Related
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Do you have a copy of the Wizard Love rom? If so, install that in bootloader mode. Remember to plug your USB cable into the phone.
drivex said:
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Click to expand...
Click to collapse
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
drivex said:
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
Click to expand...
Click to collapse
I would suggest flashing back to a carrier aku2.x rom and ensure that your phone will come up properly on it. If it does then good, it's most likely not a serious hardware issue, if not then you might be out of luck.
looks like a brick to me..
So sorry m8.
I hope you can revive it !
Had similar problem with the Super rom.What worked for me was taking a back up on the memory card and reflashing from the card.Read the Wiki about details on how to go about it.
Try to flash the latest t-mobile ROM found on their site if all the suggested doesnt work..
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
I've done. I used method with mtty and i copied os to sd card, after that i reflashed using minisd card and it works. Thx for everyting, u guyz do great job here hehe
Me too !
cyberdrakula said:
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
Click to expand...
Click to collapse
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
cachep2004 said:
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
Click to expand...
Click to collapse
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Pls show me another ways !
UfOuN said:
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Click to expand...
Click to collapse
I'm living vietnam, so i'm trying to find out another ways, but i think they have no equipments.
Bless god for me.............pls
Revive Wizard
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Thanks alot !
sleurhut said:
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Click to expand...
Click to collapse
Thanks alot my friend, I will do it !
"FORMAT FAIL" again again pls ... help me !
( I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...)
Pls ! Help me...."FORMAT FAIL" again again pls ... help me !
The hard reset doesnt work
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
ecomajor said:
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
Click to expand...
Click to collapse
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
mfrazzz said:
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
Click to expand...
Click to collapse
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
ecomajor said:
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
Click to expand...
Click to collapse
Not that I know of. Thats one of the reasons its recommended you start with a battery that has over 50% charge (personally I never flash with less than 100% in case something goes wrong). Not saying you didn't do that, but you appear to now be trying to work with a dead (or almost dead) battery, and that will only make things worse if you try to flash and then the battery dies in the middle (maybe not worse, but it sure won't help).
Like I said, you'll need to find someone with a similar phone or see if your local cell provider office will let you charge it (or swap it for a charged battery).
I got my ppc back up and I tried reflashing again and I have almost the same issue. It says format is successfull but then it gets stuck at the blue screen.
Hello,
What is the worse thing that can happen during a upgrade ? Yes a powerfailure and it happend to me !!!
The result: Nothing works anymore. When I press the power button on my QTek9090, nothing happens !!! When I put it in the cradle only the red led turns on and active sync says: no device connected even if I try manually.
Anyone Any solution or can I trow my PDA in the bin ?!?
I'm open for any suggestions
try to hard reset...
AddAn
error upgrading, BIG problem !?!?!?!?! reset
Hello Addan,
I tried all resetting methodes found here. Nothing works
MeItIs said:
Hello Addan,
I tried all resetting methodes found here. Nothing works
Click to expand...
Click to collapse
Don't worry. I used a GSM rom on my CDMA phone, then nothing worked. Even all type of reset, they did not work. Just find out a correct ROM to reflash it, then should be fine. Now my phone has 90% of function recovery
MeItIs said:
Hello,
What is the worse thing that can happen during a upgrade ? Yes a powerfailure and it happend to me !!!
The result: Nothing works anymore. When I press the power button on my QTek9090, nothing happens !!! When I put it in the cradle only the red led turns on and active sync says: no device connected even if I try manually.
Anyone Any solution or can I trow my PDA in the bin ?!?
I'm open for any suggestions
Click to expand...
Click to collapse
I suggest you to take out the battery out for quite sometime, let the backup battery die. Power it up later on and follow flashing procedure again.
It is always suggested to use Laptop for upgrading as they dont get affected by power shutdown for short time.
Hello Folks,
I tried all suggested til now. I took out the battery for more than a week but the problem is (and was) that I couldn't get a connection anymore with the Qtek thru activesync 4.5.0
The device isn't seen by the computer. Not even when I say activsync to connect to a device.
Still open for more suggestions
qtek doesnt do anyting
if your qtek doesnt doe anything any more try giting it in to bootloader mode and the try to reflash it if you cant get in to bootloader mode your device is nearly finished and you cant do anything more with it the return it to qtek and let them put a new flash chip in it
or get your hand on a new flash chip and a good manual of getting it opend and let someone who can reather good solder solder the old flash chip out of your device and let him put the new one in it and your device must be okaey after that and you can havefun with your device and the when you upgrade you qtek do it eith a laptop because laptops have an battarey that is capebale of work for 1 hour when the power is down or with a traffel battarey it can work on full loaden one for 3,5 hours
just baught it, it worked fine.. then i tried to install HARD SPL, my computer froze and restarted.. i tried to do it again.. did the same..
so then i tredi to install a rom ( probs a stupid idea).. it loaded up to 100% then told me the rom was corrupt! and it refused to get out of the triband bootloader screen!.. i tried to hardreset it.. stayed in bootloader screen.. tried doing hardSPL again.. gave me erros, and asked me to do a recovery.. didn;t work.. tried to re-flash the rom.. no luck..
then i tried mtty, followed the commands given.. this time it reset and got to the roms loading screen.. but doe snot load past there..
now.. it wont detect USB wont load... nothing.. hard reset doesn;t work..
wheni connect usb cable it comes up with an orange light..
PLEASE !HELP!!!! :'( :'(
What OS are you running?
I had to use XP to unlock my phone. If all else fails, you should have a 1 year manufactures warranty on the phone. Just call them and say this thing 'just stopped working' and cross your fingers.
running xp.. the warranty it void... if anyone has any idea.. PLEASE HELP!! :'(
http://forum.xda-developers.com/showthread.php?t=423486
wish you a good luck!
I can't help you ,
wish you!
ardley216 said:
just baught it, it worked fine.. then i tried to install HARD SPL, my computer froze and restarted.. i tried to do it again.. did the same..
so then i tredi to install a rom ( probs a stupid idea).. it loaded up to 100% then told me the rom was corrupt! and it refused to get out of the triband bootloader screen!.. i tried to hardreset it.. stayed in bootloader screen.. tried doing hardSPL again.. gave me erros, and asked me to do a recovery.. didn;t work.. tried to re-flash the rom.. no luck..
then i tried mtty, followed the commands given.. this time it reset and got to the roms loading screen.. but doe snot load past there..
now.. it wont detect USB wont load... nothing.. hard reset doesn;t work..
wheni connect usb cable it comes up with an orange light..
PLEASE !HELP!!!! :'( :'(
Click to expand...
Click to collapse
You are first going to have to determine if your phone is truly unlocked.
I am not sure that you phone is bricked. But it does sound like you are going to have to be creative to undo what you have done. If you are able I would suggest flashing hardSPL via SD. Please go here: http://forum.xda-developers.com/showthread.php?t=433835
ok i'll try this now.. can someone tell me what i need to do after this if it fails??? desperate here ..
thanks so far!!
ardley216 said:
ok i'll try this now.. can someone tell me what i need to do after this if it fails??? desperate here ..
thanks so far!!
Click to expand...
Click to collapse
One step at a time. You might have to get a card reader to load the microsd, they make adapters for them to fit a standard SD slot, plug it into your USB and load into it.
yeah.. i happened to lose my adapter as soon as i need it.. i have a hermes. can i run the software through that???
thanks
ardley216 said:
yeah.. i happened to lose my adapter as soon as i need it.. i have a hermes. can i run the software through that???
thanks
Click to expand...
Click to collapse
you should be able to load the software onto your SD card via the hermes. Once have done this you can then move the SD card over to your tilt and go from there. It's very important that you take your time and read the instructions. This is one time that you dont want to rush through them.
ok so i tried to follow the microSD card flashing method.. i dragged and droped the nbh file ( it was renamed) to the card.. put it in my kaiser.. held power button and camera button.. went to the tri coloured screen for about 2 seonds now its got a white screen just saying "Loading..." does this just mean its loading the rom??
thanks
an hour and half later.. still the same screen... is this phone bricked...?
ardley216 said:
an hour and half later.. still the same screen... is this phone bricked...?
Click to expand...
Click to collapse
ITS NOT BRICKED!!! If you are seeing any screen at all it is not bricked. if the rom is not flashing or having trouble, double check the hardspl. And lastly, when was the last time you wiped?
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
did u try to hard reset it?
can u still enter bootloader mode?
if u can still enter bootloader then try flash another ROM
I think there is a timebomb in the Rom you are using.
Go to bootloader menu, connect to usb, and try to flash an other rom by installing via Windows.
okay, but what is the hard reset? Is that a red button on my device back?
if it is, i try this, but it isnt solve my problem.
and how i can go the bootloader menu?
thank a lot.
Don't worry...just try the hardreset:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If this does not work...just flash another rom...it really seems to have this timebomb issue...you don't have a hardware problem...it's just the software.
here's a video instruction for the hard reset:
http://www.youtube.com/watch?gl=DE&hl=de&v=Eqg8XFJyHBY
thanks a lot, the hard reset worked!!!
thanks!!!
i will flash a new 6.5 ROM.
VorosAdam said:
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
Click to expand...
Click to collapse
I'm curious wich rom you use?
you CHICKEN >"<
quack quack
vodanh2025 said:
you CHICKEN >"<
Click to expand...
Click to collapse
lol chicken?
Sorry, but its dont solve my problem, all 6.5 ROMs go to freeze a few sec/minutes when i use... And the phone function and network connection also dont work. Big trouble (
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
VorosAdam said:
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
Click to expand...
Click to collapse
Flash the latest Hard SPL http://forum.xda-developers.com/attachment.php?attachmentid=179550&d=1240516932
I'm curious, what way did you flash these roms. Are you using USPL or HSPL or have you just flashed these straight from stock?
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
VorosAdam said:
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
Click to expand...
Click to collapse
2 versions of HSPL, 1.14 & 1.56. You will need HSPL 1.56 on your device to be able to use roms based on 1.56+
thanks a lot, i flash the new HSPL, and now, all phone function back to normal!!!
THANKS!!
Impressed by the support
Hello,
I was watching this thread continously and whenever i try to jump in to help you with tips about flashing, someone would have done it already.
I feel somewhat releived to know that your Kit(d) is back on track.
I like this forum very much not just for the solutions but also for the people's attitude.
After I get out my diamond from my pc and than turned off it cannot start, it stoods on screen when it shows me version of my radio and ROM. I know that I have to do hard-reset but i dont want to, because i were so dumb that I dont backed up my mdata and programs which Ihave installed in Memory. Is there any chance to turn it on without the hard-reset???
Thx in advance.
betacheer said:
After I get out my diamond from my pc and than turned off it cannot start, it stoods on screen when it shows me version of my radio and ROM. I know that I have to do hard-reset but i dont want to, because i were so dumb that I dont backed up my mdata and programs which Ihave installed in Memory. Is there any chance to turn it on without the hard-reset???
Thx in advance.
Click to expand...
Click to collapse
do you mean bootloader (Tri-Coloured Sceen) Or the splash screen (Black Screen with touch diamond on it)?
I suggest you do a hard reset, and check this thread on how to easly back up ur programs, settings and manila config for future use using SASHIMI
http://forum.xda-developers.com/showthread.php?t=538513
Stuck in Bootloader screen
Whlie trying to upgrade the ROM on my Touch Diamond something happend so i got an error and the upgrade stopped. Now i cant continue the upgrade becouse my pc wont recognize the phone when i connect it with the usb-cabel. When i try to run the upgrade again i just get an error saying that there is something wrong with the connection.
I have tried hard reset but nothing works.
Hope someone can help me with this problem.
Thanks
/Kenneth
KenOslo said:
Whlie trying to upgrade the ROM on my Touch Diamond something happend so i got an error and the upgrade stopped. Now i cant continue the upgrade becouse my pc wont recognize the phone when i connect it with the usb-cabel. When i try to run the upgrade again i just get an error saying that there is something wrong with the connection.
I have tried hard reset but nothing works.
Hope someone can help me with this problem.
Thanks
/Kenneth
Click to expand...
Click to collapse
i think I am in same situation. phone is bricked :/
I dont think your phone is bricked, put your phone into bootloaded mode, connect phone to pc and flash the nbh file using CustomRUU. That should fix things
Dom1n8tr1x said:
I dont think your phone is bricked, put your phone into bootloaded mode, connect phone to pc and flash the nbh file using CustomRUU. That should fix things
Click to expand...
Click to collapse
each bootloader i have tried using the different hard spl version gets as far as the progress bar but fails at 0% with 262 connection error. tried about 6 different hard spl, signed unsigned olinex, customRUU. each of them all fail at 0% of progress bar.
will try it again today.
sorry betacheer for the hijack, but hope this helps you out in some way too.