Backup????? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Ivan R 4.21 is Def. best rom out there at the moment in terms of speed! After flashing and tweaking my qtek i did a backup with SPB. Unfortunately I tried to do a restore and when rebooting the device is stuck in the boot screen ( 4 colored stripe) Any Ideas, has this happened to any1?

sprite 5.1
sprite 5.1 does the trick. backup works and able to restore without hanging in boot screen (4 coloured stripe). Lots of error messages which i have to have a look at but its a step in the right direction

Related

UPGRADING PDA2K..CAN BACKUP DATA BE RESTORED?

HI,
I HAVE A PRESENT ROM VERSION: 1.22.00WWE FOR MY PDA2K..
AND AM GOING TO UPGRADE THE WHOLE PHONE WITH 1.40WWE...
I HAVE TAKEN A COMPLETE BACK UP ON MY SD CARD(XBACKUP). MY ONLY DOUBT IS ONCE I DO THE UPGRADE..CAN I RESTORE MY BACKED DATA FROM XBACKUP OR NOT? PLS HELP..IF NOT I HAVE A LONG PROCESS TO GO BY BACKING UP EVERYSINGLE BIT SEPERATELY.
REGARDS
FYI, based on what I have experience with the 1.40.00WWE ROM, if using xBackup, the data can be restored completely, HOWEVER, for some strange reason, the camera will not work. I did this upgrade sometime back and and had to re-install every application I had once the flash was complete just to get the camera to work.
FYI, based on what I have experience with the 1.40.00WWE ROM, if using xBackup, the data can be restored completely, HOWEVER, for some strange reason, the camera will not work. I did this upgrade sometime back and and had to re-install every application I had once the flash was complete just to get the camera to work.
Same experience
I had the exact same experience with my PDA2K. Everything restores and works great, except the camera. It gives an error when you start it. Since I never use the camera, I just left it as-is so I have no camera.
Restoring from a backup after a ROM upgrade is possible, however it is highly NOT recommended.
I have recently been successful in using Sprite Backup to perform a complete backup of all applications without any camera issues. This seems like the safest method to go following a hard reset.
Hope this helps.
hi
KyuZo said:
I have recently been successful in using Sprite Backup to perform a complete backup of all applications without any camera issues. This seems like the safest method to go following a hard reset.
Hope this helps.
Click to expand...
Click to collapse
after i use sprite back up. i cant receive text message.
HELP . I was updating the ROM of my QTEK 9090 and during the procedure the SYSTEM of CLIENT froze and I had to interrupt the updating.
Now I have on the screen of the QTEK a "USB - V2. 07" line and the QTEK doesn't react to any imput.
I tried also the soft reset and the hard reset (soft reset + ON/OFF button ?)
What can I do?
i actually just recently tried to restore my device after doing an EXT ROM upgrade and in brought my EXT ROM back to the original one that i had before.....which if you think about it makes sense since your extended rom is within the windows file system if you restore from a back up it puts back whatever was in that file before....so, thats probably why some things won't work properly....i decided not to do the upgrade agian cuz i don't have the time to reinstall everything at the moment....cheers....
The SMS bug is caused by Sprite Backup. If you use an old version after a hard reset of the PPC, you will loose the SMS function.
Solution:
Get the latest Sprite Backup and backup using that and than hard reset the PCC, upgrade the ROM en restore all data.
But I guess it is too late now...
Eternity

2.26 update and Spb backup plus issues

after upgrade ti tmobile 26 Rom when i tried to restore my Spb backup file after soft reset my mda freezes on the welcome screen showing "windows mobile" witha blue background i also removed the battery and tried but that also did'nt work pls can any one help me with this.
try to hard reset the phone, and remeber that when You restore from backup on other version of rom (when You change rom) cannot restore system data, because You update registry and files with information from other version of WM.

Is my Wizard a brick after upgrade and attempted SPB restore

Greetings,
Ive just upgraded to the latest xcelencin ROM without issue.
When I attempted to restore (using SPB) from the backup taken just before the ROM upgrade SPB complained that the restore was not responding, so I cancelled it.
Now the machine will not boot past the Windows Mobile 5 splash (afer the Tmobile splash).
Any ideas?
Thanks
if it gets to the win mobile screen, u can probably re flash it. should work then.
Did the same on mine , had to hard reset using comms manager and voice dial buttons and reset button. think it was caused by using spb backup after changing rom.
Guys and gals, NEVER restore with Spb backup (or, for that matter, ANY backup app unless it's called Sprite Backup) after an OS upgrade!!!!
Read http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1270&more=1&c=1&tb=1&pb=1 for more info on all this (you may want to search for (Ctrl-F) "device upgrade" to find the relevant info ASAP.)
had the same exact problem - upgraded from xelencin's 2.24 rom to the 2.26 rom - and tried a restore - no go - had to hard reset and start from scratch

backup, upgrade rom, restore questions

I have a Tmo mda gen 3
task: upgrade rom to faria
So I wanted to try the new wm6 rom (faria) so I starting reading and reading here on XDA and other places for any and all information about the best way to do an upgrade, mind you I already upgraded to 2.24 so my mda is already unlocked and ready to get flashed.
So I did a backup with sprite, I didnt do a updatefile step which is suppose to make an upgrade file so when you do get the new rom on its suppose to help ,but anyways I got a backup.
I flashed the rom to my mda and I had it working, just like everyone said, it was faster, more toys and seemed to work!
Now I did a (selective) restore (only restoring needed stuff), well... sprite warned about rom versions ,but it restored my files including my registry.
low and behold EVERY one of my programs worked, GPS, google maps, etc
,but 2 issues I can not resolve.
timewizard.exe randomly pops up
voicecommand does not work
so it appears the only advice for the timewizard.exe was reflash , which I have done a few times in trying to get voicecommand working ,but the popup message seems to come back, mainly after a registry restore.
voice command is the bigger one, it appears when I restore the registry it blows away some voice command entries from the pre installed voice command 1.6 and then voicecmd.exe does not want to run.
So my question is I am sooooo close to being able to make a backup change roms and get EVERYTHING back WITHOUT reinstall of software I can taste it ,but I need some input!
anyone know some good registry tools / editing suggestions to backup the registry and restore it without killing voice command?
Jeff
Try flashing back and creating an upgrade file. I'd love to know whether it works ;-)
Thats what I did and it worked, however what I did first was
flash to the orginal rom, 2.24 xcel
I restored the sprite backup , however voice command didnt even work going back to orginal rom.
then I removed voice command 1.5 from installed programs.
cleaned up some file space only had 6 meg left on main storage.
then I create the updatefile and saved it to sd card.
finally did another complete backup
flashed to new rom and then did a restore and now voice command works, I will be doing some more testing ,but I think I got it.
if I would have had to install each program seperately that would have killed me!
jeff
well.. forget what I just said.... nothing works!
back to the drawing board......
all the files restored correctly ,but the registry did not restore when using the update mode AND the updatefile.
none of my programs appeared in the start menu and none of the registry entires were restored....
I'll try doing some manually restoreing and see what I get... maybe I missed something....
Jeff
well... I hope my ramblings help someone else!
so I think the key here was simpling removing voice command from the backup file and upon restore everything will work.
so in short, backup upgrade rom , restore works with sprite , but without using the updatefile mode as it seems it just ignores the windows folder and the registry , so whats the point?
I test some more and post my comments to help others who do not want to reinstall everything when they upgrade rom's.
If you get this to work, that would be great, but I think you are playing with a loaded gun trying to do this. Many things are very different between WM5 and WM6. Depending on the type of backup done and what all gets restored, I can see corruption of the registry, and things just not being put in the right place.
Well... so far ALL my apps are working, gps, google, opera, etc about the only thing now is I am getting a Notification
TimeWizard.exe could execuite.
I am hunting that one down in the reg right now.
any ideas?
jeff
Well ... to follow up my thread with my self and maybe help a few others.
the last issue I had after a rom upgrade and a restore was the dreaded timewizard.exe notification popup when you turn on the mda or come back from power save.
after hours/days of messaging around I found that in the "Task Manager" tool you can view Notifications and in there I found timewizard.exe listed a few times, I just assume it had this as a warning/notification and was simply "Notifing" me of a "past" problem. after I cleared it out of there the mda has not shown any more Can not execute TimeWizard.exe popups!
I hope this help anyone else with this issue.
Jeff

Sprite backup

i just flashed my Tilt from ATT wm6 to HTC wm6.1
I created a backup file on Sprite Backup. Now i want to restore it and it says that it can cause significant problems if i restore from a different ROM. And wants me to select a Device Upgrade File. Where do i find a Device Upgrade File?
You shouldn't do upgrades from ROM to ROM (especially if it's from 5 to 6 or 6 to 6.1). There's a whole new registry usually and a lot of different things. Just add the program files back and stuff like that, but not the registry. Better yet, reinstall everything manually.
Okay, darn. lol
Now Im learning.
Thanks
starclassic said:
i just flashed my Tilt from ATT wm6 to HTC wm6.1
I created a backup file on Sprite Backup. Now i want to restore it and it says that it can cause significant problems if i restore from a different ROM. And wants me to select a Device Upgrade File. Where do i find a Device Upgrade File?
Click to expand...
Click to collapse
Just thought i'd share, the latest version of SPB backup does let you
restore after ROM upgrade (ROM upgrade mode) & also restore a backup on another device (device upgrade mode)
here's the link: http://www.spbsoftwarehouse.com/products/backup/?en
Cheers.
The Reaper said:
Just thought i'd share, the latest version of SPB backup does let you
restore after ROM upgrade (ROM upgrade mode) & also restore a backup on another device (device upgrade mode)
here's the link: http://www.spbsoftwarehouse.com/products/backup/?en
Cheers.
Click to expand...
Click to collapse
Warning: spb does not yet fully support WM6.1 for his Backup. With Kaiser (WM6.1) it does not work properly (lot of device hangs).
I Think its bricked
I when ahead and downloaded the new rom with WM6.1 for the ATT TILTfrom the HTC website and did everything to the bone and used sprite backup to backup my files but upon restoring them, my screen just boots through att logo and then shows the flying 3G symbols and then blank screen. I can get to the boot loader and but when I try to reflash my phone, using hard spl it says it cannot find my phone. I have spl 3.56 on my phone. Can anyone help me?
When you're in bootloader mode, just flash to the stock ROM and you should be fine.
Thanx all!
I just want to say thanx to everyone who responded and great thanx or asfoor for the wonderful solution for this problem which can be found here.....
http://forum.xda-developers.com/showthread.php?t=348659

Categories

Resources