Sorry I forgot to write it.
Any help would be appreciated guys......need urgent help here..plz
Read wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Use the first method.
TheLastOne said:
Read wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Use the first method.
Click to expand...
Click to collapse
still not working. I cannot use GetDeviceId coz it's only stuck in bootloader 2.07. Could you give me another way to revive this dead xda2s.
thx b4.
Flash it with the First Method (Quick/Easy) as this does not need the info out of devicedata.
Hi adbradwell,
Since you bought your device from Singapore, why don't you use the official Asia Upgrade to 1.40, since it is out. Get the shipped full exe from here. At least you can be certain you would not get any device / country error. Just my two cents worth tho. Cheers ^^
Btw, if you are stuck in bootloader mode, just perform a hard/soft reset to get out of it.
Hello all,
Can anyone tell me how to upgrade the ROM for O2 MINI XDA S.
I have downloaded the ftp file from ftp. Presently i have German OS installed in my XDA. I want to chage it to English.
Pleasse tell me the procedure of how to upgrade the ROM. I tried to search in wiki, but it is still not available.
Your help will be freatly appreciated !!
cheers..byee
I have the same problem, want to upgrade a German Mini S to an English one.
I tried to replace the 'GetRUUinfo.exe' and use the 'RomUpgradeUtility_noID' but failed. When using 'RomUpgradeUtility_noID', it raised 'File Open' error.
Anyone can help?
negatong said:
I have the same problem, want to upgrade a German Mini S to an English one.
I tried to replace the 'GetRUUinfo.exe' and use the 'RomUpgradeUtility_noID' but failed. When using 'RomUpgradeUtility_noID', it raised 'File Open' error.
Anyone can help?
Click to expand...
Click to collapse
Anyone can help?
you need to unlock your phone first. Use lokiwiz. search for the newest version.(only if you want to use a diffrent rom, e.g. not form o2)
after unlocking it connect your phone via usb to you pc. check that your phone was conected propperly with activsync.
then just start the new rom and read what´s written on your screen.
make sure your battery is more then 50% charged.
i you need more help just ask.
freezor said:
you need to unlock your phone first. Use lokiwiz. search for the newest version.(only if you want to use a diffrent rom, e.g. not form o2)
after unlocking it connect your phone via usb to you pc. check that your phone was conected propperly with activsync.
then just start the new rom and read what´s written on your screen.
make sure your battery is more then 50% charged.
i you need more help just ask.
Click to expand...
Click to collapse
My MiniS is SPL2.21.4, can the latest lokiwiz (maybe v0.2b) unlock it?
hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'